CCM05-5776T50

CCM05 SD, MMC & miniSD For one of the most common card formats, we offer various reading options in a small and sturdy packaging. This includes the smaller standard of the miniSD, designed for the mobile communication needs. Features • Accept both MMC and SD card (except 5502) • Standard and reverse reading • Long or short cover • Smooth push push mechanism • Card detect and write protect switches • Front metal tab for better PCB tear-off resistance • Front cover retention for temper resistant card entrance • Low profile push push connectors (2.65 mm for SD, 2.10 mm for miniSD) Physical Data Contacts Contact finish (towards the card) Write protect contact Card detect contact Contact finish (towards the PCB) Metal cover Cover ground tails Molding Mechanical Data Number of contacts Operating life standard & reverse type Operating life push-push type Contact force (signal contact) Card insertion force Card withdrawal force Vibration Mechanical shock 7 (MMC), 9 (SD),10 (miniSD) ≥ 10,000 cycles ≥ 5,000 cycles 0.20 N min. 40 N max. 2 N min. According to IEC 512 part 4, test 6d. 10 to 500 Hz / 50m/s2 / 3 axis / 2 hours per axis No discontinuity > 1 µs Peak value 500 m/s2 11ms. 3 shock in each direction of each axis. No electrical discontinuity 1 µs. ≤ 5 Vdc ≤ 500 mA ≤ 100 milliohms ≥ 500 Vrms 1000 MΩ min. Phosphor bronze Gold over nickel Copper alloy / nickel overall finish Copper alloy / nickel overall finish Gold over nickel Copper alloy / nickel plated overall Gold plated over nickel High temp. Thermoplastic, UL 94V-0 Contact Electrical Data Voltage / ct Current / ct Contact resistance Voltage proof Insulation resistance Environmental Data Operating temperature Storage temperature Soldering temperature Moisture resistance -25°C / +85°C -40°C / +85°C 230°C / 5 sec according to MIL-STD-202F, method 208 40°C / 93% HR / 96 hours. According to MIL-STD-202F, method 103B, test condition B 48 hours according to IEC 512 test 11f Corrosion Ordering Code CCM05-5502 R901 CCM05-5761 R601 CCM05-5770 T48 CCM05-5772 T45 CCM05-5773 T50 CCM05-5775 T48 CCM05-5776 T50 CCM05-5777 T50 CCM05-5778 T45 Packaging MMC card 2 pegs short cover SD card & MMC stand off SD card & MMC 2 pegs with chamfer SD card & MMC 2 pegs push-push miniSD card SD card & MMC 2 pegs miniSD card push-push SD card & MMC 2 pegs short cover SD card 2 pegs reverse Please look at part number designation to determine packaging: T = Tray R = tape on reel - please contact Customer Service for quantity. Dimensions are shown in mm Specifications and dimensions subject to change www.ittcannon.com CCM05 SD, MMC & miniSD CCM05-5502 DETAIL A Card stop SEE DETAIL A 1 2,75 0,95 