DC-37S-1AFN-A191-A197

Cover headline Cover headline D-Subminiature Product Selection Guide D-Subminiature Connectors Key Markets & Applications Invented by Cannon engineers in 1952 for aircraft radio systems, the D-Subminiature was designed as a smaller, lightweight rectangular alternative to larger, heavier connectors of the time. Today, Cannon continues its legacy of innovation through highly engineered D-Sub connector styles, sizes, configurations and accessories. From rocket launchers and telecommunications, to avionics and high-speed rail, its performance, reliability and versatility have made this Cannon invention one of the most widely used connectors in the world. D*M, D*MM, D*MA with NM, NMB option connectors are used when non magnetic characteristics are required. Hermetic Military D connectors are designed to meet environmental conditions of extreme pressure differential. These high reliability D-Sub connectors are the finest quality and are qualified to MIL-DTL-24308. Non-Magnetic Series X X X X X D*H X X X MIL-DTL-243082 AWG 18 - 28 50, 200, 500 available up to AWG 20 500 no AWG 20 - 24 500 no 9, 15, 25, 37, 50, 15, 26, 44, 62, 78,104 (high density) and Combo D 9, 15, 25, 37, 50 9, 15, 25, 37, 50, 15, 26, 44, 62, 78,104 (high density) Dielectric Withstanding Voltage1 1000 VAC 750 VAC 1000 VAC Current Rating (Amps) 7.5 A max. 7.5 A max. 7.5 A max. 10 milli Ohm max. 15 milli Ohm max. -55°C/125°C -54°C/125°C 10 milli Ohm max. (Signal Contacts) -50°C/150°C 48 hrs 48 hrs 48 hrs copper alloy low carbon steel electro-deposited tin over cadmium over copper flash steel Space Military/Aerospace Medical/Food Processing Mass Transit Industrial Telecom Wire Gauge Range AWG Mating Cycles RoHS Compliant Layout Contact Resistance Space & Satellites Operating Temperature Salt Spray Test Resistance in Hours Shell Material Finish gold over copper X yellow chromate over cadmium or zinc Glass-filled Thermoplastic, UL 94V-0 compression glass Glass-filled Thermoplastic, UL 94V-0 Color Contact white or black machined n/a machined black machined Material copper alloy steel copper alloy gold over copper electro-deposited tin over cadmium over copper flash 1.27 μm gold over nickel Insulator Military Vehicles Finish Commercial Avionics X Contact Termination/Styles Crimp X Solder Pot X Straight Solder X Right Angled Solder X IDC (insulation displacement connection) Wire Wrap Coax X Fiber Optic X High Power X High Voltage X Press Fit Eyelet 1 At Sea Level 2 Qualified to MIL-DTL-24308/1, /2, /3, /4, /23 and /24 for Finish Suffix F and Z X X X X X X X D*MAM crimp connectors are designed according to MIL-DTL-24308. D*MM straight PCB connectors are designed according to MIL-DTL-24308. GD* connectors provide high-density and moisture protection. 2D connectors feature double the contact density in the same insert area. D*MA crimp connectors are designed according to MIL-DTL-24308 D*MAM D*MM GD* 2D D*MA X X X X X X X X X X X AWG 18 - 30 500 available Not Applicable 500 available AWG 20 500 no AWG 22 -2 6 500 available AWG 20 - 28 200, 500 available 9, 15, 25, 37, 50, 15, 26, 44, 62, 78,104 (high density) 9, 15, 25, 37, 50 9, 15, 25, 37, 50, 15, 26, 44, 62, 78,104 (high density) 19, 31, 52, 79, 100 9, 15, 25, 37, 50, 15, 26, 44, 62, 78,104 (high density) 1000 VAC 1000 VAC 1000 VAC 1000 VAC 1000 VAC 7.5 A max. 7.5 A max. 7.5 A max. (Standard Density) 5 A max. 2A max. (BR Series) 7.5 A max. 10 milli Ohm max. (Signal Contacts) -50°C/150°C 10 milli Ohm max. (Signal Contacts) -50°C/150°C 10 milli Ohm max. 9 milli Ohm max. 10 milli Ohm max. -65°C/150°C -55°C/125°C -55°C/125°C 48 hrs 48 hrs 48 hrs 48 hrs 48 hrs steel RoHS - Tin/Nickel yellow chromate over cadmium or zinc steel RoHS - Tin/Nickel yellow chromate