121668-0268

Cannon APD / DIN 72585 Connectors Technical Data, 37-way* APD 37-way is a highly reliable, cost effective multi-pin connector with signal contacts (multi-layout power / signal on demand). It offers wire to wire and wire to board connection solutions. According to DIN 72585, the connector is dedicated for harsh environmental usage. Various customer specific designs (e.g. different coding) are possible. Electrical Data Voltage Current Carrying Capacity: 48 VDC max. max. 12 A at 85°C / 105 °C short time, for wire size 1,5 mmΩ (for a limited no. of contacts) max. 2 A at 120°C or 5 A, for wire size 1,5 mmΩ (for a limited no. of contacts) Initially: max. 5 mΩ After climatic tests: max 10 MΩ 1.000 VAC > 1.000 MΩ Contact Resistance Test Voltage Insulation Resistance Mechanical Data Sealing acc. to IEC 60529 and DIN 40050 Operating Temperature Range Shock Vibration IP 67: 0,1 bar / 30 minutes IP 69K. Jet water 85°C -40°C / 125°C 50g / 11ms half sine IEC 60512 Sine wave 70-2.000 Hz, 18/20g 100 hours / axis, 50% of test time at 120°C (test conditions) DIN 72585 20 Mating cycles close: max 4 Nm open: min 1 Nm; max 4 Nm min 80 N Static, lateral load: 150N / 10s Dynamic impact, ball drop 2 Joules, Cable drop 1m height EN ISO 8092 23°C/ 83% - 40°C/ 95%; 168h Condensed water / SO2; 3 cycles Durability Coupling Torque Contact Retention Force Mechanical Robustness Humidity, cyclic: Industrial Atmosphere Materials Connector housing O-Ring Contacts Coupling nut PA66 FKM Copper alloy, tinned, gold-plated PA Standards and Specifications (in accordance with DIN 72585) Environmental Resistance against Fluids: Diesel DIN EN 590 Diesel + test fuel FAM2 Motor oil SAE30 Motor oil DIN 51 5111 Gearbox oil, different types e.g. SAE 80W90 Brake Fluid DIN ISO 4925 Cleaning agent 48h DIN 50021 Salt Spray Test: * Contact layout is not specified by DIN 72585 Dimensions shown in mm Specifications and dimensions subject to change www.ittcannon.com 17 Cannon APD / DIN 72585 Connectors Derating Curve Plug, 37-way For a single contact under load. 1. Cable Size: 1,5 mm2 2. Cable Size: 0,75 mm2 3. Cable Size: 0,35 mm2 37-way 32 ø5 0.8 4 1 5 10 16 23 29 34 1 5 10 4 9 15 22 28 33 37 9 15 34.2 22 40 28 33 37 23 29 34 Order No. 121583-0058 Designation APD-1BS37 Code 1 Color black (RAL 9005) ø49.4 Packaging unit 100 pcs. Socket Crimp-Contacts, Individual wire-seal, Wire filler, Flange gasket, see page 27. Accessories, see page 41 and 42. Coding 37-way layout View on Mating Face 4 9 15 1 5 10 Note: Additional coding on demand. 28 33 37 34 23 29 Dimensions shown in mm Specifications and dimensions subject to change 18 www.ittcannon.com Cannon APD / DIN 72585 Connectors Flange Receptacle, 37-way Flange Receptacle, 37-way 47 4 9 16 22 28 33 37 1 5 10 23 29 34 ø44.3 ø40 ø34.5 Order No. 249-8619-017 Designation APD-1AP37 Code 1 Color black (RAL 9005) Packaging unit 100 pcs. Pin Crimp-Contacts, Individual wire-seal, Wire filler, Flange gasket, see page 27. Accessories, see page 41 and 42. Coding 37-way layout View on Mating Face 1 6 10 4 8 16 16 23 29 34 37 22 28 33 Note: Additional coding on demand. Panel Cut Out Flange for all Flange Receptacles 37± 0.1 ø44.3 41 ± 0.05 .5 Dimensions shown in mm Specifications and dimensions subject to change www.ittcannon.com 19 ø40 Cannon APD / DIN 72585 Connectors CONTACTS 37-/ 51-way Contacts • • • • • Low contact resistance (max. 5mΩ) for maximum signal integrity Current carrying capacity: 12A max. Press-in contacts for PCB mounting Plating with special material available by request Machined press-in contacts. (other machined contacts available by request) For APD 37-way and 51-way Standard Version Contacts (stamped & formed) Plating Crimp Range 0,35 - 0,75 mm2 0,75 - 1,50 mm2 gold (0,8 µm) tin Pin Contacts gold (0,8 µm) 0,35 - 0,75 mm 2 Designation APK-SA16A07-002-C APK-SA16A15-002-C APK-SA16G07-002-C APK-SA16G15-002-C APK-PA16A07-002-C APK-PA16A15-002-C APK-PA16G07-002-C APK-PA16G15-002-C Part Number 121668-0220 121668-0222 121668-0266 121668-0268 121668-0254 121668-0255 121668-0265 121668-0267 tin Socket Contacts 0,75 - 1,50 mm2 0,35 - 0,75 mm 2 0,75 - 1,50 mm2 0,35 - 0,75 mm 2 0,75 - 1,50 mm2 Press-In Contacts (machined) tin Pin Contacts gold (0,8 µm) 0,30 - 0,60 mm2 0,50 - 1,00 mm2 APK-PA16A06-E APK-PA16G10-E 330-8674-020 330-8674-025 For APD 51-way Secondary Lock Version Contacts (stamped & formed) tin Socket Contacts gold (0,8 µm) tin 0,35 - 0,75 mm2 Pin Contacts gold (0,8 µm) 0,75 - 1,50 mm 2 0,35 - 0,75 mm2 0,75 - 1,50 mm 2 APK-SA16A07-002 APK-SA16A15-002 APK-SA16G07-002 APK-SA16G15-002 APK-PA16A07-002 APK-PA16A15-002 APK-PA16G07-002 APK-PA16G15-002 121668-0221 121668-0202 121668-0270 121668-0272 121668-0252 121668-0253 121668-0269 121668-0271 0,35 - 0,75 mm2 0,75 - 1,50 mm 2 0,35 - 0,75 mm2 0,75 - 1,50 mm2 Accessories Description Single Wire Sealing Cross Section 1,2 - 1,6 mm 1,4 - 2,0 mm 1,9 - 2,1 mm Color Red Grey Yellow White Designation 10RD3940 10GR3940 10YE3940 10WH3940 Part Number 273-8506-010 273-8506-008 273-8506-009 273-8506-011 Blind Seal 1,4 - 2,0 mm Description Dust cap for APD 37-way (plug) Dust cap for APD 37-way (receptacle) Part Number 025-8636-037 025-8636-053 Dimensions shown in mm Specifications and dimensions subject to change www.ittcannon.com 27