KJA6T9W35SN

Cover headline Cover headline 38999-Style Connectors Cannon 38999-Style Series I, II, III Connectors ITT Cannon connectors set the industry standard for performance and reliability in the most demanding conditions and harshest environments. Our 38999-Style Series I, II, III Connectors are designed to withstand the extreme shock, exposure and vibration that are commonplace in Defense and Commercial Aerospace applications. We offer lightweight, space-saving solutions to our military customers, coupled with high bandwidth and high power for severe service application needs. More than a century of experience, coupled with unparalleled engineering and testing resources, has established ITT Cannon as one of the premier providers of interconnect solutions worldwide. With a proven track record for engineering and manufacturing excellence, ITT Cannon continues to deliver a broad range of innovative products and solutions that enable our customers to meet their most demanding design requirements, where impeccable reliability and safety are essential. Example Application Areas • Defense – – – – – – – – – – Military aircraft Military communication systems Hand held and vehicle platforms Military ground support systems Military computer systems Harsh environment platforms Blind mate applications High density, low signal platforms Hand held and vehicle platforms Unmanned systems • Aerospace – Aircraft engines – General electric testing equipment – Commercial business aviation – Aerospace launch vehicles Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com 38999-Style Connectors: Precision Engineered, Lightweight & Rugged ITT Cannon’s 38999-Style Series I, II, III Connectors are designed to tackle the most extreme conditions with exceptional versatility in the harshest environments. Small, lightweight and highly reliable, our D38999Style connectors deliver consistency and performance when it matters most. D38999-Style Series I (KJL) ITT Cannon KJL 38999-Style Series I connectors offer high-density contact arrangements in a light-weight miniature circular connector. ITT Cannon KJL series connectors are an industry standard for military and aerospace applications. The environmentally sealed KJL series features quick-mating, three-point bayonet coupling and operates across a wide temperature range. D38999-Style Series II (KJ) ITT Cannon KJ 38999-Style Series II are a weight-reduced and low profile circular connector ideally suited for avionic applications where space and weight are prime considerations. It offers high-density contact arrangements in a light-weight miniature circular connector. ITT Cannon KJ series connectors feature a quick-mating, threepoint bayonet coupling, are environmentally-sealed and operate across a wide temperature range. ITT Cannon KJ series mil spec connectors were originally designed for military vehicles and are now industry standard aerospace and military connectors. 38999-Style Series III (KJB) The de-facto standard circular connector for use in harsh military and aerospace environments, ITT Cannon's KJB 38999-Style Series III Connectors offer highdensity contact arrangements in a light-weight miniature circular connector. ITT Cannon's KJB series connectors have quick-mating, triple-lead threaded, self-locking coupling, are environmentally-sealed and operate across a wide temperature range. These connectors were originally designed for military vehicles and are now use for multiple applications throughout the Aerospace & Defense Industry. 38999-Style Series III Composite (KJB) A lightweight standard circular connector for use in military and aerospace environments with significant weight savings over aluminium-bodied D38999-Style. High density layouts with up to 128 data connections and power contacts rated up to 23A. Features a triple-start coupling with anti-decoupling ratchet for high vibration applications, Cadmium and Electroless Nickel platings, 100 percent scoop-proof contacts and rated to 1500 mating cycles. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com Table of Contents Specifications and Test Data ..............................................................................................................................................3-5 38999-Style Series I ............................................................................................................................................................6-9 38999-StyleSeries II ........................................................................................................................................................10-15 38999-Style Series III ......................................................................................................................................................16-18 38999-Style Series III Composite....................................................................................................................................19-20 Polarizing Positions .........................................................................................................................................................21 Contact Arrangements.....................................................................................................................................................22-23 Contacts...........................................................................................................................................................................24-27 Torque Values / Wire Dimensions........................................................................................................................................28 Backshells........................................................................................................................................................................29-31 Tools .....................................................................................................................................................................................32 Assembly Instructions ..........................................................................................................................................................33 Specifications .......................................................................................................................................................................34 Product Safety and Warranty ...............................................................................................................................................35 About ITT Cannon ................................................................................................................................................................36 In addition to our 38999-style series, we also offer these connectivity solutions: Combo D-Sub Product offering includes ability to integrate signal and coax, high power, and high voltage. CA-Bayonet – Signal and power connectors with exceptional sealing against the ingress of fluids and will withstand the effects of high vibrations. Microminiature – High performance and reliability with exceptional versatility. Available in rectangular, circular and strip configurations, many of our connectors are designed to be comparable to the MIL-DTL-83513 specification. Dimensions shown in inches (mm) Specifications and dimensions subject to change 2 www.ittcannon.com 38999-Style Series I, II, III Connectors* SERIES I SERIES II SHELL HARDWARE is aluminum alloy GROUNDING FINGERS (Standard on Series I connector) MONOBLOC INSERT HIGH STRENGTH MULTIPLE-TINE METAL RETAINING CLIP assures positive retention with inwardly deflected tines that lock securely behind contact shoulder CLOSED ENTRY SOCKET CONTACT DESIGN SERIES III WIRE SEALING GROMMET HIGH STRENGTH MULTIPLE-TINE METAL RETAINING CLIP assures positive retention with inwardly deflected tines that lock securely behind contact shoulder SIMPLE, STRONGER CONTACTS are designed to resist bending and are crimp terminated INSULATOR TO SHELL SEAL INSULATOR TO SHELL SEAL WIRE SEALING GROMMETS SIMPLE, STRONGER CONTACTS are designed to resist bending and are crimp terminated WIRE SEALING GROMMETS PERIPHERAL SEALING GASKET PERIPHERAL SEALING GASKET INTERFACIAL SEAL CLOSED ENTERY SOCKET CONTACT DESIGN PERIPHERAL SEAL around the connector interface is designed to minimize compression set when connectors are mated SIMPLER, STRONGER CONTACTS are designed to resist bending and are crimp terminated •C  orrosion and zinc resistant shells of aluminum alloy with cadmium and zinc over nickel plating withstand a 500 hour salt spray exposure • Rear release crimp snap-in contacts • High contact density • Standard MIL-C-39029 contacts, MIL-I-81969 application tools and MIL-STD 1560 insert arrangements • • • • GROUNDING FINGERS HIGH STRENGTH MULTIPLE-TINE METAL RETAINING CLIP assures positive retentin with inwardly deflected tines that lock securely behind contact shoulder RESILIENT PIN INTERFACIAL SEALS feature individual raised seal barriers around each pin contact Special/custom capabilities 100% scoop-proof - Series I and III Light weight /Low Profile - Series II Operates under severe high temperature vibration testing through 200 C - engineered for high density circuitry - Series III INTERFACIAL SEAL • Interfacial seal helps prevent electrolytic erosion of contacts - Series III • Superior EMI shielding provides outstanding protection up to 65dB at 10 GHZ. - Series III Specification Comparison Design Criteria Series I Series II Series III (Aluminum) Series III (Composite) Low Profile/Light Weight no yes no yes Scoop Proof yes no yes yes Coupling System Bayonet Bayonet Triple Start Thread Triple Start Thread Electrolytic Erosion no no yes yes Durability (Cycles) 500 250 500 1500 High Impact