over cadmium or zinc low carbon steel low carbon steel/brass yellow chromate over cadmium or zinc yellow chromate over cadmium steel RoHS - Tin/Nickel yellow chromate over cadmium or zinc Glass-filled Thermoplastic, UL 94V-0 Glass-filled Thermoplastic, UL 94V-0 Glass-filled Thermoplastic, UL 94V-0 glass filled nylon Glass-filled Thermoplastic, UL 94V-0 black machined black machined white or black machined black twist pin white machined copper alloy copper alloy copper alloy copper alloy copper alloy 1.27 μm gold over nickel 1.27 μm gold over nickel gold over nickel gold plate gold over nickel X X X X X X X X X X X X X X D*M straight PCB connectors are equivalent to MIL-DTL-24308 qualified versions (except for finishes). D*M A broad range of D-Sub connectors are available with stainless steel shells for corrosion resistance. D*NG pressfit connectors provide a low-cost alternative to traditional through hole solder contacts (straight only). Speedy D connectors terminate ribbon cables without stripping and without splicing. D*U is a low-cost, crimp type D-Subminiature series. X X Stainless Steel X X X X X Not Applicable 50, 200, 500 available AWG 18 - 30 50, 200, 500 yes 9, 15, 25, 37, 50 9, 15, 25, 37, 50, 15, 26, 44, 62, 78,104 (high density) and Combo D 9, 15, 25, 37, 50 9, 15, 25, 37 9, 15, 25, 37, 50 1000 VAC 1000 VDC 1200 VAC 780 VAC 1000 VAC 7.5 A max. 7.5 A max. 5.0 A at 25°C 3.5 A at 70°C 1.5 A max. 5.0 A max. 7.5 milli Ohm max. 10 milli Ohm max. 10 milli Ohm max. 15 milli Ohm max. 15 milli Ohm max. -55°C/125°C -55°C/125°C -55°C/125°C -55°C/125°C -55°C/125°C 48 hrs 48 hrs 20 hrs 20 hrs 20 hrs steel RoHS - Tin/Nickel yellow chromate over cadmium or zinc stainless steel steel steel passivated tin tin steel RoHS - Tin/Nickel yellow chromate over cadmium Glass-filled Thermoplastic, UL 94V-0 Glass-filled Thermoplastic, UL 94V-0 Thermoplastic, UL 94V-0 Thermoplastic, UL 94V-0 Glass filled Thermoplastic, UL 94V-0 black machined black or white machined black stamped black stamped black stamped or machined copper alloy copper alloy copper alloy copper alloy copper alloy gold over nickel gold over nickel gold over nickel (standard); gold over PdNi gold over nickel gold over nickel X X X X X X X X D*NG D*SF D*U X X 50, 200, 500 yes X X AWG 26 - 28 50, 200, 500 yes AWG 18 - 30 50, 200, 500 available X X X X X X X X X X D* connectors are available for high performance uses according to DIN 41652. D* ZD* connectors are available for applications where price is the primary driver. ZD* ZD*A high density connectors are available for applications where price is the primary driver. ZD*A D*A crimp connectors are available for applications where price is the primary driver. D*A Combo-D connectors offer an industry standard shield I/O interconnect, with the flexibility of a customized special. Combo-D X X X X X Not Applicable 50, 200, 500 yes X X AWG 20 - 28 50, 200 yes X X AWG 24 - 26 50, 200 yes X X AWG 20 - 28 50, 200 yes 9, 15, 25, 37, 50 9, 15, 25, 37, 50 15, 26, 44, 62, 78 9, 15, 25, 37, 50 1250 VAC 1000 VAC 500 VAC 500 VAC 5.0 A at 25°C 3.5 A at 70°C 5.0 A max. 2.0 A max. 5.0 A max. 10 milli Ohm max. 20 milli Ohm max. 15 milli Ohm max. 15 milli Ohm max. -55°C/125°C -55°C/105°C -55°C/105°C -55°C/105°C AWG 8 - 26 50, 200, 500 yes (Mil: no) E: 2W2; 2WK2; 5W1 A: 3W3; 3WK3; 7W2; 11W1 B: 5W5; 9W4; 13W3; 17W2; 21W1 C: 8W8; 13W6; 17W5; 21WA4; 25W3; 27W2 D: 24W7; 36W4; 43W2; 47W1 varies 7.5 A max. (Signal contacts) 5.0 A max. (Coaxial contacts) 65 A max. (HEP) 5.0 A max. (HV contacts) 10 milli Ohm max. (Signal contacts) -55°C/125°C (Mil: 150°C) 20 hrs 12 hrs 12 hrs 12 hrs 20 hrs (Mil: 48 hrs) steel steel steel steel steel tin tin tin tin tin Thermoplastic, UL 94V-0 Glass-filled Thermoplastic, UL 