CA3101E32-6PBF80

Datasheet for part number CA3101E32-6PBF80 Our Catalog Part Number: CA3101E32-6P-B-F80 Our Global Manufacturing Part Number: 121228-0006 Brand: Cannon Product Category: Circular Product Line: CA Bayonet Series: CA BAYONET Product Datasheet Bayonet Shell Style Endbell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Contacts installed Shielding Contact Rating at +20 °C (68 °F) (Size 15/15S/16/16S) Contact Rating at +20 °C (68 °F) (Size 25/12) Contact Rating at +20 °C (68 °F) (Size 60/100/8) Contact Rating at +20 °C (68 °F) (Size 160/4) Contact Resistance (Size 15/15S/16/16S) Contact Resistance (Size 25/12) Contact Resistance (Size 60/100/8) Contact Resistance (Size 160/4) Operating Voltage Insulator Resistance Test Voltage Air and Creepage Paths (Min) Ambient Temperature Safety Provisions Salt Spray Resistance Mating Cycles Sep. Force per Contact (Size 15/15S/16/16S) Sep. Force per Contact (Size 25/12) Sep. Force per Contact (Size 60/100/8) Sep. Force per Contact (Size 160/4) Gage Coupling Torque Connector with bayonet coupling Cable connecting plug Endbell with clamp and bushing Pin 32 32-6 2 contacts size 4, 3 contacts size 8, 2 contacts size 12, 16 contacts size 16 AWG Crimp Hard silver not assembled, packed separately no 22 A 41 A 74 A 135 A 6 mΩ 3 mΩ 1 mΩ 0,5 mΩ In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC 60364-4-41. Acc. To VG95319, part 2, test no. 5.12 and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ 1600 Vrms 1,1 mm Standard insulator material -55°/+125°C (-67/257°F) IP67 and IP68 (1 bar pressure after 12 hrs) acc. to DIN 40 050 500 hours salt spray resistant 500 min 1,0 N 1,5 N 3,0 N 4,0 N For infos on Gage please see catalog VG95234, part 1 Closing: 19 Nm max / Opening: 1,03 Nm min Specifications and dimensions subject to change. Page 1 of 2 Datasheet for part number CA3101E32-6PBF80 Our Catalog Part Number: CA3101E32-6P-B-F80 Our Global Manufacturing Part Number: 121228-0006 Brand: Cannon Product Category: Circular Product Line: CA Bayonet Series: CA BAYONET Product Datasheet Contact Retention (Size 15/15S/16/16S) Contact Retention (Size 25/12) Contact Retention (Size 60/100/8) Contact Retention (Size 160/4) Shell Material Shell Plating Insulator and Grommet Material Contact Material 35 N 55 N 80 N 90 N Aluminium alloy Olive drab chromate over cadmium plating (conductive) CR-Elastomere Copper alloy Harnessing Info: Contact Cross-Section See assembly instruction Harnessing Info: Insulator Diameter See assembly instruction Wire Stripping (Size 15/15S/16/16S) Wire Stripping (Size 25/12) Wire Stripping (Size 60/100/8) Wire Stripping (Size 160/4) General Info 6,2 mm 6,2 mm 11,8 mm 11,8 mm All tests in accordance with VG95319 and/or if applicable with VG95210 Specifications and dimensions subject to change. Page 2 of 2