252-8553-000

MS C O N N E C T O R S MS-6/898 MS Connectors Contents General Information ......................................................................................... 2 Contact Arrangements ...................................................................................... 5 Wall Mounting Receptacles .............................................................................. 12 Cable Connecting Plugs .................................................................................13 Box Mounting Receptacles ............................................................................. 14 Straight Plug ..................................................................................................... 14 90° Angle Plug ................................................................................................ 15 Straight Plugs, CA-F Types ............................................................................ 16 Straight Plugs, CA-E Typ ................................................................................. 17 Through-Bulkhead ............................................................................................. 17 Straight Plugs, CA-EA/EB Type ...................................................................... 18 Accessories ..................................................................................................... 19 Tools for Crimp Contacts ................................................................................. 23 Product Safety Information ............................................................................. 24 coupling dimensions. This allows mating of the different classes of these connectors. The connectors of class E, F and R are designed to operate in extreme environmental conditions. These connectors are completely sealed to withstand moisture, condensation, vibration and flash-over. MS-F and MS-R connectors have a resilient grommet around each wire. This allows the wires to slide through the grommet with a minimum of friction. Yet when the ferrule is sealed, and the endbells tightened, it provides perfect wire seal through a wide variety of wire diameters. This seal at the rear plus the interfacial seal at the front, effect a completely environmental resistant assembly when the plug is mated to an F or R receptacle. Class Differences Introduction Connector classes MS 3106F, MS 3106R and MS 3108R feature an O-ring under the coupling nut. It is missing on connectors class MS 3106E and MS 3108E. This catalogue describes ITT Cannon connectors designed and manufactured to MIL-C-5015, the military specification covering MS electrical connectors. These connectors were originally designed for aircraft, but are now widely used in many other fields. They are particularly suitable for commercial applications requiring low cost and high reliability. To reduce size and weight, connector classes MS 3100R, MS 3101R and MS 3106R have no cable strain relief. The 90° angle plug MS 3106R has no cable clamp and is suitable for hose connection. Strain relief for this connector has to be ordered separately (see page 19). Moreover, construction and materials used are identical for all connector classes. The design of connector classes MS-E, MS-F and MS-R conform to MIL-C-5015 D. The new class F connectors supersede the previous class E connectors. For new programs only class F should be ordered. Different Designations The coupling measurements as well as the dimensions of class MS-E, -F and -R are in accordance with the latest revision of VG 0095342. Wall mount receptacle, box receptacle, cable connector and straight plug have the same Connectors with MS designation conform to MIL-C-5015 in respect of dimensions and contact arrangements. Deviations from this specification, e. g. crimp contacts, other shell or contact finishes, are designated CA. Design Features Straight Plug (E- and F-Type) O Ring MS-F only Straight Plug (R-Type) Bushing 2LS Endbell Ferrule Grommet Pin contacts Insulator Coupling Nut Barrel O Ring Subject to changes Shell styles and designations Wall mounting receptacles MS 3 100 and F/CA 3100F Dimensions/sizes Page 12 Wall mounting receptacle MS 3100R/CA 3100R Dimensions/sizes Page 12 Cable connecting plug MS 3101E and F/CA 3101E Dimensions/sizes Cable connecting plug MS 3101R/CA 3101R Dimensions/size Straight plug MS 3106E and F/CA 3106E Dimensions/sizes Page 14 Straight plug MS 3106R/CA 3106R Dimensions/sizes Page 15 Straight plug CA 3106F Dimensions/sizes Page 16 Page 13 Page 13 90° Angle plug MS 3108E and R/CA 3108E/F/R 1) 1) MS 3108R, CA 3108F/R without cable clamp Box mounting receptacle MS 3102R/CA 3102E/R Dimensions/sizes 3 Page 14 Accessories: Cable clamp, Telescoping bushing, Sealing gaskets, Reduction sleeves, Dust caps with and without chain, etc. Page 15 Pages 19 – 23 MS Connectors Part Number Explanation MS CA 3106 3106 R F 18-1 18-1 P S W - * F80* Prefix MS – conform to MIL-C-5015 CA – acc. to MIL-C-5015, except modifications Modifications A176 Contacts hard gold over nickel Shell style (see pages 12 – 16) 3100 – wall mounting receptacle 3101 – Cable connecting plug 3102 – Box mounting receptacle 3106 – Straight plug 3108 – 90ϒ plug Class E– F 80 - Snap-in crimp contacts for AWG Size conductors F183 - Snap-in crimp contacts for Metric conductors (Crimp contacts are supplied as loose pieces. After wiring they are inserted into the insulator by the customers) with resilient insulator and integral clamp for cable strain relief Alternate insert position F- same as E, however style 3106 with O-ring seal under the coupling nut Contact type P – pin S – socket R- with resilient insulator and shortened, lightweight endbell (additional sealing with O-ring under the coupling nut for shell styles 3106 and 3108) Contact arrangements See pages 6 through 11 Shell size 10S, 12S, 12, 14S, 14, 16S, 16, 18, 20, 22, 24, 28, 32 and 36 Electrical Data Standard Data Shell Material Finish Insulator Material Contacts Material Finish Termination Operating Temperature Nominal current and potential drop Maximum current ratings of contacts and maximum allowable voltage drop under test conditions when assembled as in service are shown below. Aluminum alloy Olive drab chromate coating over cadmium plating Polychloroprene (resilient) acc. to MI-R-3065 Copper alloy or brass Silver plated, solder pots tinned Crimp or solder for AWG and metric contact size Contact size AWG Contact size metric Wire size (mm2) Current rating (A)* Potential drop (mV) 16S/16 15S/15 1.0/1.5 22 6 12 2.5 2.5 41 3 8 100 10 73 1 4 160 16 135 0.3 0 500 50 245 0.2 *measured between the contacts at +25-3 °C -55/125°C Service rating Separation Force (N) Contact sizes Min. separation force AWG Metr. 10 0,3 16S/16 12 15S/15 245 1,0 1,5 8 100 3 4 160 4 0 500 8,5 Please note: Connector classes 00E/F, 01E/F, 06E/F and 0/E are always delivered with cable bushing. Dimensions of cable bushing see page 19. 