Shock yes no yes yes Shell Size 25 650 in/lbs 150 in/lbs 1000 in/lbs 1000 in/lbs Random Vibration "J" 49.5G, Ambient 43.7G, Ambient 49.5G, Ambient 49.5G, Ambient Sine Vibration 60G 60G 60G Sand, Dust, Ice yes yes yes Shell Size 9-25 9-25 9-25 External Bending Moment 8-24 Contact Rating Crimp Well Data Contact Size Test Current DC Test Amperage 22D 22M** 22** 20 16 12 5 3 5 7.5 13 23 Maximum Millivolt Drop* 40 30 40 35 25 25 Well Diameter .0345 ± .0010 .0280 ± .0010 .0365 ± .0010 .0470 ± .0010 .0670 ± .0010 .1000 ± .0020 Well Depth .157/.141 .157/.141 .157/.141 .229/.209 .229/.209 .229/.209 * Maximum millivolt drop data is determined by measuring resistance of mated contacts from end to en ** For reference only Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 3 38999-Style Series I, II, III Connectors* Performance and Material Specifications MATERIALS AND FINISHES *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. Aluminum Receptacle Shell Aluminum alloy Insulator High grade plastic Contacts Copper alloy, gold plate Grommet and Seal Silicone base elastomer Jam Nut Aluminum alloy Grounding Spring *Finish as noted in How To Order sections. Composite Grounded Plug Aluminum alloy* High grade plastic Copper alloy, gold plate Silicone base elastomer Beryllium copper Receptacle Thermoplastic High grade plastic Copper alloy, gold plate Silicone base elastomer - Grounded Plug Thermoplastic High grade plastic Copper alloy, gold plate Silicone base elastomer Beryllium copper ELECTRICAL DATA Contact Size: 22D, 22M*, 22*, 20, 16 and 12 Contact Rating and Wire Size Accomodation Wire Size 22D 22M* 28 26 24 22 20 18 16 14 12 1.5 2.0 3.0 5.0 - 1.5 2.0 3.0 - Contact Size and Test Amps 22* 20 2.0 3.0 5.0 - 3.0 5.0 7.5 - 16 12 7.5 10.0 13.0 - 17.0 23.0 *For reference only Service Rating Altitude Sea Level 50,000 ft. 70,000 ft. 100,000 ft. Service Rating M Mated Unmated 1300 800 800 800 Service Rating N Mated Unmated 1000 600 600 600 1300 550 350 200 1000 400 260 200 Service Rating I Mated Unmated 1800 1000 1000 1000 1800 600 400 200 Service Rating II Mated Unmated 2300 1000 1000 1000 2300 800 500 200 Test voltage, AC (rms), work voltage to be determined by application Test Data Test Description Parameters Durability 500 cycles of mating and unmating, 250 cycles for Series II with spring fingers Temperature Range Class F, N; - 65ºC (-85ºF) to + 200ºC (+392ºF) Class A; - 65ºC (-85ºF) to + 150ºC (+302ºF) Class B,W: - 65ºC (-85ºF) to + 175ºC (+347ºF) Mated connectors are vibrated with weights to simulate rear accessory loads to the following levels: Sine Vibration: Up to 60 G's - Series I & III (at rated temperature - Series III) Not applicable for Series II. Random Vibration: 43.7 Grms at rated temperature - Series III 49.5 Grms at Ambient Temperature - Series I & III 43.7 Grms at Ambient Temperature - Series II Vibration EMI Shielding Effectiveness Class F: EMI leakage attenuation, greater than 90dB at 100Mhz, greater than 65dB at 10 GHz. Shell to shell conductivity, 1.0 millivolt max. resistance. Class W: EMI leakage attenuation, greater than 90dB at 100 MHz, greater than 50dB at 10 GHz. Shell to shell conductivity, 2.5 millivolt max. Corrosion Resistant Class B, W, and Z will withstand 500 hours salt spray. Class A, F, N, will withstand 48 hours salt spray. Fluid Immersion Connectors are fluid resistant to many fuels, solvents, coolants and oils. High Impact Shock Mated conectors terminated with MIL-C-915 cable and environmentally sealed backshells will withstand high impact shock per MIL-S-901. Applicable to Series I & III only. Altitude Designed to operate between sea level and 100,000 ft. above sea level. Other Environments Mated connectors shall withstand sand and dust per method 110 of MIL-STD-202 and be ice resistant. Applicable to Series I & III only. NOTE: For hermetic standard or test data please consult ITT. *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 4 Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com 38999-Style Series I, II, III Connectors* Insert Availability and Identification DISCLAIMER:Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. Series II 8-35 8-98 10-5 10-35 10-98 10-99 12-3 12-4 12-8 12-35 12-98 14-5 14-15 14-18 14-35 14-97 16-6 16-8 16-26 16-35 16-99 18-11 18-28 18-30 18-32 18-35 20-16 20-35 20-39 20-41 22-21 22-32 22-35 22-53 22-55 24-4 24-24 24-29 24-35 24-61 Series I & III 9-35 9-98 11-4 11-5 11-35 11-98 11-99 13-4 13-8 13-35 13-98 15-5 15-15 15-18 15-19 15-35 15-97 17-6 17-8 17-26 17-35 17-99 19-11 19-28 19-30 19-32 19-35 21-11 21-16 21-35 21-39 21-41 21-75 23-21 23-32 23-35 23-53 23-55 25-4 25-19 25-24 25-29 25-35 25-37 25-43 25-46 25-8 25-20 25-42 25-61 25-64 25-66 Total Service Contacts Rating 6 M 3 I 4 I 5 I 13 M 6 I 7 I 3 II 4 I 8 I 22 M 10 I 5 II 15 I 18 I 19 I 37 M 12 I 6 I 8 II 26 I 55 M 23 I 11 II 28 I 30 I 32 I 66 M 11 I 16 II 79 M 39 I 41 I 4 M 21 II 32 I 100 M 53 I 55 I 56 I 19 I 24 I 29 I 128 M 37 I 43 I 46 I, Twinax 8 Twinax 30 N, Coax, Twinax 42 I, Coax 61 I 64 I 66 I Contact Size 22D 6 20 www.ittcannon.com 8 13 6 7 3 4 8 22 10 14 18 19 5 1 37 8 4 6 8 26 55 21 26 29 32 2 11 2 1 66 11 16 79 37 41 2 4*** 21 32 100 53 55 48 8 12 29 19 12 128 23 40 40 53 10 38 61 8 2 *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 5 12 3 4 5 * Coax for RG-180 cables ** Coax for RG-174, -179, or -316 cables *** Twinax for M17/176-00002 cables (check factory for other cable applications) Dimensions shown in inches (mm) Specifications and dimensions subject to change 16 37 20 4 13 4** 10 11 6 2*** 8*** 3*** 4* 38999-Style Series I Connectors* How To Order MS27467-Style T 17 B 35 S Military Nomenclature MS NUMBER SHELL STYLE DISCLAIMER:Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. CLASS SHELL SIZE HARDWARE FINISH CONTACT ARRANGEMENT CONTACT STYLE MS NUMBER SHELL STYLE MS27466 - Wall Mounting Receptacle MS27468 - Jam Nut Receptacle MS27467 - Grounded Plug MS27656 - Wall Mounting Receptacle (back panel mounting) MS27505 - Box Mounting Receptacle (back panel) (Class E) CLASS E - Inactive for new design. Superseded by Class T. G - Environmental resistant Space Grade P - Environment - resistant with straight potting cup accessories T - Environment - resistant with accessory threads and teeth, except MS27505 (without rear accessory) (Class T not applicable to MS27505) POLARIZING POSITION SHELL SIZE 9, 11, 13, 15, 17, 19, 21, 23, and 25 HARDWARE FINISH STANDARD A - Bright cadmium over electroless nickel plate, -85ºF to +302ºF (-65ºC to +150ºC) B - Olive drab cadmium over electroless nickel plate, -85ºF to +347ºF (-65ºC to +175ºC) F - Electroless nickel, -85ºF to +392ºF (-65ºC to +200ºC) CONTACT ARRANGEMENT See pages 22 and 23. CONTACT STYLE P - Pin S - Socket *A - Less Pin Contact *B - Less Socket Contact *Used only when other than power contacts are to be installed (i.e. shielded, thermocouple, etc.) POLARIZING POSITION A,B,C, and D. (No letters required for normal). See page 21. Note: To order MS connectors less standard power contacts, purchase order must state “Less Contacts” Cannon Nomenclature KJL 6 T 17 B 35 S N SERIES PREFIX SHELL STYLE CLASS SHELL SIZE HARDWARE FINISH CONTACT ARRANGEMENT SERIES PREFIX KJL - Series I-Scoop proof SHELL STYLE 0 - Wall mounting receptacle 3 - Wall mounting receptacle (back panel mounting) 4 - Thru bulkhead receptacle* 5 - Box mounting receptacle (back panel mounting) 6 - Straight plug, grounded 7 - Jam nut receptacle CLASS E - Inactive for new design. Superseded by Class T. G - Environmental resistant - Space Grade F - Environment - resistant with strain relief accessory P - Environment - resistant with straight potting cup accessory T - Environment - resistant (without rear accessory) (Class T not applicable to KJL5) CONTACT STYLE POLARIZING POSITION MODIFICATION CODE SHELL SIZE 9,11,13,15,17,19,21,23 and 25 CONTACT ARRANGEMENT See pages 22 and 23. HARDWARE FINISH STANDARD A - Bright cadmium over electroless nickel plate, -85ºF to +302ºF (-65ºC to +150ºC) B - Olive drab cadmium over electroless nickel plate, -85ºF to +347ºF (-65ºC to + 175ºC) N - Electroless nickel, -85ºF to +392ºF (-65ºC to +200ºC) Z - Zinc Nickel, Black - - (Dash) When using a finish modification code CONTACT STYLE P - Pin S - Socket PS - Pin-Socket (Shell style 4 only) *Consult factory for availability POLARIZING POSITION N (normal), A, B, C, D. See page 21. MODIFICATION CODE L Less contacts, not stamped on connector 16 - Outgassed NASA space graded connector 17 - Clinch Nuts installed 4-40 Size 9-21, 6-32 Size 23-25) 27 - Outgassed, standard connector A296 - Black Zinc Cobalt, RoHS Compliant *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 6 Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com 38999-Style Series I Connectors* Wall Mounting Receptacle KJL0 MS27466-Style (MS service class E, P, T) POLARIZING KEYWAY J DIA. MAX. M 1.240 (31.50) MAX. L N H T THREAD A P DIA. BLUE BAND (INDICATES REAR RELEASE CONTACT RETENTION SYSTEM) NOTE: For backshell dimensions and configurations, see pages 29 and 31. Overall Length With Backshells Shell Size 9 11 13 15 17 19 21 23 25 A Dia. Max. .573 (14.55) .701 (17.81) .851 (21.62) .976 (24.79) 1.101 (27.97) 1.208 (30.68) 1.333 (33.86) 1.458 (37.03) 1.583 (40.21) H Max. .100 (2.54) .100 (2.54) .100 (2.54) .100 (2.54) .100 (2.54) .100 (2.54) .130 (3.30) .130 (3.30) .130 (3.30) J Dia. Max. .662 (16.81) .810 (20.57) .960 (24.38) 1.085 (27.56) 1.210 (30.73) 1.317 (33.45) 1.442 (36.63) 1.567 (39.80) 1.692 (42.98) L Max. .632 (16.05) .632 (16.05) .632 (16.05) .632 (16.05) .632 (16.05) .632 (16.05) .602 (15.29) .602 (15.29) .602 (15.29) M Max. .958 (24.33) 1.051 (26.70) 1.145 (29.08) 1.239 (31.47) 1.332 (33.83) 1.458 (37.03) 1.582 (40.18) 1.708 (43.38) 1.832 (46.53) N T.P. .719 (18.26) .812 (20.62) .906 (23.01) .969 (24.61) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.375 (34.93) 1.500 (38.10) P Dia. Max. .138 (3.51) 138 (3.51) .138 (3.51) .138 (3.51) .138 (3.51) .138 (3.51) .138 (3.51) .157 (3.99) .157 (3.99) T Thread 7/16-28UNEF-2A 9/16-24UNEF-2A 11/16-24UNEF-2A 13/16-20UNEF-2A 15/16-20UNEF-2A 1-1/16-18UNEF-2A 1-3/16-18UNEF-2A 1-5/16-18UNEF-2A 1-7/16-18UNEF-2A F Cable Clamp 1.846 (46.89) 1.846 (46.89) 1.846 (46.89) 1.846 (46.89) 1.966 (49.94) 1.966 (50.70) 1.966 (50.70) 1.966 (50.70) 1.966 (50.70) P Potting Max. 1.451 (36.86) 1.451 (36.86) 1.451 (36.86) 1.451 (36.86) 1.451 (36.86) 1.451 (36.86) 1.451 (36.86) 1.451 (36.86) 1.451 (36.86) Wall Mounting Receptacle (Back Panel) MS27656-Style (MS service class E, P, T) KJL3 J DIA. MAX. M 1.247 (31.67) MAX. L POLARIZING KEYWAY N H T THREAD A P DIA. BLUE BAND (INDICATES REAR RELEASE CONTACT RETENTION SYSTEM) E MAX. PANEL THICKNESS (including mounting hardware) NOTE: For backshell dimensions and configurations, see pages 29 and 31. Shell Size A Dia. Max. E Max. H Max. J Dia. Max. L Max. M Max. N T.P. P Dia. Max. 9 11 13 15 17 19 21 23 25 .573 (14.55) .701 (17.81) .851 (21.62) .976 (24.79) 1.101 (27.97) 1.208 (30.68) 1.333 (33.86) 1.458 (37.03) 1.583 (40.21) .234 (5.94) .234 (5.94) .234 (5.94) .234 (5.94) .234 (5.94) .234 (5.94) .204 (5.18) .204 (5.18) .193 (4.90) .100 (2.54) .100 (2.54) .100 (2.54) .100 (2.54) .100 (2.54) .100 (2.54) .130 (3.30) .130 (3.30) .130 (3.30) .662 (16.81) .810 (20.57) .960 (24.38) 1.085 (27.56) 1.210 (30.73) 1.317 (33.45) 1.442 (36.63) 1.567 (39.80) 1.692 (42.98) .820 (20.83) .820 (20.83) .820 (20.83) .820 (20.83) .820 (20.83) .820 (20.83) .790 (20.07) .790 (20.07) .790 (20.07) .958 (24.33) 1.051 (26.70) 1.145 (29.08) 1.239 (31.47) 1.332 (33.83) 1.458 (37.03) 1.582 (40.18) 1.708 (43.38) 1.832 (46.53) .719 (18.26) .812 (20.62) .906 (23.01) .969 (24.61) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.375 (34.93) 1.500 (38.10) .138 (3.51) 138 (3.51) .138 (3.51) .138 (3.51) .138 (3.51) .138 (3.51) .138 (3.51) .157 (3.99) .157 (3.99) T Thread 7/16-28UNEF-2A 9/16-24UNEF-2A 11/16-24UNEF-2A 13/16-20UNEF-2A 15/16-20UNEF-2A 1-1/16-18UNEF-2A 1-3/16-18UNEF-2A 1-5/16-18UNEF-2A 1-7/16-18UNEF-2A Overall Length With Backshells F P Cable Clamp Potting Max. 1.805 (45.85) 1.805 (45.85) 1.805 (45.85) 1.805 (45.85) 1.935 (48.90) 1.955 (49.66) 1.955 (49.66) 1.955 (49.66) 1.955 (49.66) 1.410 (35.81) 1.410 (35.81) 1.410 (35.81) 1.410 (35.81) 1.410 (35.81) 1.410 (35.81) 1.410 (35.81) 1.410 (35.81) 1.410 (35.81) Performance Specifications-Pages 3 and 4. Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31, and 32. Contact Arrangements - Pages 22 and 23. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 7 38999-Style Series I Connectors* Box Mounting Receptacle (Back Panel) MS27505E-Style (MS service class E) KJL5E L K MAX. H M .060 (1.52) MAX. GROMMET POLARIZING KEYWAY J DIA. MAX. A N P DIA. BLUE BAND (INDICATES REAR RELEASE CONTACT RETENTION SYSTEM) E MAX. PANEL THICKNESS (INCLUDING MOUNTING HARDWARE) NOTE: This connector does not accommodate backshells. Shell Size 9 11 13 15 17 19 21 23 25 A Dia. Max. .573 (14.55) .701 (17.81) .851 (21.62) .976 (24.79) 1.101 (27.97) 1.208 (30.68) 1.333 (33.86) 1.458 (37.03) 1.583 (40.21) E Max. .234 (5.94) .234 (5.94) .234 (5.94) .234 (5.94) .234 (5.94) .234 (5.94) .204 (5.18) .204 (5.18) .193 (4.90) H Max. .100 (2.54) .100 (2.54) .100 (2.54) .100 (2.54) .100 (2.54) .100 (2.54) .130 (3.30) .130 (3.30) .130 (3.30) J Dia. Max. .662 (16.81) .810 (20.57) .960 (24.38) 1.085 (27.56) 1.210 (30.73) 1.317 (33.45) 1.442 (36.63) 1.567 (39.80) 1.692 (42.98) K Max. .219 (5.56) .219 (5.56) .219 (5.56) .219 (5.56) .219 (5.56) .219 (5.56) .250 (6.35) .250 (6.35) .250 (6.35) L Max. .820 (20.83) .820 (20.83) .820 (20.83) .820 (20.83) .820 (20.83) .820 (20.83) .790 (20.07) .790 (20.07) .790 (20.07) M Max. .958 (24.33) 1.051 (26.70) 1.145 (29.08) 1.239 (31.47) 1.332 (33.83) 1.458 (37.03) 1.582 (40.18) 1.708 (43.38) 1.832 (46.53) N T.P. .719 (18.26) .812 (20.62) .906 (23.01) .969 (24.61) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.375 (34.93) 1.500 (38.10) P Dia. Max. .138 (3.51) 138 (3.51) .138 (3.51) .138 (3.51) .138 (3.51) .138 (3.51) .138 (3.51) .157 (3.99) .157 (3.99) Straight Plug Grounded MS2746-Style (MS service class E, P, T) KJL6 L POLARIZING KEYWAY J DIA. T THREAD A DIA. G DIA. MAX. BLUE BAND (INDICATES REAR RELEASE CONTACT RETENTION SYSTEM) NOTE: For backshell dimensions and configurations, see pages 29 and 31. Shell Size A Max. G Dia. Max. J Dia. Max. (Class T) L Max. T Thread 9 11 13 15 17 19 21 23 25 .585 (14.86) .717 (18.21) .866 (22.00) .990 (25.15) 1.115 (28.32) 1.222 (31.04) 1.347 (34.21) 1.472 (37.39) 1.597 (40.56) .859 (21.82) .984 (24.99) 1.156 (29.36) 1.281 (32.54) 1.406 (35.71) 1.516 (38.51) 1.641 (41.68) 1.766 (44.86) 1.891 (48.03) .483 (12.27) .611 (15.52) .760 (19.30) .885 (22.48) 1.010 (25.65) 1.115 (28.32) 1.240 (31.50) 1.365 (34.67) 1.490 (37.85) 1.234 (31.34) 1.234 (31.34) 1.234 (31.34) 1.234 (31.34) 1.234 (31.34) 1.234 (31.34) 1.234 (31.34) 1.234 (31.34) 1.234 (31.34) 7/16-28UNEF-2A 9/16-24UNEF-2A 11/16-24UNEF-2A 13/16-20UNEF-2A 15/16-20UNEF-2A 1-1/16-18UNEF-2A 1-3/16-18UNEF-2A 1-5/16-18UNEF-2A 1-7/16-18UNEF-2A Overall Length With Backshells F P Cable Clamp Potting Max. 1.793 (45.54) 1.793 (45.54) 1.793 (45.54) 1.793 (45.54) 1.913 (48.59) 1.943 (49.35) 1.943 (49.35) 1.943 (49.35) 1.943 (49.35) 1.671 (42.44) 1.671 (42.44) 1.671 (42.44) 1.671 (42.44) 1.671 (42.44) 1.671 (42.44) 1.766 (44.86) 1.766 (44.86) 1.766 (44.86) Performance Specifications-Pages 3 and 4. Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31 and 32. Contact Arrangements - Pages 22 and 23. *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 8 Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com 38999-Style Series I Connectors* Jam Nut Receptacle MS27468-Style (MS service class E,P,T) KJL7 .125 (3.18) MAX. .062 (1.57) MIN. PANEL THICKNESS .920 (23.37) MAX. U MAX. HEX H POLARIZING KEYWAY T THREAD J DIA. D A DIA. DIA. BLUE BAND (INDICATES REAR RELEASE CONTACT RETENTION SYSTEM) S V THREAD NOTE: For backshell dimensions and configurations, see pages 29 and 31. Overall Length With Backshells Shell Size 9 11 13 15 17 19 21 23 25 A Dia. Max. .573 (14.55) .701 (17.81) .851 (21.62) .976 (24.79) 1.101 (27.97) 1.208 (30.68) 1.333 (33.86) 1.458 (37.03) 1.583 (40.21) H D Max. Max. .655 (16.64) .120 (3.05) .755 (19.18) .120 (3.05) .942 (23.93) .120 (3.05) 1.066 (27.08) .120 (3.05) 1.191 (30.25) .120 (3.05) 1.316 (33.43) .151 (3.84) 1.441 (36.60) .151 (3.84) 1.566 (39.78) .151 (3.84) 1.691 (42.95) .151 (3.84) J Dia. Max. .662 (16.81) .810 (20.57) .960 (24.38) 1.085 (27.56) 1.210 (30.73) 1.317 (33.45) 1.442 (36.63) 1.567 (39.80) 1.692 (42.98) S Dia. Max. 1.204 (30.58) 1.391 (35.33) 1.516 (35.51) 1.641 (41.68) 1.766 (44.86) 1.954 (49.63) 2.078 (52.78) 2.204 (55.98) 2.328 (59.13) T Thread 7/16-28UNEF-2A 9/16-24UNEF-2A 11/16-24UNEF-2A 13/16-20UNEF-2A 15/16-20UNEF-2A 1-1/16-18UNEF-2A 1-3/16-18UNEF-2A 1-5/16-18UNEF-2A 1-7/16-18UNEF-2A U Max. Hex. .892 (22.66) 1.017 (25.83) 1.205 (30.61) 1.329 (33.76) 1.455 (36.96) 1.579 (40.11) 1.705 (43.31) 1.829 (46.46) 20.17 (51.23) V Thread Class 2A 11/16-24UNEF 13/16-24UNEF 1-20UNEF 1-1/8-18UNEF 1-1/4-18UNEF 1-3/8-18UNEF 1-1/2-18UNEF 1-5/8-18UNEF 1-3/4-18UNS F Cable Clamp 1.846 (46.89) 1.846 (46.89) 1.846 (46.89) 1.846 (46.89) 1.966 (49.94) 1.996 (50.70) 1.996 (50.70) 1.996 (50.70) 1.996 (50.70) P Potting Max. 1.451 (36.86) 1.451 (36.86) 1.451 (36.86) 1.451 (36.86) 1.451 (36.86) 1.451 (36.86) 1.451 (36.86) 1.451 (36.86) 1.451 (36.86) Performance Specifications-Pages 3 and 4. Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31, and 32. Contact Arrangements - Pages 22, 23. Panel Cutouts Jam Nut Receptacles Flange Mounted Receptacles P ± .005 (0.13) 4 HOLES A R (T.P) B A +.010 (0.25) -.000 (0.00) Shell Size 9 11 13 15 17 19 21 23 25 A Dia. .665 (16.89) .812 (20.62) .965 (24.51) 1.085 (27.55) 1.250 (31.75) 1.322 (33.57) 1.447 (36.75) 1.569 (39.85) 1.703 (43.25) Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com (Class T) P Dia. R Mtg. Screw .128 (3.25) .128 (3.25) .128 (3.25) .128 (3.25) .128 (3.25) .128 (3.25) .128 (3.25) .154 (3.91) .150 (3.81) .719 (18.26) .812 (20.62) .906 (23.01) .969 (24.61) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.375 (34.93) 1.500 (38.10) #4 #4 #4 #4 #4 #4 #4 #6 #6 Shell Size 9 11 13 15 17 19 21 23 25 A +.010 (.25) -.000 (.00) .700 (17.78) .825 (20.96) 1.010 (25.65) 1.135 (28.83) 1.260 (32.00) 1.385 (35.18) 1.510 (38.35) 1.635 (41.53) 1.760 (44.70) *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 9 B +.000 (.00) -.010 (.25) .670 (17.02) .771 (19.58) .955 (24.26) 1.085 (27.56) 1.210 (30.73) 1.335 (33.91) 1.460 (37.08) 1.585 (40.26) 1.710 (43.43) 38999-Style Series II Connectors* How To Order Military Nomenclature DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. MS27473-Style T 18 F 35 S MS NUMBER SHELL STYLE CLASS SHELL SIZE HARDWARE FINISH MS NUMBER SHELL STYLE MS27472 - Wall Mounting Receptacle MS27473 - Straight Plug MS27474 - Jam Nut Receptacle MS27484 - Grounded Plug MS27497 - Wall Mounting Receptacle (back panel mounting) MS27513 - Box Mounting Receptacle MS27499 - Box Mounting Receptacle (Class E) MS27508 - Box Mounting (back panel mounting) (Class E) CLASS E - Environment - resistant with rear accessory (without strain relief) G - Environmental - resistant wall mount and jam nut receptacle and plug types. Space Grade. P - Enironment - resistant with straight potting cup accessories T - Environment - resistant (without rear accessory). (Class T not applicable to MS27499, MS27513, and MS27508.) CONTACT ARRANGEMENT CONTACT STYLE POLARIZING POSITION SHELL SIZE 8, 10, 12, 14, 16, 18, 20, 22, 24. CONTACT ARRANGEMENT See pages 22 and 23. HARDWARE FINISH STANDARD A - Bright cadmium over electroless nickel plate, 85ºF to + 302ºF (- 65ºC to + 150ºC) B - Olive