94V-0 Glass-filled Thermoplastic, UL 94V-0 Thermoplastic, UL 94V-0 Glass-filled Thermoplastic, UL 94V-0 black machined black stamped brass (male) phosphore bronze (female) black stamped black stamped black machined copper alloy copper alloy copper alloy gold over nickel gold over nickel gold over nickel X X X X X X X X X copper alloy gold over nickel gold over nickel in contact area, balance tin X X X X X X X X X X X X www.ittcannon.com Cannon Combo-D Part Number Configurator US Version DBM E 9C4 Product Family Designator D*M = Solder Cup (Industrial & Space/Non-Magnetic) D*MM = Solder Cup (Military / Hi-Rel, 50 microinch gold plating) D*A = Crimp Hardware Modifier blank = .120” (3.05mm) Through Hole C = 90° Metal Bracket, #4-40 Fastener and Boardlock D = 90° Metal Bracket, #4-40 Fastener and #4-40 Screwlock E = #4-40 Clinchnut G = 90° Metal Bracket, #4-40 Fastener, #4-40 Screwlock, Boardlock H = .300” (7.6mm) Standoff, #4-40 Screwlock J = 90° Metal Bracket, M3 Fastener, M3 Screwlock, Boardlock K = .162” (4.11mm) Through Hole L = 90° Metal Bracket, M3 Fastener, Boardlock N = .300” (7.6 mm) Standoff, #4-40 Screwlock, Boardlock O = 90° Metal Bracket, M3 Fastener, M3 Screwlock P = 90° Metal Bracket, #4-40 Fastener Q = .300” (7.6 mm) M3 Standoff S = 90° Metal Bracket, M3 Fastener T = .300” (7.6 mm) M3 Standoff U = .300” (7.6 mm) Standoff, M3 Screwlock and Boardlock V = .300” (7.6 mm) #4-40 Standoff W = .300” (7.6mm) Standoff, M3 Screwlock P J K87 Shell Material and Plating Modification Code blank = Carbon steel, Yellow chromate over zinc A101 = Carbon steel, Yellow chromate over cadmium A197 = Carbon steel, Pure Tin over Nickel (socket side only) RoHS K87 = Carbon steel Pure Tin over Nickel (pin shell with grounding dimples) RoHS F225 = Stainless steel, Passivated RoHS NMBK52 = Gold plated, non-magnetic for space applications Contact Termination Code blank = Solder cup (D*M/D*MM), Crimp (D*A) J = 90° PCB signal contact, (ø.030” × .170” long) N = Straight PCB signal contact, (ø.030” × .178” long) V = 90° PCB signal contact, (ø.024” × .157” long) Y = Straight PCB signal contact, (ø.024” × .178” long) Contact Gender P = Pin /Male (plug) S = Socket /Female (receptacle) X = M3 Clinchnut Layout (Example: 5W1- Total number of 5 contacts with 1 size 8 cavity) Y = Dual Float Mount Shell Size E: 2W2, 2WK2, 5W1 Z = .300” (7.6mm) #4-40 Standoff, Boardlock Shell Size A: 3W3, 3WK3, 7W2, 11W1 Shell Size B: 5W5, 9W4, 13W3, 17W2, 21W1 Shell Size C: 8W8, 13W6, 17W5, 21WA4, 25W3,27W2 Shell Size D: 24W7, 36W4, 43W2, 47W1 W = Empty size 8 cavities C = 75 Ohm Coax installed (straight or 90°) X = 50 Ohm Coax installed (straight or 90°) H = High power installed (straight) P = High power installed (Euro, 90°only) V = High voltage installed (available in straight PC only) G = Guide pin or guide socket installed R = Mini High Power 90° installed E = HEP Contact (installed or loose) Cannon Combo-D Part Number Configurator European Version DBM E 9C4 P Product Family Designator D*M = D*M Combo-D * = Shell size – E, A, B, C and D Hardware Modifier blank = 3,05mm (.120”) Through Hole E = #4-40 Clinchnut (solder cup, straight solder pin and 1A0N) N = 7,66 mm (.300”) with #4-40 post and pushfit, only OL4 Q = 7,66 mm (.300”) M3 standoff, only OL4 T = 7,66 mm (.300”) M3 post, only OL4 U = 7,66 mm (.300”) standoff, M3 Post with pushfit, only OL4 V = 7,66 mm (.300”) #4-40 standoff, only OL4 X = M-3 Clinchnut (solder cup, straight solder pin and 1A0N) Y = Dual Float Mount, only solder cup Z = 7,66 mm (.300”) #4-40 with pushfit, only OL4 Layout (Total number of contacts + number of size 8 cavities) Shell Size E: 2W2, 2WK2, 5W1 Shell Size A: 3W3, 3WK3, 7W2, 11W1 Shell Size B: 5W5, 9W4, 13W3, 17W2, 21W1 Shell Size C: 8W8, 13W6, 