4LS MS connectors show no evidence of breakdown when the test voltage given below is applied between the two closest contacts and between the shell and the contacts closest to the shell for a period of one minute. High potential test voltage is conducted in VG 95319 part 2 test no. 5.13 and VG 95210 part 31. MS Service rating Test voltage Veff 50 Hz Air spacing mm Creeping distance mm Instruments 1050 0.7 0.7 A 1600 1.1 1.1 D 2500 2.8 2.8 E 3000 4.8 4.8 Subject to changes MS Connectors Wire Selection The connectors are designed for individual wiring. Spray water and moisture resistance are only guaranteed if wires according to MIL-W-5086, LN 9251 (for AWG diameters), TL 6145-009 and TL 6145-011 (for metric diameters) are used. When using wires which do not corespond to these specifications the wire diameters and outer dimensions of the insulation indicated in above table have to be adhered to. Contact size Size -/ 10 16S/15S 16 / 15 12 / 15 8 / 100 4 / 160 0 / 500 Conductor size for solder contacts AWG mm2 16-22 16-22 12-14 8 - 10 4-6 0-2 1,2 - 0,4 1,2 - 0,4 3,5 - 2,0 8,5 - 4,5 21,5 - 13,5 53,0 - 33,5 for crimp contacts AWG conductor ∅ mm 16 1,25 - 1,7 16 1,25 - 1,7 12 1,95 - 2,2 8 4,0 - 4,5 4 6,0 - 6,9 0 10,6 - 11,5 metric mm2 0,75 1,0 1,0 - 1,7 1,0 - 1,5 2,5 10 16 50 conductor ∅ mm 1,0 - 1,4 1,25 - 1,7 1,25 - 1,7 1,95 - 2,2 4,3 - 4,8 5,2 - 6,0 9,6 - 10,7 Insulation sizes (in mm) for AWG contacts 1,63 - 3,3 1,63 - 3,3 2,9 - 4,3 2,9 - 6,4 7,0 - 9,4 10,6 - 14,0 Shell Sizes and Contact Arrangements On pages 6 – 9 the contact arrangements are shown by number of contacts. The shell size and the contact arrangement number are given in a designation of bold figures below each contact arrangement: The digits preceding the dash refer to the shell size. The digits following the dash are the contact arrangement numbers. Under the contact arrangement designation the number of contacts and the contact size are indicated. The recommended wire sizes and the electrical data can be seen on page 4. The capital letters on the bottom refer to the service rating group. Max. operating voltage is given in the table on page 4. Alternated Insert Positions Alternate insert positions are available to prevent cross-plugging of adjacent assemblies. The diagram with the degrees of rotation is shown on this page first. All MS qualified insert positions are listed on pages 6 – 9. Other positions than N (Normal) are not available from stock. 5 Pin front view metric contacts 2,0 - 2,5 2,2 - 2,8 2,2 - 2,8 3,1 - 3,5 5,9 - 6,5 7,1 - 7,7 12,1 - 12,8 Contact arrangements 1 Contact Contacts (number - size) Service rating (see page 4) 2 Contacts 12-5 1 - 12 18-6 1-4 20-2 1-0 22-7 1-0 10SL-4 2 - 16 12S-3+ 2 - 16 14S-9+ 2 - 16 16-11+ 2 - 12 18-3+ 2 - 12 D D D E A A A A D 20-19+ 3-8 22-2+ 3-8 22-9+ 3 - 12 A D E 20-24+ 2 - 16 A, C 2 - 8 B, D A 22-22+ 4-8 24-22+ 4-8 A D 3 Contacts Contacts (number - size) Service rating 32-5+ 2-0 10SL-3 3 - 16 14S-1 3 - 16 14S-7 3 - 16 D A A A 16-7+ 2 - 16 A, B 1-8C A 16-10+ 3 - 12 18-5+ 1 - 16 A 2 - 12 B, C D A 4 Contacts Contacts (number - size) Service rating 14S-2+ 4 - 16 16-9+ 2 - 16 B, D 2 - 12 A, C A INST 18-4+ 4 - 16 18-10+ 4 - 12 D A 18-13+ 3 - 12 B, C 1-8A A 20-4+ 4 - 12 D Shell Sizes and Contact Arrangements No. of contacts 2 3 4 6LS Contact arrangement 12S-3* 14S-9 16-11 32-5 14S-7* 16-7 16-10* 18-5 20-19 22-2 22-9 14S-2 16-9 18-4 W 70 70 35 35 90 80 90 80 90 70 70 35 35 Degrees of rotation X Y 145 215 145 215 110 250 110 250 180 270 110 250 180 270 110 250 180 270 145 215 145 215 120 240 110 250 110 250 Z 290 290 325 325 280 280 290 290 325 325 No. of contacts 4 Contact arrangement 18-10 18-13* 20-4 20-24 22-22 24-22 32-17 36-5 W 80 45 35 45 45 - Degrees of rotation X Y 120 240 110 250 110 250 110 250 110 250 110 250 110 250 120 240 Z 280 325 - *Note: For alternate positions of these contact arrangements a tendency to overmate can be stated.It is within the customer’s responsibility to use these insert positions. Subject to changes Contact arrangements 5 Contacts Contacts (Number/Size) Service rating (see page 4) 32-17+ 4-4 36-5+ 4 -0 14S-5+ 5 - 16 16S-8+ 5 - 16 18-11+ 5 - 12 D A INST A A 6 Contacts Contacts number - size Service rating 32-1+ 3 - 12 A, C, D 2 - 0 B, E E (A) 22-12+ 3 - 16 A, C, D 2 - 8 B, E D 24-12 3 - 12 2-4 A 7 Contacts 14S-6 6 - 16 18-12+ 6 - 16 INST A 20-8 4 - 16 B, C, E, F 2 - 8 A, D INST 20-17+ 1 - 16 F 5 - 12 A-E A 16S-1 7 - 16 18-9+ 5 - 16 B, C, E-G 2 - 12 A, D INST A 20-15+ 7 - 12 A 8 Contacts Contacts number - size Service rating 22-28+ 7 - 12 24-2+ 7 - 12 24-10+ 7-8 A D A Shell Sizes and Contact Arrangements 18-8+ 7 - 16 A-G 1 - 12 H A No. of contacts 5 6 Pin front view; shell rotation 7 Legend ● Inserts to MIL-C-5015 + MS Polarization ▼ VG Contact arrangements 7 8 Contact arrangement 14S-5 16S-8 18-11 22-12 32-1 18-12 20-8 20-17 16S-1* 18-9 20-15 24-2 24-10 18-8 20-7 22-23 W 80 80 80 90 80 80 80 80 80 70 80 35 20-7+ 8 - 16 22-23+ 8 - 12 A (C-F) D (H) Degrees of rotation X Y 110 170 265 170 265 110 250 110 250 110 250 180 270 110 250 110 250 250 Z 280 280 280 280 280 280 280 280 290 280 - Contact arrangements 9 Contacts Contacts (number - size) Service rating 20-16+ 7 - 16 A-G 2 - 12 H, I A 10 Contacts 20A9 9 - 12 22-20+ 9 - 16 D (J) A all others A A all others 22-27+ 8 - 16 A-H 1-8J D (J) 11 Contacts Contacts (number - size) Service rating Contacts (number - size) Service rating 20-33 11 - 16 24-20+ 9 - 16 A-D, G-L 2 - 12 E, F D A 24-11+ 6 - 12 A-C, G-I 3 - 8 D-F A 28-2009-16+ 5 - 16 A, D-F, J 4 - 4 B, C, G, H A 18-1+ 10 - 16 A (B, C, F, G) INST all others 12 Contacts 14 Contacts 24-19 12 - 16 20-27+ 14 - 16 22-19+ 14 - 16 A A A 16 Contacts 17 Contacts 19 Contacts 24-7+ 14 - 16 A-M, O 2 - 12 A 20-29+ 17 - 16 22-14+ 19 - 16 20A48 19 - 15 A A INST 28-20+ 4 - 16 K-N 10 - 12 A-J, P A 22 Contacts 28-11+ 18 - 16 A-I, N-X 4 - 12 J-M A Shell Sizes and Contact Arrangements No. of contacts 9 10 11 14 16 17 19 22 8LS Contact arrangement 20-16 22-20 22-27 24-11 28-2009-16 18-1* 20-33 24-20 20-27 22-19 28-20 24-7 20-29* 22-14* 28-11 W 80 35 80 35 110 70 110 80 35 80 80 80 80 80 80 Degrees of rotation X Y 110 250 110 250 250 110 250 250 260 145 215 130 260 110 250 110 250 110 250 110 250 110 250 110 250 Pin front view; shell rotation Z 280 325 280 325 280 290 280 325 280 280 280 280 280 280 Legend ● Inserts to MIL-C-5015 + MS Polarization ▼ VG Contact arrangements Subject to changes Contact arrangements Contacts (number - size) Service rating Contacts (number - size) Service rating 23 Contacts 24 Contacts 26 Contacts 28 Contacts 32-6+ 16 - 16 A - O, S 2 - 12 U, V 3 - 8 P, T, 2 - 4 W, X A 24-28+ 24 - 16 28-12+ 26 - 16 28A63 19 - 15 9 - 25 INST A A for e, INST all others 30 Contacts 35 Contacts 32-8+ 24 - 16 A-L, T-Z, a-e 6 - 12 M-S A 28-15+ 35 - 16 A 32-7+ 28 - 16 A-N, W-Z, a-k 7 - 12 O-V INST A, B, h, j - A all others 37 Contacts 48 Contacts 28-21+ 37 - 16 36-10+ 48 - 16 A A 61 Contacts Contacts (number - size) Service rating 32A69 41 - 10 20 - 15 INST Shell Sizes and Contact Arrangements No. of contacts 23 24 26 30 35 32 48 61 Contact arrangement 32-6 24-26 28-12 32-8 28-15 32-7 28-21 36-10 32A69 W 80 80 90 80 80 80 80 80 - Degrees of rotation X Y 110 250 110 250 180 270 125 235 110 50 125 235 110 250 125 235 110 250 Pin front view; shell rotation Z 280 280 280 280 280 280 280 Legend Note: For alternate positions of these contact arrangements a tendency to overmate can be stated.It is within the customer’s responsibility to use these insert positions. 