CL12J93S205DQA7

C&K CL Series Single Pole Power Rocker Switches Features/Benefits • Illuminated versions available • Positive detent • Snap-in mounting Typical Applications • Floor care products • Power outlet strips • Small appliances ®C US Materials HOUSING AND ACTUATOR: 6/6 nylon (UL94V-2), black, matte finish. ILLUMINATED ACTUATOR: Polycarbonate, matte finish. CENTER CONTACTS: Silver plated, copper alloy. END CONTACTS: Silver plated. ALL TERMINALS: Silver plated, copper alloy. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Specifications CONTACT RATING: UL/CSA: 16 AMPS @ 125 VAC, 1/3 HP; 10 AMPS @ 250 VAC, 1/2 HP. ELECTRICAL LIFE: 10,000 make and break cycles at full load. INSULATION RESISTANCE: 108 Ω min. DIELECTRIC STRENGTH: 1,500 VRMS @ sea level. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages 16 thru 18. For additional options not shown in catalog, consult Customer Service Center. Switch CL101 CL102 CL12 * Function SPDT On-None-On SPST On-None-Off SPST On-None-Off Actuator J7 Rocker J9 Illuminated rocker Actuator Color 2 (STD.) Black 1 White 3 Red R Red, illuminated A Amber, illuminated G Green, illuminated Mounting Style/Color S2 (STD.) Snap-in, black S1 Snap-in, white Termination 05 (STD.) .250” quick connect Actuator Marking (NONE) (STD.) No marking D ON-OFF H ”O l” - international ON-OFF P ”O -” international ON-OFF Contact Rating QA (STD.) Silver Lamp Rating (NONE) (STD.) No lamp 7 125 VAC neon 8 250 VAC neon * CL12 - for switches with both marking and illumination Dimensions are shown: Inch (mm) Dimensions subject to change 16 www.ittcannon.com C&K CL Series Single Pole Power Rocker Switches SWITCH FUNCTION SWITCH FUNCTION CONNECTED TERMINALS NO. POLES MODEL NO. C&K marking on opposite side C&K marking on opposite side SCHEMATIC CL101 ON NONE ON N/A SP CL102 ON NONE OFF 2-3 2-1 OR For Illuminated Version CL12 * ON NONE OFF * CL12 - for switches with both marking and illumination ACTUATOR J7 J9 ROCKER ILLUMINATED ROCKER NOTE: J9 actuator available with CL102 switch function only. ACTUATOR COLOR OPTION CODE ACTUATOR COLOR (STD.) BLACK WHITE RED RED, ILLUMINATED AMBER, ILLUMINATED GREEN, ILLUMINATED 2 1 3 R A G Dimensions are shown: Inch (mm) Dimensions subject to change 17 www.ittcannon.com C&K CL Series Single Pole Power Rocker Switches MOUNTING STYLE/COLOR S2 S1 (STD.) SNAP-IN, BLACK SNAP-IN, WHITE PANEL MOUNTING PANEL THICKNESS 0.030-0.049 (0,75-1,25) 0.049-0.079 (1,25-2,0) 0.079-0.118 (2,0-3,0) “X” 1.126-.004 (28,6-0,1) 1.134-.004 (28,8-0,1) 1.150-.004 (29,2-0,1) “Y” 0.551+.004 (14,0+0,1) 0.551+.004 (14,0+0,1) 0.551+.004 (14,0+0,1) TERMINATION 05 (STD.) .250” QUICK CONNECT ACTUATOR MARKING NONE (STD.) NO MARKING D ON-OFF H Ol P O- NOTE: Orientation of actuator marking and terminals. Dimensions are shown: Inch (mm) Dimensions subject to change 18 www.ittcannon.com C&K CL Series Single Pole Power Rocker Switches CONTACT MATERIAL OPTION CODE CONTACT AND TERMINAL MATERIAL SILVER POWER RATINGS 16 AMPS @ 125 VAC; 1/3 HP; 10 AMPS @ 250 VAC, 1/2 HP (®C US) QA (STD.) LAMP RATING (NONE) NO LAMP 7 125 VAC 33kΩ NEON 8 250 VAC 150kΩ NEON NOTE: Lamp rating for J9 actuator option. Dimensions are shown: Inch (mm) Dimensions subject to change 19 www.ittcannon.com