CCM02-1N0-35

CCM02 MK I CCM02 MK I is a connector with landing contacts. Features • Available with 8 through hole contacts. • 100,000 card insertion cycles. • The contacts do not touch the card until it is almost fully inserted a minimal wiping action removes any non-conductive material. • The connector has been designed to give a positive feel as the card is fully inserted. • For added reliability, the integrated card end-travel switch (which is normally open) is sealed against dust and grit. Construction Contacts Plating Moldings Mechanical Data Number of Contacts Mechanical life Card insertion force Card extraction force Contact force Vibration Shock 8 100,000 cycles min 10 N max 1 N min / 10 N max 0.15 N min / 0.35 N max Frequency 10 to 500 Hz. Acceleration 50m/s2 Duration 6 hours - amplitude 0,35 mm Max electrical discontinuity 1µs Peak value 500 m/s2 – Duration 11 ms 3 shocks in each direction of each axis Max electrical discontinuity 1 µs Copper alloy Contact area : Gold over Nickel Terminals : Tin lead (2µ min) Thermoplastic UL 94V-0 rated Contact Electrical Data Insulation resistance Resistance Current rating Dielectric strength Switch Electrical Data Card detection switch Contact resistance Dielectric strength Current rating Maximum power Environmental Data Operating temperature Soldering temperature Damp heat Salt mist Card detection switch Ordering Code Part Number CCM02-1N0-3 CCM02-1N0-32 CCM02-1N0-35 Packaging 30 per tray, 10 trays per box. Exception: CCM02-1NO-35, 20 per tray, 10 per box. Number of Contacts 8 8 8 with extended cover Packaging Multiple 300 300 200 -40°C to +85°C Wave: 260°C / 5 sec IEC 512 test number 11c (10 days) IEC 512 test number 11f (96 hours) Sealed IP 54 Normally open 100 mΩ max 250 Vrms min 1 mA min / 10 mA max 0.2 VA 1,000 MΩ min 100 mΩ max 10 µA min / 1 A max 750 Vrms min Dimensions are shown in mm Dimensions subject to change www.ittcannon.com 13 CCM02 MK I Dimensional Drawings CCM02-1NO-32 5,8 +0,1 4,3 0 3,1 0,6 x 0,3 40 24 9,05 38,1 0 ø 3,1-0,05 ø0,1 A B 2 REF B 51,5 55,55 2 REF 1,6 1 18,68 7,62 7,62 5,08 35,25 Card stop Dimensions are shown in mm Dimensions subject to change Marking : designation & date-code 6 PCB Layout CCM02-1NO-32 (8 contacts through hole) 5,8 (Component Side) 1 65 7,62 38,1 24 9,05 Drawings shown for reference only. For other part numbers please consult your local Cannon Customer Service Center. 1 5,08 14,5 1 7,62 7,62 18,68 51,5 (3x2,54) Unless otherwise stated, tolerances are ± 0,10 mm www.ittcannon.com 14 50,4 REF ø0,3 A B