CA3106E20-15SB02F0

Datasheet for part number CA3106E20-15SB02F0 Our Catalog Part Number: CA3106E20-15S-B-02-F0 Brand: Cannon Product Category: Circular Product Line: CA Bayonet Series: CA BAYONET Product Datasheet Bayonet Shell Style Endbell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Contacts included Shielding Contact Rating at +20 °C (68 °F) (Size 25/12) Contact Resistance (Size 25/12) Wire Cross Section Operating Voltage Insulator Resistance Test Voltage Air and Creepage Paths (Min) Ambient Temperature Safety Provisions Salt Spray Resistance Mating Cycles Sep. Force per Contact (Size 25/12) Gage Coupling Torque Contact Retention (Size 25/12) Shell Material Shell Plating Insulator and Grommet Material Contact Material Connector with bayonet coupling Plug, straight Endbell for heatshrinkable boots Socket 20 20-15 7 contacts size 12 AWG Crimp Hard silver no, delivery without contacts no 41 A 3 mΩ AWG 14/12 In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC 60364-4-41. Acc. To VG95319, part 2, test no. 5.12 and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ 2000 Vrms 1,1 mm Standard insulator material -55°/+125°C (-67/257°F) IP67 and IP68 (1 bar pressure after 12 hrs) acc. to DIN 40 050 500 hours salt spray resistant 500 min 1,5 N For infos on Gage please see catalog VG95234, part 1 Closing: 9 Nm max / Opening: 0,7 Nm min 55 N Aluminium alloy Olive drab chromate over cadmium plating (conductive) CR-Elastomere Copper alloy Harnessing Info: Contact Cross-Section See assembly instruction Harnessing Info: Insulator Diameter See assembly instruction Wire Stripping (Size 25/12) General Info 6,2 mm All tests in accordance with VG95319 and/or if applicable with VG95210 Specifications and dimensions subject to change. Page 1 of 1