9 ● Inserts to MIL-C-5015 + MS Polarization ▼ VG Contact arrangements Contact arrangements Contact arrangement No. of contacts Wire size AWG mm2 Amp. Service group Weight Polychloroprene insert lbs. gr. Shell size 10S/10SL Contact arrangement No. of contacts Wire size AWG mm2 Amp. Service group Weight Polychloroprene insert lbs. gr. Shell size 18 10SL-3 3 16 1,5 22 A P.010 S.017 4 8 18-8 1 7 12 16 2,5 1,5 41 22 A P.044 S.062 20 28 10SL-4 2 16 1,5 22 A P.009 S.014 4 6 18-9 2 5 12 16 2,5 1,5 4 22 Inst. P.045 S.062 20 28 18-10 4 12 2,5 41 A P.046 S.067 21 30 18-11 5 12 2,5 41 A P.049 S.071 22 32 18-12 6 16 1,5 22 A P.039 S.054 18 24 1 8 10,0 73 A P.S.- - Shellk size 12/12S 12S-3 2 16 1,5 22 A 12-5 1 12 2,5 41 D P.010 S.016 P.- 5 7 - Shell size 14/14S 14S-1 14S-2 3 4 16 16 1,5 1,5 22 22 A Inst. P.S.- - 18-13 P.019 S.028 9 13 Shell size 20 14-5 5 16 1,5 22 Inst. P.017 S.029 8 13 20-1 1 0 50 245 D P.092 S.101 41 45 14S-6 6 16 1,5 22 Inst. P.031 S.015 15 7 20-4 4 12 2,5 41 D P.057 S.086 26 38 14S-7 3 16 1,5 22 A P.015 S.024 7 11 20-7 8 16 1,5 22 P.053 26 P.013 S.022 6 10 A (C,D,E,F) D (A,B.H.G) S.076 34 14S-9 2 16 1,5 22 A 20-15 7 12 2,5 41 A P.068 S.100 30 45 Shell size 16/16S 16S-1 7 16 1,5 22 A P.025 S.042 11 19 20-16 2 7 12 16 2,5 1,5 41 22 A P.059 S.084 26 38 16-7 1 2 5 8 16 16 10,0 1,5 1,5 73 22 22 A 10 20-17 5 1 12 16 2,5 1,5 41 22 A P.068 S.098 31 38 A P.S.P.023 20-19 3 8 10,0 73 A S.039 P.031 S.044 18 14 20 P.068 S.091 31 41 20-24 2 2 8 16 10,0 1,5 73 22 A P.062 S.085 28 38 P.031 S.047 14 21 20-27 14 16 1,5 22 A P.062 S.082 28 37 P.028 S.042 13 19 20-29 17 16 1,5 22 A P.065 S.085 29 38 P.031 S.047 14 21 20-33 11 16 1,5 22 A P.057 S.079 25 35 20A9 9 - 2,5 41 D for J A (B,C,F,G) P.044 Inst. (all others) S.058 20 P.020 S.033 9 15 20A48 19 - 1,5 22 Inst. P .020 S.036 16 16S-9 16-9 16-10 16-11 16-12 2 2 12 16 2,5 1,5 41 22 A A 3 12 2,5 41 A 2 1 12 4 2,5 16,0 41 135 A A Shell size 18 18-1 18-3 18-4 10 2 4 18 12 16 1,5 2,5 1,5 22 41 22 D D 26 P.038 S.057 17 26 20-8 P.037 S.053 17 24 Shell size 22 4 2 16 8 1,5 10 22 73 Inst. P.059 S.080 26 36 18-5 2 1 12 16 2,5 1,5 41 22 D P.040 S.059 18 27 22-2 3 8 10 73 D P.077 S.104 34 47 18-5 1 4 16,0 13,5 D P.048 S. - 22 - 22-7 1 0 50 245 E P.101 S.- - 10 LS Subject to changes Contact arrangements Contact arrangement No. of contacts Wire size AWG mm2 Amp. Service group Weight Polychloroprene insert lbs. gr. Shell size 22 Contact arrangement No. of contacts Wire size AWG mm2 Amp. Service group Weight Polychloroprene insert lbs. gr. Shell size 28 22-9 3 12 2,5 41 E P.062 S.092 28 42 28-11 4 18 12 16 2,5 1,5 41 22 A P.131 S.182 59 53 22-12 2 3 8 16 10 1,5 73 22 D P.072 S.100 32 45 28-12 26 16 1,5 22 A P.127 S.172 57 78 22-14 19 16 1,5 22 A P.077 S.100 34 45 28-15 35 16 1,5 22 A P.139 S.181 63 82 22-19 14 16 1,5 22 A P.070 S.095 31 43 28-20 10 4 12 16 2,5 1,5 41 22 A P.134 S.196 80 89 22-20 9 16 1,5 22 A P.063 S.090 29 41 28-21 37 16 1,5 22 A P.142 S.183 64 83 22-22 4 8 10 73 A P.085 S.112 38 50 28-2009-16 4 5 4 16 16 1,5 135 22 A P.S.- - 22-23 8 12 2,5 41 D (H) A (all others) P.080 36 28A63 19 - 1,5 22 A for E P.042 S.077 19 35 S.118 53 2 3 0 12 50 2,5 245 41 E (A) D (all others) P.- - S.- - Shell size 32 22-27 22-28 1 8 8 16 10 2,5 73 22 A (H) D (J) P.070 S.097 31 44 7 12 2,5 41 A P.086 S.120 38 54 32-1 32-5 2 0 50 245 D P.S.- - 32-6 2 3 2 16 4 8 12 16 16 10 2,5 1,5 135 73 41 22 A P.-223 S.287 101 130 32-7 7 12 2,5 41 P.198 89 28 16 1,5 22 Inst. (A,B,h,j) D (all others) S.274 124 Shell size 24 24-2 7 12 2,5 41 D P.089 S.133 40 60 24-7 2 14 12 16 2,5 1,5 41 22 A P.090 S.125 40 56 24-10 7 8 10 73 A P.125 S.157 56 71 P.111 S.153 50 69 32-6 6 24 12 16 2,5 1,5 41 22 A P.189 S.265 86 120 P.027 S.051 12 23 32-17 4 4 16 135 D P.223 S.283 101 129 P.S.- - 32A69 41 20 - 1,0 1,5 7,5 22 Inst. P.119 S.121 54 55 P.083 S.120 37 54 Shell size 36 24-11 24-12 24-19 24-20 3 6 8 12 10 2,5 73 41 A 3 2 12 4 10 16 41 135 A 12 16 1,5 22 A 2 9 12 16 2,5 1,5 41 22 D 24-22 4 8 10 73 D P.S.132 59 36-5 4 0 50 245 A P.S.- - 24-28 24 16 1,5 22 Inst. P.096 S.126 43 57 36-10 48 16 1,5 22 A P.214 S.321 97 145 For additional contact arrangements please consult factory. 11 Wall mounting receptacle MS3100E / CA3100E MS3100F MS3100E and F are wall mounting receptacles which mate with 3106 and 3108 plugs. Note: MS3100E corresponds to MS3100F and is available upon request. For new programs please order MS3100F only. If crimp version is required please order CA3100E...F80 or CA3100E...F183 Part Number Pin Insert* A B min. E1) max. K ±0,7 L max. M +0,4 R ±0,1 S ±0,3 V max. W max. MS3100E10SL-**P MS3100E-12S-**P MS3100E14S-**P MS3100E16S-**P MS3100E12-**P MS3100E14-**P MS3100E16-**P MS3100E18-**P MS3100E20-**P MS3100E22-**P MS3100E24-**P MS3100E28-**P MS3100E32-**P MS3100E36-**P 5/8-24 EF-2A 3/4-20UNEF-2A 1/8-20UNEF-2A 1 -20UNEF2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1 -20UNEF-2A 1-1/8-18NEF-2A 1-1/4-18NEF-2A 1-3/8-18NEF-2A 1-1/2-18NEF-2A 1-3/4-18NS-2A 1 -18NS-2A 2-1/4-16UN-2A 9,5 9,5 9,5 9,5 15,8 15,8 15,8 15,8 15,8 15,8 15,8 15,8 15,8 15,8 6,5 6,5 9,0 11,0 6,5 9,0 11,0 14,2 15,8 15,8 21,4 21,4 26,7 31,7 3,0 3,0 3,0 3,0 3,0 3,0 3,0 3,9 3,9 3,0 3,9 3,0 3,9 3,9 60 60 70 70 70 70 70 77 77 77 77 85 85 105 14,2 14,2 14,2 14,2 19,0 19,0 19,0 19,0 19,0 19,0 20,6 20,06 22,2 22,2 18,2 20,6 23,0 24,6 20,6 23,0 24,6 27,0 29,4 31,8 34,9 39,7 44,5 49,2 25,4 28,0 30,0 32,5 28,0 30,0 32,5 35,0 38,0 41,0 44,5 50,8 57,0 63,5 22,7 22,7 27,5 30,0 22,7 27,5 30,0 32,2 37,5 37,5 43,3 43,3 51,7 58,0 27,0 27,0 34,0 38,0 27,0 34,0 38,0 40,5 47,5 47,5 54,0 54,0 64,5 73,0 **Add contact arrangement number (see pages 5-11) *For socket inserts substitute S for P 1) T +0,2 -0,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,7 3,7 4,4 4,4 maximum cable diameter MS3100R / CA3100R The MS3100R receptacles feature a shorter leightweight endbell and mate with 3106 and 3108 plugs. If crimp version is required please order CA3100R...F80 or CA3100R...F183 Part Number Pin Insert* A B min. K ±0,7 L max.: M +0,4 P max. R ±0,1 S ±0,3 MS3100R-10SL-**P MS3100R-12S-**P MS3100R14S-**P MS3100R16S-**P MS3100R12-**P MS3100R14-**P MS3100R16-**P MS3100R18-**P MS3100R20-**P MS3100R22-**P MS3100R24-**P MS3100R26-**P MS3100R32-**P MS3100R36-**P 5/8-24NEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1 -20UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1 -20UNEF-2A 1 1/8-18NEF-2A 1-1/4-18NEF-2A 1-3/8-18NEF-2A 1-1/2-18NEF-2A 1-3/4-18 S-2A 2 -18NS-2A 2-1/4-16UN-2A 9,5 9,5 9,5 9,5 15,8 15,8 15,8 15,8 15,8 15,8 15,8 15,8 15,8 15,8 3,0 3,0 3,0 3,0 3,0 3,0 3,0 3,9 3,9 3,9 3,9 3,9 3,9 3,9 45 45 55 55 55 55 55 60 60 60 60 67 67 85 14,2 14,2 14,2 14,2 19,0 19,0 19,0 19,0 19,0 