SAW Bandpass Filter 912MHz
Features
RF bandpass filter for RFID Usable bandwidth 7MHz (908.0MHz ~ 915.0 MHz) No matching single-ended operation Ceramic Surface Mounted Device Package ( 3.0 mm × 3.0 mm )
Package Dimensions
1
6
6
1
2
I 9124
5
5
2
3
4
4
3
Dimensions shown are nominal in millimeters Body : Al2O3 Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating
Pin Configurations 2 5 1, 3, 4, 6 Input Output Case ground
Maximum Ratings
Parameters Operating Temperature Range Storage Temperature Range Power Handling Capability Electrostatics Sensitive Device (ESD) Unit °C °C dBm Minimum -30 -40 Typical 25 Maximum 85 85 30
I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809
Part No. Rev. Date Rev.
F9124 2008-08-11 NR6004-AS02 1/7
SAW Bandpass Filter 912MHz
Preliminary Specifications
Minimum Center Frequency ( Fc ) Insertion Loss (908.0 ~ 915.0MHz) Amplitude Ripple (908.0 ~ 915.0MHz) VSWR (908.0 ~ 915.0MHz) Typical 912.0 2.0 0.2 1.5 Maximum 3.0 0.8 2.0 Unit MHz dB dB
Relative Attenuation 0.3 MHz ~ 863.0 MHz 863.0 MHz ~ 894.0 MHz 942.0 MHz ~ 962.0 MHz 962.0 MHz ~ 3000 MHz Temperature Range (Operational) Input/Output Impedance
30 30 -30
45 40 35 40 25 50
85
dB
℃ Ohms
Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances
I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809
Part No. Rev. Date Rev.
F9124 2008-08-11 NR6004-AS02 2/7
SAW Bandpass Filter 912MHz
Matching Schematic
( Actual matching values may vary due to PCB layout and parasitics )
Input 50Ω
Output 50Ω
Marking Configuration
1)
I2) 91243)
1) Pad Number 1 Index 2) Manufacturer name
3) Marking Number
I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809
Part No. Rev. Date Rev.
F9124 2008-08-11 NR6004-AS02 3/7
SAW Bandpass Filter 912MHz
Typical Performance ( at 25℃ )
I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809
Part No. Rev. Date Rev.
F9124 2008-08-11 NR6004-AS02 4/7
SAW Bandpass Filter 912MHz
Input / Output VSWR Charts
Input / Output Smith Charts
I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809
Part No. Rev. Date Rev.
F9124 2008-08-11 NR6004-AS02 5/7
SAW Bandpass Filter 912MHz
Packing Specification
1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel ) 2. Taping Structure : The tape shall be wound around the reel in the direction shown below.
TOP COVER TAPE
REEL REEL
CARRIER TAPE
Tape Specification
1. Leader part and vacant position specification
Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min.
END START
Tape Running Direction
2. Tensile strength of carrier tape 4.4N/mm width
Top cover tape Direction of pull
3. Top cover tape adhesion
0~15 degree
1) pull off angle : 0~15° 2) speed : 300mm/min 3) force : 20~70g
Carrier tape
I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809
Part No. Rev. Date Rev.
F9124 2008-08-11 NR6004-AS02 6/7
SAW Bandpass Filter 912MHz
Carrier Tape Dimensions [unit : mm]
A B C D E F
3.40 ± 0.1 3.40 ± 0.1 7.25 ± 0.1 1.70 ± 0.1 12.00 ± 0.1 8.00 ± 0.1
Part Direction
Tape Running Direction
Reel Dimensions [unit : mm]
I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809
Part No. Rev. Date Rev.
F9124 2008-08-11 NR6004-AS02 7/7