F4651

SAW Bandpass Filter F4651 Features RF bandpass filter for CDMA450 A-Band Rx. Part Usable bandwidth 5MHz (462.5 MHz ~ 467.5 MHz) High attenuation No matching 50Ω single-ended operation Ceramic Surface Mounted Device Package ( 3.8 mm × 3.8 mm ) RoHS Compliant 3.80±0.15 1.00±0.1 1.90±0.1 1 6 6 1 2 ITF 4651 5A1 3.80±0.15 5 5 2 1.40±0.15 3 4 4 3 1.27±0.1 Dimensions shown are nominal in millimeters Body : Al2O3 Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating Pin Configurations 2 5 1, 3, 4, 6 Input Output Case ground Maximum Ratings Parameters Operating Temperature Range Storage Temperature Range Power Handling Capability Electrostatics Sensitive Device (ESD) Unit °C °C dBm Minimum -30 -40 Typical 25 Maximum 85 85 27 I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. 0.64±0.1 Package Dimensions F4651 2006-06-08 NR3014-AS05 1/7 SAW Bandpass Filter F4651 Specifications Minimum Center Frequency ( Fc ) Insertion Loss (In Fc +/- 2.5 MHz) Amplitude Ripple (In Fc +/- 2.5 MHz) VSWR (In Fc +/- 2.5 MHz) Relative Attenuation 0.3 MHz ~ 452.5 MHz 452.5 MHz ~ 457.5 MHz 485.0 MHz ~ 507.5 MHz 507.5 MHz ~ 1200 MHz 1200 MHz ~ 1700 MHz 1700 MHz ~ 2000 MHz Temperature Range (Operational) Input RF Power (In Fc +/- 2.5 MHz) Input/Output Impedance 50 45 35 40 35 25 20 -30 50 43 45 25 85 27 ℃ dBm Ohms dB Typical 465.0 3.0 1.0 1.5 Maximum 3.8 2.2 2.4 Unit MHz dB dB Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 3) All attenuation measurements are measured relative to insertion loss I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F4651 2006-06-08 NR3014-AS05 2/7 SAW Bandpass Filter F4651 Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Input 50Ω Output 50Ω Marking Configuration 1) ITF2) 46513) 5A14) 1) Pad Number 1 Index 2) Manufacturer name 3) Marking Number 4) Lot Number * Ink or Laser Marking available I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F4651 2006-06-08 NR3014-AS05 3/7 SAW Bandpass Filter F4651 Typical Performance ( at 25℃ ) 16 Dec 2003 20:36:09 5_:-2.0193 dB REF -2.469 dB 465.000 000 MHz PRm Cor 5 1_:-50.453 dB 452.5 MHz 2_:-54.766 dB 457.5 MHz 3 4 3_:-2.9722 dB 462.5 MHz 4_:-2.2885 dB 467.5 MHz CH1 S 21 log MAG 10 dB/ 1 2 CH1 CENTER 465.000 000 MHz SPAN 100.000 000 MHz CH2 S 21 log MAG 1 dB/ REF -2 dB 16 Dec 2003 20:38:21 2_: .6511 dB 5.000 000 MHz REF=1 mean:-2.259 8 dB s.dev: .2627 dB p-p: 1.0159 dB 2 1 PRm Cor CH2 CENTER 465.000 000 MHz SPAN 30.000 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F4651 2006-06-08 NR3014-AS05 4/7 SAW Bandpass Filter F4651 Input / Output VSWR Charts 17 Sep 2003 11:15:42 CH2 S 11 SWR 500 m / REF 1 CH2 S 22 SWR 500 m / REF 1 17 Sep 2003 11:17:27 PRm Cor PRm Cor CH2 CENTER 465.000 000 MHz SPAN 20.000 000 MHz CH2 CENTER 465.000 000 MHz SPAN 20.000 000 MHz Input / Output Smith Charts CH1 S 11 1 U FS 1_: 55.402 17 Sep 2003 11:18:05 2.7832 952.6 pH 465.000 000 MHz CH1 S 22 1 U FS 1_: 55.006 17 Sep 2003 11:18:52 5.4688 1.8718 nH 465.000 000 MHz PRm Cor PRm Cor 1 1 CH1 CENTER 465.000 000 MHz SPAN 100.000 000 MHz CH1 CENTER 465.000 000 MHz SPAN 100.000 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F4651 2006-06-08 NR3014-AS05 5/7 SAW Bandpass Filter F4651 Packing Specification 1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel ) 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification 1. Leader part and vacant position specification Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. END START Tape Running Direction 2. Tensile strength of carrier tape 4.4N/mm width Top cover tape Direction of pull 3. Top cover tape adhesion 1) pull off angle : 0~15° 2) speed : 300mm/min 3) force : 20~70g Carrier tape 0~15 degree I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F4651 2006-06-08 NR3014-AS05 6/7 SAW Bandpass Filter F4651 Carrier Tape Dimensions [unit : mm] A B C D E F 4.30 ± 0.1 4.30 ± 0.1 7.25 ± 0.1 1.70 ± 0.1 12.00 ± 0.1 8.00 ± 0.1 Part Direction Tape Running Direction Reel Dimensions [unit : mm] I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F4651 2006-06-08 NR3014-AS05 7/7