19,0 20,6 20,6 22,2 22,2 24,4 24,4 29,0 31,5 24,4 29,0 31,5 36,6 39,7 39,7 47,4 47,4 55,9 60,8 18,2 20,6 23,0 24,6 20,6 23,0 24,6 27,0 29,4 31,8 34,9 39,7 44,5 49,2 25,4 28,0 30,0 32,5 28,0 30,0 32,5 35,0 38,0 41,0 44,5 50,8 57,0 63,5 T +0,2 -0,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,7 3,7 4,4 4,4 **Add contact arrangement number (see pages 5-11) *For socket inserts substitute S for P 12 LS Subject to changes Cable connecting plug MS3101E/CA3101E MS3101F MS3101E and F are cable connecting plugs without flange and coupling nut. MS3101E and F mate with 3106 and 3108 plugs. For new programs order MS3101F only. If crimp version is required please order CA3101E...F80 or CA3101E...183 Part Number Pin Insert* MS3101E10SL-**P MS3101E12S-**P MS3101E14S-**P MS3101E16S-**P MS3101E12-**P MS3101E14-**P MS3101E16-**P MS3101E18-**P MS3101E20-**P MS3101E22-**P MS3101E24-**P MS3101E28-**P MS3101E32-**P MS3101E36-**P A 5/8-2ENEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1 -20U EF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1 -20UNEF-2A 1-1/8-18NEF-2A 1-1/4-18NEF-2A 1-3/8-18NEF-2A 1-1/2-18NEF-2A 1-3/4-18NS-2A 2 -18NS-2A 2-1/4-16UN-2A B min. 9,5 9,5 9,5 9,5 15,8 15,8 15,8 15,8 15,8 15,8 15,9 15,8 15,8 15,8 E 1) max. 6,5 6,5 9,0 11,0 6,5 9,0 11,0 14,2 15,8 15,8 21,4 21,4 26,7 31,7 G max. 21,8 25,0 28,2 31,4 25,0 28,2 31,4 34,5 37,6 41,0 43,8 50,5 57,0 63,2 **Add contact arrangement number (see pages 5-11) *For socket inserts substitute S for P K ±0,7 3,0 3,0 3,0 3,0 3,0 3,0 3,0 3,9 3,9 3,9 3,9 3,9 3,9 3,9 1) L max. 60 60 70 70 70 70 70 77 77 77 77 85 85 1k05 M +0,4 14,2 14,2 14,2 14,2 19,0 19,0 19,0 19,0 19,0 19,0 20,6 20,6 22,2 22,2 P max. 24,4 24,4 28,8 31,5 24,4 29,0 31,5 36,6 39,7 39,7 47,4 47,4 55,9 60,8 S max. 16,2 19,3 22,5 25,6 19,3 22,5 25,6 28,8 32,0 35,2 38,4 44,8 51,2 57,5 V max. 22,7 22,7 27,5 30,0 22,7 27,5 30,0 32,2 37,5 37,5 43,3 43,3 51,7 58,0 maximum cable diameter MS3101R / CA3101R MS3101 cable connecting plugs without coupling nut feature a shorter and lightweight endbell than MS3101E and mate with 3106 and 3108 plugs. If crimp version is required please order CA3101R..F80 or CA3101R...F183 Part Number Pin Insert* MS3101R10SL-**P MS3101R12S-**P MS3101R14S-**P MS3101R16S-**P MS3101R12-**P MS3101R14-**P MS3101R16-**P MS3101R18-**P MS3101R20-**P MS3101R22-**P MS3101R24-*P MS3101R28.**P MS3101R32-**P MS3101R36-**P A 5/8-24NEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1 -20UNEF-2A 3/4-0UNEF-2A 7/8-20UNEF-2A 1 -20UNEF-2A 1-1/8-18NEF-2A 1-1/4-18NEF-2A 1-3/8-18 EF-2A 1-1/2-18NEF-2A 1-3/4-18NS-2A 2 -18NS-2A 2-1/4-16UN-2A B min. 9,5 9,5 9,5 9,5 15,8 15,8 15,8 15,8 15,8 15,8 15,8 15,8 15,8 15,8 G max. 21,8 25,0 28,2 31,4 25,0 28,2 31,4 34,5 37,6 41,0 43,8 50,5 57,0 63,2 *Add contact arrangement number (see pages 5-11) *For socket inserts substitute S for Pin 13 K ±0,7 3,0 3,0 3,0 3,0 3,0 3,0 3,0 3,9 3,9 3,0 3,9 3,9 3,9 3,9 L max. 45 45 55 55 55 55 55 60 60 60 60 67 67 85 M +0,4 14,2 14,2 14,2 14,1 19,0 19,0 19,0 19,0 19,0 19,0 20,6 20,6 22,2 22,2 P max. 24,4 24,4 29,0 31,5 24,4 29,0 31,5 36,6 39,7 39,7 47,4 47,4 55,9 60,8 S max 16,2 19,9 22,5 25,6 19,3 22,5 25,6 28,8 32,0 35,2 38,4 44,8 51,2 57,5 W max. 27,6 27,0 34,0 38,0 27,0 34,0 38,0 40,5 47,5 47,5 54,0 54,0 64,5 73,0 Box Mounting Receptacles / Straight Plugs MS3102E MS3102R CA3102E MS3102E and R are box mounting receptacles with square flange and mate with 3106 and 3108 plugs. If crimp version is required please order CA3102R...F80 or CA3102R...F183. X Dimension Max. Solder Pot Extension - Pin or Socket Contact Size Shell size 16 12 8 4 10SL 13,6 12S, 14S, 16S 13,2 12 17,9 17,9 14 17,9 17,9 19,5 16 17,9 17,9 19,5 18 17,1 17,1 18,7 18,7 20, 22 17,1 17,1 18,7 18,7 24, 28 15,5 15,5 17,1 17,1 32, 36 13,9 13,9 15,5 15,5 0 24,7 23,1 21,5 Note: For new programs order MS3102R only. Part Number Pin Insert* A B min. K ±0,7 L max. M +0,4 P max. R ±0,1 S ±0,3 MS3102R10SL-**P MS3102R12S-**P MS3102R14S-**P MS3102R16S-**P MS3102R16S-**P MS3102R12-**P MS3102R14-**P MS3102R16-**P MS3102R18-**P MS3102R20-**P MS3102R22-**P MS3102R24-**P MS3102R28-**P MS3102R32-**P MS3102R36-**P 5/8-24NEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1 -20U EF-2A 1 -20UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1 -20UNEF2A 1-1/8-18NEF-2A 1-1/4-18NEF-2A 1-3/8-18NEF-2A 1-1/2-18NEF-2A 1-3/4-18NS-2A 2 -18NS-2A 2-1/4-16UN-2A 9,5 9,5 9,5 9,5 9,5 15,8 15,8 15,8 15,8 15,8 15,8 15,8 15,8 15,8 15,8 3,0 3,0 3,0 3,0 3,0 3,0 3,0 3,0 3,9 3,9 3,9 3,9 3,9 3,9 3,9 25,1 25,1 25,1 25,1 25,1 34,6 34,6 34,6 34,6 34,6 34,6 36,2 36,2 37,8 37,8 14,2 14,2 14,2 14,2 14,2 19,0 19,0 19,0 19,0 19,0 19,0 20,6 20,6 22,2 22,2 15,9 15,9 19,0 22,2 22,2 15,9 19,0 22,2 25,4 29,0 32,2 35,3 41,2 47,6 52,4 18,2 20,6 23,0 24,6 24,6 20,6 23,0 24,6 27,0 29,4 31,8 34,9 39,7 44,5 49,2 25,4 28,0 30,0 32,5 32,5 28,0 30,0 32,5 35,0 38.0 41,0 44,5 50,8 57,0 63,5 T +0,2 -0,2 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,7 3,7 4,4 4,4 **Add contact arrangement number (see pages 5-11) *For socket inserts substitute S for P If crimp version is required please order CA3106E...F80 (without O ring), CA3106E...F183(without O ring) or CA06R...F183 (with O ring). MS3106E / CA3106E MS3106F / CA06R MS3106E and F are straight plugs. They mate with 3100 and 3102 receptacles and 3101 plugs. Note: MS3106 E corresponds to MS3106F, however MS3106F has an O ring seal.For new programs order MS3101F only. Part Number Pin Insert MS3106E10SL-**P MS3106E12S-**P MS3106E14S-**P MS3106E16-**P MS3106E12-**P MS3106E14-**P MS3106E16-**P MS3106E18-**P MS3106E20-**P MS3106E22-**P MS3106E24-**P MS3106E28-**P MS3106E32-**P MS3106E36-**P A 5/8-24NEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1 -20UNEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1 -20UNEF-2B 1-1/8-18NEF-2B 1-1/4-18NEF-2B 1-3/8-18NEF-2B 1-1/2-18NEF-2B 1-3/4-18NS-2B 2 -18NS-2B 2-1/4-16UN-2B E 1) max. 6,5 6,5 9,0 11,0 6,5 9,0 11,0 14,2 15,8 15,8 21,4 21,4 26,7 31,7 L max. 55,0 55,0 60,0 60,0 70,0 70,0 70,0 75,0 75,0 75,0 75,0 90,0 90,0 100,0 P max. 24,1 25,8 28,8 31,8 25,6 28,8 31,8 34,1 37,4 40,5 43,8 50,2 56,4 62,8 V max. 22,7 22,7 27,5 30,0 22,7 27,5 30,0 32,2 37,5 37,5 43,3 43,3 51,7 58,0 W max. 27,0 27,0 34,0 38,0 27,0 34,0 38,8 40,5 47,5 47,0 54,0 73,0 64,5 73,0 **Add contact arrangement number (see pages 5-11) *For socket inserts substitute S for P 1)maximum cable diameter 14 LS Subject to changes Straight Plugs / 90° Right Angle Plugs MS3106R / CA3106R The MS3106R straight plug has a shorter lightweight endbell than MS3106E and F. It contains an O ring seal under the coupling nut. MS3106R plugs mate with 3100 and 3102 receptacles and 3101 plugs. If crimp version is required please order CA3106R...F80 or CA3106R...183 Part Number Pin Insert MS3106R10SL-**P MS3106R12S-**P MS3106R14S-**P MS3106R16S-**R MS3106R12-**P MS3106R14-**P MS3106R16-**P MS3106R18-**P MS3106R20-**P MS3106R22-**P MS3106R24-**P MS3106R28-**P MS3106R32-**P MS3106R36-**P A L max. 40,0 40,0 45,0 45,0 55,0 55,0 55,0 60,0 60,0 60,0 60,0 70,0 70,0 90,0 