F2UOA01BBC

C&K F Series Pushbutton Switches Features/Benefits • Up to 10 poles per module • Various contact terminals • Various mounting & switch ganging configurations • Mechanical indicator buttons • Illumination options • RoHS compliant Specifications SWITCHING POWER: F module max. AC/DC: Silver: 50 VA/15W, Gold: 1 VA/300 mW. SWITCHING VOLTAGE: F module max. AC/DC: Silver: 125/30V, Gold: 50/30 V. SWITCHING CURRENT: F module max. AC/DC: Silver: 0.5A/0.5A, Gold: 0.04A/0.01A. CARRYING CURRENT: Max at du = 20C: Silver: < 2A, Gold: 105 operations “GR”: >3.5 x 104 operations. CONTACT RESISTANCE: Initial: Typical %10 mΩ, max. 20 mΩ After operating life: %100 mΩ INSULATION RESISTANCE: ^109 Ω between open contacts, ^109 Ω between chassis and contacts. CAPACITANCE (at f = 10 kHz): %0.7 pF between 2 contacts. TOTAL TRAVEL/LATCHING TRAVEL: 4.7mm/3.3mm (.185 inch/ .130 inch). All models and options are RoHS compliant and compatible. NOTE: For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. All models and options are RoHS compliant and compatible. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Typical Applications • Audio selection • Digital equipment interface • Medical equipment interface A Pushbutton TYPICAL F OPERATING FORCE: 2U: 6.5N (650 grams); 4U: 6.5N (650 grams); 6U: 7.5N (750 grams); 8U: 9.0N (900 grams); 10U: 9.0N (900 grams). EUROPEAN TYPICAL SF OPERATING FORCE: 2U: 3.5N±0.5N (350 grams±100 grams); 4U: 5N±1N (500 grams±100 grams); 6U: 6.5N±1N (650 grams±100 grams); 8U: 9.0N±1N (900 grams±100 grams). OPERATING TEMPERATURE RANGE: -40˚C to 70˚C. Materials HOUSING: Polycarbonate UL 94V-0 or polyester UL 94V-0. ACTUATOR: Polyester UL 94V-0. MOVABLE CONTACTS: Bimetal brass, silver plated, gold plate over nickel. STATIONARY CONTACTS & TERMINALS: Brass, silver plated, gold plated. TERMINAL BOARD: Polyester UL 94V-0. RETURN SPRING: Music wire. TERMINAL SEAL: RTV adhesive sealant. CHASSIS: Steel. LOCKOUT PIN: Steel. BLOCKERS: Steel. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages A-90 thru A-98. For additional options not shown in catalog, consult Customer Service Center. If requesting only a switch, select either a North American or European switch as noted below. Chassis and buttons are sold separately. If multiple stations are selected, we will assume all switches are the same unless noted otherwise. North American Order Code - Switch Only Designation F F Series FLT Light touch F series ZF Central mounted F series Contact Arrangement 2U 2PDT Mechanical Function 4U 4PDT OA Momentary 6U 6PDT EE Alternate (push-push) 8U BPDT GR Interlock 10U 1OPDT AOR Central release OASP Momentary with lockout GRSP Interlock with lockout Terminal Sealing (NONE) None TB Top/bottom Terminal Style (NONE) Solder lugs & PC pins 01A Cut solder lugs 01B Cut PC pins, for other configurations, consult factory Electrical Function (NONE) BBM M MBB (special) Contact Material (NONE) Silver, AG AU Gold Dress nut* *Central mounted F series only (NONE) No dress nut B Black C Chrome Dimensions are shown: Inches (mm) Specifications and dimensions subject to change A–89 www.ittcannon.com C&K F Series Pushbutton Switches A Pushbutton European Order Code - Switch Only Designation SF F Series ZF Central mounted F series Contact Arrangement 2U 2PDT Mechanical Function 4U 4PDT OA Momentary 6U 6PDT EE Alternate (push-push) 8U BPDT GR Interlock *Minimum order quantities apply. Terminal Style (NONE) Solder lugs & PC pins LB Cut solder lugs PB Cut PC pins, for other configurations, consult factory Electrical