Connector Product Locations
With manufacturing facilities, sales representatives and distributors located
worldwide, please visit our website at ww.ittcannon.com for a complete listing and to
find the office nearest you.
GERMANY
Cannonstrasse 1
Weinstadt, 71384
phone: 49.7151.699.0
fax: 49.7151.699.217
HONG KONG
Unit 901 & 912, West Tower
Shun Tak Center
168-200 Connaught Road
Central
phone: 852.2732.2720
fax: 852.2732.2919
ITALY
Via Pietro Panzeri 10
Milano, 20123
phone: 39.2.58180.1
fax: 39.2.8372036
UK
Jays Close, Viables Estate
Basingstoke, RG22 4BA
phone: 44.1256.311200
fax: 44.1256.323356
USA
666 East Dyer Road
Santa Ana, CA 92705
toll free: 1.800.854.3028
phone: 1.714.557.4700
fax: 1.714.628.2142
“Engineered for life” is a registered trademark
of ITT Industries.©2005. All other trademarks
or registered trademarks are property of their
respective owners. All data subject to change
without notice.
www.ittcannon.com
SLC 05-Sept
Interconnect Technologies & Solutions for the Transportation Industry
For over 90 years, ITT has been developing innovative solutions for harsh environment
applications. We have a proven track record of demonstrating our expertise and commitment
to the transportation industry, offering the broadest portfolio of interconnect products.
Off-Road / Heavy Vehicle
Our interconnect range include sealed circulars, plastic and metal shell bayonet coupling
circulars, miniature metal shell circulars, PC board header connectors and sensor and direct
device connectors. ITT is also a systems supplier, providing value-added module and harness
assemblies.
In addition to our SLC/SLE/CLC/APV Vector series,
we also offer these connectivity solutions:
Cannon APD
Cannon CA-Bayonet
In-line and bulkhead sensors resistant
to harsh environmental conditions
(contaminants, vibration and shock).
Signal and power connectors with
exceptional sealing against the ingress
of fluids and will withstand the effects of
high vibrations.
Cannon Trident
Versatile range of electrical connectors
based on a standard contact design.
Options include; industrial grade, harsh
environment and shielded circulars.
Multifunction Grips
Wide range of multifunction grip products that can
be customized to meet your exact ergonomic and
control needs.
The ITT “Engineered Blocks” symbol and the composite ITT Iogo are registered trademarks of ITT Industries. © 2005
Cannon SLC/SLE/CLC/APV Vector
Snap/Clip-Lock Environmental Sealed - Circular . . . . . .SLC/SLC-T/CLC
Engineering Quick Reference Selection Guide - How to Order . . . . . .4-5
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Contact Arrangement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-13
Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Hand Tools, Semi-Automatic Tooling . . . . . . . . . . . . . . . . . . . . . . . .15-18
Test Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
SLE - Snap Lock Environmental Rectangular
Engineering Quick Reference Selection Guide - How to Order . . . .20-21
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Contact Arrangement, Polarization . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-27
Contacts, Stamped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Hand Tools, Semi-Automatic Tooling . . . . . . . . . . . . . . . . . . . . . . . .29-32
Test Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
APV Vector
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Product Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Product Feature
Submersible
Splash Resistant
Snap Lock/No of Latch
Hard Body
In-Line
Bulkhead Mount
PC Mount/Header
Stamped Rem. Cont.
Hand Insertable
Operating Temperature
Current Rating
Adaptable for Sensors
Possibility of Mismating
Susceptibility to Damage
Probability of Unmating in use
Connector Sealing Method
Wire Sealing Method
Positive Polarization
Low Level Signal Performance
Secondary Lock
Automated Contact Insertion
Availability of Power Contacts
Connector Mating Force
Contact Style
Contact Finish
Contact Density
Available Layouts
SLE
SLC
SLC-T
Feed-Thru
CLC
APV Vector
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes / 2
Yes / 2
Yes / 2
Yes / 1
Yes
Yes / 2
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
-40°C to +150°C -40°C to +150°C -40°C to +150°C -40°C to +150°C -40°C to +150°C -40°C to +150°C
6A/13A
6A/13A
6A/13A
6A
6A/13A
13A/25A
No
Yes
Yes
Yes
Yes
Yes
Very Low
Very Low
Very Low
Very Low
Very Low
Very Low
Very Low
Very Low
Very Low
Very Low
Very Low
Very Low
Very Low
Very Low
Very Low
Very Low
Very Low
Low
O Ring Cp
Interfacial
Interfacial
O Ring Cp
O Ring Cp
O Ring Cp
Grommet
Grommet
Grommet
Grommet
Grommet
Ind Wire Sl
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Not Reqd.
Not Reqd.
Not Reqd.
Not Reqd.
Yes
Yes
Possible
Possible
Possible
Possible
Yes
Possible
Yes
Yes
Yes
No
No
Yes
Low
Low
Medium
Low
Low
Low
Pin / Skt.
Pin / Skt.
Pin / Skt.
Pin / Skt.
Pin / Skt.
Pin / Skt.
Ni / Au
Au
Au
Au
Au
Au
Low
High
High
High
High
Low
2
a 2-3-4
19, 28
5, 8, 10,15
5, 8, 10,15
2p, 2s
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
3
Snap/Clip-Lock Environmentally Sealed - Circular
Engineering Quick Reference Selection Guide
Plug
5 Position
4 Position
2 Position
Receptacle
Plug
Contact
Arrangement
Contact
Cannon
1
2
2
Receptacle
2
2
1
1
3
5
4
3
4
1
5
Inline
Feed Thru
Inline
PCB
Inline
Clip Lock
Clip Lock
Clip Lock
Snap Lock
Snap Lock
Specifications
CS-216
CS-216
CS-216
CS-206
CS-206
Plug
086-0066-000 w/Wedgelock
086-0058-000 Standard
086-0058-000 Standard
Contact
Cannon
098532-0000 (5 A)
098532-001 (13 A)
098532-0000 (5 A)
098532-001 (13 A)
Receptacle
086-0061-000 w/Wedgelock
083-0242-000
Contact
Cannon
098531-0000 (5 A)
098531-0001 (13 A)
098530-0000 (5 A)
098530-0001 (13 A)
Terminals
See page 14
See page 14
Contact Cannon
See page 14
See page 14
Features
How to Order
SLC
5
T
13
0
0
Series Prefix
Size/Configuration
Connector Type
Contact Termination
Material/Finish Modifier
Mechanical Modifier
Series Prefix
SLC - Snap-Lock Circular
Size/Configuration
5-5 Cavity Housing
8-8 Cavity Housing
10-10 Cavity Housing
15-15 Cavity Housing
Contact Termination
5-5A
13 - 13 A
Material/Finish Modifier
0 -Standard Assembly (Silicone Elastomer)
1 -Fluorosilicone Elastomer
Mechanical Modifier
Connector Type
0 -Standard Assembly
P - Plug, In-line (Cable-to-Cable)*
R - Receptacle, In-line (Cable-to-Cable)
T - Receptacle, Snap-thru
B - Receptacle, PCB
*Note: In-line Plug mates with all 3 receptacle types (In-line, Snap-thru, and PCB.)
Dimensions shown in mm
Specifications and dimensions subject to change
4
www.ittcannon.com
Snap/Clip-Lock Environmentally Sealed - Circular
Engineering Quick Reference Selection Guide
Plug
15 Position
10 Position
8 Position
Receptacle
Plug
Receptacle
Plug
4
3
12
3
1
7
2
2
8
5
4
7
8
5
3
4
4
2
2
1
3
4
3
6
Receptacle
11
4
13
2
1
5
5
10
9
1
9
9
7
7
8
2
10
14
15
6
6
6
8
10
8
6
8
9
6
7
7
PCB
Inline
Snap-thru
PCB
Inline
Snap-thru
Snap-thru
Snap Lock
(Double)
Snap Lock
(Double)
Snap Lock
(Double)
Snap Lock
(Double)
Snap Lock
(Double)
Snap Lock
(Double)
Snap Lock (Double)
CS-210
CS-210
CS-210
CS-206
CS-206
CS-210
CS-210
098532-0010
098532-0008
098532-0010
098532-0002 (5 A) 098532-0002 (5 A)
098532-0002 (5 A)
098532-0003 (13 A) 098532-0003 (13 A) 098532-0003 (13 A)
086-0060-000
-
-
098533-0010
098531-0002 (5 A) 098530-0002 (5 A)
098531-0003 (13 A) 098530-0003 (13 A)
098533-0002
098533-0003
086-0059-000
See page 14
See page 14
See page 14
See page 14
See page 14
See page 14
See page 14
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
5
3
11
15
14
5
10
1
12
13
5
1
Cannon SLC/SLC-T/CLC
Snap/Clip-Lock Environmentally Sealed - Circular
The Snap Lock Environmental Series is
environmentally sealed connector created for printed
circuit board, black box, cable-to-cable or bulkhead
applications.
When your under-the-hood requirements call for
tough performance, the SLC "snaps" into a tightly
sealed connection that can withstand heat, shock and
vibration. The connector is designed to preserve the
integrity of the solid state package, while protecting
against contaminants - even when unmated.
Gold, tin/lead plated stamped contacts add durability.