5/8-24NEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1 -20UNEF-2B 3/4-20U EF-2B 7/820UNEF2B 1 -20UNEF-2B 1-1/8-18NEF-2B 1-1/4-18 EF-2B 1-3/8-18NEF-2B 1-1/2-18 EF-28 1-3/4-18NS-2B 2 -18NS-2B 2-1/4-16UN-2B M max. 24,4 24,4 29.0 31,5 24,4 29,0 31,5 36,5 39,7 39,7 47,4 47,4 55,9 60,8 P max. 24,1 25,8 28,8 31,8 25,8 28,8 31,8 34,1 37,4 40,5 43,6 50,2 56,4 62,8 **Add contact arrangement number (see pages 5-11) *For socket inserts substitute S for P MS3108E / CA3108E MS3108R / CA3108R MS3108R 90° right angle plugs mate with 3100 and 3102 receptacles and 3101 plugs. The 3108R has an O ring seal under the coupling nut. If no O ring is required the order reference is MS3108E. If crimp version is required please order CA3108E...F80 (without O ring), CA3108E...F183 (withot O ring) or CA3108R...F80 (with O ring), CA3108R...F183 (with O ring) Part Number Pin Insert MS3108R10SL-**P MS3108R12S-**P MS3108R14S-**P MS3108R16S-**R MS3108R12-**P MS3108R14-**P MS3108R16-**P MS3108R18-**P MS3108R20-**P MS3108R22-**P MS3108R24-**P MS3108R26-**P MS3108R32-**P MS3108R36-**P A 5/8-25NEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1 -20UNEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1 -20UNEF-2B 1-1/8-18NEF-2B 1-1/4-18NEF-2B 1-3/8-18NEF-2B 1-1/2-18NEF-2B 1-3/4-18NS-2B 2 -18NS-2B 2-1/4-16UN-2B Note: MS3108R is without cable clamp. If it is required with cable clamp please order the clamp separately. E1) max. 6,5 6,5 9,0 11,0 6,5 9,0 11,0 14,2 15,8 15,8 21,4 21,4 26,7 31,7 P max. 24,1 25,8 28,8 31,8 25,8 28,8 31,8 34,1 37,4 40,5 43,8 50,2 56,4 62,8 **Add contact arrangement number (see pages 5-11) *For socket inserts substitute S for P 15 1) R max. 22,7 22,7 27,5 30,0 22,7 27,5 30,0 32,2 37,5 37,5 43,3 43,3 51,7 58,0 maximum cable diameter V max. 42,0 42,0 42,0 45,0 54,0 35,7 45,0 53,0 53,0 53,0 58,0 58,0 66,0 69,0 Y max. 45,0 45,0 47,0 48,0 54,0 55,0 57,0 58,0 61,0 61,0 66,0 66,0 72,0 75,0 Straight Plugs - F Type / Cable Connecting Plug - F Type CA3106F CA3106F is a straight plug with external thread, however without cable clamp and O ring seal. Crimp and solder versions are available (please indicate ...F80 ore ...F183). CA3106F mate with 3100, 3101 and 3102 shell styles. Part Number Pin Insert CA3106F10SL-** CA3106F12S-**P CA3106lF14S-**P CA3106F16S-**P CA3106F12-**P CA3106F14-**P CA3106F16-**P CA3106F18-**P CA3106F20-**P CA3106F22-**P CA31.06F24-**P CA3106F28-**P CA3106F32-**P CA3106F36-**P A Thread C Thread 5/8-243 EF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1 -20UNEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1 -20UNEF-2B 1-1/8-18NEF2B 1-1/4-18NEF-2B 1-3/8-18NEF-2B 1-1/2-18NEF-2B 1-3/4-18NS-2B 2 -18NS-2B 2-1/4-16UN-2B 5/8-24 EF-2A 5/8-24NEF2A 3/4-20UNEF 7/8-20UNEF-2A 5/8-24NEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1 -20UNEF-2A 1-3/16-18NEF-2A 1-3/16-18NEF-2A 1-7/16-18NEF-2A 1-7/16-18NEF-2A 1-3/4-18NS-2A 2 -18NS-2A E max. 50,0 50,0 50,0 50,0 60,0 60,0 60,0 60,0 60,0 60,0 65,0 65,0 65,0 80,0 F max. 24,1 25,8 28,8 31,8 25,8 28,8 31,8 34,1 37,4 40,5 43,8 50,2 56,4 62,8 J min. 8,2 8,2 11,1 14,3 8,2 11,1 14,3 16,7 19,8 19,8 25,4 27,0 32,5 35,7 H min. 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 11,0 11,8 **Add contact arrangement number (see pages 5-11) *For socket inserts substitute S for P CA3101F CA3101F is a cable connecting plug with threaded endbell. Crimp and solder versions are available (please indicate ...F80 ore ...F183). CA3101F mate with 3106 and 3108 shell styles. Part Number Pin Insert CA3101F10SL-**P CA3101F12S-**P CA3101F14S-**P CA3101F16S-**P CA3101F12-**P CA3101F14-**P CA3101F16-**P CA3101F18-**P CA3101F20-**P CA3101F22-**P CA3101F24-**P CA3101F28-**P CA3101F32-**P CA3101F36-**P A Thread C Thread 5/8-24NEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1 -20UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1 -20UNEF-2A 1-1/8-18 EF-2A 1-1/4-18NEF-2A 1-3/8-18NEF-2A 1-1/2-18NEF-2A 1-3/4-18NS-2A 2 -18NS-2A 2-1/4-16UN-2A 5/8-24NEF-2A 5/8-24NEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 5/8-24NEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1 -20UNEF-2A 1-3/16-18NEF-2A 1-3/16-18NEF-2A 1-7/16-18NEF-2A 1-7/16-18NEF-2A 1-3/4-18NS-2A 2 -18NS-2A B min. 9,5 9,5, 9,5 9,5 15,8 15,8 15,8 15,8 15,8 15,8 15,8 15,8 15,8 15,8 H min. 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 11,0 11,8 G max. 16,2 19,3 22,5 25,6 19,3 22,5 25,6 28,8 32,0 35,2 38,4 44,8 51,2 57,5 K ±0,7 3,0 3,0 3,0 3,0 3,0 3,0 3,0 3,9 3,9 3,9 3,9 3,9 3,9 3,9 L max. 45,0 45,0 45,0 45,0 57,0 57,0 57,0 57,0 57,0 57,0 57,0 62,0 62,0 62,0 M +0,4 14,2 14,2 14,2 14,2 19,0 19,0 19,0 19,0 19,0 19,0 20,6 20,6 22,2 22,2 J∅ min. 8,2 8,2 11,1 14,3 8,2 11,1 14,3 16,7 19,8 19,8 25,4 27,0 32,5 35,7 S max. 21,8 25,0 28,2 31,4 25,0 29,2 31,4 34,5 37,6 41,0 43,8 50,5 57,9 53,2 **Add contact arrangement number (see pages 5-11) *For socket inserts substitute S for P 16 LS Subject to changes Straight Plugs with Shrink Boot Adapter / Through Bulkheads CA3106-DN CA3106-DN is a straight plug with endbell for shrink boot adapters. Crimp and solder versions are available (please indicate ...F80 ore ...F183). CA3106-DN mate with 3100, 3101 and 3102 shell styles. Part Number Pin Insert CA3106E10SL--**-P-DN CA3105E12S-**-P-DN CA3106E14S-**-P-DN CA3106E16S-**-P-DN CA3106E12-**-P-DN CA3106E14-**-P-DN CA3106E16-**-P-DN CA3106E18-**-P-DN CA3106E20-**-P-DN CA3106E22-**-P-DN CA3106E24-**-P-DN CA3106E28-**-P-DN CA3106E32-**-P-DN CA3106E36-**-P-DN A Thread 5/8-24NEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1 -20UNEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1 -20UNEF-2B 1-1/8-18NEF-2B 1-1/4-18NEF-2B 1-3/8-18NEF-2B 1-1/2-16NEF-2B 1-3/4-18NS-2B 2 -18NS-2B 2-1/4-16UN-2B B min. 7,7 7,9 10,6 13,5 7,9 10,6 13,5 14,6 18,5 20,8 24,6 27,0 33,3 38,5 C max. 13,2 13,2 17,0 21,9 13,2 17,0 21,9 21,9 26,6 26,2 34,5 34,5 43,6 43,6 D ±0,2 15,5 15,5 19,1 23,9 15,5 19,1 23,9 23,9 29,6 29,6 37,8 37,8 47,8 47,8 E ±0,2 17,0 17,8 19,1 23,9 17,8 20,1 23,5 26,5 30,2 33,6 36,1 41,4 48,6 54,8 F ±0,5 11,7 11.8 11,7 11,5 11,7 11,7 11,5 12,7 12,7 12,7 12,7 12,7 15,2 15,2 L max. 11,7 5ß.