120220-0162

Customer Support Locations AMERICAS 100 New Wood Road Watertown, CT 06796 Tel: 860.945.0206 Toll Free: 800.683.7666 Fax: 860.645.0303 ASIA Unit 901 & 912, West Tower, Shun Tak Center 168-200 Connaught Road Central, Hong Kong Tel: +852.2732.2720 Fax: +852.2732.2919 EUROPE Jays Close, Viables Estate Basingstoke, Hants, RG22 4BA Tel: +44.1256.311200 Fax: +44.1256.323356 www.ittcannon.com ©2007 ITT Corporation. “Engineered for life” and “Cannon” are registered trademarks of ITT Corporation. Specification and other data are based on information available at the time of printing, and are subject to change without notice. UC-apr-07 Universal Contact Universal Contact is an independent SMT contact which provides an electrical connection between a device and a PCB. The contact is manufactured as a single piece stamped product, incorporating pre-load and anti-lift features. The Universal Contact has been designed to replace traditional interfaces where the contact is custom designed into the component. It can be used to connect a number of device components in any direction and configuration using the same interface. Additional Advantages of using Universal Contacts • • • Qualification time reduction - same contact for many components Allows standard interface across applications and platforms Freedom to position at an angle - not fixed by mating component 3.41 ± 0.15 3.48 ±0.15 1.80 2.05 0.80 0.40 Min At Max compression 1.30 ±0.10 1.00 ±0.10 0.55 0.84 0.40 Min At Max compression 0.90 ± 0.10 0.55 0.77 ±0.10 • • • • • • Range of heights available: - 1.3mm contact with the minimum pitch of 1.35mm - 1.8mm contact with the minimum pitch of 1.25mm - 2.5mm contact the minimum pitch is 1.35mm - 3.5 & 4.0mm minimum pitch is 1.45mm Solderwell that prevents solder wicking up the contact “Side wings” protect the active parts of the contact which prevent contact from overstressing and potential damage Domed contact point allows good hertz stress and low contact resistance The X-Y-Z movement allows robust connection between the contact and component assembly during shock and vibration Compliant with WEEE and RoHS directives. 2.35 Soldering area 1.00 ± 0.10 Features & Benefits of the Design Handset • Solderless component interconnect • I/O connector / Board to board interconnect • Battery contact / Antenna contact • Grounding contact / SIM contact Laptops & Computers • Memory Stick Home Electronic Devices / White Goods • Smoke detectors / Security alarm systems • Home appliances Automotive - Keyfob Medical - CT scan equipment Industrial - Circuit breaker for GPS beckon 1.80±0.10 Applications 2.35 Soldering area 1.3mm 120220-0210 packaging: 9,500 per reel 4.87 ± 0.15 1.8mm 120220-0202 packaging: 6,800 per reel 5.00 2.80 2.87 1.19 0.74 Min At Max compression 1.02 ± 0.10 0.63 0.47 Min At Max compression 1.66 1.10 ± 0.10 0.70 Beryllium Copper Selective Au in contact area 1 µm min over Au stripe, 0.05 - 0.1 µm over Ni 1.0 - 3.0 µm Plating 2.50 ± 0.10 1.40 ± 0.10 2.00 ± 0.10 3.43 Soldering area 3.50 ± 0.10 Materials & Finishes Base material 3.25 Soldering area Electrical Contact resistance Max current rating Environmental Operating temperature Humidity Solder systems Vibration Shock Mechanical -40˚C and +85˚C Operable in 90% relative humidity Infrared and hot air reflow In accordance with IEC 68-2-36 In accordance with IEC 68-2-27, 30 g (temp + 40˚C) Max 20 mΩ 2.0 amps nominal 3.0 amps peak 2.5mm 120220-0161 packaging: 6,000 per reel 5.00 ± 0.15 3.5mm 120220-0204 packaging: 3,600 per reel 5.50 ± 0.15 ± 0.20 1.10 ± 0.10 0.70 ± 0.03 2.66 ± 0.30 ± 0.10 1.33 ± 0.10 2.50 3.50 ± 0.15 2.80 1.65 0.47 Min At Max compression See selection table on the right for contact forces at specific mating heights ± 0.10 over 2.0µ m Ni = 3,000 cycles. (Wear resistance is subject to mating component plating spec = increased mating cycles.) Packaging Packaged in 12mm wide tape & reel packaging to EIA-481 standards © 2006 ITT Industries, Inc. Specifications and other data are based on information available at the time of printing, and are subject to change without notice. ± 0.10 component surface finish and plating type, increased mating 4.00 Maximum mating cycle based on mating PCB plated with 0.05µ Au 3.00 Soldering area 4mm 120220-0206 packaging: 3,200 per reel 2 way - 2.5mm height, 1.5 pitch 120220-0162 0.12 