C&K CG Series Single Pole Power Rocker Switches
Features/Benefits
• Bevelled frame • Illuminated versions available • Easy panel mount installation
Typical Applications
• • • • Computers and peripherals Small appliances Instrument panels Industrial controls
Specifications
CONTACT RATING: UL/CSA: 16 AMPS @ 125 VAC, 10 AMPS @ 250 VAC. VDE µ T85: 10 AMPS @ 250 VAC, 6 AMPS @ 250 VAC. ELECTRICAL LIFE: 10,000 make and break cycles at full load. INSULATION RESISTANCE: 108 Ω min. DIELECTRIC STRENGTH: 1,500 VRMS @ sea level.
Materials
HOUSING AND ACTUATOR: 6/6 nylon (UL94V-2), black, matte finish. ILLUMINATED ACTUATOR: Polycarbonate, matte finish. CENTER CONTACTS: Silver plated, copper alloy. END CONTACTS: Silver plated. ALL TERMINALS: Silver plated, copper alloy.
NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages 12 thru 14. For additional options not shown in catalog, consult Customer Service Center.
Switch Function CG101 SPDT On-None-On CG102 SPST On-None-Off CG103 SPDT On-Off-On CG105 SPDT Mom-Off-Mom CG12 * SPST On-None-Off Actuator Actuator Color J1 Rocker 2 (STD). Black J2 **Two-tone rocker 1 White J3 Illuminated rocker 3 Red R Red, illuminated A Amber, illuminated G Green, illuminated Mounting Style/Color S2 (STD.) Snap-in, black S1 Snap-in, white Termination 05 (STD.) .250” quick connect 07 Solder lug Actuator Marking (NONE) (STD.) No marking D ON-OFF H ”O l” - international ON-OFF P ”O -” international ON-OFF
Contact Rating QF (STD.) Silver Lamp Rating (NONE) (STD.) No lamp 7 125 VAC neon 8 250 VAC neon
* CG12 - for switches with both marking and illumination ** J2 - refer to table on page 14 for actuator options
Dimensions are shown: Inch (mm) Dimensions subject to change
12
www.ittcannon.com
C&K CG Series Single Pole Power Rocker Switches
SWITCH FUNCTION
SWITCH FUNCTION CONNECTED TERMINALS
NO. POLES
MODEL NO.
C&K marking on opposite side
C&K marking on opposite side
SCHEMATIC
CG101 CG102
SP
ON
NONE
ON N/A
ON
NONE
OFF
2-3
2-1
OR For Illuminated Version
CG103
ON
OFF
ON
OPEN
CG105
MOM
OFF
MOM
CG12 *
ON
NONE
OFF
* CG12 - for switches with both marking and illumination
ACTUATOR
J1 J3
ROCKER ILLUMINATED ROCKER
J2
TWO-TONE ROCKER
NOTE: J3 actuator available with CG102 switch function only.
NOTE: Available with CG102 switch function only.
Dimensions are shown: Inch (mm) Dimensions subject to change
13
www.ittcannon.com
C&K CG Series Single Pole Power Rocker Switches
ACTUATOR COLOR
OPTION CODE ACTUATOR COLOR (STD.) BLACK WHITE RED RED, ILLUMINATED AMBER, ILLUMINATED GREEN, ILLUMINATED OPTION CODE ACTUATOR COLOR BOTTOM RED BLACK WHITE WHTE RED
2 1 3 R A G
TOP
1 2 3 4 5
WHITE WHITE RED BLACK BLACK
J2 actuator only
MOUNTING STYLE/COLOR
S2 S1
(STD.) SNAP-IN, BLACK SNAP-IN, WHITE
PANEL MOUNTING
PANEL THICKNESS 0.030-0.049 (0,75-1,25) 0.049-0.079 (1,25-2,0) 0.079-0.118 (2,0-3,0)
“X” 1.087-.004 (27,6-0,1) 1.094-.004 (27,8-0,1) 1.102-.004 (28,0-0,1)
“Y” 0.543+.004 (13,8+0,1) 0.543+.004 (13,8+0,1) 0.543+.004 (13,8+0,1)
TERMINATION
05
(STD.) .250” QUICK CONNECT
07 SOLDER LUG
.886 (22,5) 1 2 3 .118 (3,0) R .049 (1,2)
.031 (0,8) .366 (9,3)
.250 (6,3) .535 (13,6)
R .039 (1,0)
Dimensions are shown: Inch (mm) Dimensions subject to change
14
www.ittcannon.com
C&K CG Series Single Pole Power Rocker Switches
ACTUATOR MARKING
NONE
(STD.) NO MARKING
D
ON-OFF
H
Ol
P O-
NOTE: Orientation of actuator marking and terminals.
CONTACT MATERIAL
OPTION CODE
CONTACT AND TERMINAL MATERIAL SILVER POWER
RATINGS 16 AMPS @ 125 VAC; 10 AMPS @ 250 VAC (UL/CSA) 10 AMPS @ 250 VAC (VDE) µ T85.
QF
(STD.)
LAMP RATING
(NONE) (STD.) NO LAMP 7 125 VAC 33kΩ NEON 8 250 VAC 150kΩ NEON
NOTE: Lamp rating for J3 actuator option.
Dimensions are shown: Inch (mm) Dimensions subject to change
15
www.ittcannon.com