drab cadmium over electoless nickel plate, - 85ºF to + 347ºF (- 65ºC to + 175ºC) F - Electroless nickel, - 85ºF to + 392ºF (-65ºC to + 200ºC) CONTACT STYLE P - Pin S - Socket *A - Less Pin Contact *B - Less Socket Contact *Used only when other than power contacts are to be installed (i.e. shielded, thermocouple, etc.) POLARIZING POSITION A, B, C, and D (no letter required for normal). See page 21. Note: T  o order MS connectors less standard power contacts, purchase order must state “Less Contacts”. ITT Nomenclature KJ 6 T 18 N 35 S N SERIES PREFIX SHELL STYLE CLASS SHELL SIZE SERIES PREFIX KJ - Series II - Low Profile SHELL STYLE 0 - Wall mounting receptacle 2 - Box mounting receptacle 3 - Wall mounting receptacle (back panel mounting) 5 - Box mounting receptacle (back panel mounting) 6 - Straight plug G6 - Straight plug, grounded 7 - Jam nut receptacle CLASS E - Environment - resistant with rear accessory (without strain relief) F - Environment - resistant with strain relief acccessory G - Environmental - resistant wall mount and jam nut receptacle and plug type. Space Grade. P - Environment - resistant with straight potting cup accessory R - Environment - resistant with full grommet seal without rear accessory; shell styles 2 and 5 only T - Environment - resistant (without rear accessory). (Class T not applicable to KJ2E, KJ2R, KJ5E and KJ5R.) HARDWARE FINISH CONTACT ARRANGEMNT CONTACT STYLE POLARIZING POSITION MODIFICATION CODE Note KJ supplied with exact complement of contacts. SHELL SIZE 8, 10, 12, 14, 16, 18, 20, 22, and 24. CONTACT ARRANGMENT See pages 22 and 23. HARDWARE FINISH STANDARD A - Bright cadmium over electroless nickel plate, 85ºF to + 302ºF (- 65ºC to + 150ºC) B - Olive drab cadmium over electroless nickel plate, - 85ºF to + 347ºF (- 65ºC to + 175˚C) N - Electroless nickel, - 85ºF to + 392ºF (-65ºC to + 200ºC) Z - Zinc Nickel, Black - - (Dash) When using a finish modification code CONTACT STYLE P - Pin S - Socket POLARIZING POSITION N (normal), A, B, C, D, see page 21. MODIFICATION CODE L Less contacts, not stamped on connector 16 - Outgassed NASA space graded connector 17 - Clinch Nuts installed (4-40 Size 9-21) 27 - Outgassed, standard connector A296 - Black ZInc Cobalt, RoHS Compliant *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 10 Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com 38999-Style Series II Connectors* Wall Mounting Receptacle KJ0 MS27472-Style (MS service class E, P, T) POLARIZING KEYWAY .322 (8.17) MAX. T THREAD J MAX. M A DIA. N P DIA. .069 (1.74) MAX. BLUE BAND (INDICTATES REAR RELEASE CONTACT RETENTION SYSTEM) NOTE: For backshell dimensions and configurations, see pages 29 and 31. Shell Size 8 10 12 14 16 18 20 22 24 A Dia. Max. .474 (12.04) .591 (15.01) .751 (19.08) .876 (22.25) 1.001 (25.43) 1.126 (28.60) 1.251 (31.78) 1.376 (34.95) 1.501 (38.13) J Dia. Max. .563 (14.30) .680 (17.27) .859 (21.82) .984 (24.99) 1.108 (28.14) 1.233 (31.32) 1.358 (34.49) 1.483 (37.67) 1.610 (40.89) M Max. .828 (21.03) .954 (24.23) 1.047 (26.59) 1.141 (28.98) 1.234 (31.34) 1.328 (33.73) 1.453 (36.91) 1.578 (39.08) 1.703 (43.26) P N +.005 (0.13) T.P -.010 (0.25) .594 (15.09) .125 (3.18) .719 (18.26) .125 (3.18) .812 (20.62) .125 (3.18) .906 (23.01) .125 (3.18) .969 (24.61) .125 (3.18) 1.062 (26.97) .125 (3.18) 1.156 (27.36) .125 (3.18) 1.250 (31.76) .125 (3.18) 1.375 (34.92) .152 (3.86) Overall length With Backshells T Thread 7/16-28UNEF-2A 9/16-24UNEF-2A 11/16-24UNEF-2A 13/16-20UNEF-2A 15/16-20UNEF-2A 1-1/16-18UNEF-2A 1-3/16-18UNEF-2A 1-5/16-18UNEF-2A 1-7/16-18UNEF-2A E Straight .850 (21.59) .850 (21.59) .850 (21.59) .850 (21.59) .850 (21.59) .850 (21.59) .850 (21.59) .850 (21.59) .850 (21.59) F Cable Clamp 1.555 (39.50) 1.555 (39.50) 1.555 (39.50) 1.790 (45.47) 1.790 (45.47) 1.790 (45.47) 1.790 (45.47) 1.930 (49.02) 1.900 (48.26) P Potting Max. 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.080 (27.43) Box Mounting Receptacle KJ2E MS27499E-Style (MS service class E) L POLARIZING KEYWAY .322 (8.17) MAX. J MAX. M G DIA. A DIA. N P DIA. BLUE BAND (INDICTATES REAR RELEASE CONTACT RETENTION SYSTEM) .069 (1.74) MAX. NOTE: This connector does not accommodate backshells Shell Size A Dia. Max. G Dia. Max. J Dia. Max. L Max. M Max. N T.P. 8 10 12 14 16 18 20 22 24 .474 (12.04) .591 (15.01) .751 (19.08) .876 (22.25) 1.001 (25.43) 1.126 (28.60) 1.251 (31.78) 1.376 (33.95) 1.501 (38.13) .421 (10.69) .542 (13.77) .667 (16.94) .791 (20.09) .916 (23.27) 1.034 (26.26) 1.158 (29.41) 1.283 (32.59) 1.408 (35.76) .563 (14.30) .680 (17.27) .859 (21.82) .984 (24.99) 1.108 (28.14) 1.233 (31.32) 1.358 (34.49) 1.483 (37.67) 1.610 (40.89) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .312 (7.92) .828 (21.03) .954 (24.23) 1.047 (26.59) 1.141 (28.98) 1.234 (31.34) 1.328 (33.73) 1.453 (36.81) 1.578 (40.08) 1.703 (43.26) .594 (15.09) .719 (18.26) .812 (20.62) .906 (23.01) .969 (24.61) 1.062 (26.97) 1.156 (27.36) 1.250 (31.75) 1.375 (34.93) Performance Specifications-Pages 3 and 4. Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31, and 32. Contact Arrangements - Pages 22 and 23. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 11 P +.005 (0.13) -.010 (0.25) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .152 (3.86) 38999-Style Series II Connectors* MS27513E (MS service class E) KJ2R MS27513E-Style (MS service class E) KJ2R Box Mounting Receptacle .463 (11.76) MAX. .463 (11.76) MAX. L .322 (8.17) MAX. L .322 (8.17) MAX. POLARIZING KEYWAY POLARIZING KEYWAY J MAX. A DIA. A DIA. BLUE BAND (INDICATES REAR RELEASE CONTACT BLUE BAND SYSTEM) RETENTION (INDICATES REAR RELEASE CONTACT RETENTION SYSTEM) G DIA. M N G DIA. M N J MAX. .069 (1.74) MAX. P DIA. .069 (1.74) MAX. P DIA. NOTE: This connector does not accommodate backshells Shell Size A Dia. Max. 8 Shell Size 10 8 12 10 14 12 16 14 18 16 20 18 22 20 24 22 24 .474 (12.04) A Dia.(15.01) Max. .591 .421 (10.69) G Dia.(13.77) Max. .542 .563 (14.30) J Dia.(17.27) Max. .680 .474 .751 (12.04) (19.08) .591 .876 (15.01) (22.25) .751 (19.08) 1.001 (25.43) .876 (22.25) 1.126 (28.60) 1.001 1.251 (25.43) (31.78) 1.126 1.376 (28.60) (33.95) 1.251 1.501 (31.78) (38.13) 1.376 (33.95) 1.501 (38.13) .421 .667 (10.69) (16.94) .542 .791 (13.77) (20.09) .667 .916 (16.94) (23.27) .791 (20.09) 1.034 (26.26) .916 (23.27) 1.158 (29.41) 1.034 1.283 (26.26) (32.59) 1.158 1.408 (29.41) (35.76) 1.283 (32.59) 1.408 (35.76) .563 .859 (14.30) (21.82) .680 .984 (17.27) (24.99) .859 (21.82) 1.108 (28.14) .984 (24.99) 1.233 (31.32) 1.108 1.358 (28.14) (34.49) 1.233 1.483 (31.32) (27.67) 1.358 1.610 (34.49) (40.89) 1.483 (27.67) 1.610 (40.89) G NOTE: This connector J L M does not accommodate backshells Dia. Max. Dia. Max. Max. Max. .312 (7.92) L .312Max. (7.92) .312 .312 (7.92) (7.92) .312 .312 (7.92) (7.92) .312 .312 (7.92) (7.92) .312 .312 (7.92) (7.92) .312 .312 (7.92) (7.92) .312 .312 (7.92) (7.92) .312 .312 (7.92) (7.92) .312 (7.92) .312 (7.92) Wall Mounting Receptacle P +.005 (0.13) -.010 (0.25) P .125 (3.18) +.005 (0.13) -.010(3.18) (0.25) .125 N T.P. .594 (15.09) N .719T.P. (18.26) .594 .812 (15.09) (20.62) .719 .906 (18.26) (23.01) .812 .969 (20.62) (24.61) .906 (26.97) (23.01) 1.062 .969 (27.36) (24.61) 1.156 1.062 1.250 (26.97) (31.75) 1.156 (34.93) (27.36) 1.375 1.250 (31.75) 1.375 (34.93) .828 (21.03) M .954Max. (24.23) .828 (21.03) 1.047 (26.59) .954 (24.23) 1.141 (28.98) 1.047 1.234 (26.59) (31.34) 1.141 1.328 (28.98) (33.73) 1.234 1.453 (31.34) (36.81) 1.328 1.578 (33.73) (40.08) 1.453 1.703 (36.81) (43.26) 1.578 (40.08) 1.703 (43.26) .125 .125 (3.18) (3.18) .125 (3.18) .125 (3.18) .125 .125 (3.18) (3.18) .125 .125 (3.18) (3.18) .125 (3.18) (3.18) .125 .125 .125 (3.18) (3.18) .125 (3.85) (3.18) .152 .125 (3.18) .152 (3.85) KJ3 MS27497-Style (MS service class E, P, T) .142 (3.01) MAX. PANEL THICKNESS (including mounting hardware) .477 (11.35) MAX. P DIA. T THREAD .322 (8.17) MAX. POLARIZING KEYWAY J DIA. A DIA. C DIA. M BLUE BAND (INDICATES REAR RELEASE CONTACT RETENTION SYSTEM) N .069 (1.74) MAX. NOTE: For backshell dimensions and configurations, see pages 29 and 31. Shell Size 8 10 12 14 16 18 20 22 24 A Dia. Max. .474 (12.04) .591 (15.01) .751 (19.08) .876 (22.25) 1.001 (25.43) 1.126 (28.60) 1.251 (31.78) 1.376 (34.95) 1.501 (38.13) C Dia. Max. .522 (13.26) .639 (16.23) .808 (20.52) .935 (23.75) 1.058 (26.87) 1.183 (30.05) 1.308 (33.22) 1.433 (36.40) 1.568 (39.83) J Dia. Max. .563 (14.30) .680 (17.27) .859 (21.82) .984 (24.99) 1.108 (28.14) 1.233 (31.32) 1.358 (34.49) 1.483 (37.67) 1.610 (40.89) M Max. .828 (21.03) .954 (24.23) 1.047 (26.59) 1.141 (28.98) 1.234 (31.34) 1.328 (33.73) 1.453 (36.91) 1.578 (40.08) 1.703 (43.26) N T.P .594 (15.09) .719 (18.26) .812 (20.62) .906 (23.01) .969 (24.61) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.375 (34.93) P T +.005 (0.13) Thread -.010 (0.25) .125 (3.18) 7/16-28UNEF-2A .125 (3.18) 9/16-24UNEF-2A .125 (3.18) 11/16-24UNEF-2A .125 (3.18) 13/16-20UNEF-2A .125 (3.18) 15/16-20UNEF-2A .125 (3.18) 1-1/16-18UNEF-2A .125 (3.18) 1-3/16-18UNEF-2A .125 (3.18) 1-5/16-18UNEF-2A .152 (3.86) 1-7/16-18UNEF-2A Overall Length With Backshells E Straight .855 (21.72) .855 (21.72) .855 (21.72) .855 (21.72) .855 (21.72) .855 (21.72) .855 (21.72) .855 (21.72) .855 (21.72) F Cable Clamp 1.570 (39.88) 1.570 (39.88) 1.570 (39.88) 1.780 (45.21) 1.780 (45.21) 1.780 (45.21) 1.780 (45.21) 1.960 (49.78) 1.960 (49.78) P Potting Max. 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.020 (25.91) 1.080 (27.43) Performance Specifications-Pages 3 and 4. Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31, and 32. Contact Arrangements - Pages 22 and 23. *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 12 Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com 38999-Style Series II Connectors* Box Mounting Receptacle (Back Panel) MS27508E (MS service class E) MS27508E-Style (MS service class E) KJ5E L KJ5E L .447 (11.35) MAX. P DIA. .447 (11.35) .322 (8.17)MAX. MAX. P DIA. .322 (8.17) MAX. C A C A G DIA. G DIA. BLUE BAND (INDICATES REAR RELEASE CONTACT BLUE BAND RETENTION SYSTEM) (INDICATES REAR RELEASE CONTACT RETENTION SYSTEM) M N M N POLARIZING KEYWAY POLARIZING KEYWAY J DIA. J DIA. .069 (1.74) MAX. K MAX. PANEL THICKNESS (including mounting hardware) .069 (1.74) MAX. K MAX. PANEL THICKNESS (including mounting hardware) NOTE: This connector does not accommodate backshells Shell Size Shell 8 Size 10 8 12 10 14 12 16 14 18 16 20 18 22 20 24 22 24 A Dia. Max. A .474 (12.04) Dia. Max. .591 (15.01) .474 (12.04) .751 (19.08) .591 (15.01) .876 (22.25) .751 (19.08) 1.001 (25.42) .876 (22.25) 1.126 (28.60) 1.001 (25.42) 1.251 (31.77) 1.126 (28.60) 1.376 (34.95) 1.251 (31.77) 1.501 (38.13) 1.376 (34.95) 1.501 (38.13) C Dia. Max. C .522 (13.26) Dia. Max. .639 (16.23) .522 (13.26) .808 (20.52) .639 (16.23) .935 (23.75) .808 (20.52) 1.058 (26.87) .935 (23.75) 1.183 (30.05) 1.058 (26.87) 1.308 (33.22) 1.183 (30.05) 1.433 (36.40) 1.308 (33.22) 1.568 (39.83) 1.433 (36.40) 1.568 (39.83) does not M J K accommodateL backshells G NOTE: This connector Max. Dia. Max. Max. Max. Dia. Max. J G .147K(3.73) .563 (14.30) .185L(4.70) .828M(21.03) .421 (10.69) Max. Dia. Max. Max. Max. Dia. Max. .152 (3.86) .680 (17.27) .185 (4.70) .954 (24.23) .542 (13.77) .147 (3.73) .563 (14.30) .185 (4.70) .828 (21.03) .421 (10.69) .152 (3.86) .859 (21.82) .185 (4.70) 1.047 (26.59) .667 (16.94) .152 (3.86) .680 (17.27) .185 (4.70) .954 (24.23) .542 (13.77) .152 (3.86) .984 (24.99) .185 (4.70) 1.141 (28.98) .791 (20.09) .152 (3.86) .859 (21.82) .185 (4.70) 1.047 (26.59) .667 (16.94) .152 (3.86) 1.108 (28.14) .185 (4.70) 1.234 (31.24) .916 (23.27) .152 (3.86) .984 (24.99) .185 (4.70) 1.141 (28.98) .791 (20.09) .152 (3.86) 1.233 (31.32) .185 (4.70) 1.328 (33.73) 1.034 (31.34) .152 (3.86) 1.108 (28.14) .185 (4.70) 1.234 (31.24) .916 (23.27) .179 (4.55) 1.358 (34.49) .185 (4.70) 1.453 (36.91) 1.158 (34.52) .152 (3.86) 1.233 (31.32) .185 (4.70) 1.328 (33.73) 1.034 (31.34) .179 (4.55) 1.483 (37.67) .185 (4.70) 1.578 (40.08) 1.283 (32.59) .179 (4.55) 1.358 (34.49) .185 (4.70) 1.453 (36.91) 1.158 (34.52) .169 (4.29) 1.610 (40.89) .185 (4.70) 1.703 (43.66) 1.408 (35.76) .179 (4.55) 1.483 (37.67) .185 (4.70) 1.578 (40.08) 1.283 (32.59) .169 (4.29) 1.610 (40.89) .185 (4.70) 1.703 (43.66) 1.408 (35.76) Box Mounting Receptacle (Back Panel) No MS part number KJ5R No MS part number KJ5R N T.P N .594 (15.09) T.P .719 (18.26) .594 (15.09) .812 (20.62) .719 (18.26) .906 (23.01) .812 (20.62) .969 (24.61) .906 (23.01) 1.062 (26.97) .969 (24.61) 1.156 (29.36) 1.062 (26.97) 1.250 (31.75) 1.156 (29.36) 1.375 (34.92) 1.250 (31.75) 1.375 (34.92) P +.005 (0.13) -.010P(0.25) +.005(3.18) (0.13) .125 -.010 (0.25) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .152 (3.86) .125 (3.18) .152 (3.86) L .447 (11.35) MAX. .322(11.35) (8.17) MAX. MAX. .447 .322 (8.17) MAX. L .338 (8.58) MAX. .338 (8.58) MAX. C A G DIA. C A G DIA. BLUE BAND (INDICATES REAR RELEASE CONTACT BLUE BAND RETENTION SYSTEM) (INDICATES REAR RELEASE CONTACT RETENTION SYSTEM) P DIA. POLARIZING KEYWAY P DIA. POLARIZING KEYWAY J DIA. M N J DIA. M N .069 (1.74) MAX. K MAX. PANEL .069 (1.74) MAX.THICKNESS (including mounting hardware) K MAX. PANEL THICKNESS (including mounting hardware) NOTE: This connector does not accommodate backshells backshells Shell A M N J does not accommodate K L GNOTE: This connector C Size Dia. Max. Max. T.P Dia. Max. Max. Max. Dia. Max. Dia. Max. Shell A M J K L G C .594 N (15.09) 8 .474 (12.04) .563 (14.30) .828 (21.03) .147 (3.73) .185 (4.70) .421 (10.69) .522 (13.26) Size Dia. Max. Max. T.P Dia. Max. Max. Max. Dia. Max. Dia. Max. .719 (18.26) 10 .591 (15.01) .680 (17.27) .954 (24.23) .152 (3.86) .185 (4.70) .542 (13.77) .639 (16.23) .594 (15.09) 8 .474 (12.04) .563 (14.30) .828 (21.03) .147 (3.73) .185 (4.70) .421 (10.69) .522 (13.26) .812 (20.62) 12 .751 (19.08) .859 (21.82) 1.047 (26.59) .152 (3.86) .185 (4.70) .667 (16.94) .808 (20.52) .719 (18.26) 10 .591 (15.01) .680 (17.27) .954 (24.23) .152 (3.86) .185 (4.70) .542 (13.77) .639 (16.23) .906 (23.01) 14 .876 (22.25) .984 (24.99) 1.141 (28.98) .152 (3.86) .185 (4.70) .791 (20.09) .935 (23.75) .812 (20.62) 12 .751 (19.08) .859 (21.82) 1.047 (26.59) .152 (3.86) .185 (4.70) .667 (16.94) .808 (20.52) .969 (24.61) 16 1.001 (25.42) 1.108 (28.14) 1.234 (31.24) .152 (3.86) .185 (4.70) .916 (23.27) 1.058 (26.87) .906 (23.01) 14 .876 (22.25) .984 (24.99) 1.141 (28.98) .152 (3.86) .185 (4.70) .791 (20.09) .935 (23.75) 1.062 (26.97) 18 1.126 (28.60) 1.233 (31.32) 1.328 (33.73) .152 (3.86) .185 (4.70) 1.034 (31.34) 1.183 (30.05) .969 (24.61) 16 1.001 (25.42) 1.108 (28.14) 1.234 (31.24) .152 (3.86) .185 (4.70) .916 (23.27) 1.058 (26.87) 1.156 (29.36) 20 1.251 (31.77) 1.358 (34.49) 1.453 (36.91) .179 (4.55) .185 (4.70) 1.158 (34.52) 1.308 (33.22) 1.062 (26.97) 18 1.126 (28.60) 1.233 (31.32) 1.328 (33.73) .152 (3.86) .185 (4.70) 1.034 (31.34) 1.183 (30.05) 1.250 (31.75) 22 1.376 (34.95) 1.483 (37.67) 1.578 (40.08) .179 (4.55) .185 (4.70) 1.283 (32.59) 1.433 (36.40) 1.156 (29.36) 20 1.251 (31.77) 1.358 (34.49) 1.453 (36.91) .179 (4.55) .185 (4.70) 1.158 (34.52) 1.308 (33.22) 1.375 (34.92) 24 1.501 (38.13) 1.610 (40.89) 1.703 (43.66) .169 (4.29) .185 (4.70) 1.408 (35.76) 1.568 (39.83) 1.250 (31.75) 22 1.376 (34.95) 1.483 (37.67) 1.578 (40.08) .179 (4.55) .185 (4.70) 1.283 (32.59) 1.433 (36.40) Performance Specifications-Pages 3 and 4. 1.375 (34.92) 24 1.501 (38.13) 1.610 (40.89) 1.703 (43.66) .169 (4.29) .185 (4.70) 1.408 (35.76) 1.568 (39.83) Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31, and 32. Performance Specifications-Pages A-7, A-8. Contact Arrangements - Pages 22 and 23. Contacts, Sealing Plugs, Assembly Tools - Pages A-26, A-32, A-33. *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by Contact Arrangements - Pages A-24, A-25. Dimensions shown in inches (mm) the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. Specifications and dimensions subject to change www.ittcannon.com 13 P +.005 (0.13) -.010P(0.25) +.005 (0.13) .125 (3.18) -.010 (0.25) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .152 (3.86) .125 (3.18) .152 (3.86) 38999-Style Series II Connectors* Straight Plug MS27473-Style (MS service class E, P, T) KJ6 POLARIZING KEYWAY T THREAD P DIA. G DIA. A DIA. BLUE BAND (INDICATES REAR RELEASE CONTACT RETENTION SYSTEM) NOTE: For backshell dimensions and configurations, see pages 29 and 31. Shell Size 8 10 12 14 16 18 20 22 24 A Dia. Max. .485 (12.32) .606 (15.39) .765 (19.43) .890 (22.61) 1.014 (25.76) 1.140 (28.96) 1.264 (32.11) 1.389 (35.28) 1.514 (38.46) MS27484 (MS service class E, P, T) MS27484-Style (MS service class E, P, T) G Dia. Max. .749 (19.02) .858 (21.79) 1.030 (26.16) 1.155 (29.34) 1.280 (32.51) 1.405 (35.69) 1.530 (38.86) 1.640 (40.66) 1.765 (44.83) KJG6 P Dia. Max. .630 (16.00) .752 (19.10) .925 (23.50) 1.050 (26.67) 1.172 (29.77) 1.304 (33.12) 1.435 (36.45) 1.560 (39.62) 1.688 (42.88) T Thread 7/16-28UNEF-2A 9/16-24UNEF-2A 11/16-24UNEF-2A 13/16-20UNEF-2A 15/16-20UNEF-2A 1-1/16-18UNEF-2A 1-3/16-18UNEF-2A 1-5/16-18UNEF-2A 1-7/16-18UNEF-2A Overall Length With Backshells E F P Straight Cable Clamp Potting Max. 1.026 (26.06) 1.555 (39.50) 1.020 (25.91) 1.026 (26.06) 1.555 (39.50) 1.020 (25.91) 1.026 (26.06) 1.555 (39.50) 1.020 (25.91) 1.026 (26.06) 1.790 (45.47) 1.020 (25.91) 1.026 (26.06) 1.790 (45.47) 1.020 (25.91) 1.026 (26.06) 1.790 (45.47) 1.020 (25.91) 1.026 (26.06) 1.790 (45.47) 1.020 (25.91) 1.026 (26.06) 1.930 (49.02) 1.020 (25.91) 1.104 (28.04) 1.930 (49.02) 1.080 (27.43) Straight Plug Grounded KJG6 POLARIZING KEYWAY T THREAD POLARIZING KEYWAY T THREAD P DIA. A DIA. A P DIA. DIA. G DIA. BLUE BAND (INDICATES REAR RELEASE CONTACT BLUE BAND RETENTION SYSTEM) (INDICATES REAR G DIA. RELEASE CONTACT RETENTION SYSTEM) NOTE: For backshell dimensions and configurations, see pages 29 and 31. NOTE: For backshell dimensions and configurations, see pages A-30, A-32. Overall Length With Backshells Shell A G P Size Dia. Max. Dia. Max. Dia. Max. Shell A G P 8 .485 (12.32) .749 (19.02) .630 (16.00) Size Dia.(15.39) Max. Dia.(21.79) Max. Dia.(19.10) Max. 10 .606 .858 .752 8 .485 (12.32) .749 (19.02) .630 (16.00) 12 .765 (19.43) 1.030 (26.16) .925 (23.50) 10 .606 (15.39) .858 (21.79) .752 (19.10) 14 .890 (22.61) 1.155 (29.34) 1.050 (26.67) 12 .765 (19.43) 1.030 (26.16) .925 (23.50) 16 1.014 (25.76) 1.280 (32.51) 1.172 (29.77) 14 .890 (22.61) 1.155 (29.34) 1.050 (26.67) 18 1.140 (28.96) 1.405 (35.69) 1.304 (33.12) 16 1.014 (25.76) 1.280 (32.51) 1.172 (29.77) 20 1.264 (32.11) 1.530 (38.86) 1.435 (36.45) 18 1.140 (28.96) 1.405 (35.69) 1.304 (33.12) 22 1.389 (35.28) 1.640 (40.66) 1.560 (39.62) 20 1.264 (32.11) 1.530 (38.86) 1.435 (36.45) 24 1.514 (38.46) 1.765 (44.83) 1.688 (42.88) 22 1.389 (35.28) 1.640 (40.66) 1.560 (39.62) Performance Specifications-Pages 3 and 4. 