F8814

SAW Bandpass Filter F8814 Features CDMA applications Usable bandwidth of 25 MHz No impedance matching require for operation at 50 Ceramic Surface Mounted Device Package ( 3.0 mm * 3.0 mm ) Single-ended Operation RoHS Compliant Package Dimensions 1 6 6 1 2 I 8814 5 5 2 3 4 4 3 Dimensions shown are nominal in millimeters Body : Al2O3 Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating Pin Configurations 2 5 1, 3, 4, 6 Input Output Case ground Maximum Ratings Parameters Operating Temperature Range Storage Temperature Range Power Handling Capability Electrostatics Sensitive Device (ESD) Unit ℃ ℃ dBm Minimum -30 -40 Typical 25 Maximum 85 85 - I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F8814 2007-05-29 NF7009-AS01 1/7 SAW Bandpass Filter F8814 Specifications Minimum Center Frequency ( Fc ) Insertion Loss (In Fc +/- 12.5 MHz) Amplitude Ripple (In Fc +/- 12.5 MHz) VSWR (In Fc +/- 12.5 MHz) Relative Attenuation DC ~ 779.0 MHz 779.0 MHz ~ 849.0 MHz 914.0 MHz ~ 951.0 MHz 951.0 MHz ~ 981.0 MHz 981.0 MHz ~ 1049.0 MHz 1049.0 MHz ~ 2000.0 MHz Temperature Range (Operational) Input RF Power (In Fc +/- 12.5 MHz) Input/Output Impedance 45.0 40.0 23.0 40.0 50.0 40.0 -30 51.0 44.0 29.0 53.0 61.0 44.0 25 10 50 85 ℃ dBm Ohms dB Typical 881.5 1.77 0.67 1.7 Maximum 3.0 1.3 2.5 Unit MHz dB dBp-p Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 3) All attenuation measurements are measured relative to insertion loss I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F8814 2007-05-29 NF7009-AS01 2/7 SAW Bandpass Filter F8814 Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Input 50Ω Output 50Ω Marking Configuration 1) I2) 88143) 1) Pad Number 1 Index 2) Manufacturer name 3) Marking Number * Ink or Laser Marking available I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F8814 2007-05-29 NF7009-AS01 3/7 SAW Bandpass Filter F8814 Typical Performance ( at 25℃ ) CH1 S21 LOG 10 dB/ REF 0 dB 29 May 2007 14:13:33 5:-2 . 0841 dB 881. 500 000 MHz CH1Markers Cor 5 1:-55 . 636 dB 779. 000 MHz 2:-51 . 547 dB 849. 000 MHz 3:-29 . 088 dB 914. 000 MHz 4:-45 . 732 dB 3 951. 000 MHz 4 2 1 CENTER881. 500 000 MHz SPAN 300. 000 000 MHz CH2 S21 LOG 1 dB/ REF 0 dB 29 May 2007 14:13:43 2:- . 48400 dB 25. 000 000 MHz CH2Markers mean . 3163 dB :-2 s. dev: . 15970 dB p-p : . 68850 dB REF=1 2 1 Cor CENTER881. 500 000 MHz SPAN 100. 000 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F8814 2007-05-29 NF7009-AS01 4/7 SAW Bandpass Filter F8814 Input / Output VSWR Charts CH1 S11 SWR 1/ REF 1 29 May 2007 14:14:02 3: 1. 4630 881. 500 000 MHz CH1 S22 SWR 1/ REF 1 29 May 2007 14:14:13 3: 1. 4579 881. 500 000 MHz CH1 Markers Cor 1: 1. 1101 869. 000 MHz 2: 1. 6621 894. 000 MHz Cor CH1 Markers 1: 1. 0689 869. 000 MHz 2: 1. 6925 894. 000 MHz 3 2 CENTER 881. 500 000 MHz 1 SPAN 300. 000 000 MHz CENTER 881. 500 000 MHz 1 3 2 SPAN 300. 000 000 MHz Input / Output Smith Charts 29 May 2007 14:14:07 9. 3773 pF 881. 500 000 MHz 29 May 2007 14:14:18 9. 3821 pF 881. 500 000 MHz CH1 S11 1 U FS 3: 56. 582 -19 . 254 CH1 S22 1 U FS 3: 53. 232 -19 . 244 CH1 Markers Cor 1: 45. 699 -935 . 55 m 869. 000 MHz 2: 53. 830 -26 . 383 894. 000 MHz Cor CH1 Markers 1: 50. 287 0. 5859 869. 000 MHz 2: 54. 400 -27 . 334 894. 000 MHz 1 3 1 3 2 2 CENTER 881. 500 000 MHz SPAN 300. 000 000 MHz CENTER 881. 500 000 MHz SPAN 300. 000 000 MHz I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F8814 2007-05-29 NF7009-AS01 5/7 SAW Bandpass Filter F8814 Packing Specification 1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel ) 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL REEL CARRIER TAPE Tape Specification 1. Leader part and vacant position specification Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. END START Tape Running Direction 2. Tensile strength of carrier tape 4.4N/mm width Top cover tape Direction of pull 3. Top cover tape adhesion 1) pull off angle : 0~15° 2) speed : 300mm/min 3) force : 20~70g Carrier tape 0~15 degree I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F8814 2007-05-29 NF7009-AS01 6/7 SAW Bandpass Filter F8814 Carrier Tape Dimensions [unit : mm] A B C D E F 3.40 ± 0.1 3.40 ± 0.1 7.25 ± 0.1 1.70 ± 0.1 12.00 ± 0.1 8.00 ± 0.1 Part Direction Tape Running Direction Reel Dimensions [unit : mm] I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. Rev. Date Rev. F8814 2007-05-29 NF7009-AS01 7/7