CA3108E28-15SXBF80

Datasheet for part number CA3106E28-22P-15 Our Catalog Part Number: CA3106E28-22P-15 Brand: Cannon Product Category: Circular Product Line: MIL-DTL 5015 Series I Series: MIL-C-5015 Product Datasheet Thread Shell Style Endbell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Contacts installed Shielding Contact Rating at +20 °C (68 °F) (Size 15/15S/16/16S) Contact Rating at +20 °C (68 °F) (Size 160/4) Contact Resistance (Size 15/15S/16/16S) Contact Resistance (Size 160/4) Operating Voltage Insulator Resistance Test Voltage Air and Creepage Paths (Min) Ambient Temperature Safety Provisions Salt Spray Resistance Mating Cycles Sep. Force per Contact (Size 15/15S/16/16S) Sep. Force per Contact (Size 160/4) Gage Coupling Torque Contact Retention (Size 15/15S/16/16S) Contact Retention (Size 160/4) Shell Material Shell Plating Insulator and Gromet Material Contact Material Connector with threaded coupling Plug, straight Shielded connector with endbell for shielded braids and heat shrinkable boots Pin 28 28-22 3 contacts size 4, 3 contacts size 16 AWG Crimp Hard silver not assembled, packed separately yes 22 A 135 A 6 mΩ 0,5 mΩ In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC 60364-4-41. Acc. To VG95319, part 2, test no. 5.12 and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ 2500 Vrms 2,8 mm Standard insulator material -55°/+125°C (-67/257°F) IP65 acc. to DIN 40 050 500 hours salt spray resistant 500 min 1,0 N 4,0 N For infos on Gage please see catalog VG95234, part 1 Closing: 17 Nm max / Opening: 0,92 Nm min 35 N 90 N Aluminium alloy Olive drab chromate coating over cadmium plating Neoprene Copper alloy Harnessing Info: Contact Cross-Section See assembly instruction Harnessing Info: Insulator Diameter See assembly instruction Wire Stripping (Size 15/15S/16/16S) Wire Stripping (Size 160/4) General Info SC_P_Code 6,2 mm 11,8 mm All tests in accordance with VG95319 and/or if applicable with VG95210 CA Specifications and dimensions subject to change. Page 1 of 1