ß 50,0 50,0 50,0 60,0 60,0 60,0 65,0 65,0 65,0 65,0 70,0 80,0 P max. 50,0 25,6 28,6 31,8 25,6 28,6 31,8 34,1 37,3 40,5 43,8 50,0 56,3 62,7 **Add contact arrangement number (see pages 5-11) *For socket inserts substitute S for P TBF TBF is a through-bulkhead which mates with 3106 and 3108 plugs. Part Number Pin and Socket Insert A Thread B min. L max. M +0,4 R ±0,1 S ±0,3 TBF10SL-**PS TBF12S-**PS TBF14S-**PS TBF16S-**PS TBF12-**PS TBF14-**PS TBF16-**PS TBF18-**PS TBF20-**PS TBF22-**PS TBF24-**PS TBF28-**PS TBF32-**PS TBF36-**PS 5/8-24NEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1 -20UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1 -20UNEF-2A 1-1/8-18NEF-2A 1-1/4-18NEF-2A 1-3/8-18NEF-2A 1-1/2-18NEF-2A 1-3/4-18NS-2A 2 -18NS-2A 2-1/4-16UN-2A 9,5 9,5 9,5 9,5 15,8 15,8 15,8 15,8 15,8 15,8 15,8 15,8 15,8 15,8 40,1 40,1 40,1 40,1 54,4 54,4 54,4 54,5 54,5 54,5 54,5 54,5 54,5 54,5 14,2 14,2 14,2 14,2 19,0 19,0 19,0 19,0 19,0 19,0 20,5 20,6 22,2 22,2 18,2 20,6 23,0 24,6 20,6 23,0 24,6 27,0 29,4 31,8 34,9 39,7 44,5 49,2 25,4 28,0 30,0 32,5 28,0 30,0 32,5 35,0 38,0 41,0 44,5 50,8 57,0 63,5 **Add contact arrangement number (see pages 5-11) *For socket inserts substitute S for P 17 T +0,2 -0,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,7 3,7 4,4 4,4 EA / EB Moisture and weatherproof CA06EA Straight plug with gland nut sealing adapter and cable clamp. These plugs for jacketed cables incorporate an adapter for sealing and cable strain relief. A cable clamp is provided for additional support. CA06EA is completely moisture and weatherproof by means of a grommet around the cable and O rings under the coupling nut and where the adapter joins the barrel. Additional sealing is provided by the resilient inserts. Solder and crimp versions are available, please add ...F80 or ...F183. CA06EA mates with 3100, 3101 and 3102 shell styles. Part Number Pin Insert * CA06EA10SL-**P CA06EA12S-**P CA06EA14S--**P CA6EA16-S-**P CA06EA12-**P CA06EA14-**P CA06EA16-**P CA06EA1B-**P CA06EA20-**P CA06EA22-**P CA06EA24-**P CA06EA28-**P CA06EA32-**P CA06EA36-**P A Thread 5/8-24NEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1 -20UNEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1 -20UNEF-2B 1-1/8-18NEF-2B 1-1/4-18NEF-2B 1-3/8-18NEF-2B 1-1/2-18NEF-2B 1-3/4-18NS-2B 2 -18NS-2B 2-1/4-16UN-2B E cable dia. max. 8,0 8,0 11,2 13,5 8,0 11,2 13,5 15,9 19,1 19,1 23,9 23,9 31,8 34,9 min. 3,3 3,3 5,3 8,1 3,3 5,3 8,1 10,9 11,9 11,9 17,0 17,0 24,4 27,4 L max. 99,0 99,0 102,0 102,0 108,0 110,0 112,0 112,0 112,0 112,00 115,0 115,0 120,0 120,0 M max. 20.2 21,2 24,2 27,2 21,2 24,2 27,2 32,2 35,2 37,2 41,2 47,2 53,2 59,2 W max. 27,0 27,0 34,0 38,0 27,0 34,0 38,0 40,5 47,5 47,5 54,0 54,0 54,5 73,0 P max. 24,1 25,8 28,8 31,8 25,8 28,8 31,8 34,1 37,4 40,5 43,8 50,2 56,4 62,8 L max. 85,0 85,0 87,0 87,0 93,0 95,0 97.0 97.0 97,0 97,0 98,0 98,0 100,0 100,0 M max. 20,2 21,2 24,2 27,2 21,2 24,2 27,2 32,2 35,2 37,2 41,2 47,2 53,2 59,2 P max. 24,1 25,8 28,8 31,8 25,8 28,8 31,8 34,1 37,4 40,5 43,8 50,2 56,4 62,8 T -0,4 16,2 16,2 20,2 23,2 16,2 20,2 23,4 27,2 31,2 32,2 37,2 41,2 46,2 52,2 T -0,4 16,2 16,2 20,2 23,2 16,2 20,2 23,2 27,2 31,2 32,2 37,2 41,2 46,2 52,2 **Add contact arrangement number (see pages 5-11) *For socket inserts substitute S for P CA06EB Straight plug with adapter and gland nut. These plugs for jacketed cables incorporate an adapter for sealing and cable strain relief. Instead of a cable clamp a gland nut is supplied at the back of the adapter. An additional support with a Kellems strain relief grip can also be easily adapted to the CA06EB. For complete information on the Kellems grip please consult factory. CA06EB mates with 3100, 3101 and 3102 shell styles. Part Number Pin Insert* CA06EB10SL-**P CA06B12S-**P CA06EB14S-**P CA06EB16S-**P CA06EB12-**P CA06EB14-**P CA06EB16-**P CA06EB18-**P CA06EB20-**P CA06EB22-**P CA06EB24-**P CA06EB28-**P CA06EB32-**P CA06EB36-**P A Thread 5/8-24NEF-2B 3/4-20UNEF-2B 7/8-20UNEF 1 -20UNEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1 -20UNEF-2B 1-1/8-18NEF-2B 1-1/4-18NEF-2B 1-3/8-18NEF-2B 1-1/2-18NEF-2B 1-3/4-18NS-2B 2 -18NS-2B 2-1/4-16UN-2B E cable dia. max. 8,0 8,0 11,2 13,5 8,0 11,2 13,5 15,9 18,1 19,1 23,9 23,9 31,8 34,9 min 3,3 3,3 5,3 8,1 3,3 5,3 6,1 10,9 11,9 11,9 17,0 17,0 24,4 27,4 **Add contact arrangement number (see pages 5-11) *For socket inserts substitute S for P 18 LS Subject to changes Accessories Cable Clamp without Bushing Cable clamp with or without bushing. To order bushing, add „with bushing“ after the part number. For example: MS3057-10A with bushing. Part No. Shell Size A B max. E max. L max. R max. MS3057-4A MS3057-6A MS3057-8A MS3057-10A MS3057-12A MS3057-16A MS3057-20A MS3057-24A 10S, 12S, 12 14S, 14 16S, 16 18 20, 22 24, 26 32 36 5/8-24NEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1 -20UNEF-2B 1-3/16-18NEF-2B 1-7/16-18NEF-2B 1-3/4-18NS-2B 2 -18NS-2B 10,5 10,5 10,5 10,5 10,5 10,5 12,0 13,7 7,9 11,1 14,2 15,8 19,0 23,7 31,8 34,6 20,8 22,4 24,0 24,0 24,0 26,4 28,0 29,6 22,5 27,4 29,8 32,2 37,4 43,5 51,7 57,8 Shell Weight gr 13,2 18,6 23,6 27,3 37,2 56,3 83,9 109,8 Telescoping Bushing Telescoping gland bushings (used with cable clamp MS3057A) keep dirt, oil and moisture out of endbell. Taping or wrapping wires is eliminated since bushing protects wires going through clamp. Combinations of bushings may be used to decrease cable entry diameter to improve sealing. Material is polychloroprene (MS). Part No. Shell Size 812-8552-000 012-8554-000 012-0218-000 012-0219-000 012-0220-000 012-8555-000 10SL, 12, 12S 14, 14S 16, 16S 18 20, 22 24, 28 C max. 10,0 12,8 18,9 22,1 27,0 27,0 L max. 70,4 67,4 63,9 60,6 57,4 57,4 R -0,3 6,7 9,2 11,2 14,4 16,0 16,78 S -0,3 8,1 11,0 14,2 15,8 18,9 21,3 Part No. 012-8556-000 012-8557-000 012-8558-000 012-8556-000 012-0223-000 Shell Size 32 36 C max. 33,5 33,05 40,5 40,5 47,0 L max. 54,4 54,4 51,4 51,4 48,4 R -0,3 21,6 21,6 26,9 26,9 31,9 S -0,3 23,7 26,6 31,6 31,6 34,8 B ±0,3 31,8 34,9 39,7 44,5 49,2 C ±0,2 34,8 38,0 44,3 50,7 57,0 D +0,2 4,2 4,2 5,2 5,2 5,2 Sealing Gasket These sealing gaskets made of neoprene are used with flanged receptacles for seling between the shell and the flange. Part No. 075-8512-000 075-8513-000 075-8514-000 075-8515-000 075-8516-000 075-8517-000 19 MS shell size 10SL 12S, 12 14S, 14 16S, 16 18 20 A ±0,1 25,4 28,0 30,0 32,5 35,0 38,0 B ±0,3 18,2 20,6 23,0 24,6 27,0 29,4 C ±0,2 15,7 18,9 22,1 25,3 28,4 31,6 D +0,2 4,2 4,2 3,2 4,2 4,2 4,2 Part No. 075-8518-000 075-8519-000 075-8520-000 075-8521-000 075-8522-000 MS shell size 22 24 28 32 36 A ±0,1 41,0 44,5 50,8 57,0 64,5 Accessories Plastic protective caps Material: Colour: Part Number MS3100 3101 3102 025-0460-000 025-0477-000 025-0478-000 025-0462-000 025-0479-000 025-0463-000 025-0480-000 025-0498-000 025-0484-000 025-0507-000 025-0467-000 025-0468-000 025-0469-000 025-0486-000 025-0487-000 025-0510-000 025-0488-000 025-0501-000 025-0489-000 025-0502-000 025-0490-000 025-0503-000 10SL Polyethylene Red MS3106 3108 A max. 21,5 20,4 23,1 24,7 26,3 27,8 29,5 31,5 32,8 34,7 35,4 38,1 39,1 41,4 42,3 44,2 48,4 50,4 54,8 57,0 61,3 63,4 10 SL 12S, 12 12S, 12 14S, 14 14S, 14 16S, 16 16S, 16 18 18 20 20 22 22 24 24 28 28 32 32 36 36 B max. 17,8 12,5 14,6 17,8 14,6 17,8 14,6 17,8 14,6 17,8 17,8 17,8 14,6 17,8 14,6 17,8 14,6 17,8 14,6 17,8 14,6 17,8 C ±0,2 15,2 14,0 16,8 18,5 19,9 21,6 23,1 25,1 25,9 28,2 28,3 31,8 32,6 34,5 35,5 37,8 41,6 43,9 48,0 50,3 54,2 56,6 D max. 16,9 15,7 18,5 20,2 21,6 23,3 24,8 26,8 27,8 30,1 30,2 33,4 34,2 36,5 37,4 39,8 43,5 45,9 49,9 52,2 56,3 58,6 Dust caps for mating side of plugs only. Crimp pot adapters When cables and contacts of different sizes are used, we offer reduction sleeves. When using reduction sleeves please note that the insulation diameter of the wire has to be within the range of wires shown on page... If this dimension is not beeing kept it can not be assured that the connector styles 3100, 3101, 3106 and 3108 will be waterproof. Part Number 252-8501-000 252-8502-000 