45?0' 0,35 30?0' 1,5 2 2,2 0 0,1 -0,1 3,05 0,2 1,25 0,8 0,8 1 (REF.) 11,1 (REF.) RECOMMENDED PC BOARD LAYOUT (Component side) 7,75 1,5 8,6 3,7 1,7 1 (REF.) 11,1 (REF.) (3,6 max includes solder tails) 3,45 0,3 0,4 7x 16,25 9,95 0,3 11,1 0,75 1 1 A 6x 2,54 1,3 Contact location according to MMCA specification 7,62 5,08 2,54 0 2,54 5,08 7,62 7x 0,2 1 1,8 1,55 A XX-XXX Date Code area Pick and place area ø4 A C7 C6 C5 C4 C3 C2 C1 20,32 24,2 26,2 8,6 1 7,5 5 2,5 0 2,5 5 7,5 2,9 2,6 2,2 11,1 1,8 10,9 1 ø 1,2 2x Pad Pad Grounding foot area 1x1 1 12,425 A 10,795 20,32 9,525 1 0,7 1 ø 1 ±0,02 2x 0,2 A Contact foot area 0,8 x 1 Plastic outline Prohibited area CCM05-5761 19,35 A-A 0,75 2,1 2,9 0,5 Card stop 0,65 0,4 0,2 1 0,2 45˚ ø 1,2 0,8 2,1 0,75 23,3 18,25 3,65 3,1 0,1 0 -0,1 ( Component side ) 6,55 7,4 5,6 3,55 2 1 1,7 0,5 10,3 2,6 SEE DETAIL SWITCH 5,3 2,3 1 1,9 2,2 4,6 4 Switch foot area 0,7 x 0,6 9,6 7,2 4,8 2,4 0 2,4 4,8 7,2 9,6 1,5 (9x) A Pick and place area ø4 2,4 11 12,34 C8 C7 C6 C5 C4 C3 C2 C1 C9 Pad 2,4 1,3 11,86 2,4 12,76 0,7 12,76 10,1 1 26 24,3 20,3 27,6 2,4 3,24 2,4 2,4 2,76 0,75 2,4 2,6 2,1 9,8 10,3 11,05 12,4 2,4 2,3 A Contact foot area 0,8 x 0,7 Grounding foot area 1,5 x 0,7 Date-code area 0,7 1,2 1,5 XXX Write protect "off" switch "open" DETAIL WRITE PROTECT SWITCH NO FOR SD CARD 0,5 max Write protect "on" switch "closed" Dimensions are shown in mm Specifications and dimensions subject to change www.ittcannon.com 1,7 Plastic outline Pad 13,34 12,85 0,5 11,15 11,5 12,86 12,35 13,56 1,9 12,2 10,5 12,475 8,15 1,55 1 CCM05 SD, MMC & miniSD CCM05-5770 / CCM05-5775 SEE DETAIL A CCM05-5775 2,8 2 DETAIL A SEE DETAIL A 2,8 0 0,1 -0,1 3,2 CCM05-5770 2 0,8 10x RECOMMENDED PC BOARD LAYOUT ( Component side ) Scale 2,5 2,05 1,5 0,7 1,7 14,4 6x 2,5 = 15 9,375 2,425 26,6 2,425 2,5 X 6 = 15 Card detection switch Logo Date code area Write protect Card detect indication 1,2 1,3 ø 1,1 ±0,05 2 13,25 14 11,5 ø1 11,5 28,8 24,3 25,8 26,5 21 ø 1,5 24,15 28 A A 1,5 ø 1,6 ±0,05 2 17,6 25 5 1,1 1,5 Plastic outline Ground pad 4x 2,8 21,5 CCM05-5777 (short cover) 24,15 1,5 0,85 2 0,85 ø1 21 ø 1,5 RECOMMENDED PC BOARD LAYOUT ( Component side ) 1,2 1,3 1,2 1,5 25,5 24,3 0,7 1,7 1 2,4 9,375 1 ø 1,6±0,05 2,4 2 26,6 21 16,5 17,7 #8 #7 #6 #5 0,9 2,05 #4 #3 #2 #1 #9 2,5 0,13 0,73 2,27 2,8 3,4 5,13 0,5 ø 1,1±0,05 Pattern prohibited area Ground pad 4x Outer dimension of connector 1,75 1,7 2,43 2,69 0,5 0,5 19 11,5 ±0,05 21±0,05 14,4 26,6 5,88 26,5 27,7 28,8 Dimensions are shown in mm Specifications and dimensions subject to change www.ittcannon.com 2,07 Card detect indication 1,5 14,5 Write protect 16,69 2,8 R1 2x CCM05 SD, MMC & miniSD CCM05-5778 (reverse) 