FA0108RS02B

C&K F Series Miniature ROTA-SLIDE Rotary Switches ® Features/Benefits • Multi-pole and multi-position • Panel and PCB mounting • Positive detent • Value added capability Typical Applications • Small appliances • Testing fixtures • Safety equipment Models Available Specifications CONTACT RATING: Q contact material: 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC (UL/CSA). See page L-44 for additional ratings. ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. INDEXING: 45º or 90º -one contact models; two contact models, 4 pos. max. Models with common terminal -90º, 4 pos. max. OPERATING & STORAGE TEMPERATURE: -30ºC to 65ºC Materials HOUSING & BUSHING: 6/6 Nylon (UL 94V-2). ACTUATOR: 6/6 nylon (UL 94V-2). CONTACTS: Q contact material: Copper, silver plated. See page L-44 for additional contact materials. TERMINALS: Q contact material: Copper, silver plated. See page L-44 for additional contact materials. CONTACT SPRING: Music wire or stainless steel. MOUNTING NUT: Brass, nickel plated. TERMINAL SEAL: Epoxy. NOTE: Any models supplied with Q or B contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Custome Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages L-42 thru L-44. For additional options not shown in catalog, consult Customer Service Center. L Rotary Switch Function FA05 SP, 90° Index, 3 pos. F103 SP, 45° Index, 3 pos. F203 DP, 45° Index, 3 pos. Actuator FA01 SPDT, 90° Index 15 Screwdriver slot without bushing FC03 SP, W/Common 90° Index, 3 pos. 08 .585" high with .156" flat Mounting Style RN PC RS 5/16-32 threaded bushing Terminations 02 PC Thru-hole WC Wire lead Contact Material Q Silver B Gold Seal NONE No seal E Epoxy seal Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–41 www.ittcannon.com C&K F Series Miniature ROTA-SLIDE® Rotary Switches SWITCH FUNCTION 45º INDEXING SCHEMATICS 45º INDEXING NO. POLES SP DP MODEL NO. SWITCH FUNCTION 3 Position 3 Position TERMINALS 8-1-2-3* All Terminals F103 F203 F1XX MODELS F2XX MODELS Break-before-make contacts. Terminal numbers are molded on bottom of housing. Actuators are shown in position 1. F1XX, F2XX models: No common terminal is present. Switching function is provided by movable contacts shorting adjacent pairs of stationary contacts. 90º INDEXING NO. POLES MODEL NO. SWITCH FUNCTION SPDT 3 Position NOTE: *Switches with ‘02’ PC terminations have additional terminal no. 5 as switch support only. This terminal is not connected electrically inside switch. 90º INDEXING SCHEMATICS TERMINALS 8-1-3 8-1-3-5 FA01 SP FA05 SP WITH COMMON FC03 3 Position C-1,C-2,C-3 L Rotary FA01 MODEL FA05 MODEL C= Common Terminal FCXX MODEL Break-before-make contacts. Terminal numbers are molded on bottom of housing. Actuators are shown in position 1. FAXX models: No common terminal is present. Switching function is provided by movable contacts shorting adjacent pairs of stationary contacts. FCXX models: Common terminal is present. NOTE: *Switches with ‘02’ PC terminations have additional terminal no. 5 as switch support only. This terminal is not connected electrically inside switch. 7 6 8 5 4 3 2 Part number show: FC0315RN02Q Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–42 www.ittcannon.com C&K F Series Miniature ROTA-SLIDE Rotary Switches ® ACTUATOR 15 SCREWDRIVER SLOT WITHOUT BUSHING 08 .585" HIGH WITH .156" FLA Shown with ‘RN’ mounting style; not available with ‘RS’ mounting style or FCXX models. Must be ordered with ‘RS’ mounting style. MOUNTING STYLE RN PC RS 5/16-32 THREADED BUSHING PANEL MOUNTING 5/16 IN. BUSHING PC mount, no bushing, position numbers molded standard. Shown with ‘15’ actuator; not available with ‘08’ actuator or FCXX models. Panel mount, with 5/16 in.–32 threaded bushing. Mounting nut (P/N 175020201) included. Must be ordered with ‘08’ actuator option. TERMINATIONS 02 PC THRU-HOLE WC WIRE LEAD L Rotary PC MOUNTING F1XX, F2XX & FAXX Models Black wire standard, other colors and lengths available, consult Customer Service Center. UL style 1015. 02 PC THRU-HOLE FCXX Models Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–43 www.ittcannon.com C&K F Series Miniature ROTA-SLIDE® Rotary Switches CONTACT MATERIAL OPTION CODE RoHS COMPLIANT* YES YES RoHS COMPATIBLE* YES YES CONTACT AND TERMINAL MATERIAL SILVER 2 GOLD 1 RATING POWER LOW LEVEL/DRY CIRCUIT 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC (UL/CSA). 0.4 VA MAX. @ 20 V AC or DC MAX. Q B * Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications. 1 2 CONTACTS & TERMINALS: Copper, with gold plate over nickel plate. CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options). NOTE: Any models supplied with Q or B contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. All models with all options when ordered with ‘Q’ contact material. SEAL NONE NO SEAL E EPOXY SEAL Not available on FCXX models. L Rotary Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–44 www.ittcannon.com