17W5, 21WA4, 25W3,27W2 Shell Size D: 24W7, 36W4, 43W2, 47W1 W = Empty size 8 cavities C = 75 Ohm Coax installed (straight or 90°) X = 50 Ohm Coax installed (straight or 90°) H = High power installed (straight) P = High power installed (Euro, 90°only) V = High voltage installed (available in straight PC only) G = Guide pin or guide socket installed R = Mini High Power 90° installed Contact Gender P = Pin /Male (plug) S = Socket /Female (receptacle) Code only applicable for Pressfit High Power size 8 contact P00 = Pessfit High power PCB dia 2,9 mm P01 = Pessfit High power PCB dia 3,1 mm P02 = Pessfit High power PCB dia 3,5 mm P00 1A5N A191 K87 146 PCB Mounting Method 146 = Pushfit for PCB hole dia. 3,0 mm 161 = Pushfit for PCB hole dia. 3,2 mm, straight version only 162 = Pushfit for PCB hole dia. 3,2 mm, 90° version only Shell Plating Modification Code blank = Yellow chromate over zinc A197 = Pure Tin over Nickel (socket side only) RoHS K87 = Pure Tin over Nickel (pin shell with grounding dimples) RoHS ontact Plating Modification Code C blank = performance class 3 (50 mating cycles) A191 = performance class 2 (200 mating cycles) A190 = performance class 1 (500 mating cycles) Contact Tail Modifier blank = Solder cup (size 8 contacts not loaded on these versions) OL2 = Not standard, please call factory OL3 = Solder pin /pc tail, straight 1A0N = Without mouting bracket, hole dia. 3,05 mm 1A5N = Plastic bracket with bushing dia. 3,05 mm 1A6N = Plastic bracket with #4-40 threaded post 1A7N = Metal bracket and #4-40 captive nut 1A8N = Metal bracket with #4-40 threaded post 1A9N = Metal bracket and M3 captive nut 1ADN = Plastic bracket with grounding bracket and bushing dia. 3,05 mm 1AFN = Metal bracket with bushing dia. 3,05 mm 1AGN = Plastic bracket with grounding bracket and M3 threaded post 1AHN = Metal bracket with M3 threaded post 1AJN = Plastic bracket with grounding bracket and #4-40 threaded post 1APN = Plastic bracket with M3 threaded post – Not available, please use 1AHN instead 1ATN = Plastic bracket and M3 captive nut – Not available, please use 1A9N instead 1AUN = Plastic bracket and #4-40 captive nut 1AVN = Plastic bracket with grounding bracket and captive M3 nut – Not available, please use 1A9N instead 1AWN = Plastic bracket with grounding bracket and captive #4-40 nut – Not available, please use 1A7N instead 1AEN = 90° low profile metal bracket with M3 captive nut 1AAN = Low profile metal bracket and #4-40 captive nut – Not available, please use 1A7N instead 1ABN = Low profile metal bracket and M3 threaded post – Not available, please use 1AHN instead 1ACN = Low profile metal bracket and #4-40 threaded post – Not available, please use 1A8N instead 1ALN = Low profile metal bracket and bushing dia. 3,05 mm – Not available, please use 1AFN instead www.ittcannon.com Connect with your ITT Cannon representative today or visit us at www.ittcannon.com Connect with the experts. From rocket launchers and communication satellites, to commercial avionics and industrial applications, we connect data, power and signal with those who need it most. CHINA—Shenzhen City +86.755.2726.7888 GERMANY—Weinstadt +49.7151.699.0 INDIA—Bangalore +91 22 67843000 JAPAN—Kanagawa +81.462.57.2010 SINGAPORE +65 66974205 FRANCE +33.1.60.04.93.93 HONG KONG +852.2732.2720 ITALY—Lainate +39.02938721 MEXICO—Nogales +52.631.311005 UK—Basingstoke +44.1256.347400 The “ITT Engineered Blocks“ symbol, “Engineered for life,” “ITT” and “Cannon“ are registered trademarks of ITT Inc. Specification and other data are based on information available at the time of printing, and are subject to change without notice. USA—Irvine, CA +1.800.854.3028 © 2019 ITT Inc. ITT Cannon D-Subminiature Product Selection Guide | 062019