A rugged, thermoplastic receptacle body maximizes
performance by withstanding temperature variances
from -40°C to +150°C (material rating).
The SLC series is available in 2, 5, 8, 10, 15 contact
cavity configurations. It can also be adapted to
robotics assembly. Should you requirement demand
higher density configurations, consult Customer
Service.
Product Features and Benefits
· Superior environmental sealing
· Material rating: -40°C to +150°C continuous
operation at rated current
· Available in sizes 2, 5, 8, 10, 15 contacts
· Crimp stamped gold, tin/lead plated contacts
· Hand insertable/removable contacts
· Current rating 5 A and 13 A versions
· Low millivolt drop
· Low contact resistance
· Small footprint on P.C. board and low profile
· Adaptable to robotics assembly
· Latch with tactile and audible feedback
· Increases durability and provides for minimum
installation
· Low installed cost
· Requires less PCB space
Performance Specifications
Contact Resistance
Insulation Resistance
Current Rating
Dielectric Withstanding Voltage
Applicable Cannon Specification
Material Rating Operating Temperature
Crimp Contacts
Wire Size
Wire Insulation Sealing Range
Contact Insertion
Contact Extraction
Contact Retention
Wire Strip Length
10mΩ maximum
20MΩ minimum (USCAR)
5 A signal continuous at 150°C all contacts, 2 position
13 A power continuous at 150°C all contacts, 5 position and 10 position only
1000 Vrms AC at sea level
SLC (CS-206) SLCT 5 & 10 (210) SLCT8 (216) SLCT 15 (206)
-40°C to +150°C
Semi-automatic or hand crimpable or fully automatic
20 - 16 AWG
1,98 (.078) to 3,30 (.130) dia.
No tool required. Suitable for automation.
Rear Removable
20 lbs. Minimum per contact
5,59 (.220) to 5,33 (.210)
Materials and Finishes
Connector Housing
Contacts
Finish
Environmental Seal
High temperature thermoplastic
Copper alloy
Engaging area: Gold over nickel
Crimp/P.C. tail area: Tin/lead over nickel - standard offering
Tin/Lead over nickel - Option #2 all over
High temperature silicone elastomer
Dimensions shown in mm
Specifications and dimensions subject to change
6
www.ittcannon.com
Cannon SLC/SLC-T/CLC
Snap/Clip-Lock Environmentally Sealed - Circular
Contact Cavity Arrangements - Mating Face View
Plug
2
1
1
1
2
3
5
8
3
6
4
4
5
5 Way
2 Way
2
7
8 Way
3
3
2
11
2
1
13
5
10
5
10
9
6
8
4
12
4
14
15
1
9
8
7
6
7
10 Way
15 Way
Receptacle
2
2
3
2
1
4
1
1
3
4
5
2 Way
5 Way
3
12
2
5
10
2
1
1
7
11
8
5
14
15
9
8
7
10 Way
15 Way
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
7
4
13
10
9
6
6
8 Way
3
4
7
8
5
6
Cannon SLC/SLC-T/CLC
Snap/Clip-Lock Environmentally Sealed - Circular
Plug, In-line* (Cable-to-Cable) (Type P) SLC-5, SLC-10
Side View
Plug Assembly
Front-Face View
5 Cavity Housing
Front-Face View
10 Cavity Housing
In-line Plug* (Mates with SLC types R, T, and B)
Housing Size
Rating
Part Number
Description
5
5A
098532-0011
SLC-5P5-00
27,81 (1.095)
A
18,03 (.710)
ØB
5
13 A
098532-0001
SLC-5P13-00
26,80 (1.055)
18,03 (.710)
10
5A
098532-0002
SLC-10P5-00
34,92 (1.375)
24,15 (.990)
10
13 A
098532-0003
SLC-10P13-00
34,04 (1.340)
25,15 (.990)
*Contact lead assemblies are customer terminated and installed. See page 14, part numbers 110238-0488, 110238-2003.
Dimensions shown in mm
Specifications and dimensions subject to change
8
www.ittcannon.com
Cannon SLC/SLC-T/CLC
Snap/Clip-Lock Environmentally Sealed - Circular
Receptacle, In-line* (Cable-to-Cable) (Type R) SLC-5, SLC-10
Side View
Receptacle Assembly
Front-Face View
5 Cavity Housing
Front-Face View
10 Cavity Housing
In-line Receptacle* (Mates with SLC type P)
Housing Size
Rating
Part Number
Description
5
5A
098530-0000
SLC-5R5-00
A
ØB
5
13 A
098530-0001
SLC-5R13-00
23,75 (.935)
18,03 (.710) 24,38 (.960)
10
5A
098530-0002
SLC-10R5-00
31,24 (1.230)
25,15 (.990) 31,62 (1.245)
10
13 A
098530-0003
SLC-10R13-00
30,86 (1.215)
25,15 (.990) 31.62 (1.245)
24,13 (.950)
C Ref.
18,03 (.710) 24,38 (.960)
*Contact lead assemblies are customer terminated and installed. See page 16, part numbers 110238-0446, 110238-2004.
Square Flange
Snaps onto Type R and B connectors
Materials and Finishes
Material: Thermoplastic
Color: Black
Housing Size
Part Number
5
066-9504.000
23,37 (.920)
A
31,24 (1.230)
32,51 - 31,75 (1.280 - 1.250)
10
066-9504-001
28,45 (1.120)
36,32 (1.430)
25,40 - 24,64 (1.000 - .970)
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
9
B Max.
ØC
Cannon SLC/SLC-T/CLC
Snap/Clip-Lock Environmentally Sealed - Circular
Receptacle, Snap-thru* (Type T) SLC-5, SLC-10
Front-Face View
10 Position
Side View
Front-Face View
5 Position
Panel Rear
Face View
Panel Section View
Snap-thru Receptacle* (Mates with SLC Type P)
Housing Size
Rating
Part Number
Description
5
5A
098533-0000
SLC-5T5-00
37,21 (1.465)
ØA
24,13 (.950)
ØB
25,60 (1.008)
ØC
15,62 (.615)
ØD
5
13 A
098533-0001
SLC-5T13-00
36,96 (1.455)
23,75 (.935)
25,48 (1.003)
15,34 (.605)
10
5A
098533-0002
SLC-10T5-00
47,62 (1.875)
31,24 (1.230)
35,05 (1.380)
20,19 (.795)
10
13 A
098533-0003
SLC-10T13-00
47,37 (1.865)
30,86 (1.215)
34,92 (1.375)
19,94 (.785)
*Contact lead assemblies are customer terminated and installed. See page 14, part numbers 110238-0446, 110238-2004.
Dimensions shown in mm
Specifications and dimensions subject to change
10
www.ittcannon.com
Cannon SLC/SLC-T/CLC
Snap/Clip-Lock Environmentally Sealed - Circular
Receptacle, PCB* (Type B) SLC-5, SLC-10
Front-Face View
5 Cavity Housing
Front-Face View
10 Cavity Housing
Side View
In-Line Receptacle
With PCB Contacts
In-line Receptacle* (Mates with SLC Type P)
Size
Rating Part Number
Description
5
5A
098531-0000
SLC-5B5-00
24,13 (.950)
18,03 (.710)
24,38 (.960)
5
13 A
098531-0001
SLC-5B13-00
23,75 (.935)
18,03 (.710)
24,38 (.960)
10
5A
098531-0002
SLC-10B5-00
31,24 (1.230)
25,15 (.990)
31,62 (1.245)
10
13 A
098531-0003
SLC-10B13-00
30,86 (1.215)
25,15 (.990)
31,62 (1.245)
*PCB Contacts are factory installed.
Recommended PCB Layout
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
11
A
ØB
C Ref.
Cannon SLC/SLC-T/CLC
Snap/Clip-Lock Environmentally Sealed - Circular
Receptacle, Snap-thru SLCT-8
48,26
(1.900)
Part No.: 098533-0010 (mates with 098532-0008)
27,56
(1.085)
Receptacle, Feed-thru CLC-2
Part No.: 086-0057-000
13,85
(.550)
STRAIGHT
PIPE THREAD
SEALED
INTERFACE
fl
SEALED
INTERFACE
10,10
(.400)
4,45
(.175)
22,90
(.900)
PANEL
MAX
Note: In-line plug and receptacle available.
20,30
(.800)
15,90
(.600)
44,00
(1.700)
Plug, Feed-thru CLC-2
Part No.: 086-0058-000
With Silicone Grommet Seal
Part No.: 086-0058-001
With Silicone Grommet Seal
Part No.: 086-0058-002
With Fluorosilicone Seal
32,26
(1.270)
23,00
(.900)
16,60
(.650)
13,20
(.520)
A
4,45
(.175)
B
19,30
(.760)
Right Angle CLC and CLC Y-Splice, please contact Product Management.
Dimensions shown in mm
Specifications and dimensions subject to change
12
www.ittcannon.com
Snap/Clip-Lock Environmentally Sealed - Circular
Plug, Snap-thru SLC-15
Part Number: 086-0060-000
Receptacle, Snap-thru SLC-15
Part Number: 086-0059-000
Consult factory for alternate layouts.