252-8503-000 252-8504-000 252-8553-000 252-8554-000 252-8555-000 252-8556-000 252-8557-000 252-8558-000 252-8559-000 252-8560-000 252-8561-000 252-8562-000 252-8563-000 252-8564-000 252-8565-000 20 LS suitable for contact size 8 8 100 15S/15, 16S/16 15S/15, 16S/16 15S/15, 16S/16 12, 25 8 4 0 4 0 0 500 100 500 500 reduced to wire size 1,5 mm2 AWG12 6 mm2 0,5 mm2 AWG 22/24 AWG 20 AWG 16, 1,5mm2 6 mm2 AWG 6 AWG 2 16 mm2 50 mm2 1 16 mm2 AWG 12, 2,5 mm2 35 mm2 25 mm2 ØA ca. 4,4 4,4 4,6 1,7 1,6 1,6 2,4 4,4 7,0 11,3 7,0 11,3 11,3 10,5 4,6 10,5 10,5 ØΒ ca. 1,75 2,5 3,4 1,05 0,9 1,15 1,75 3,4 5,65 9,05 6,2 10,6 9,9 6,2 2,4 9,2 7,6 ØC ca. 6,4 6,4 6,4 2,75 2,65 2,65 3,7 6,4 8,7 13,1 8,7 13,1 13,1 13,1 6,4 13,1 13,1 ØC ca. 2,75 4,1 4,0 1,8 1,7 1,9 2,75 4,8 7,4 11,7 7,4 11,7 11,7 8,2 4,0 11,3 9,6 G ca. 10,5 10,5 10,5 6,0 6,0 6,0 6,0 10,5 10,5 14,5 10,5 14,5 14,5 14,5 10,5 14,5 14,5 Subject to changes Accessories MS25042 CA17530 CA19741 Metal protective caps These externally threaded caps are used to protect 3106 and 3108 plugs. The material is aluminum alloy. The protective caps are furnished with a sash chain. They are also available with a bead chain or less chain. MS Part Number with Sash chain ITT Cannon Part Number with Sash chain MS25042-10D MS25042-12D MS25042-14D MS25042-16D MS25042-18D MS25042-20D MS25042-20D MS25042-22D MS25042-24D MS25042-28D MS24042-32S MS25042-36D CA17530-5101 CA17530-5102 CA17530-5103 CA17530-5104 CA17530-51005 CA17530-5106 CA17530.5106 CA17530-5107 CA17530-5108 CA17530-5109 CA17530-5110 CA17530-5111 ITT Cannon Part Number without Sash Chain CA19741-10 CA19741-12 CA19741-14 CA19741-16 CA19741-18 CA19741-20 CA19741-20 CA19741-22 CA19741-24 CA19741-28 CA19741-32 CA19741-36 Shell Size A B min. H +0,2 F max. D max. G max. 10SL 12S, 12 14S, 14 16S, 16 18 20 20 22 24 28 32 36 5/8-24NEF-2A 3/4-20U EF-2A 7/8-20UNEF-2A 1 -20UNEF-2A 1-1/8-18NEF-2A 1-1/4-18NEF-2A 1-1/4-18NEF-2A 1-3/8-18NEF-2A 1-1/2-18NEF-2A 1-3/4-18NS-2A 2 -18NS-2A 2-1/4-16UN-2A 7,7 12,5 12,5 12,5 12,5 12,5 12,5 12,5 12,5 12,5 12,5 12,5 3,9 3,9 4,9 3,9 3,9 4,7 4,7 4,7 4,7 4,7 5,5 5,5 16,7 19,8 23,0 26,2 21,0 32,5 32,5 35,7 38,9 45,2 51,6 57,9 16,3 21,0 21,0 21,0 29,4 21,0 21,0 21,0 21,0 21,0 21,0 21,0 107,0 120,0 120,0 120,0 120,0 124,0 134,0 134,0 147,0 207.0 207,0 207,0 Shell Weight with Sash without chain Sash chain gr. gr. 6,4 3,2 8,7 4,2 9,2 5,5 10,0 6,0 13,2 9,2 15,5 12,0 15,5 12,0 16,5 13,3 19,2 14,5 25,5 21,0 31,0 28,0 36,05 33,0 MS25043 CA2209 CA2322 Metal protective caps These internally threaded caps are used to protect 3100, 3101 and 3102 receptacless. The material is aluminum alloy. The protective caps are furnished with or without a sash chain. MS ITT Cannon ITT Cannon Part Number Part Number Part Number with Sash chain with Sash chain without Sash chain MS25043-10D CA2209-5101 CA2322-2 MS25043-12D CA2209-5102 CA2322-3 MS25043-14D CA2209-5103 CA2322-4 MS25043-16D CA2209-5104 CA2322-5 MS25043-18D CA2209-5105 CA2322-6 MS25043-20D CA2209-5106 CA2322-7 MS25043-22D CA2209-5107 CA2322-8 MS25043-24D CA2209-5108 CA2322-9 MS25043-28D CA2209-5109 CA2322-10 MS25043-32D CA2209-5110 CA2322-11 MS25043-36D CA2209-5111 CA2322-12 21 Shell Size A 10SL 12S, 12 14S, 14 16S, 16 18 20 22 24 28 32 36 5/8-24NEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1 -20UNEF-2B 1-1/8-18NEF-2B 1-1/4-18NEF-2B 1-3/8-18NEF-2B 1-1¶2-18NEF-2B 1-3/4-18NS-2B 2 -18NS-2B 2-1/4-16UN-2B B max. C max. D max. E +0,2 11,7 11,7 11,7 11,7 11,7 11,7 11,7 11,7 13,3 13,3 13,3 20,2 23,4 26,6 29,8 32,9 36,1 39,4 42,6 48,9 55,3 61,6 107,0 120,0 120,0 120,0 120,0 134,0 134,0 147,0 207,0 207,0 207,0 3,9 3,9 3,0 3,9 3,9 4,7 4,7 4,7 4,7 5,5 5,5 Shell Weight with Sash chain gr. 5,5 7,7 8,2 8,7 9,6 11,5 12,7 14,5 15,0 26,5 33,2 wifhout Sash chain gr. 4,1 5,0 5,5 6,5 7,7 9,2 10,5 8,2 13,2 21,0 27,5 Accessories Dummy Receptacle MS3105 The dummy receptacle holds 3106 or 3108 plugs when not in use. Material: Aluminum alloy, finish is olive drab chromate over cadmium plate. Part Number MS MS3105-10S MS3105-12S MS3105-14S MS3105-16S MS3105-12 MS31,05-14 MS3105-16MS3105-18 MS3105-20 MS3105-22 MS3105-24 MS3105-28 MS3105-32 MS3105-36 22 LS Fits Shell Size 10SL 12S 14S 16S 12 14 16 18 20 22 24 28 32 36 A Thread K max. L max. →N max. R S ±0,1 ±0,7 5/8-24NEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1 -20UNEF-2A 3/3-20UNEF-2A 7/8-20UNEF 1 -20UNEF-2A 1-1/8-18UNEF-2A 1-1/4-18UNEF-2A 1-3/8-18UNEF-2A 1-1/2-18UNEF-2A 1-3/4-18UNS-2A 2 -18UNS-2A 2-1/4-16UN-2A 2,4 2,4 2,4 2,4 2,4 2,4 2,4 3,0 3,0 3,0 3,0 3,0 4,3 4,3 17,2 17,2 17,9 17,2 22,0 22,0 22,0 22,5 22,5 22,5 24,1 24,1 27,0 27,0 11,9 14,7 17,9 21,0 14,7 17,9 21,0 24,2 27,4 30,6 33,7 39,3 45,7 51,2 18,2 20,6 23,0 24,6 20,6 23,0 24,6 27,0 29,4 31,8 34,9 39,7 44,5 49,2 25,4 28,7 30,1 32,5 28,7 30,0 32,5 34,9 38,0 41,3 44,4 50,8 57,1 63,4 T +0,2 -0,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,7 3,7 4,4 4,4 Shell Weight gr. 5,9 64, 7,7 9,1 7,3 9,1 10,0 14,1 15,0 16,8 21,8 25,4 37,2 44,9 Subject to changes Contacts and Tools Shell Size 10S, 12S 14S, 16S 12, 14 16 to 36 12, 14 16 to 36 16 to 36 Wire Size AWG metric 16S 15S 16 15 12 25 8 100 16 to 36 4 160 20 to 36 0 500 16 to 36 - 10 Contacts P S P S P S P S P S P P S P - Pin Part numbers for Crimp Contacts metric AWG 030-8586-000 030-8586-000 031-8555-000 031-8555-000 030-8587-000 030-8587-000 031-8556-000 031-8556-000 030-8588-000 030-8588-000 031-8557-000 031.8557-000 030-8590-000 030-8612-000 031-8559-000 031-8519-000 030-8591-000 030-8613-000 031-8560-000 031-8520-000 030-8592-000 030-8614-000 031-8561-000 030-8521-000 030-8585-000 031-8554-000 S - Socket Crimp Tools Electro-pump Part no. 46608.00000.020 or 46.00000.840 Accessories for hydraulic tools Hydraulic crimp head (12 to), part no. 4632.00000.601 to accept the crimp dies mentioned below for contacts AWG 8/100/60/4/160 and 0/500. High pressure hose, 2 m length, part no. 4604.0000.020. Crimp dies For hydraulic tool Contact size AWG 8 Metric 100/60 4 160 0 500 Guide pins To insert the socket contacts of size 15S/16S, 15/16/25 and 12, the Following guiding pins are to be used: 226-1017-000 226-1018-000 23 MS319,1A CIT-F80-12 CET-F80-12 MS3191A CIT-8 CET-8 CIT-4 CET-4 CIT-0 CET-0 CIT-F80-20 CET-F80-20 Hydraulic tool MS3191A Contact size AWG 16S/16 12 Metric 10 15S/15 25 100 160 500 Part no. CIT-F80-20 CIT-F80-16 CIT-F80-12 CIT-8 CIT-4 CIT-0 Extraction tools For contact extraction from the insulator For additional tools please consult factory. Part no. CET-580-16 Contact size AWG 16S/16 12 8 4 0 Hydraulic tool Foot operated, including safety valve Part no. 4601.51000.330 317-8531-000 317-8531-001 317-8532-000 317-8532-001 317-8533-000 317-8533-001 CIT-F80-16 Locators and Dies 600 094 600 093 600 092 600 091 600 216 600 216 317-8531-000 317-8531-001 317-8532-000 317-8532-000 317-8533-000S 317-8533-001 600 219 600 219 Insertion tools for contact insertion into the insulator Hydraulic tool Hand operated, including safety valve Part no. 4601.00000.330 Part no. Part Number for Tools (only for cimp contacts) Insertion Extraction Crimp CIET-F80-16 CET-F80-16 MS3191-A Metric 15S/15 25 Contact size AWG 16S/16 12 8 4 0 Metric 10 15S/15 25 100 160 500 Part no. CET-F80-16 CET-F80-16 CET-F80-12 CET-8 CET-4 CET-0 Wire Hole fillers Where contacts are not used, the contact cavities are t be closed by wire hole fillers. Contact size AWG 16S/16 12 8 4 0 Metric 10 15S/15 25 60/100 160 500 Wire Size Part no. Colour 20 16 12 8 4 0 225-1000-000 225-0017-000 225-0018-000 225-0019-000 225-8502-000 225-8503-000 red blue yellow white green black MS Product Safety Information THIS NOTE SHOULD BE READ IN CON-JUNCTION WITH THE PRODUCT DATA SHEET/CATALOGUE. FAILURE TO OB-SERVE THE ADVICE IN THIS INFORMATION SHEET AND THE OPERATING CONDITIONS SPECIFIED IN THE PRODUCT DATA SHEET/ CATALOGUE COULD RESULT IN HAZAR-DUOUS SITUATIONS. 