24,15 ±0,1 12,78 0,85 1,6 RECOMMENDED PC BOARD LAYOUT (Component side) 0,12 Card detect 25,3 3,1 ø1,5 x2 28,3 8,35 6,4 2,35 Pattern prohibited area 0,9 (2,5x6) = 15 2,425 0,5 4,925 10,855 1,7 1,8 2,5 9,4 11,3 Pattern prohibited area 1,7 28,3 10,07 (2,5x6) = 15 2,5 10,85 3,5 1,8 1 Write protect 7,5 19,5 1,75 7,5 ø1,65±0,02 (2x) 2,5 13,5 2,2 3,4 14,75 0,3 19,5 13,1 1,5 1,5 2,05 Date code 11,2 25,3 27,8 32,5 Outer dimension of connector 0,7 24 30,9 Connector center line Card edge Connector center line 16 8,93 9,8 Detect/protect ground pad x2 Card center line CCM05-5772 (push push) RECOMMENDED PC BOARD LAYOUT (Component side) 0,85 24,1 0,7 15 2,5 2,425 2,5 1,08 1,7 10 9,375 1,65 2x 0 ø 1,4 -0,1 24,2 28,5 3,35 1,7 2,5 2x 1 1,2 15,3 0,95 0,5 0,21 0,29 0,5 1,2 29 R1 4x 1,7 2,43 0,69 15 (6x 2,5) 18,2 Pattern prohibited area 14,5 13 35 2,1 CARD CL 8,2 7,5 29,2 1 (over stroke) 5 (card eject stroke) CONNECTOR C/L Ground pad 2x 1,4 2,6 2,1 CARD C/L 12,1 ±0,05 14,2 22,2 14 14,9 2,5 ø1,5±0,05 13,65 24 Dimensions are shown in mm Specifications and dimensions subject to change www.ittcannon.com 5,7 24,2 ±0,05 3,3 2 13,9 1,2 24,3 2,33 23,7 2,8 Outer dimension of connector Pattern prohibited area #2 #1 #9 WP #8 #7 #6 #5 #4 0,8 #3 CD 2,5 9 1,5 5,5 Date-Code area 0,5 0,45 0,63 8,35 14 6,4 6,8 2,65 R11 CCM05 SD, MMC & miniSD CCM05-5773 (miniSD) 21,9 10,95 P 1,30 X 10 = 6,5 0,55 1,3 TYP. Housing center Card center 10,95 13 RECOMMENDED PC BOARD LAYOUT (Component side) 22,7 20,5 16,5 10,95 6,05 0,95 Housing center Card center 2 2,1 3,3 8 6,6 6,26 2,75 2 2,05 1,95 16,5 22,1 0,55 ø1,20,05 Ground pad 2x 2,75 6,25 2,4 0,45 13 20,5 1,1 1,4 0,5 #4 #11 #10 #3 #2 #1 #9 2,65 1,3 TYP. 10,95 6,5 P 1,3 X 10 = 13 21,9 0,7 0,7 2 Card detect 0,8 0,25 1,25 Logo Date code area #8 3,75 #5 #6 #7 Pattern prohibited area 13 Card Edge CCM05-5776 (push push) 24,65 19 2,1 9,9 1,5 Housing center 11,525 10,475 ±0,15 P 1,3 X 10 = 13 1,325 6,5 ±0,15 0,45 23,15 RECOMMENDED PC BOARD LAYOUT (Component side) P 1,3 X 10 = 13 10,475±0,05 6,5±0,05 1,3±0,05 0,4 1,45 0,1 1 Date Code 18,5 15,5 6,8 #8 #7 #6 #5 #4 #11 #1 #9 #2 #10 #3 15,5 0,25 0,15 15,5 Ground pad 2x 3 1,1 2 18,5 2 0,95 30 Pattern prohibited area 5 (card eject stroke) 1 (over stroke) 1,3 2,1 Card center 1,3 ±0,1 0,7 1,325 1,2 Card detect ø1,2 +0,1 0 2x 4 Housing center 60? 9,475 Card center 19 23,05 To learn more about our CCM05 SD & MMC product lines, please visit www.ittcannon.com Customer Support Locations France: +33.(0) 1.60.24.51.51 UK: +44.1256.311850 Dimensions are shown in mm Specifications and dimensions subject to change Germany: +49 (30) 43.9990 USA: 800.635.5936 Hong Kong: +852.2732.2720 www.ittcannon.com 4