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
13
Cannon SLC/SLC-T/CLC
Cannon SLC/SLC-T/CLC
Snap/Clip-Lock Environmentally Sealed - Circular
Contacts, Stamped, 5 and 13 Amp
Socket (use in plugs)
Description
5A
13 A
Hooded Socket
Socket Part Number
110238-1016 (030-2480-007)
Hooded Socket
Pin (use in receptacles)
Reeled
Pin Part Number
110238-0446 (030-2464-007)
110238-2004 (030-2464-003)
Socket Part Number
110238-0488 (030-2480-000)
110238-2003 (030-2480-003)
Number of Contacts
4,500
4,000
Accessories
Sealing Plugs
Connector Clip
Material: Thermoplastic, Color: Natural
Part Number: 225-0093-000
+125°C Rating
Material: Thermoplastic, Color: Natural
Part Number: 225-0093-000
+125°C Rating
Mounting Hardware for use on In-line Receptacle
(Cable-to-Cable) (Type R)
Fits Ø6,35 (.250) hole x 0,51 (.020) thick panel.
Dimensions shown in mm
Specifications and dimensions subject to change
14
www.ittcannon.com
Snap/Clip-Lock Environmentally Sealed - Circular
Cannon SLC/SLC-T/CLC
Extraction Tool
Contact Extraction Tool
Part Number: 274-7068-001
Tip Part Number: 323-9519-000
A Standard CET - SLE/SLC is available for extraction of the
individual crimp contacts. Insertion tool is not required.
Insertion / Extraction Instructions for Crimp Contacts
Insertion Tool
No insertion tool is required. The
contact is easily snapped in
from the rear of the connector
manually.
1. Move to the rear of the
connector so that the contact
cavities can be identified.
2. Insert a crimp terminated
assembly into a selected cavity.
3. Continue the forward movement
until and audible snap can be felt
and heard. Slight pull in the
opposite direction will confirm
complete insertion.
Extraction
1. Open the CET - SLC Extraction
tool and place it over the insulation
of the wire.
2. Using a straight motion forward,
insert the tool along the wire until it
bottoms against the connector. (Do
not use a screwing motion damage will result.)
3. While the extraction tool is in
place, simply pull the wire/contact
assembly out.
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
15
4. Remove the extraction tool.
Extraction is complete.
Snap/Clip-Lock Environmentally Sealed - Circular
Cannon SLC/SLC-T/CLC
Hand Crimp Tool Operation
Hand Crimp Tool - CCT - SLC / SLE
Part Number: 995-0002-232
The CCT-SLC/SLE hand crimp tool is designed to crimp individual SLC/SLE contacts on wire sizes 16, 18, and 20 AWG.
Each cycle is ratchet-controlled (The tool must be completely closed before it can be reopened) to assure a satisfactory
crimp each time. Over and under crimps are eliminated.
This tool is for use when the requirement is for low to moderate volume quantities, and for on-site applications where semiautomatic tools cannot be practically used.
1. Cycle the CCT - SLE / SLC hand tool to the open
position.
2. While pressing upward on the locator spring, insert
the contact with tails upward completely into the
locator.
3. When correctly positioned the contact should be
located beyond flush with the edge of the CCT - SLE
/ SLC and positioned in the concave polished split
level crimp.
4. Partially (usually the first click) Cycle the hand tool
assuring that the upward thrusting tails of the contact
has started engaging with the top jaw of the tool.
(There is a slight tendency for the contact to roll out
of vertical alignment.)
5. Insert the pre-stripped wire into the crimp area of
the contact and completely cycle the tool.
6. While pressing upward on the locator spring
withdraw the crimp termination.
Wire Stripping
7. The result will be a perfect termination.
8. Note that there are no unterminated wire strands,
and that some strand ends can be seen at the
forward edge of the crimp. Also note the insulation is
gripped by the smaller secondary crimp. Distortion is
at a minimum, both axially and laterally - no sharp
edges.
Tolerance
Low
High
5 and 13 A Contact
B
A
5,33 (.210)
2,41 (.095)
5,59 (.220)
3,30 (.130)
Dimensions shown in mm
Specifications and dimensions subject to change
16
www.ittcannon.com
Snap/Clip-Lock Environmentally Sealed - Circular
Cannon SLC/SLC-T/CLC
Lease Automatic Tooling - North America*
ABT-607 Pneumatic Crimper
The ABT-607 is a pneumatic powered and controlled
machine. It is designed for customers with moderate
volume. This machine is designed to semiautomatically crimp stamped and formed contacts
onto pre-stripped stranded or single conductor
electrical wire. This machine will accommodate size
34 thru 12 AWG wire and is actuated by the use of a
foot pedal.
Machine Crimp Rate:
800 per hour
The ABT-500 Universal Cannon Crimp Die, is a
flywheel driven, electronically controlled machine that
is designed to semi-automatically crimp stamped and
formed contacts on stranded or single conductor, prestripped wire. This machine will accommodate size
34 thru 12 WG wire. The machine is actuated by the
use of a foot pedal.
Machine Crimp Rate:
1300 per hour
The ABT-620 Universal Cannon Crimper/Stripper is a
pneumatic powered, microprocessor controlled
machine. It is designed to semi-automatically strip
insulation from stranded or single conductor electrical
wire and attach a stamped and formed contact by
crimping. The machine will accommodate 34 thru 12
AWG wire. Primary application of the machine is the
termination of jacketed cable where the individual
leads cannot be stripped by fully automated
equipment. The ABT-620 UCCS operates
automatically upon insertion of a wire or it can be
switched over to foot pedal operation if desired.
Machine Crimp Rate:
1200+ per hour
Power Requirements:
Pneumatic = 100 psi, 2 cu. ft. per min.
ABT-500 UCCD
Power Requirements:
Electrical = 115VAC, 60Hz, 20A
ABT-620 UCCS
* For other geographical regions, contact Cannon for details.
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
17
Power Requirements:
Electrical = 115VAC, 60Hz, 20A
Pneumatic = 80 psi, 3 cu. ft. per min.
Cannon SLC/SLC-T/CLC
Snap/Clip-Lock Environmentally Sealed - Circular
Crimp Pot Cross Section
D
CRIMP
WIDTH
C
CRIMP
HEIGHT
Crimp Height and Width
CRIMP POT
CROSS SECTION
The wire crimp heights listed are only
reference and valid for the
correspondingly listed wire size, wire
plating and wire stranding.
The wire crimp tensile values must be
used to assure the performance of
crimped contacts.
For wire crimp information not listed in
this table, please contact Cannon.
Crimp Tensile Strength
Wire Gauge (AWG)
18
D Ref.
C*
D Ref.
C*
Signal (5A)
.064*
.082
.056*
.080
Power (13A)
.066*
.082
.062*
.080
* Hand Tools are ± .002 and machines are ± .001
20
16
C*
.054*
.058*
D Ref.
.080
.080
Insulation Height and Width
Wire Gauge (AWG)
18
Width
Height
Height
Max
Max**
Max
Signal (5A)
.110
.115**
.105
Power (13A)
.110
.115**
.105
** Measurements are taken without crimping wire insulation.
20
16
Width
Max**
.110**
.110**
Height
Max
.105
.105
Width
Max**
.110**
.110**
Wire Trim Dimension
(.220 - .210)
(.130 - .095)
16
35 lbs.
Wire Size (AWG)
Tensile Min (lbs)
18
25 lbs.
20
20lbs.
Dimensions shown in mm
Specifications and dimensions subject to change
18
www.ittcannon.com
Cannon SLC/SLC-T/CLC
Snap/Clip-Lock Environmentally Sealed - Circular
Test Parameters
SLC Products are designed to meet Cannon specifications CS-206, CS-210, and CS-216. Items of most general interest to users are designers are listed below.
Test
Description
Reference
Paragraph
Requirements
Environmental
Sealing
3.2.3.5
3.2.3.6
3.2.3.7
3.2.3.8
3.2.3.9
3.2.3.2
Sand and Dust MIL-STD-202 Method 110 Test Condition A
5% salt spray 96 hours
10 cycles of 24 hours, 90-98% humidity
Steam Cleaning/Pressure Wash 95°C, 375 Cycles 750 PSIG
Solvent Resistance/Immersion (see 3.2.3.9)
Thermal Shock 100 Cycles -40°C to +150°C ± 3°C
Contact Crimp
Tensile Strength
3.2.2.1
The minimum tensile load required to separate the wire from the contact, either by pulling the wire out of the crimp joint or by
breaking the wire within the crimp joint shall not be less than the applicable limits as specified. Wire breakage or contact damage
not due to crimping at less than tensile loads shall not constitute a failure.
Wire Size AWG
Crimp Tensile Strength, Pounds Minimum
16
35
18
25
20
20
Insulation
Resistance
3.2.1.1
Mated and wired connectors shall exhibit an insulation resistance greater than 100 megohms between all contacts. This limit
shall apply after exposure to each environment including salt solution immersion. Tests shall be performed at 100 VDC ± 10%.
Dielectric
Withstanding
Voltage
Low Level
Contact
Resistance
Mechanical
Shock
3.2.1.2
Wired and mated connectors shall show no evidence of breakdown between adjacent contacts when tested at 1000 VDC ± 5%.
Connectors shall meet this requirement after exposure to each environment. Current leakage shall be less than 1.0 milliamp.