Function (NONE) BBM Contact Material (NONE) Silver, AG P Gold Dress nut* *Central mounted F series only (NONE) No dress nut B Black C Chrome Order Code - Buttons Solid Buttons Mechanical Indicator Buttons Style F01 FMR F02 FG* F12 FSC F13 FSD F14 FU12 F15 FSB F16 FE F19 FA F21 F001 Button Color 01 Black 02 White 03 Red 04 Light gray Style F01 FA100 F02 FA101 F07 FA120 F08 FA2O1 F11 FA200* Shell Color 01 Black Out Position Color 01 Black In Position Color 02 White 06 Yellow 07 Blue 08 Green 12 Orange *Button options for central mounting configurations, use ‘FG’ for central mount with chrome dress nut, use ‘FA200’ for central mount with black dress nut. BUTTON REMOVAL A button of a push-push switch should only be removed in the “OFF” non-latching position. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change A–90 www.ittcannon.com C&K F Series Pushbutton Switches A Order Code - Chassis To order a switch with chassis, create the switch part number listed above and add the Chassis part number configurator information at the end of the part number. Note: We do not guarantee or recommend interlocking beyond 10 stations. Pushbutton C No. of Stations 01 thru 23 Comes with standard .094 (2,4mm) mounting holes Note: Single station chassis available with special mounting configurations, consult factory. *Minimum order quantities apply. Spacing 00 10 12.5 15 17.5 20 between Stations Single station 10mm 12.5mm 15mm 17.5mm 20mm Special Acknowledgements See note SWITCHES WITH STANDARD OPTIONS F2UEE CONTACT ARRANGEMENT 2U 4U 6U 8U 10U LENGTH DIM ‘L’ 0.827 (21,00) 1.300 (33,00) 1.770 (45,00) 2.240 (57,00) 2.720 (69,00) ZF2UEEBF11010108 CONTACT ARRANGEMENT 2U 4U 6U 8U 10U LENGTH DIM ‘L’ 0.827 (21,00) 1.300 (33,00) 1.770 (45,00) 2.240 (57,00) 2.720 (69,00) Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change A–91 www.ittcannon.com C&K F Series Pushbutton Switches A Pushbutton Designation, North America F F Series FLT Light touch F series ZF Central mounted F series DESIGNATION Designation, Europe SF F Series ZF Central mounted F series CONTACT ARRANGEMENT PC MOUNTING OPTION CODE NO. OF POLES 2PDT 4PDT 6PDT 8PDT 10PDT SCHEMATIC 2U 4U 6U 8U 10U 2X 3X 4X 5X MECHANICAL FUNCTION North America OPTION CODE FUNCTION Momentary Alternate (push-push) Interlock Central release Momentary with lockout Interlock with lockout Europe OPTION CODE FUNCTION Momentary Alternate (push-push) Interlock OA EE GR AOR OASP GRSP OA EE GR TERMINAL SEALING (NONE) NO SEAL TB TOP & BOTTOM F2UEE shown in example above. NOTE: Available for North America only Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change A–92 www.ittcannon.com C&K F Series Pushbutton Switches TERMINAL STYLE (NONE) SOLDER LUGS & PC PINS A 01B PB CUT PC PINS (North America) CUT PC PINS (Europe) 01A LB CUT SOLDER LUGS (North America) CUT SOLDER LUGS (Europe) Pushbutton .067 (1.70) .079 (2.01) ELECTRICAL FUNCTION OPTION CODE FUNCTION BBM Non-shorting MBB Shorting (North America only) (NONE) M CONTACT MATERIAL NORTH AMERICA OPTION CODE EUROPE OPTION CODE RoHS COMPLIANT * YES YES RoHS COMPATIBLE * YES YES MATERIAL SILVER, AG GOLD RATING 50 VA/15 W; 125/30 V; 0.5/0.5 A 1 VA/300mW; 50/30 V; 0.04 A/0.01 A (NONE) AU (NONE) P * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. NOTE: For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. DRESS NUT (NONE) NO DRESS NUT FOR F & F/LT DESIGNATIONS B BLACK C CHROME PANEL CUTOUT PANEL CUTOUT NOTE: Available with ZF designation and FG button. NOTE: Available with ZF designation and FA200 buttons. Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change A–93 www.ittcannon.com C&K F Series Pushbutton Switches COLOR A Pushbutton STYLE F01 FMR SOLID BUTTON STYLE F02 FG F12 FSC F13 FSD F14 FU12 OPTION CODE COLOR BLACK WHITE RED LT. GRAY 01 02 03 04 Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change A–94 www.ittcannon.com C&K F Series Pushbutton Switches COLOR SOLID BUTTON STYLE A Pushbutton STYLE F15 FSB F16 FE OPTION CODE COLOR BLACK WHITE RED LT. GRAY 01 02 F19 FA F21 F001 03 04 SHELL COLOR IN POSITION COLOR MECHANICAL BUTTON STYLE OUT POSITION COLOR STYLE F01 FA100 F02 FA101 Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change A–95 www.ittcannon.com C&K F Series Pushbutton Switches SHELL COLOR IN POSITION COLOR A Pushbutton STYLE F07 FA120 MECHANICAL BUTTON STYLE OUT POSITION COLOR F08 FA201 F11 FA200 SHELL COLOR 01 BLACK OUT POSITION COLOR 01 BLACK IN POSITION COLOR OPTION CODE COLOR WHITE YELLOW BLUE GREEN ORANGE 02 06 07 08 12 Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change A–96 www.ittcannon.com C&K F Series Pushbutton Switches SPACING CHASSIS NO. OF STATIONS A Pushbutton NUMBER OF STATIONS C00 Thru C10 Comes with standard 0.094 (2,44mm) mounting holes NOTE: Single station chassis available with mounting configurations, consult factory. SPACING 00 SINGLE STATION 10 10mm No. of Stations 2 3 4 .394 (10,0) 5 6 7 8 9 10 Dim. ‘A’ 1.182 (30,02) 1.575 (40,01) 1.969 (50,01) 2.363 (60,02) 2.757 (70,03) 3.150 (80,01) 3.544 (90,02) 3.938 (100,03) 4.331 (110,01) Dim. ‘B’ 1.418 (36,02) 1.811 (46,00) 2.205 (56,01) 2.599 (66,01) 2.993 (76,02) 3.386 (86,00) 3.780 (96,01) 4.174 (106,02) 4.567 (116,00) Tolerance 0.005 0.010 0.010 0.010 0.015 0.015 0.015 0.015 0.015 12.5 12.5mm No. of Stations 2 3 4 .492 (12,5) 5 6 7 8 9 10 Dim. ‘A’ 1.200 (30,48) 1.692 (42,98) 2.184 (55,47) 2.676 (67,97) 3.169 (80,49) 3.661 (92,99) 4.153 (105,49) 4.645 (117,98) 5.137 (130,48) Dim. ‘B’ 1.436 (36,47) 1.928 (48,97) 2.420 (61,47) 2.912 (73,96) 3.405 (86,49) 3.897 (98,98) 4.389 (111,48) 4.881 (123,98) 5.373 (136,47) Tolerance 0.005 0.010 0.010 0.010 0.015 0.015 0.015 0.015 0.015 Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change A–97 www.ittcannon.com C&K F Series Pushbutton Switches SPACING A Pushbutton SPACING 15 2 3 4 5 6 7 8 9 10 15mm Dim. ‘A’ 1.374 (34,90) 1.969 (50,01) 2.560 (65,02) 3.150 (80,01) 3.741 (95,02) 4.332 (110,03) 4.922 (125,02) 5.513 (140,03) 6.103 (155,02) Dim. ‘B’ 1.615 (41,02) 2.205 (56,01) 2.796 (71,02) 3.386 (86,00) 3.977 (101,02) 4.568 (116,03) 5.158 (131,01) 5.749 (146,02) 6.339 (161,01) Tolerance 0.005 0.010 0.010 0.010 0.015 0.015 0.015 0.015 0.015 CHASSIS NO. OF STATIONS No. of Stations .591 (15,0) 17.5 17.5mm No. of Stations 2 3 4 5 6 7 8 9 10 Dim. ‘A’ 1.477 (37,52) 2.166 (55,02) 2.855 (75,52) 3.544 (90,02) 4.233 (107,52) 4.922 (125,02) 5.611 (142,52) 6.300 (160,02) 6.989 (177,52) Dim. ‘B’ 1.713 (43,51) 2.402 (61,01) 3.091 (78.51) 3.780 (96,01) 4.469 (113,51) 5.158 (131,01) 5.847 (148.51) 6.536 (166,01) 7.225 (183,52) Tolerance 0.005 0.010 0.010 0.010 0.015 0.015 0.015 0.015 0.015 20 2 3 4 5 6 7 8 9 20mm Dim. ‘A’ 1.575 (40,01) 2.363 (60,02) 3.150 (80,01) 3.938 (100,03) 4.725 (120,02) 5.512 (140,00) 6.300 (160,02) 7.087 (180,01) 7.875 (200,03) Dim. ‘B’ 1.811 (46,00) 2.599 (66,01) 3.386 (86,00) 4.174 (106,02) 4.961 (126,01) 5.748 (146,00) 6.536 (166,01) 7.323 (186,00) 8.111 (206,02) Tolerance 0.005 0.010 0.010 0.010 0.015 0.015 0.015 0.015 0.015 Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change No. of Stations 10 A–98 www.ittcannon.com