1.50 Universal Contact Universal Contact is an independent SMT contact which provides an electrical connection between a device and a PCB. The contact is manufactured as a single piece stamped product, incorporating pre-load and anti-lift features. The Universal Contact has been designed to replace traditional interfaces where the contact is custom designed into the component. It can be used to connect a number of device components in any direction and configuration using the same interface. Additional Advantages of using Universal Contacts • • • Qualification time reduction - same contact for many components Allows standard interface across applications and platforms Freedom to position at an angle - not fixed by mating component 3.41 ± 0.15 3.48 ±0.15 1.80 2.05 0.80 0.40 Min At Max compression 1.30 ±0.10 1.00 ±0.10 0.55 0.84 0.40 Min At Max compression 0.90 ± 0.10 0.55 0.77 ±0.10 • • • • • • Range of heights available: - 1.3mm contact with the minimum pitch of 1.35mm - 1.8mm contact with the minimum pitch of 1.25mm - 2.5mm contact the minimum pitch is 1.35mm - 3.5 & 4.0mm minimum pitch is 1.45mm Solderwell that prevents solder wicking up the contact “Side wings” protect the active parts of the contact which prevent contact from overstressing and potential damage Domed contact point allows good hertz stress and low contact resistance The X-Y-Z movement allows robust connection between the contact and component assembly during shock and vibration Compliant with WEEE and RoHS directives. 2.35 Soldering area 1.00 ± 0.10 Features & Benefits of the Design Handset • Solderless component interconnect • I/O connector / Board to board interconnect • Battery contact / Antenna contact • Grounding contact / SIM contact Laptops & Computers • Memory Stick Home Electronic Devices / White Goods • Smoke detectors / Security alarm systems • Home appliances Automotive - Keyfob Medical - CT scan equipment Industrial - Circuit breaker for GPS beckon 1.80±0.10 Applications 2.35 Soldering area 1.3mm 120220-0210 packaging: 9,500 per reel 4.87 ± 0.15 1.8mm 120220-0202 packaging: 6,800 per reel 5.00 2.80 2.87 1.19 0.74 Min At Max compression 1.02 ± 0.10 0.63 0.47 Min At Max compression 1.66 1.10 ± 0.10 0.70 Beryllium Copper Selective Au in contact area 1 µm min over Au stripe, 0.05 - 0.1 µm over Ni 1.0 - 3.0 µm Plating 2.50 ± 0.10 1.40 ± 0.10 2.00 ± 0.10 3.43 Soldering area 3.50 ± 0.10 Materials & Finishes Base material 3.25 Soldering area Electrical Contact resistance Max current rating Environmental Operating temperature Humidity Solder systems Vibration Shock Mechanical -40˚C and +85˚C Operable in 90% relative humidity Infrared and hot air reflow In accordance with IEC 68-2-36 In accordance with IEC 68-2-27, 30 g (temp + 40˚C) Max 20 mΩ 2.0 amps nominal 3.0 amps peak 2.5mm 120220-0161 packaging: 6,000 per reel 5.00 ± 0.15 3.5mm 120220-0204 packaging: 3,600 per reel 5.50 ± 0.15 ± 0.20 1.10 ± 0.10 0.70 ± 0.03 2.66 ± 0.30 ± 0.10 1.33 ± 0.10 2.50 3.50 ± 0.15 2.80 1.65 0.47 Min At Max compression See selection table on the right for contact forces at specific mating heights ± 0.10 over 2.0µ m Ni = 3,000 cycles. (Wear resistance is subject to mating component plating spec = increased mating cycles.) Packaging Packaged in 12mm wide tape & reel packaging to EIA-481 standards © 2006 ITT Industries, Inc. Specifications and other data are based on information available at the time of printing, and are subject to change without notice. ± 0.10 component surface finish and plating type, increased mating 4.00 Maximum mating cycle based on mating PCB plated with 0.05µ Au 3.00 Soldering area 4mm 120220-0206 packaging: 3,200 per reel 2 way - 2.5mm height, 1.5 pitch 120220-0162 0.12 1.50 Customer Support Locations AMERICAS 100 New Wood Road Watertown, CT 06796 Tel: 860.945.0206 Toll Free: 800.683.7666 Fax: 860.645.0303 ASIA Unit 901 & 912, West Tower, Shun Tak Center 168-200 Connaught Road Central, Hong Kong Tel: +852.2732.2720 Fax: +852.2732.2919 EUROPE Jays Close, Viables Estate Basingstoke, Hants, RG22 4BA Tel: +44.1256.311200 Fax: +44.1256.323356 www.ittcannon.com ©2007 ITT Corporation. “Engineered for life” and “Cannon” are registered trademarks of ITT Corporation. Specification and other data are based on information available at the time of printing, and are subject to change without notice. UC-apr-07