3.2.1.4
The low level contact resistance of mated contacts shall be less than 10 milliohms when measured across the contacts and
crimp joints. The test current shall be a maximum of 100 milliamps with an open circuit test voltage of 20 millivolts maximum.
3.2.3.3
Connectors shall be subjected to three shocks in each direction applied along the three mutually perpendicular axes of the
connector test specimen for a total of 12 shocks. Each shock shall consist of a terminal peak sawtooth pulse with a peak value
of 100 g's and a duration of 6 milliseconds.
Vibration
3.2.3.4
Connectors shall be subjected to random vibration in accordance with MIL-STD-1344, Method 2005.1, test condition VI for 20
hours along each of the following three axes:
Direction
Grms
Radial axis of connector (Y)
10.2
Longitudinal axis of connector (Z)
10.2
Electrical continuity of the connectors shall be monitored during the last 20 minutes sweep in each axis with a test current of 100
milliamps or less and a test voltage less than 2VDC. Electrical discontinuities in excess of 10 microseconds shall be cause of
failure.
Durability
3.2.2.6
Connectors shall be subjected to 25 cycles of mating and unmating at room temperature. Following this test there shall be no
evidence of damage to the contacts, contact plating, connector housing or seals which may prove detrimental to reliable
performance of the connector.
Contact
3.2.2.2
Contacts shall not be displaced greater than 0.030 inches from the connector body when a force of 10 pounds is applied. When
this test follows maintenance again the same contacts shall be tested.
Maintenance
Aging
3.2.2.3
Consist of subjecting each wired receptacle to 5 cycles of removal and reinsertion of 20% of the contacts or a minimum of 5 per
connector with approved tooling.
Mating and
Separating
Force
Solvent
Resistance
Immersion
3.2.2.4
The maximum force required to mate the plug and receptacle shall be 10 pounds. The maximum force required to separate the
plug and receptacle shall be 5 pounds. The rate of travel shall be one inch per minute.
3.2.2.9
Connectors shall be subjected to the following fluids at the temperature and length of time specified. Following the fluid
dip or immersion, the connectors shall be immersed to a depth of 2 to 12 inches in a 5% salt-water solution for 24
hours at room temperature. At the completion of the salt-water immersion test, while still immersed, the connectors
shall meet the insulation resistance requirement specified herein.
Fluid
Method
Temperature
No. 2 Diesel Fluid
Immersion (2)
140°F
Methyl Alcohol
Dip (1)
Room Temperature
Antifreeze
- Prestone
Immersion (2)
180°F
- 50% Water/50%
Immersion (2)
180°F
Ethylene Glycol
Degreaser
- Gunk
Dip (1)
Room Temperature
- Mineral Spirits
Dip (1)
Room Temperature
Paint (Oil Base)
Immersion (2)
Room Temperature
Lubricating Oil
Immersion (2)
200°F
(SAE 10 W40)
Dip (1)
Room Temperature
Brake Fluid
(Delco Supreme)
Room Temperature
Dip (1)
Transmission Fluid
fully submerged and pressurized
@ 7 psi. (Dextron)
(1) Dip: Connectors shall withstand a one second dip and a three minute air dry for a total of 80 cycles.
(2) Immersion: Connectors shall withstand immersion for one hour.
Temperature
Life
3.2.3.1
Connectors shall be subjected to a temperature of 150°C ± 3°C for a period of 1000 hours. At the end of the temperature soak
period and after removal from the chamber, the connectors shall meet the insulation resistance and dielectric withstanding
voltage requirements specified herein. Connectors shall be operated at rated current throughout the duration of the temperature
life test. Upon removal from the chamber at the conclusion of the test, the connectors shall show no visual signs of damage,
which may be detrimental to the performance of the connector.
Thermal Cycling
3.2.3.2
Connectors shall be subjected to 100 thermal cycles from -40°C to +150°C. One cycle shall consist of the transitions from room
temperature to -40°C to +150°C, and from 150°C to room temperature. One cycle shall be accomplished in a three-hour period
with a minimum stabilization period of 15 minutes at each temperature extreme. The chamber temperature transition rate shall
be a minimum of 1.30°C per minute and a maximum of 6.00°C per minute.
Specifications and dimensions subject to change
www.ittcannon.com
19
Cannon SLE
Snap-Lock Environmentally Sealed - Rectangular
Engineering Quick Reference Selection Guide
Part No. Description
19 Position
28 Position
Contact Arrangement
Plug, Straight PCB
19 Position
28 Position
No. of Contacts
For PCB Layout, see page 24.
SLEB19P4S SLEB19P4D
SLEB19P4L SLEB19P4SG
SLEB19P4R SLEB19P4UG
SLEB19P4U SLEB19P4DG
SLEB19S2SF SLEB19S2R
SLEB19S2S SLEB19S2U
SLEB19S2L SLEB19S2D
19
SLEB19N3P SLEB19N3PN
SLEB19N3PM SLEB19N3
130415-0000 130415-0004
130415-0001 130415-0005
130415-0002
SLEB19T3P SLEB19T3
SLEB19T3PM SLEB19T3H
SLEB19T3PN
SLEC28P4S
SLEC28P4L
SLEC28P4R
SLEC28P4U
SLEC28P4D
SLEC28P4SG
SLEC28P4UG
SLEC28P4DG
SLEC28S2SF SLEC28S2R
SLEC28S2S SLEC28S2U
SLEC28S2L SLEC28S2D
28
SLEC28N3P SLEC28N3PN
SLEC28N3PM SLEC28N3
SLEC28T3P SLEC28T3PE
SLEC28T3PM SLEC28T3
SLEC28T3PN
130415-0000 130415-0004
130415-0001 130415-0005
130415-0002
SLEB130411 SLEB19S12
SLEB130411 SLEB19S14
19
SLEC130415 SLEC28S12
SLEC130414 SLEC28S14
28
How to Order
SLE
B
19
P
4
S
G
**
Series Prefix
Size
Number of Contacts
Contact Termination
Connector Type
Connector Termination
Mechanical Modifier
Material/Finish Modifier
Dimensions shown in mm
Specifications and dimensions subject to change
20
www.ittcannon.com
Cannon SLE
Snap-Lock Environmentally Sealed - Rectangular
Engineering Quick Reference Selection Guide
19 Position
Plug, 90° PCB
28 Position
Plug, In-line
19 Position
28 Position
Receptacle, In-line
19 Position
28 Position
For PCB Layout, see page 25
130408-0000
130408-0001
130408-0002
130408-0003
130408-0004
130408-0010
130408-0011
130408-0012
130413-0000 130413-0003
130413-0001 130413-0004
130413-0002 130413-0005
130414-0000 130414-0002
130414-0001 130414-0004
130412-0000 130412-0004
130412-0001 130412-0010
130412-0002 130412-0011
130412-0003 130412-0012
130413-0000 130413-0003
130413-0001 130413-0004
130413-0002 130413-0005
130414-0000 130414-0002
130414-0001 130414-0004
Note: For configuration contact Cannon.
Note: For configuration contact Cannon.
Series Prefix
SLE - SLE-Snap Lock Environmental
Size
B-19 Cavity Housing
C-28 Cavity Housing
Number of Contacts
19 or 28
Contact Termination
T - Tuning Fork Straight [Plug with 3,05 (.120)
min. PCB tails]
N - Tuning Fork 90° [Plug with 2,54 (.100) min.
PCB tails]
P - Crimp Pin (Receptacle)
S - Crimp Socket (Plug)
P1 - Crimp Pin Power (Receptacle)
S1 - Crimp Socket Power (Pin)
Connector Type
2 - Plug, In-line (Cable-to-Cable)
3 - Plug, PCB
4 - Receptacle, In-line (Cable-to-Cable)
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
21
Connector Termination
S - Straight (Endbell)
L - 90° Left (Endbell)
R - 90° Right (Endbell)
U - 90° Up (Endbell)
D - 90° Down (Endbell)
P - Potted (PCB Only)
Mechanical Modifier
F - With Flange Mount (Plug only)
G - Screwlock Applications (Receptacle only)
M - Metric Threaded Inserts
N - Threaded Inserts #6-32
E - Threaded Inserts #6-32
Cannon SLE
Snap-Lock Environmentally Sealed - Rectangular
The Snap Lock Environmental Series is environmentally-sealed
connector created for printed circuit board, blackbox, cable-to-cable,
or bulkhead applications.
When your under-the-hood requirements call for tough performance,
the SLE "snaps" into a tightly sealed connection that can withstand
heat, shock and vibration. The connector is designed to preserve the
integrity of the solid state package, while protecting against
contaminants - even when unmated.
Polarization, scoop-proofing and hand insertion of contacts are part
of the package. Gold, tin/lead-plated stamped contacts add
durability. A rugged, thermoplastic receptacle body maximizes
performance by withstanding temperature variances from -40°C to
+125°C.
The SLE series is available in both 19 and 28 contact cavity
configurations. It can also be adapted to robotic assembly. Should
your requirement demand higher density configurations, consult
Customer Service.
Product Feature and Benefits
·
·
·
·
·
·
Superior environmental sealing
-40°C to +125°C continuous operation at rated
current
Available in two sizes, 19 and 28 contacts
Crimp stamped gold, tin/lead plated contacts
Hand insertable/removable contacts
Current rating 5 A and 13 A versions
·
·
·
·
·
·
Low millivolt drop
Small footprint on P.C. board and low profile
5-way alternate polarization
Integral mold latch. Adaptable to robotic
assembly.