1. MATERIAL CONTENT AND PHYSICAL FORM Electrical connectors do not usually contain hazardous materials. They contain conducting and non-conducting materials and can be divided into two groups. a) Printed circuit types and low cost audio types which employ all plastic insulators and casings. b) Rugged, Fire Barrier and High Reliability types with metal casings and either natural rubber, synthetic rubber, plastic or glass insulating materials. Contact materials vary with type of connector and also application and are usually manufactured from either copper, alloys, nickel, alumel, chromel or steel. In special applications, other alloys may be specified. 2. FIRE CHARACTERISTICS AND ELECTRIC SHOCK HAZARD There is no fire hazard when the connector is correctly wired and used within the specified parameters. Incorrect wiring or assembly of the connector or careless use of metal tools or conductive fluids, or transit damage to any of the component parts may cause electric shock or burns. Live circuits must be broken by separating mated connectors as this may cause arcing, ionisation and burning. Heat dissipation is greater at maximum resistance in a circuit. Hot spots may occur when resistance is raised locally by damage, e.g. cracked or deformed contacts, broken strangs of wire. Local overheating may also result from the use of the incorrect application tools or from poor quality soldering or slack screw terminals. Overheating may occur if the ratings in the Product Data Sheet/ Catalogue are exceeded and can cause breakdown of insulation and hence electric shock. If heating is allowed to continue it intensifies by further increasing the local resistance through loss of temper of spring contacts, formation of oxide film on contacts and wires, and leakage currents through carbonisation of insulation and tracking paths. Fire can then result in the presence of combustible materials and this may release noxious fumes. Overheating may not be visually apparent. Burns may result from touching overheated components. 3. HANDLING Care must be taken to avoid damage to any component parts of electrical connectors during installation and use. Although there are normally no sharp edges, care must be taken when handling certain components to avoid injury to fingers. 24 LS Electrical connectors may be damaged in transit to the customers, and damage may result in creation of hazards. Products should therefore be examined prior to installation/use and rejected if found to be damaged. Always use the correct application tools as specified in the Data Sheet/Catalogue. 4. DISPOSAL Incineration of certain materials may release noxious or even oxid fumes. For operation voltage please see appropriate national regulations 5. APPLICATION Connectors with exposed contacts should not be selected for use on the current supply side of an electrical circuit, because an electric shock could result from touching exposed contacts on an unmated connector. Voltages in excess of 30 V ac or 42.5 V dc are potentially hazardous and care should be taken to ensure that such voltages can not be transmitted in any way to exposed metal parts of the connector body. The connector and wiring should be checked, before making live, to have no damage to metal parts of insulators, no solder blobs, loose strands, conducting lubricants, swarf, or any other undersired conducting particles. Insulation resistance should be checked to make certain that no low resistance joints or spurious conducting path are existing between contacts and exposed metal parts of the connector body. Further the contact resistance of the connectors should be measured within the electrical circuit in order to identify high resistances which result in excessive connector heating. Do not permit untrained personnel to wire, assemble or tramper with connectors. IMPORTANT GENERAL INFORMATION. 1. Air and creepage paths/Operating voltage The admissible operating voltages depend on the individual applications and the valid national and other applicable safety regulations. For this reason the air and creepage path date are only reference values. Observe reduction of air and creepage paths due to PC board and/or harnessing. 2. Temperature All information given are temperature limits. The operation temperature depends on the individual application. 3. Other important information Cannon continuously endeavours to improve their products. Therefore, Cannon products may deviate from the description, technical data and shape as shown in this catalogue and data sheets. 4. Harnessing and Assembly Instructions If applicable, our special harnessing and/or assembly instruction has to be adhered to. This is provided at request. ITT Cannon manufactures the highest quality products available in the marketplace; however these products are intended to be used in accordance with the specifications in this catalog. Any use or application that deviates from stated operating specifications is not recommended and may be unsafe. No information and data contained in this catalog shall be construed to create any liability on the part of ITT Cannon. Any new issue of this catalog shall automatically invalidate and supersede any and all previous issues. A limited warranty applies to ITT Cannon products. Except for obligations assumed by ITT Cannon under this warranty, ITT Cannon shall not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether or not based on express or implied warranty, contract, negligence or strict liability arising in connection with the design, manufacture, sale, use or repair of the products. Product availability, prices and delivery dates are exclusively subject to our respective order confirmation form; the same applies to orders based on development samples delivered. This catalog is not be construed as an offer. It is intended merely as an invitation to make an offer. By this publication, ITT Cannon does not assume responsibility or any liability for any patent infringements or other rights of third parties which may result from its use. Reprinting this catalog is generally permitted, indicating the source. However, ITT Cannon's prior consent must be obtained in all cases. Cannon is a trademark of ITT Industries, Inc Subject to changes