Multi-direction, easily assembled endbells
Optional secondary bail latch
·
·
·
·
·
Latch with tactile and audible feedback
Low installed cost
Meets both signal and power requirements
Versatile cable strain relief, up, down, straight, left
ad right, flange/bulkhead
Connector mating assurance
Performance Specifications
Contact Resistance
Insulation Resistance
Current Rating
Dielectric Withstanding Voltage
Applicable Cannon Specification
Operating Temperature
Crimp Contacts
Wire Size
Wire Insulations Sealing Range
Polarization
Contact Insertion
Contact Extraction
Contact Retention
Wire Strip Length
10 mΩ maximum
100 MΩ minimum
5 A signal continuous at 125°C all contacts
13 A power continuous at 125°C all contacts
1000 Vrms AC at sea level
CS-189
-40°C to +125°C
Semi-automatic or hand crimpable
20-16 AWG
2,41 (.095) to 3,30 (.130) dia.
'D' shaped interface with five alternate positions.
No tool required. Suitable for automation.
Rear removable
25 lbs. Minimum per contact
5,59 (.220) to 5,33 (.210)
Materials and Finishes
Connector Housing
Contacts
Finish
Environmental Seal
High temperature thermoplastic
Copper alloy
Engaging area: Gold over nickel
Crimp/P.C. tail area: Tin/lead over nickel
High temperature silicone elastomer
Dimensions shown in mm
Specifications and dimensions subject to change
22
www.ittcannon.com
Cannon SLE
Snap-Lock Environmentally Sealed - Rectangular
Contact Cavity Arrangement
Face View - Engaging Face of Plug
Size B
19 Contacts
Size C
28 Contacts
Power Version*
Power Version*
*Contact Cannon
Polarization
Normal
W
X
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
23
Y
Z
Cannon SLE
Snap-Lock Environmentally Sealed - Rectangular
Endbells
Connectors are supplied with endbell assemblies.
Part number by Shell Size
SLEB
SLEC
B Max.
26,16 (1.030)
26,16 (1.030)
F Max.
50,80 (2.000)
66,04 (2.600)
Cable Entry I.D.
14,73 (.580)
19,81 (.780)
Plug, In-line (Cable-to-Cable)
With Flange Endbell
(Plug Only)
Note: Plugs are supplied with endbell assemblies.
Shell
Size
SLEB
SLEB
SLEB
SLEB
SLEB
SLEB
SLEC
SLEC
SLEC
SLEC
SLEC
SLEC
Number of
Contacts
19
19
19
19
19
19
28
28
28
28
28
28
Part Number*
Nomenclature
130409-0000*
130409-0001*
130409-0002*
130409-0003*
130409-0004*
130409-0005*
130413-0000
130413-0001
130413-0002
130413-0003
130413-0004
130413-0005
SLEB19S2SF
SLEB19S2S
SLEB19S2L
SLEB19S2R
SLEB19S2U
SLEB19S2D
SLEC28S2SF
SLEC28S2S
SLEC28S2L
SLEC28S2R
SLEC28S2U
SLEC28S2D
A Max.
71,88 (2.830)
71,88 (2.830)
71,88 (2.830)
71,88 (2.830)
71,88 (2.830)
71,88 (2.830)
87,11 (3.430)
87,11 (3.430)
87,11 (3.430)
87,11 (3.430)
87,11 (3.430)
87,11 (3.430)
C Max.
47,50
47,50
47,50
47,50
47,50
47,50
62,74
62,74
62,74
62,74
62,74
62,74
(1.870)
(1.870)
(1.870)
(1.870)
(1.870)
(1.870)
(2.470)
(2.470)
(2.470)
(2.470)
(2.470)
(2.470)
D
±0,38 (.015)
59,05
59,05
59,05
59,05
59,05
59,05
74,29
74,29
74,29
74,29
74,29
74,29
(2.325)
(2.325)
(2.325)
(2.325)
(2.325)
(2.325)
(2.925)
(2.925)
(2.925)
(2.925)
(2.925)
(2.925)
*Select polarization, see page 25.
Dimensions shown in mm
Specifications and dimensions subject to change
24
www.ittcannon.com
Cannon SLE
Snap-Lock Environmentally Sealed - Rectangular
Receptacle, In-line (Cable-to-Cable)
90° Left and Right
Straight
Screwlock
Note: Receptacles are supplied with endbell assemblies.
Shell
Size
SLEB
SLEB
SLEB
SLEB
SLEB
SLEB
SLEB
SLEB
SLEC
SLEC
SLEC
SLEC
SLEC
SLEC
SLEC
SLEC
Number of
Contacts
Part Number*
19
19
19
19
19
19
19
19
28
28
28
28
28
28
28
28
130408-0000*
130408-0001*
130408-0002*
130408-0003*
130408-0004*
130408-0010*
130408-0011*
130408-0012*
130412-0000
130412-0001
130412-0002
130412-0003
130412-0004
130412-0010
130412-0011
130412-0012
E
Nomenclature
SLEB19P4S
SLEB19P4L
SLEB19P4R
SLEB19P4U
SLEB19P4D
SLEB19P4SG
SLEB19P4UG
SLEB19P4DG
SLEC28P4S
SLEC28P4L
SLEC28P4R
SLEC28P4U
SLEC28P4D
SLEC28P4SG
SLEC28P4UG
SLEC28P4DG
A Max.
59,44
59,44
59,44
59,44
59,44
59,44
59,44
59,44
76,45
76,45
76,45
76,45
76,45
76,45
76,45
76,45
(2.340)
(2.340)
(2.340)
(2.340)
(2.340)
(2.340)
(2.340)
(2.340)
(3.010)
(3.010)
(3.010)
(3.010)
(3.010)
(3.010)
(3.010)
(3.010)
*Select polarization, see page 23.
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
25
C Max.
44,07
44,07
44,07
44,07
44,07
44,07
44,07
44,07
59,31
59,31
59,31
59,31
59,31
59,31
59,31
59,31
(1.735)
(1.735)
(1.735)
(1.735)
(1.735)
(1.735)
(1.735)
(1.735)
(2.335)
(2.335)
(2.335)
(2.335)
(2.335)
(2.335)
(2.335)
(2.335)
D Max.
50,58
50,58
50,58
50,58
50,58
50,58
50,58
50,58
66,04
66,04
66,04
66,04
66,04
66,04
66,04
66,04
±0,38 (.015)
(2.000)
(2.000)
(2.000)
(2.000)
(2.000)
(2.000)
(2.000)
(2.000)
(2.600)
(2.600)
(2.600)
(2.600)
(2.600)
(2.600)
(2.600)
(2.600)
F Max.
55,87 (2.200)
55,87 (2.200)
55,87 (2.200)
55,87 (2.200)
55,87 (2.200)
55,87 (2.200)
55,87 (2.200)
55,87 (2.200)
71,11 (2.800)
71,11 (2.800)
71,11 (2.800)
71,11 (2.800)
71,11 (2.800)
71,11 (2.800)
71,11 (2.800)
71,11 (2.800)
64,25
64,25
64,25
64,25
64,25
64,25
64,25
64,25
79,49
79,49
79,49
79,49
79,49
79,49
79,49
79,49
(2.530)
(2.530)
(2.530)
(2.530)
(2.530)
(2.530)
(2.530)
(2.530)
(3.130)
(3.130)
(3.130)
(3.130)
(3.130)
(3.130)
(3.130)
(3.130)
Cannon SLE
Snap-Lock Environmentally Sealed - Rectangular
Plug, PCB, Straight
2X
4,80-4,69
(.189-.185)
A
B
24,13-23,72
(.950-.930)
CL
18,42-18,03
(.725-.710)
D
Panel Cutout
Shell
Size
SLEB
SLEB
SLEB
SLEB
SLEB
SLEC
SLEC
SLEC
SLEC
SLEC
Number of
Contacts
Part Number*
Nomenclature
130411-0000*
130411-0001*
130411-0002*
130411-0004*
130411-0005*
130415-0000
130415-0001
130415-0002
130415-0004
130415-0005
SLEB19T3P
SLEB19T3PM
SLEB19T3PN
SLEB19T3E
SLEB19T3
SLEC28T3P
SLEC28T3PM
SLEC28T3PN
SLEC28T3PE
SLEC28T3
19
19
19
19
19
28
28
28
28
28
A Max.
63,50
63,50
63,50
63,50
63,50
78,94
78,94
78,94
78,94
78,94
(2.500)
(2.500)
(2.500)
(2.500)
(2.500)
(3.108)
(3.108)
(3.108)
(3.108)
(3.108)
B Max.
74,94
74,94
74,94
74,94
74,94
54,61
54,61
54,61
54,61
54,61
D Max.
(3.100)
(3.100)
(3.100)
(3.100)
(3.100)
(2.150)
(2.150)
(2.150)
(2.150)
(2.150)
56,13
56,13
56,13
56,13
56,13
71,37
71,37
71,37
71,37
71,37
(2.210)
(2.210)
(2.210)
(2.210)
(2.210)
(2.810)
(2.810)
(2.810)
(2.810)
(2.810)
E Max.
47,62
47,62
47,62
47,62
47,62
62,86
62,86
62,86
62,86
62,86
(1.875)
(1.875)
(1.875)
(1.875)
(1.875)
(2.475)
(2.475)
(2.475)
(2.475)
(2.475)
*Select polarization, see page 23.
Recommended PCB Layout, Straight
SLE B19
(19 contacts)
SLE C28
(28 contacts)
Dimensions shown in mm
Specifications and dimensions subject to change
26
www.ittcannon.com
Cannon SLE
Snap-Lock Environmentally Sealed - Rectangular
Plug, PCB, 90˚
Panel Cutout
Shell
Size
SLEB
SLEB
SLEB
SLEB
SLEC
SLEC
SLEC
SLEC
Number of
Contacts
Part Number*
Nomenclature
130410-0000*
130410-0001*
130410-0002*
130410-0004*
130414-0000
130414-0001
130414-0002
130414-0004
SLEB19N3P
SLEB19N3PM
SLEB19N3PN
SLEB19N3
SLEC28N3P
SLEC28N3PM
SLEC28N3PN
SLEC28N3
19
19
19
19
28
28
28
28
A Max.
63,50
63,50
63,50
63,50
78,94
78,94
78,94
78,94
(2.500)
(2.500)
(2.500)
(2.500)
(3.108)
(3.108)
(3.108)
(3.108)
B Max.
74,94
74,94
74,94
74,94
54,61
54,61
54,61
54,61
C Max.
(3.100)
(3.100)
(3.100)
(3.100)
(2.150)
(2.150)
(2.150)
(2.150)
35,81
35,81
35,81
35,81
51,05
51,05
51,05
51,05
*Select polarization, see page 23.
Recommended PCB Layout, 90˚
SLE B19
(19 contacts)
SLE C28
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
27
(28 contacts)
(1.410)
(1.410)
(1.410)
(1.410)
(2.010)
(2.010)
(2.010)
(2.010)
D Max.
56,13
56,13
56,13
56,13
71,37
71,37
71,37
71,37
(2.210)
(2.210)
(2.210)
(2.210)
(2.810)
(2.810)
(2.810)
(2.810)
E Max.
47,62
47,62
47,62
47,62
62,86
62,86
62,86
62,86
(1.875)
(1.875)
(1.875)
(1.875)
(2.475)
(2.475)
(2.475)
(2.475)
Cannon SLE
Snap-Lock Environmentally Sealed - Rectangular
Contacts, Stamped, 5 and 13 Amp
Socket (use in plugs)
Description
5A
13 A
Hooded Socket
Socket Part Number Reeled
110238-1016 (030-2480-007)
Hooded Socket
Pin (use in receptacles)
Reeled
Pin Part Number
110238-0446 (030-2464-007)
110238-2004 (030-2464-003)
Socket Part Number
110238-04888 (030-2480-000)
110238-2003 (030-2480-003)
Number of Contacts
4,500
4,000
Accessories
Sealing Plug
Female Screw Lock
Material: Thermoplastic, Color: Natural
Part Number: 225-0093-000
Order 2 per connector
Material: Steel
Finish: Zinc
Part Number: 265-0061-000
Latch Clip Retainer
Bail Latch For Redundant Latch Applications
SLEB
029-0281-000
SLEC
029-0281-001
Test Methods
Insulation Resistance
Dielectric Withstanding Voltage
Contact Resistance
Low Level Contact Resistance
Crimp Tensile Strength
Contact Retention
Mating Separating Force
Durability
Temperature Life
Mechanical Shock
Maintenance Aging
Vibration
Sand and Dust
Salt and Spray
Humidity
Steam Cleaning/Pressure Wash
MIL-STD-1344
MIL-STD-1344
MIL-STD-1344
MIL-STD-1344
MIL-STD-1344
MIL-STD-1344
MIL-STD-1344
MIL-STD-1344
MIL-STD-202
MIL-STD-202
MIL-STD-1344
MIL-STD-1344
MIL-STD-202
MIL-STD-202
MIL-STD-202
SAE
Method 3003.1
Method 3001.1
Method 3004.1
Method 3002.1
Method 2003.1
Method 2007.1
Method 2013.1
Method 2016
Method 108 Condition D
Method 213 Condition I
Method 2002.1
Method 2005.1 Condition VI 20 Hours/Axis
Method 110
Method 101 Condition A
Method 106
Proposed
Dimensions shown in mm
Specifications and dimensions subject to change
28
www.ittcannon.com
Snap-Lock Environmentally Sealed - Rectangular
Cannon SLE
Extraction Tool
Contact Extraction Tool
Part Number: 274-7068-001
Tip Part Number: 323-9519-000
· A Standard CET - SLE/SLC is available for
extraction of the individual crimp contacts. Insertion
tool is not required.
Insertion/Extraction Instructions for Crimp Contacts
Insertion Tool
No insertion tool is required. The
contact is easily snapped in
from the rear of the connector
manually.
1. Move to the rear of the
connector so that the contact
cavities can be identified.
2. Insert a crimp terminated
assembly into a selected cavity.
3. Continue the forward movement
until and audible snap can be felt
and heard. Slight pull in the
opposite direction will confirm
complete insertion.
Extraction
1. Open the CET - SLE Extraction
tool and place it over the insulation
of the wire.
2. Using a straight motion forward,
insert the tool along the wire until it
bottoms against the connector. (Do
not use a screwing motion damage will result.)
3. While the extraction tool is in
place, simply pull the wire/contact
assembly out.
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
29
4. Remove the extraction tool.
Extraction is complete.
Cannon SLE
Snap-Lock Environmentally Sealed - Rectangular
Hand Crimp Tool Operation
Hand Crimp Tool - CCT - SLC / SLE
Part Number: 995-0002-232
The CCT-SLC/SLE hand crimp tool is designed to crimp individual SLC/SLE contacts on wire sizes 16, 18, and 20 AWG.
Each cycle is ratchet-controlled (The tool must be completely closed before it can be reopened) to assure a satisfactory
crimp each time. Over and under crimps are eliminated.
This tool is for use when the requirement is for low to moderate volume quantities, and for on-site applications where semiautomatic tools cannot be practically used.
1. Cycle the CCT - SLE / SLC hand tool to the open
position.
2. While pressing upward on the locator spring, insert
the contact with tails upward completely into the
locator.
3. When correctly positioned the contact should be
located beyond flush with the edge of the CCT - SLE
/ SLC and positioned in the concave polished split
level crimp.
4. Partially (usually the first click) Cycle the hand tool
assuring that the upward thrusting tails of the contact
has started engaging with the top jaw of the tool.
(There is a slight tendency for the contact to roll out
of vertical alignment.)
5. Insert the pre-stripped wire into the crimp area of
the contact and completely cycle the tool.
6. While pressing upward on the locator spring
withdraw the crimp termination.
Wire Stripping
7. The result will be a perfect termination.
8. Note that there are no unterminated wire strands,
and that some strand ends can be seen at the
forward edge of the crimp. Also note the insulation is
gripped by the smaller secondary crimp. Distortion is
at a minimum, both axially and laterally - no sharp
edges.
Tolerance
Low
High
5 and 13 A Contact
A
B
2,41 (.095)
5,33 (.210)
3,30 (.130)
5,59 (.220)
Dimensions shown in mm
Specifications and dimensions subject to change
30
www.ittcannon.com
Cannon SLE
Snap-Lock Environmentally Sealed - Rectangular
Lease Automatic Tooling - North America*
ABT-607 Pneumatic Crimper
The ABT-607 is a pneumatic powered and controlled
machine. It is designed for customers with moderate
volume. This machine is designed to semiautomatically crimp stamped and formed contacts
onto pre-stripped stranded or single conductor
electrical wire. This machine will accommodate size
34 thru 12 AWG wire and is actuated by the use of a
foot pedal.
Machine Crimp Rate:
800 per hour
The ABT-500 Universal Cannon Crimp Die, is a
flywheel driven, electronically controlled machine that
is designed to semi-automatically crimp stamped and
formed contacts on stranded or single conductor, prestripped wire. This machine will accommodate size
34 thru 12 WG wire. The machine is actuated by the
use of a foot pedal.
Machine Crimp Rate:
1300 per hour
The ABT-620 Universal Cannon Crimper/Stripper is a
pneumatic powered, microprocessor controlled
machine. It is designed to semi-automatically strip
insulation from stranded or single conductor electrical
wire and attach a stamped and formed contact by
crimping. The machine will accommodate 34 thru 12
AWG wire. Primary application of the machine is the
termination of jacketed cable where the individual
leads cannot be stripped by fully automated
equipment. The ABT-620 UCCS operates
automatically upon insertion of a wire or it can be
switched over to foot pedal operation if desired.
Machine Crimp Rate:
1200+ per hour
Power Requirements:
Pneumatic = 100 psi, 2 cu. ft. per min.
ABT-500 UCCD
Power Requirements:
Electrical = 115VAC, 60Hz, 20A
ABT-620 UCCS
* For other geographical regions, contact Cannon for details.
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
31
Power Requirements:
Electrical = 115VAC, 60Hz, 20A
Pneumatic = 80 psi, 3 cu. ft. per min.
Cannon SLE
Snap-Lock Environmentally Sealed - Rectangular
Crimp Pot Cross Section
D
CRIMP
WIDTH
C
CRIMP
HEIGHT
Crimp Height and Width
CRIMP POT
CROSS SECTION
The wire crimp heights listed are only
reference and valid for the
correspondingly listed wire size, wire
plating and wire stranding.
The wire crimp tensile values must be
used to assure the performance of
crimped contacts.
For wire crimp information not listed in
this table, please contact Cannon.
Crimp Tensile Strength
Wire Gauge (AWG)
18
D Ref.
C*
D Ref.
C*
.064*
.082
.056*
.080
Signal (5A)
Power (13A)
.066*
.082
.062*
.080
* Hand Tools are ± .002 and machines are ± .001
20
16
C*
.054*
.058*
D Ref.
.080
.080
Insulation Height and Width
Wire Gauge (AWG)
18
Width
Height
Height
Max**
Max
Max
Signal (5A)
.110
.115**
.105
Power (13A)
.110
.115**
.105
** Measurements are taken without crimping wire insulation.
16
20
Width
Max**
.110**
.110**
Height
Max
.105
.105
Width
Max**
.110**
.110**
Wire Trim Dimension
(.220 - .210)
(.130 - .095)
16
35 lbs.
Wire Size (AWG)
Tensile Min (lbs)
18
25 lbs.
20
20lbs.
Dimensions shown in mm
Specifications and dimensions subject to change
32
www.ittcannon.com
Snap-Lock Environmentally Sealed - Rectangular
Cannon SLE
Test Parameters
SLC Products are designed to meet Cannon specifications CS-206, CS-210, and CS-216. Items of most general interest to users are designers are listed below.
Test
Description
Reference
Paragraph
Requirements
Environmental
Sealing
3.2.3.5
3.2.3.6
3.2.3.7
3.2.3.8
3.2.3.9
3.2.3.10
Sand and Dust MIL-STD-202 Method 110 Test Condition A
5% salt spray 96 hours
10 cycles of 24 hours, 90-98% humidity
Steam Cleaning/Pressure Wash 95°C, 375 Cycles 750 PSIG
Solvent Resistance/Immersion (see 3.2.3.9)
Thermal Shock 100 Cycles -40°C to +125°C ± 3°C
Contact Crimp
Tensile Strength
3.2.2.1
The minimum tensile load required to separate the wire from the contact, either by pulling the wire out of the crimp joint or by
breaking the wire within the crimp joint shall not be less than the applicable limits as specified. Wire breakage or contact damage
not due to crimping at less than tensile loads shall not constitute a failure.
Wire Size AWG
Crimp Tensile Strength, Pounds Minimum
16
35
18
25
20
20
Insulation
Resistance
Dielectric
Withstanding
Voltage
Low Level
Contact
Resistance
Mechanical
Shock
3.2.1.1
Mated and wired connectors shall exhibit an insulation resistance greater than 100 megohms between all contacts. This limit
shall apply after exposure to each environment including salt solution immersion. Tests shall be performed at 100 VDC ± 10%.
3.2.1.2
Wired and mated connectors shall show no evidence of breakdown between adjacent contacts when tested at 1000 VDC ± 5%.
Connectors shall meet this requirement after exposure to each environment. Current leakage shall be less than 1.0 milliamp.
3.2.1.4
The low level contact resistance of mated contacts shall be less than 10 milliohms when measured across the contacts and
crimp joints. The test current shall be a maximum of 100 milliamps with an open circuit test voltage of 20 millivolts maximum.
3.2.3.3
Vibration
3.2.3.4
Connectors shall be subjected to three shocks in each direction applied along the three mutually perpendicular axes of the
connector test specimen for a total of 12 shocks. Each shock shall consist of a terminal peak sawtooth pulse with a peak value
of 100 g's and a duration of 6 milliseconds.
Connectors shall be subjected to random vibration in accordance with MIL-STD-1344, Method 2005.1, test condition VI for 20
hours along each of the following three axes:
Direction
Grms
Transverse axis of connector (Y)
22.8
Longitudinal axis of connector (Z)
12.2
Mating axis
10.2
Electrical continuity of the connectors shall be monitored during the last 20 minutes sweep in each axis with a test current of 100
milliamps or less and a test voltage less than 2VDC. Electrical discontinuities in excess of 10 microseconds shall be cause of
failure.
Durability
3.2.2.5
Connectors shall be subjected to 25 cycles of mating and unmating at room temperature. Following this test there shall be no
evidence of damage to the contacts, contact plating, connector housing or seals which may prove detrimental to reliable
performance of the connector.
Contact
3.2.2.2
Contacts shall not be displaced greater than 0.030 inches from the connector body when a force of 10 pounds is applied. When
this test follows maintenance again the same contacts shall be tested.
Maintenance
Aging
3.2.2.3
Shall consist of subjecting each wired receptacle to 4 cycles of removal and reinsertion of 20% of the contacts or a minimum of 6
per connector with approved tooling.
Mating and
Separating
Force
Solvent
Resistance
Immersion
3.2.2.4
The maximum force required to mate the plug and receptacle shall be 25 pounds. The maximum force required to separate the
plug and receptacle shall be 15 pounds. The rate of travel shall be one inch per minute.
3.2.2.9
Connectors shall be subjected to the following fluids at the temperature and length of time specified. Following the fluid
dip or immersion, the connectors shall be immersed to a depth of 2 to 12 inches in a 5% salt-water solution for 24
hours at room temperature. At the completion of the salt-water immersion test, while still immersed, the connectors
shall meet the insulation resistance requirement specified herein.
Temperature
Method
Fluid
Immersion (2)
140°F
No. 2 Diesel Fluid
Room Temperature
Dip (1)
Methyl Alcohol
Antifreeze
- Prestone
Immersion (2)
180°F
- 50% Water/50%
Immersion (2)
180°F
Ethylene Glycol
Degreaser
Room Temperature
Dip (1)
- Gunk
- Mineral Spirits
Dip (1)
Room Temperature
Paint (Oil Base)
Immersion (2)
Room Temperature
Lubricating Oil
Immersion (2)
200°F
(SAE 10 W40)
Room Temperature
Dip (1)
Brake Fluid
(Delco Supreme)
Transmission Fluid
Dip (1)
Room Temperature
fully submerged and pressurized
@ 7 psi. (Dextron)
(1) Dip: Connectors shall withstand a one second dip and a three minute air dry for a total of 80 cycles.
(2) Immersion: Connectors shall withstand immersion for one hour.
Temperature
Life
3.2.3.1
Connectors shall be subjected to a temperature of 125°C ± 3°C for a period of 1000 hours. At the end of the temperature soak
period and after removal from the chamber, the connectors shall meet the insulation resistance and dielectric withstanding
voltage requirements specified herein. Connectors shall be operated at rated current throughout the duration of the temperature
life test. Upon removal from the chamber at the conclusion of the test, the connectors shall show no visual signs of damage,
which may be detrimental to the performance of the connector.
Thermal Cycling
3.2.3.2
Connectors shall be subjected to 100 thermal cycles from -40°C to +125°C. One cycle shall consist of the transitions from room
temperature to -40°C to +125°C, and from 125°C to room temperature. One cycle shall be accomplished in a three-hour period
with a minimum stabilization period of 15 minutes at each temperature extreme. The chamber temperature transition rate shall
be a minimum of 1.30°C per minute and a maximum of 6.00°C per minute.
Specifications and dimensions subject to change
www.ittcannon.com
33
Cannon APV Vector
Sealed, Light weight, In-line & Bulkhead Mount Connectors
Crimp Pot Cross Section
The Vector connector offers low cost, light weight,
environmental sealing with maximum space savings.
High terminal density enable harnessing of both
power (wire size 14-12 AWG) and signal (wire size
20-16 AWG) terminals within a single housing.
Secondary Terminal Locking
A single wedge provides secondary lock of all
terminals reducing labor associated with wedge
insertion. Assembly is fast and easy.
Positive Mating
The unique trapezoidal shape of the connector
housing assures polarization and reliability by
preventing incorrect mating or damage caused by
mismating. The dual latch assures reliable mating.
In-Line Design
An in-line design assures quick and simultaneous
connection of terminals as well as versatility through
partial loading of contacts when a full complement is
not needed.
Features and Benefits
· Lightweight connector eliminates bulky components
from your sensors, motors, and actuators
· Quick and simple assembly with hand-insertable
contacts lowers your manufacturing costs
· Interfacial and individual wire seals provide superior
sealing characteristics
· Available in signal (13 A) and power (25 A) versions
for maximum rating flexibility
Product Specifications
Contact Resistance
Insulation Resistance
Current Rating
Dielectric Withstanding Voltage
Applicable Cannon Specification
Operating Temperature
Crimp Contacts
Wire Size
Wire Insulation Sealing Range
Polarization
Contact Insertion
Contact Extraction
Contact Retention
Wire Strip Length
20mΩ maximum
100MΩl minimum (USCAR)
13 A signal continuous at 150°C all contacts, 2 position
25 A power continuous at 150°C all contacts, 5 position and 10 position only
1000 Vrms AC at sea level
CS-211
Gold Contacts: -40°C to +150°C
Tin Lead Contacts: -40°C to +105°C
Semi-automatic or hand crimpable with individual wire seals
Signal: 20 - 16 AWG
Power: 14 - 12 AWG
Signal: 1,29 (.051) to 2,80 (.110)
Power: 2,03 (.0780) to 4,21 (.166)
Trapezoidal interface
No tool required. Suitable for automation.
Rear Removable
25 lbs. Minimum per contact
Signal: 3,81 (.150) to 4,31 (.170)
Power: 4,83 (.190) to 5,33 (.210)
Materials and Finishes
Connector Housing
Environmental Seal
Contact Finish
High temperature thermoplastic
High temperature silicone elastomer
Engaging area: Tin lead over nickel or selective gold optional
Crimp area: Tin lead over nickel
Dimensions shown in mm
Specifications and dimensions subject to change
34
www.ittcannon.com
Cannon APV Vector
Sealed, Light weight, In-line & Bulkhead Mount Connectors
Plug, Vector In-Line (Cable-to-Cable)
Description
Part Number
Housing Recept., 4 pos.
Secondary Lock, Socket Wedge
Terminal, Signal
Terminal, Power
Wire Seal, Signal
Wire Seal, Power
083-1001-000
317-1803-000
031-8719-121
031-8717-140
980-0008-387
980-0008-392
Reel Number
Insul. O.D.
2,06 - 1,29 (.081 - .051)
3,60 - 2,81 (.142 - .111)
121668-0202
121688-0120
-
For additional sizes, contact Cannon.
Receptacle, Vector In-Line (Cable-to-Cable)
Description
Part Number
Housing Recept., 4 pos.
Secondary Lock, Pin Wedge
Terminal, Signal
Terminal, Power
Interfacial Seal
Wire Seal, Signal
Wire Seal, Power
083-1000-000
317-1802-000
330-8673-104
330-8672-233
273-3038-000
980-0008-388
980-0008-393
Reel Number
Insul. O.D.
121668-0122
121688-0020
-
2,080 - 2,03 (.110 - .080)
4,21 - 3,50 (.166 - .138)
Additional Part Numbers
Description
Insul. O.D.
2,06 - 1,29 (.081 - .051)
Insul. O.D.
2,42 - 2,26 (.095 - .089)
Insul. O.D.
2,80 - 2,03 (.110 - .080)
Wire Seal, Power
980-0008-389
980-0008-391
980-0008-390
Crimp Tool
Part Number: 140110-0000
Reliable, Cost effective crimp tooling is available for
termination of power and signal contacts.
Dimensions shown in mm
Specifications and dimensions subject to change
www.ittcannon.com
35
Product Safety Information
THIS NOTE MUST BE READ IN
CONJUNCTION WITH THE PRODUCT
DATA SHEET/CATALOG. FAILURE TO
OBSERVE THE ADVICE IN THIS
INFORMATION SHEET AND THE
OPERATING CONDITIONS SPECIFIED
IN THE PRODUCT DATA SHEET/
CATALOG
COULD
RESULT
IN
HAZARDOUS SITUATIONS.
1.
MATERIAL
CONTENT
AND
PHYSICAL FORM
Electrical connectors do not usually
contain hazardous materials. They
contain conducting and non-conducting
materials and can be divided into two
groups.
a) Printed circuit types and low cost audio
types which employ all plastic insulators
and casings.
b) Rugged, Fire Barrier and High
Reliability types with metal casings and
either natural rubber, synthetic rubber,
plastic or glass insulating materials.
Contact materials vary with type of
connector and also application and are
usually manufactured from either:
Copper, copper alloys, nickel, alumel,
chromel or steel. In special applications,
other alloys may be specified.
2. FIRE CHARACTERISTICS AND
ELECTRIC SHOCK HAZARD
There is no fire hazard when the
connector is correctly wired and used
within the specified parameters.
Incorrect wiring or assembly of the
connector or careless use of metal
tools or conductive fluids, or transit
damage to any of the component parts
may cause electric shock or burns.
Live circuits must not be broken by
separating mated connectors as this
may cause arcing, ionization and
burning. Heat dissipation is greater at
maximum resistance in a circuit. Hot
spots may occur when resistance is
raised locally by damage, e.g. cracked or
deformed contacts, broken strands of
wire. Local overheating may also result
from the use of the incorrect application
tools or from poor quality soldering or
slack screw terminals. Overheating may
occur if the ratings in the product Data
Sheet/Catalog are exceeded and can
cause breakdown of insulation and hence
electric shock. If heating is allowed to
continue it intensifies by further
increasing the local resistance through
loss of temper of spring contacts,
formation of oxide film on contacts and
wires and leakage currents through
carbonization of insulation and tracking
paths. Fire can then result in the
presence of combustible materials and
this may release noxious fumes.
Overheating may not be visually
apparent. Burns may result from touching
overheated components.
3. HANDLING
Care must be taken to avoid damage
to any component parts of electrical
connectors during installation and use.
Although there are normally no sharp
edges, care must be taken when handling
certain components to avoid injury to
fingers. Electrical connectors may be
damaged in transit to the customers, and
damage may result in creation of
hazards. Products should therefore be
examined prior to installation/use and
rejected if found to be damaged.
4. DISPOSAL
Incineration of certain materials may
release noxious or even toxic fumes.
5. APPLICATION
Connectors with exposed contacts should
not be selected for use on the current
supply side of an electrical circuit,
because an electric shock could result
from touching exposed contacts on an
unmated connector. Voltages in excess of
30 V ac or 42.5 V dc are potentially
hazardous and care should be taken to
ensure that such voltages cannot be
transmitted in any way to exposed metal
parts of the connector body. The
connector and wiring should be checked,
before making live, to have no damage to
metal parts or insulators, no solder blobs,
loose strands, conducting lubricants,
swarf, or any other undesired conducting
particles. Circuit resistance and continuity
check should be made to make certain
that there are no high resistance joints or
spurious conducting paths. Always use
the correct application tools as specified
in the Data Sheet/Catalog. Do not permit
untrained personnel to wire, assemble or
tamper with connectors. For operation
voltage please see appropriate national
regulations.
IMPORTANT GENERAL INFORMATION
(i) Air and creepage paths/Operating
voltage. The admissible operating
voltages depend on the individual
applications and the valid national and
other applicable safety regulations.
For this reason the air and creepage path
data are only reference values. Observe
reduction of air and creepage paths due
to PC board and/or harnessing.
(iii) Other important information
Cannon continuously endeavors to
improve their products. Therefore,
Cannon products may deviate from the
description, technical data and shape as
shown in this catalog and data sheets.
“Engineered for life” is a
trademark of ITT Industries,
other
trademarks
or
trademarks are property
respective owners. All data
change without notice.
registered
©2005. All
registered
of their
subject to
Product Warranty
ITT Cannon, a Division of ITT
Industries, Inc. manufactures the
highest quality products available in
the marketplace; however these
products are intended to be used in
accordance with the specifications in
this publication. Any use or application
that deviates from the stated operating
specifications is not recommended and
may be unsafe. No information and
data contained in this publication shall
be construed to create any liability on
the part of Cannon. Any new issue of
this publication shall automatically
invalidate and supersede any and all
previous issues. A limited warranty
applies to Cannon products. Except for
obligations assumed by Cannon under
this warranty, Cannon shall not be
liable for any loss, damage, cost of
repairs, incidental or consequential
damages of any kind, whether or not
based on express or implied warranty,
contract, negligence or strict liability
arising in connection with the design,
manufacture, sale, use or repair of the
products. Product availability, prices
and delivery dates are exclusively
subject to our respective order
confirmation form; the same applies to
orders based on development samples
delivered. This publication is not to be
construed as an offer. It is intended
merely as an invitation to make an
offer. By this publication, Cannon does
not assume responsibility or any
liability for any patent infringements or
other rights of third parties which may
result from its use. Reprinting this
publication is generally permitted,
indicating the source. However,
Cannon's prior consent must be
obtained in all cases.
(ii) Temperature
All information given are temperature
limits. The operation temperature
depends on the individual application.
Dimensions shown in mm
Specifications and dimensions subject to change
36
www.ittcannon.com
Connector Product Locations
With manufacturing facilities, sales representatives and distributors located
worldwide, please visit our website at ww.ittcannon.com for a complete listing and to
find the office nearest you.
GERMANY
Cannonstrasse 1
Weinstadt, 71384
phone: 49.7151.699.0
fax: 49.7151.699.217
HONG KONG
Unit 901 & 912, West Tower
Shun Tak Center
168-200 Connaught Road
Central
phone: 852.2732.2720
fax: 852.2732.2919
ITALY
Via Pietro Panzeri 10
Milano, 20123
phone: 39.2.58180.1
fax: 39.2.8372036
UK
Jays Close, Viables Estate
Basingstoke, RG22 4BA
phone: 44.1256.311200
fax: 44.1256.323356
USA
666 East Dyer Road
Santa Ana, CA 92705
toll free: 1.800.854.3028
phone: 1.714.557.4700
fax: 1.714.628.2142
“Engineered for life” is a registered trademark
of ITT Industries.©2005. All other trademarks
or registered trademarks are property of their
respective owners. All data subject to change
without notice.
www.ittcannon.com
SLC 05-Sept
工商网监
湘ICP备2023018690号