24 1.514 (38.46) 1.765 (44.83) 1.688 (42.88) Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31, and 32. Performance Specifications-Pages A-7, A-8. Contact Arrangements - Pages 22 and 23. Contacts, Sealing Plugs, Assembly Tools - Pages A-26, A-32, A-33. T Thread T 7/16-28UNEF-2A Thread 9/16-24UNEF-2A 7/16-28UNEF-2A 11/16-24UNEF-2A 9/16-24UNEF-2A 13/16-20UNEF-2A 11/16-24UNEF-2A 15/16-20UNEF-2A 13/16-20UNEF-2A 1-1/16-18UNEF-2A 15/16-20UNEF-2A 1-3/16-18UNEF-2A 1-1/16-18UNEF-2A 1-5/16-18UNEF-2A 1-3/16-18UNEF-2A 1-7/16-18UNEF-2A 1-5/16-18UNEF-2A 1-7/16-18UNEF-2A E F P Overall Length Backshells Straight CableWith Clamp Potting Max. 1.026 E(26.06) 1.555 F(39.50) 1.020 P(25.91) Straight Cable(39.50) Clamp Potting(25.91) Max. 1.026 (26.06) 1.555 1.020 1.026 (26.06) 1.555 (39.50) 1.020 (25.91) 1.026 (26.06) 1.555 (39.50) 1.020 (25.91) 1.026 (26.06) 1.555 (39.50) 1.020 (25.91) 1.026 (26.06) 1.790 (45.47) 1.020 (25.91) 1.026 (26.06) 1.555 (39.50) 1.020 (25.91) 1.026 (26.06) 1.790 (45.47) 1.020 (25.91) 1.026 (26.06) 1.790 (45.47) 1.020 (25.91) 1.026 (26.06) 1.790 (45.47) 1.020 (25.91) 1.026 (26.06) 1.790 (45.47) 1.020 (25.91) 1.026 (26.06) 1.790 (45.47) 1.020 (25.91) 1.026 (26.06) 1.790 (45.47) 1.020 (25.91) 1.026 (26.06) 1.930 (49.02) 1.020 (25.91) 1.026 (26.06) 1.790 (45.47) 1.020 (25.91) 1.104 (28.04) 1.930 (49.02) 1.080 (27.43) 1.026 (26.06) 1.930 (49.02) 1.020 (25.91) 1.104 (28.04) 1.930 (49.02) 1.080 (27.43) Contact Arrangements - Pages A-24, A-25. *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 14 Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com 38999-Style Series II Connectors* Jam Nut Receptacle KJ7 MS27474-Style (MS service class E, P, T) R P .109 (2.77) MAX. PANEL THICKNESS T THREAD G POLARIZING KEYWAY J DIA. C D MOUNTING FLAT BLUE BAND (INDICATES REAR RELEASE COTACT RETENTION SYSTEM) V THREAD S DIA. .105 (2.66) MAX. NOTE: For backshell dimensions and configurations, see pages 29 and 31. Shell C Size Dia. Max. D Max. G Max. J Max. P Max. R Max. Hex. S Dia. Max. T Thread V Thread Overall length With Backshells E F P Straight Cable Clamp Potting Max. 8 .474 (12.04) .818 (20.78) .145 (3.68) .563 (14.30) .443 (11.25) 1.079 (27.41) 1.381 (35.08) 7/16-28UNEF-2A 7/8-20UNEF-2A .840 (21.34) 1.555 (39.50) 1.020 (25.91) 10 .591 (15.01) .942 (23.93) .145 (3.68) .680 (17.27) .443 (11.25) 1.205 (30.61) 1.506 (38.25) 9/16-24UNEF-2A 1-20UNEF-2A .840 (21.34) 1.555 (39.50) 1.020 (25.91) 12 .751 (19.08) 1.066 (27.08) .145 (3.68) .859 (21.82) .443 (11.25) 1.329 (33.76) 1.631 (41.43) 11/16-24UNEF-2A 1-1/8-18UNEF-2A .840 (21.34) 1.555 (39.50) 1.020 (25.91) 14 .876 (22.25) 1.191 (30.25) .145 (3.68) .984 (24.99) .443 (11.25) 1.455 (36.96) 1.756 (44.60) 13/16-20UNEF-2A 1-1/4-18UNEF-2A .840 (21.34) 1.790 (45.47) 1.020 (25.91) 16 1.001 (25.43) 1.321 (33.55) .145 (3.68) 1.108 (28.14) .443 (11.25) 1.579 (40.11) 1.944 (49.38) 1-15/16-20UNEF-2A 1-3/8-18UNEF-2A .840 (21.34) 1.790 (45.47) 1.020 (25.91) 18 1.126 (28.60) 1.441 (36.60) .145 (3.68) 1.233 (31.32) .443 (11.25) 1.705 (43.31) 2.022 (51.36) .840 (21.34) 1.790 (45.47) 1.020 (25.91) 1-1/16-18UNEF-2A 1-1/2-18UNEF-2A 20 1.251 (31.78) 1.566 (39.78) .171 (4.34) 1.358 (34.49) .469 (11.91) 1.829 (46.46) 2.147 (54.53) 1-3/16-18UNEF-2A 1-5/8-18UNEF-2A .840 (21.34) 1.790 (45.47) 1.020 (25.91) 22 1.376 (33.95) 1.691 (42.95) .171 (4.34) 1.483 (37.67) .469 (11.91) 2.017 (51.23) 2.271 (57.68) 1-5/16-18UNEF-2A 1-3/4-18UNS-2A .840 (21.34) 1.930 (49.02) 1.020 (25.91) 24 1.501 (38.13) 1.816 (46.13) .171 (4.34) 1.610 (40.89) .469 (11.91) 2.142 (54.41) 2.396 (60.86) 1-7/16-18UNEF-2A 1-7/8-18UNS-2A .860 (21.84) 1.900(48.26) 1.080 (27.43) Performance Specifications-Pages 3 and 4. Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31, and 32. Contact Arrangements - Pages 22 and 23. Panel Cutouts Flange Mounted Receptacle Jam Nut Receptacle P +_ .005 (0.13) 4 HOLES B +.000 (0.00) -.010 (0.25) R (T.P.) A +.010 (0.25) -.000 (0.00) A +.010 (0.25) -.000 (0.00) Shell Size 8 10 12 14 16 18 20 22 24 A Dia. .610 (15.49) .734 (18.64) .860 (21.84) .985 (25.02) 1.110 (28.19) 1.234 (31.34) 1.360 (35.54) 1.484 (37.69) 1.611 (40.92) Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com P Dia. .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .152 (3.86) R .594 (15.09) .719 (18.26) .812 (20.62) .906 (23.01) .969 (24.61) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.375 (34.93) Mfg. Screw #4 #4 #4 #4 #4 #4 #4 #4 #6 Shell Size 8 10 12 14 16 18 20 22 24 A Dia. .885 (22.48) 1.010 (25.65) 1.135 (28.82) 1.260 (32.00) 1.385 (35.18) 1.510 (38.35) 1.635 (41.53) 1.760 (44.70) 1.885 (47.88) *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 15 B Dia. .830 (21.08) .955 (24.26) 1.085 (27.56) 1.210 (30.73) 1.335 (33.91) 1.460 (37.08) 1.585 (40.26) 1.710 (43.43) 1.835 (46.61) 38999-Style Series III Connectors* How To Order Military Nomenclature D38999-Style 20 F C 35 A N CONNECTOR TYPE DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/ QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. SHELL STYLE SERVICE CLASS (HARDWARE FINISH) SHELL SIZE CONTACT ARRANGEMENT CONTACT STYLE POLARIZING POSITION CONNECTOR TYPE D38999-Style Series III CONTACT ARRANGEMENT See pages 22, 23. SHELL STYLE D38999/20-Style - Wall mount receptacle D38999/24-Style - Jam nut receptacle D38999/26-Style - Straight Plug, Grounded SERVICE CLASS (Hardware Finish) F - Electroless nickel - 85ºF to +392ºF (-65ºC to +200ºC) G - Electroless nickel plated. Space Grade. W - Olive drab cadmium over electroless nickel plate, -85ºF to +347ºF (-65ºC to +175ºC) CONTACT STYLE P - Pin contacts S - Socket contact A - Less Pin contacts* B - Less Socket contact* * Used only when other than power contacts are to be installed (i,e., shielded, thermocouple, etc.) POLARIZING POSITION N (normal), A, B, C, D, E. See page 19. Note: To order MS connectors less standard power contacts, purchase order must state “Less Contacts”. SHELL SIZE A B 9 11 13 15 17 19 21 23 25 C D E F G H J Military Designation Cannon Designation KJB Cannon Nomenclature 0 T 13 F 35 P N L SERIES PREFIX SHELL STYLE CLASS SHELL SIZE HARDWARE FINISH CONTACT ARRANGEMENT CONTACT STYLE POLARIZING POSITION MODIFICATION CODE SERIES PREFIX KJA/KJB* - Series III - Scoop proof, threaded coupling SHELL 0 5 6 7 STYLE - Wall mount receptacle - Box mount receptacle* - Straight plug - Jam nut receptacle CLASS T - Environment-resistant (without rear accessory) * Consult factory for availability SHELL SIZE 9 Cannon 11 13 15 17 19 21 23 25 Designation A B C D E F G H J Military Designation HARDWARE FINISH F - Electroless nickel, - 85ºF to +392ºF (-65ºC to +200ºC) G - Electroless nickel plated. Space Grade. W - Olive drab cadmium over electroless nickel plate, -85ºF to +347ºF (-65ºC to +175ºC) Z - Zinc Nickel, Black - - (Dash) When using a finish modification code CONTACT ARRANGEMENTS See pages 22 and 23. CONTACT STYLE P -Pin contacts S -Socket contacts POLARIZING POSITION N (normal) A, B, C, D, E. See page 19. MODIFICATION CODE L - Less contacts, not stamped on connector 16 - Outgassed NASA space graded connector 17 - Clinch Nuts installed (4-40 Size 9-21, 6-32 Size 23-25) 27 - Outgassed, standard connector A296 Black Zinc Cobalt, RoHS Compliant See page 26 for ordering PC Standoff Contacts using modification codes. *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 16 Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com 38999-Style Series III Connectors* Wall Mount Receptacle D38999/20 D38999/20-Style KJA0/KJB0 KJA0/KJB0 S S R1 R1 Z Z R2 R2 9 9 11 11 13 13 15 15 17 17 19 19 21 21 23 23 25 25 A A B B C C D D E E F F G G H H J J .6250-0.1P-0.3L-TS .6250-0.1P-0.3L-TS .7500-0.1P-0.3L-TS .7500-0.1P-0.3L-TS .8750-0.1P-0.3L-TS .8750-0.1P-0.3L-TS 1.0000-0.1P-0.3L-TS 1.0000-0.1P-0.3L-TS 1.1875-0.1P-0.3L-TS 1.1875-0.1P-0.3L-TS 1.2500-0.1P-0.3L-TS 1.2500-0.1P-0.3L-TS 1.3750-0.1P-0.3L-TS 1.3750-0.1P-0.3L-TS 1.5000-0.1P-0.3L-TS 1.5000-0.1P-0.3L-TS 1.6250-0.1P-0.3L-TS 1.6250-0.1P-0.3L-TS M M +.000 (.000) +.000 (.000) -.005 (.130) -.005 (.130) .820 (20.83) .820 (20.83) .820 (20.83) .820 (20.83) .820 (20.83) .820 (20.83) .820 (20.83) .820 (20.83) .820 (20.83) .820 (20.83) .820 (20.83) .820 (20.83) .790 (20.07) .790 (20.07) .790 (20.07) .790 (20.07) .790 (20.07) .790 (20.07) R 1 R 1 .719 (18.26) .719 (18.26) .812 (20.62) .812 (20.62) .906 (23.01) .906 (23.01) .969 (24.61) .969 (24.61) 1.062 (26.97) 1.062 (26.97) 1.156 (29.36) 1.156 (29.36) 1.250 (31.75) 1.250 (31.75) 1.375 (34.92) 1.375 (34.92) 1.500 (38.10) 1.500 (38.10) R 2 R 2 .594 (15.09) .594 (15.09) .719 (18.26) .719 (18.26) .812 (20.62) .812 (20.62) .906 (23.01) .906 (23.01) .969 (24.61) .969 (24.61) 1.062 (26.97) 1.062 (26.97) 1.156 (29.36) 1.156 (29.36) 1.250 (31.75) 1.250 (31.75) 1.375 (34.92) 1.375 (34.92) .230 MAX PANEL .230 MAX PANEL THICKNESS (including mounting hardware) THICKNESS (including mounting hardware) .520 (13.20) MAX .520 (13.20) MAX RED BAND RED BAND (FULLY MATED (FULLY MATED INDICTAOR BAND) INDICTAOR BAND) T TT T TT S +.004 (.100) +.004 (.100) S +.004 (.100) +.004 (.100) +_.012 (.300) -.002 (.050) -.002 (.050) +_.012 (.300) -.002 (.050) -.002 (.050) .938 (23.83) .938 (23.83) 1.031 (26.19) 1.031 (26.19) 1.125 (28.58) 1.125 (28.58) 1.219 (30.96) 1.219 (30.96) 1.312 (33.32) 1.312 (33.32) 1.438 (36.53) 1.438 (36.53) 1.562 (39.67) 1.562 (39.67) 1.688 (42.88) 1.688 (42.88) 1.812 (46.02) 1.812 (46.02) V THREAD V THREAD BLUE BAND BLUE BAND (INDICATES REAR (INDICATES REAR RELEASE CONTACT RELEASE CONTACT RETENTION SYSTEM) RETENTION SYSTEM) TT 4 PLACES TT 4 PLACES B Thread B Thread Class 2A Class 2A (Plated) (Plated) M M B B THREAD THREAD T T 4 PLACES 4 PLACES MS MS Shell Shell size size Shell Shell Code Size Code Size W W MAX. MAX. .128 (3.25) .128 (3.25) .128 (3.25) .128 (3.25) .128 (3.25) .128 (3.25) .128 (3.25) .128 (3.25) .128 (3.25) .128 (3.25) .128 (3.25) .128 (3.25) .128 (3.25) .128 (3.25) .154 (3.91) .154 (3.91) .154 (3.91) .154 (3.91) .216 (5.49) .216 (5.49) .194 (4.93) .194 (4.93) .194 (4.93) .194 (4.93) .173 (4.39) .173 (4.39) .194 (4.93) .194 (4.93) .194 (4.93) .194 (4.93) .194 (4.93) .194 (4.93) .242 (6.15) .242 (6.15) .242 (6.15) .242 (6.15) Metric V Metric V Thread Thread (Plated) (Plated) M12X1-6g0.100R M12X1-6g0.100R M15X1-6g0.100R M15X1-6g0.100R M18X1-6g0.100R M18X1-6g0.100R M22X1-6g0.100R M22X1-6g0.100R M25X1-6g0.100R M25X1-6g0.100R M28X1-6g0.100R M28X1-6g0.100R M31X1-6g0.100R M31X1-6g0.100R M34X1-6g0.100R M34X1-6g0.100R M37X1-6g0.100R M37X1-6g0.100R W W Max. Max. .098 (2.50) .098 (2.50) .098 (2.50) .098 (2.50) .098 (2.50) .098 (2.50) .098 (2.50) .098 (2.50) .098 (2.50) .098 (2.50) .098 (2.50) .098 (2.50) .126 (3.20) .126 (3.20) .126 (3.20) .126 (3.20) .126 (3.20) .126 (3.20) Z Z +.005 (.130) +.005 (.130) -.010 (.250) -.010 (.250) 1.235 (31.36) 1.235 (31.36) 1.235 (31.36) 1.235 (31.36) 1.235 (31.36) 1.235 (31.36) 1.235 (31.36) 1.235 (31.36) 1.235 (31.36) 1.235 (31.36) 1.235 (31.36) 1.235 (31.36) 1.235 (31.36) 1.235 (31.36) 1.235 (31.36) 1.235 (31.36) 1.235 (31.36) 1.235 (31.36) Straight Plug Grounded D38999/26-Style KJA6/KJB6 L Q W D THREAD B K BLUE BAND (INDICATES REAR RELEASE CONTACT RETENTION SYSTEMS .244 (6.20)+.012 (0.30) -.000 (0.00) Shell Size MS Shell size Code B +.008 (.200) -.000 (.000) D Thread Class 2B (Plated) 9 11 13 15 17 19 21 23 25 A B C D E F G H J .724 (18.40) .831 (21.10) 1.000 (25.40) 1.130 (28.70) 1.268 (32.20) 1.374 (34.90) 1.500 (38.10) 1.618 (41.40) 1.744 (44.30) .6250-0.1P-0.3L-TS .7500-0.1P-0.3L-TS .8750-0.1P-0.3L-TS 1.0000-0.1P-0.3L-TS 1.1875-0.1P-0.3L-TS 1.2500-0.1P-0.3L-TS 1.3750-0.1P-0.3L-TS 1.5000-0.1P-0.3L-TS 1.6250-0.1P-0.3L-TS K Max. .748 (19.00) .862 (21.90) 1.027 (26.10) 1.153 (29.30) 1.291 (32.80) 1.398 (35.50) 1.524 (38.70) 1.642 (41.70) 1.768 (44.90) L Max. 1.234 (31.34) 1.234 (31.34) 1.234 (31.34) 1.234 (31.34) 1.234 (31.34) 1.234 (31.34) 1.234 (31.34) 1.234 (31.34) 1.234 (31.34) Q Dia Max. .859 (21.82) .969 (24.61) 1.141 (28.98) 1.266 (32.16) 1.391 (35.53) 1.500 (38.10) 1.625 (41.28) 1.750 (44.45) 1.875 (47.62) V THREAD .185 (4.70) +_ .016 (0.40) Metric V Thread (Plated) M12X1-6g0.100R M15X1-6g0.100R M18X1-6g0.100R M22X1-6g0.100R M25X1-6g0.100R M28X1-6g0.100R M31X1-6g0.100R M34X1-6g0.100R M37X1-6g0.100R Performance Specifications-Pages 3 and 4. Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31, and 32. Contact Arrangements - Pages 22 and 23. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 17 W +.008 (.200) -.004 (.100) .760 (19.30) .760 (19.30) .760 (19.30) .760 (19.30) .760 (19.30) .760 (19.30) .760 (19.30) .760 (19.30) .760 (19.30) 38999-Style Series III Connectors* Jam Nut Receptacle D38999/24-Style D38999/24 KJA7/KJB7 KJA7/KJB7 M M A A P P S S B THREAD B THREAD S C C S FLAT FLAT .520 (13.2) MAX. .520 (13.2) MAX. RED BAND REDMATED BAND (FULLY (FULLY MATED INDICATOR BAND) INDICATOR BAND) Shell Shell Size Size 9 9 11 11 13 13 15 15 17 17 19 19 21 21 23 23 25 25 MS MSsize Shell Shell size Code Code A A B B C C D D E E F F G G H H J J A +.010A (.250) +.010 (.250) -.005 (.130) -.005 (.130) .104 (2.64) .104 (2.64) .104 (2.64) .104 (2.64) .104 (2.64) .104 (2.64) .104 (2.64) .104 (2.64) .104 (2.64) .104 (2.64) .135 (3.43) .135 (3.43) .135 (3.43) .135 (3.43) .135 (3.43) .135 (3.43) .135 (3.43) .135 (3.43) B Thread BClass Thread 2A Class 2A (Plated) (Plated) .6250-0.1P-0.3L-TS .6250-0.1P-0.3L-TS .7500-0.1P-0.3L-TS .7500-0.1P-0.3L-TS .8750-0.1P-0.3L-TS .8750-0.1P-0.3L-TS 1.0000-0.1P-0.3L-TS 1.0000-0.1P-0.3L-TS 1.1875-0.1P-0.3L-TS 1.1875-0.1P-0.3L-TS 1.2500-0.1P-0.3L-TS 1.2500-0.1P-0.3L-TS 1.3750-0.1P-0.3L-TS 1.3750-0.1P-0.3L-TS 1.5000-0.1P-0.3L-TS 1.5000-0.1P-0.3L-TS 1.6250-0.1P-0.3L-TS 1.6250-0.1P-0.3L-TS C +.004C(.100) +.004 (.100) -.010 (.250) -.010 (.250) .651 (16.53) .651 (16.53) .751 (19.07) .751 (19.07) .938 (23.82) .938 (23.82) 1.062 (26.97) 1.062 (26.97) 1.187 (30.15) 1.187 (30.15) 1.312 (33.32) 1.312 (33.32) 1.437 (36.50) 1.437 (36.50) 1.562 (39.67) 1.562 (39.67) 1.687 (42.85) 1.687 (42.85) Performance Specifications-Pages A-7, A-8. Performance Specifications-Pages 3 and 4. Contacts, Sealing Plugs, Assembly Tools - Pages A-26, A-32, A-33. Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31, and 32. Contact Arrangements - Pages A-24, A-25. Contact Arrangements - Pages 22 and 23. Z +.005Z(.130) +.005 (.130) -.040 (.100) -.040 (.100) 1.243 (31.57) 1.243 (31.57) 1.243 (31.57) 1.243 (31.57) 1.243 (31.57) 1.243 (31.57) 1.243 (31.57) 1.243 (31.57) 1.243 (31.57) 1.243 (31.57) 1.243 (31.57) 1.243 (31.57) 1.243 (31.57) 1.243 (31.57) 1.243 (31.57) 1.243 (31.57) 1.243 (31.57) 1.243 (31.57) M P +.005M(.130) +.016P(.410) +.005 (.130) +.016 (.410) -.004 (.100) -.004 (.100) -.004 (.100) -.004 (.100) .871 (22.12) .871 (22.12) .871 (22.12) .871 (22.12) .878 (22.30) .878 (22.30) .878 (22.30) .878 (22.30) .878 (22.30) .878 (22.30) .878 (22.30) .878 (22.30) .878 (22.30) .878 (22.30) .878 (22.30) .878 (22.30) .878 (22.30) .878 (22.30) .555 (14.10) .555 (14.10) .555 (14.10) .555 (14.10) .563 (14.30) .563 (14.30) .563 (14.30) .563 (14.30) .563 (14.30) .563 (14.30) .563 (14.30) .563 (14.30) .563 (14.30) .563 (14.30) .563 (14.30) .563 (14.30) .563 (14.30) .563 (14.30) S S 1.062 (26.97) 1.062 (26.97) 1.250 (31.75) 1.250 (31.75) 1.375 (34.92) 1.375 (34.92) 1.500 (38.10) 1.500 (38.10) 1.625 (41.28) 1.625 (41.28) 1.812 (46.02) 1.812 (46.02) 1.938 (49.23) 1.938 (49.23) 2.062 (52.37) 2.062 (52.37) 2.188 (55.38) 2.188 (55.38) Z Z BLUE BAND BLUE BAND REAR (INDICATES (INDICATES REAR RELEASE CONTACT RELEASE CONTACT RETENTION SYSTEM) RETENTION SYSTEM) V THREAD V THREAD R THREAD R THREAD .062 (1.57) MIN./.125 (3.18) MAX. .062 (1.57) MIN./.125 (3.18) MAX. PANEL THICKNESS PANEL THICKNESS Metric R Metric ThreadR Thread (Plated) (Plated) M17X1-6g0.100R M17X1-6g0.100R M20X1-6g0.100R M20X1-6g0.100R M25X1-6g0.100R M25X1-6g0.100R M28X1-6g0.100R M28X1-6g0.100R M32X1-6g0.100R M32X1-6g0.100R M35X1-6g0.100R M35X1-6g0.100R M38X1-6g0.100R M38X1-6g0.100R M41X1-6g0.100R M41X1-6g0.100R M44X1-6g0.100R M44X1-6g0.100R Metric V Metric ThreadV Thread (Plated) (Plated) M12X1-6g0.100R M12X1-6g0.100R M15X1-6g0.100R M15X1-6g0.100R M18X1-6g0.100R M18X1-6g0.100R M22X1-6g0.100R M22X1-6g0.100R M25X1-6g0.100R M25X1-6g0.100R M28X1-6g0.100R M28X1-6g0.100R M31X1-6g0.100R M31X1-6g0.100R M34X1-6g0.100R M34X1-6g0.100R M37X1-6g0.100R M37X1-6g0.100R Panel Cutouts Wall Mounted Receptacle Wall Mounted Receptacle Jam Nut Receptacle Jam Nut Receptacle A A B Shell Size 9 11 13 15 17 19 21 23 25 A Shell +.010 (.25) Size -.000 (.00) .693 (17.6) 9 .825 (20.96) 11 1.010 (25.65) 13 1.135 (28.83) 15 1.260 (32.00) 17 1.385 (35.18) 19 1.510 (38.35) 21 1.635 (41.53) 23 1.760 (44.70) 25 BA +.000 +.010(.00)* (.25) -.010 -.000(.25) (.00) .657 (16.70) .693 (17.6) .771 (19.58) .825 (20.96) .955 (24.26) 1.010 (25.65) 1.085 (27.56) 1.135 (28.83) 1.210 (30.73) 1.260 (32.00) 1.335 (33.91) 1.385 (35.18) 1.460 (37.08) 1.510 (38.35) 1.585 (40.26) 1.635 (41.53) 1.710 (43.43) 1.760 (44.70) B ØH1(.00)* +.000 (Min.)(.25) -.010 .656 .657 (16.66) (16.70) .796 .771 (20.22) (19.58) .922 .955 (23.42) (24.26) 1.047 1.085(26.59) (27.56) 1.219 1.210(30.96) (30.73) 1.297 1.335(32.94) (33.91) 1.422 1.460(36.12) (37.08) 1.547 1.585(39.29) (40.26) 1.672 1.710(42.47) (43.43) ØH2R (TP) (Min.) .516 (13.11) .719 (18.26) .625 (15.88) .812 (20.62) .906 (23.01) .750 (19.05) .906 (23.01) .969 (24.61) 1.016 (25.81) 1.062 (26.97) 1.141 (28.98) 1.156 (29.36) 1.266 (36.16) 1.250 (31.75) 1.375 (34.92) 1.375 (34.92) 1.484 (37.69) 1.500 (38.10) ØH2 ØH1 (Min.) (Min.) .656 .516(16.66) (13.11) .796 .625(20.22) (15.88) .750(23.42) (19.05) .922 1.047 .906(26.59) (23.01) 1.219 1.016(30.96) (25.81) 1.297 1.141(32.94) (28.98) 1.422 1.266(36.12) (36.16) 1.375(39.29) (34.92) 1.547 1.672 1.484(42.47) (37.69) B ØT R ±.050 (TP)(.13) .128(18.26) (3.25) .719 .128(20.62) (3.25) .812 .128(23.01) (3.25) .906 .128(24.61) (3.25) .969 .128(26.97) (3.25) 1.062 .128(29.36) (3.25) 1.156 .128(31.75) (3.25) 1.250 .154 (391) 1.375 (34.92) .150(38.10) (3.81) 1.500 ØT ±.050 (.13) .128 (3.25) .128 (3.25) .128 (3.25) .128 (3.25) .128 (3.25) .128 (3.25) .128 (3.25) .154 (391) .150 (3.81) * For Dimension B, *Shell Size 9 only,B,tolerance is 9±.004 For Dimension Shell Size only, (.10) tolerance is ±.004 (.10) *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 18 Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com 38999-Style Series III Composite Connectors* How To Order Military Nomenclature DISCLAIMER:Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. D38999-Style 20 M C 35 A N CONNECTOR TYPE SHELL STYLE SERVICE CLASS (HARDWARE FINISH) SHELL SIZE CONTACT ARRANGEMENT CONTACT STYLE POLARIZING POSITION CONNECTOR TYPE D38999/ - 38999-Style Series III CONTACT ARRANGEMENT See pages 22, 23. SHELL STYLE D38999/20 - Wall mount receptacle D38999/26 - Straight Plug, Grounded CONTACT STYLE H - Pin conatcts (1500 cycle) J - Socket contacts (1500 cycle) P - Pin conatcts S - Socket contact A - Less Pin contacts* B - Less Socket contact* SERVICE CLASS (Hardware Finish) J - Olive drab cadmium over electroless nickel plate, -85ºF to +347ºF (-65ºC to +175ºC) M - Electroless nickel - 85ºF to +392ºF (-65ºC to +200ºC), RoHS Compliant * Used only when other than power contacts are to be installed (i,e., shielded, thermocouple, etc.) POLARIZING POSITION N (normal), A, B, C, D, E. See page 21. SHELL SIZE C D E F G H Military Designation A B J 9 11 13 15 17 19 21 23 25 Note: To order MS connectors less standard power contacts, purchase order must state “Less Contacts”. Cannon Designation KJB Cannon Nomenclature 0 T 13 M 35 P N L SERIES PREFIX SHELL STYLE CLASS SHELL SIZE HARDWARE FINISH CONTACT ARRANGEMENT CONTACT STYLE POLARIZING POSITION MODIFICATION CODE SERIES PREFIX KJB* - Series III - Scoop proof, threaded coupling SHELL STYLE 0 - Wall mount receptacle 6 - Straight plug CLASS T - Environment-resistant (without rear accessory) SHELL SIZE 9 Cannon 11 13 15 17 19 21 23 25 Designation A B C D E F G H J Military Designation HARDWARE FINISH J - Olive drab cadmium over electroless nickel plate, -85ºF to +347ºF (-65ºC to +175ºC) M -  Electroless nickel, - 85ºF to +392ºF (-65ºC to +200ºC), RoHS Compliant CONTACT STYLE H - Pin conatcts (1500 cycle) J - Socket contacts (1500 cycle) P - Pin contacts S - Socket contacts POLARIZING POSITION N (normal) A, B, C, D, E. See page 21. MODIFICATION CODE L - Less contacts, not stamped on connector * Consult factory for availability CONTACT ARRANGEMENTS See pages 22 and 23. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 19 38999-Style Series III Composite Connectors* Wall Mount Receptacle D38999/20-Style KJB0T S Z R1 R2 B THREAD T 4 PLACES W MAX. M V THREAD BLUE BAND (INDICATES REAR RELEASE CONTACT RETENTION SYSTEM) .230 MAX PANEL THICKNESS (including mounting hardware) RED BAND (FULLY MATED INDICTAOR BAND) TT 4 PLACES Shell Size MS Shell size Code B Thread Class 2A (Plated) M +.000 (.000) -.005 (.130) 9 A .6250-0.1P-0.3L-TS .768 (19.50) .719 (18.26) .594 (15.09) .938 (23.83) .128 (3.25) 11 B .7500-0.1P-0.3L-TS .768 (19.50) .812 (20.62) .719 (18.26) 1.031 (26.19) .128 (3.25) 13 C .8750-0.1P-0.3L-TS .768 (19.50) .906 (23.01) .812 (20.62) 1.125 (28.58) 15 D 1.0000-0.1P-0.3L-TS .768 (19.50) .969 (24.61) .906 (23.01) 17 E 1.1875-0.1P-0.3L-TS .768 (19.50) 1.062 (26.97) 19 F 1.2500-0.1P-0.3L-TS .768 (19.50) 21 G 1.3750-0.1P-0.3L-TS 23 H 25 J T TT S +.004 (.100) +.004 (.100) +_.012 (.300) -.002 (.050) -.002 (.050) .520 (13.20) MAX Metric V Thread (Plated) W Max. Z +.005 (.130) -.010 (.250) .216 (5.49) M12X1-6g0.100R .143 (3.63) 1.255 (32.00) .194 (4.93) M15X1-6g0.100R .143 (3.63) 1.255 (32.00) .128 (3.25) .194 (4.93) M18X1-6g0.100R .143 (3.63) 1.255 (32.00) 1.219 (30.96) .128 (3.25) .173 (4.39) M22X1-6g0.100R .143 (3.63) 1.255 (32.00) .969 (24.61) 1.312 (33.32) .128 (3.25) .194 (4.93) M25X1-6g0.100R .143 (3.63) 1.255 (32.00) 1.156 (29.36) 1.062 (26.97) 1.438 (36.53) .128 (3.25) .194 (4.93) M28X1-6g0.100R .143 (3.63) 1.255 (32.00) .736 (18.70) 1.250 (31.75) 1.156 (29.36) 1.562 (39.67) .128 (3.25) .194 (4.93) M31X1-6g0.100R .171 (4.35) 1.255 (32.00) 1.5000-0.1P-0.3L-TS .736 (18.70) 1.375 (34.92) 1.250 (31.75) 1.688 (42.88) .154 (3.91) .242 (6.15) M34X1-6g0.100R .171 (4.35) 1.255 (32.00) 1.6250-0.1P-0.3L-TS .736 (18.70) 1.500 (38.10) 1.375 (34.92) 1.812 (46.02) .154 (3.91) .242 (6.15) M37X1-6g0.100R .171 (4.35) 1.255 (32.00) R 1 R 2 Straight Plug Grounded D38999/26-Style KJB6T L Q D THREAD B V THREAD BLUE BAND (INDICATES REAR RELEASE CONTACT RETENTION SYSTEMS Shell Size MS Shell size Code B +.008 (.200) -.000 (.000) L Max. Q Dia Max. 9 11 13 15 17 19 21 23 25 A B C D E F G H J .811 (20.6) .929 (23.6) 1.11 (28.2) 1.23 (31.3) 1.35 (34.5) 1.46 (37.3) 1.59 (40.5) 1.72 (43.7) 1.84 (46.8) 1.24 (31.5) 1.24 (31.5) 1.24 (31.5) 1.24 (31.5) 1.24 (31.5) 1.24 (31.5) 1.24 (31.5) 1.24 (31.5) 1.24 (31.5) .858 (21.8) .984 (25.0) 1.157 (29.4) 1.27 (32.5) 1.40 (35.7) 1.51 (38.5) 1.64 (41.7) 1.76 (44.9) 1.88 (48.0) Performance Specifications-Pages 3 and 4. Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31, and 32. Contact Arrangements - Pages 22 and 23. *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 20 Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com 38999-Style Series I, II, III Connectors* Polarizing Positions Series I Angle of Rotation (Degrees) C D N A B 5º REF Front face of receptacle (plug opposite). Insert arrangement does not rotate with main key-keyway. The master key is rotated to provide shell polarization; the minor keys remain fixed. Shell Size Normal A 9 11 13 15 17 19 21 23 25 95º 95º 95º 95º 95º 95º 95º 95º 95º 77º 81º 75º 74º 77º 77º 77º 80º 80º C D D A 67º 63º 61º 65º 65º 65º 69º 69º C D 123º 127º 129º 125º 125º 125º 121º 121º 113º 109º 115º 116º 113º 113º 113º 110º 110º Angle of Rotation (Degrees) Series II N B B 10º REF Shell Size Normal A B C 100º 100º 100º 100º 100º 100º 100º 100º 100º 82º 86º 80º 79º 82º 82º 82º 85º 85º 72º 68º 66º 70º 70º 70º 74º 74º 128º 132º 134º 130º 130º 130º 126º 126º Key & Keyway Arrangement identification Letter N A B C D E N A B C D E N A B C D E N A B C D E ARº or APº BSC 105 102 80 35 64 91 95 113 90 53 119 51 80 135 49 66 62 79 80 135 49 66 62 79 BRº or BPº BSC 140 132 118 140 155 131 141 156 145 156 146 141 142 170 169 140 145 153 142 170 169 140 145 153 8 10 12 14 16 18 20 22 24 118º 114º 120º 121º 118º 118º 118º 115º 115º Front face of receptacle (plug opposite). Insert arrangement does not rotate with main key-keyway. The master key is rotated to provide shell polarization; the minor keys remain fixed. Series III RECEPTACLE (Front face shown) Shell Size MAIN KEYWAY AR˚ BSC 9 BR˚ BSC DR˚ BSC CR˚ BSC 11 13 and 15 PLUG (Front face shown) MAIN KEY AP˚ BSC BP˚ BSC DP˚ BSC 17 and 19 CP˚ BSC NOTES 1. All Angles are BSC 2. The insert arrangement does not rotate with main key/keyway 3. All minor keys are rotated to provide shell polarization, the master key remains fixed at twelve o’clock position. 4. Polarization is different from Series I and II. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com 21 23 and 25 Key Locations CRº or CPº BSC 215 248 230 205 234 197 208 182 195 220 176 184 196 200 200 200 180 197 196 200 200 200 180 197 *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 21 DRº or DPº BSC 265 320 312 275 304 240 236 292 252 255 298 242 293 310 244 257 280 272 293 310 244 257 280 272 38999-Style Series I, II, III Connectors* Contact Arrangements (Engaging View Pin Insert) Indicates layouts are available in all shell styles including MS27499, MS27508, KJ2E and KJ5E † Consult factory MS27505E/KJL5E insert availability * Socket insert only ** Pin insert only (Not available in socket insert Series I and III) Series III Series II Series I No. of Contacts Service Ratings 9-98 8-98† 9-98 3 #20 I Series III Series II Series I No. of Contacts Service Ratings 13-98 12-98† 13-98 10 #20 I 9-35 8-35† 9-35 6 #22D M 11-4 4 #20 I 13-35 12-35† 13-35 22 #22D M 11-5 10-5† 11-5 5 #20 I 11-98 10-98† 11-98 6 #20 I 15-5 14-5† 15-5 5 #16 II 10-99† 11-99 7 #20 I 15-15 14-15† 15-15 14 #20,1 #16 I 11-35 10-35† 11-35 13 #22D M 12-3 3 #16 II 15-18 14-18† 15-18 18 #20 I 12-4† 13-4** 4 #16 I 13-8 12-8† 13-8 8 #20 I 15-35 14-35† 15-35 37 #22D M 15-19 15-19 19 #20 I 21 31 Series III Series II Series I No. of Contacts Service Ratings 15-97 14-97† 15-97 8 #20,4 #16 I Series III Series II Series I No. of Contacts Service Ratings 18-28 19-28** 26 #20,2 #16 I Series III Series II Series I No. of Contacts Service Ratings 21-11 21-11 11 #12 I Series III Series II Series I No. of Contacts Service Ratings 21-75 21-75*• 4 #8 Twinax M 17-6 16-6 17-6 6 #12 I 17-8 16-8† 17-8 8 #16 II 17-26 16-26† 17-26 26 #20 I 18-30 19-30** 29 #20, 1 #16 I 21-16 20-16† 21-16 16 #16 II 23-21 22-21 23-21 21 #16 II 19-11 18-11 19-11 11 #16 II 19-32 18-32† 19-32 32 #20 I 21-35 20-35† 21-35 79 #22D M 21-39 20-39† 21-39 37 #20,2 #16 I *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 22 _ 16-42† _ 42 #22 M 17-35 16-35† 17-35 55 #22D M 22-32 23-32** 32 #20 I 42 16-99† 17-99** 21 #20,2 #16 I 19-35 18-35† 19-35 66 #22D M 21-41 20-41† 21-41 41- #20 I 23-35 22-35† 23-35 100 #22D M Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com 38999-Style Series I, II, III Connectors* Contact Arrangements (Engaging View Pin Insert) * Socket insert only ** Pin insert only (Not available in socket insert Series I and III † Indicates layouts are available in all shell styles including MS27499, MS27508, KJ2E and KJ5E • Consult factory for MS27505E/KJL5E insert availability II Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 23 38999-Style Series I, II, III Connectors* Contacts-Pin (Series I/II/III) MIL-C-39029/58 1st BAND (WIDE) 2nd BAND (NARROW) 3rd BAND (NARROW) MIL-C-39029/107 Black Cannon Part Number 980-0008-878 AS39029 Military Part Number AS39029/58-360 Blue Orange 980-0008-879 AS39029/58-363 Blue Yellow 980-0008-880 AS39029/58-364 Orange Blue Green 980-0008-881 AS39029/58-365 Contact Size 22D 1 Blue Color Bands 2 Red 3 Black Cannon Part Number 980-0010-032 AS39029 Military Part Number AS39029/107-620 20 Blue Red Brown 980-0010-033 AS39029/107-621 16 Blue Red Red 980-0010-034 AS39029/107-622 12 Blue Red Orange 980-0010-035 AS39029/107-623 1 Orange Color Bands 2 Blue 20 Orange 16 Orange 12 Contact Size 22D H Contacts (1500 Cycle) Contact Size 3 Cable Accomodations Cannon Part Number 8 Coax 95 Ohms 8 Twinax 75 Ohms 12 Coax 249-2196-000 RG-180 249-2196-001 RG-174, 179, 316 249-2196-002 RG-142 980-1000-012 M17/176-00002 980-1000-016 RG-174, 179, 316 Contacts-Socket (Series II) MIL-C-39029/57 KJ Manufacture identification Code Area - Typical all contacts Orange Color Bands 2 Green 20 Orange 16 Orange 12 Orange Contact Size 22D 1 Yellow Cannon Part Number 980-0008-874 AS39029 Military Part Number AS39029/57-354 Green Violet 980-0008-875 AS39029/57-357 Green Gray 980-0008-876 AS39029/57-358 Green White 980-0008-877 AS39029/57-359 3 Contacts-Socket (Series I & III) MIL-C-39029/56 1st BAND (WIDE) 2nd BAND (NARROW) 3rd BAND (NARROW) MIL-C-39029/106 1 Color Bands 2 3 Cannon Part Number AS39029 Military Part Number Orange Yellow Gray 20 Orange 980-0008-870 AS39029/56-348 Green Brown 980-0008-871 16 AS39029/56-351 Orange Green Red 980-0008-872 12 AS39029/56-352 Orange Green Orange 980-0008-873 AS39029/56-353 Contact Size 1 Color Bands 2 3 Cannon Part Number AS39029 Military Part Number 22D Blue Brown Yellow 980-0008-993 AS39029/106-614 20 Blue Brown Green 980-0008-994 AS39029/106-615 16 Blue Brown Blue 980-0008-995 AS39029/106-616 12 Blue Brown Violet 980-0008-996 AS39029/106-617 Contact Size 22D J Contacts (1500 Cycle) Contact Size 8 Coax 8 Twinax Cannon Part Number 95 Ohms 75 Ohms 12 Coax 249-2195-000 RG-180 249-2195-001 RG-174, 179, 316 249-2195-002 RG-142 980-1000-013 M17/176-00002 980-1000-015 RG-174, 179, 316 *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 24 Cable Accomodations Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com 38999-Style Series I, II, III Connectors* Contacts-Printed Circuit Board PIN PRINTED CIRCUIT CONTACT EXTENSION FROM REAR OF CONNECTOR (MAX / MIN) PC CONTACT PART NUMBER CONTACT SIZE TAIL DIA. ±.001 030-2097-002 22D 0.020 030-2097-006 22D 0.020 030-2097-008 22D 0.020 030-2097-015 22D 0.020 030-1997-006 20 0.025 030-1997-022 20 0.025 030-1997-030 20 0.019 030-1995-023 16 0.062 030-1995-024 16 0.062 MS27466 MS27467 KJL0 MS27656 MS27468 KJL3 / KJL7 0.261 0.189 0.069 N/A 0.216 0.144 0.293 0.221 0.166 0.094 0.281 0.209 0.364 0.292 0.278 0.206 0.118 0.046 0.244 0.176 0.052 N/A 0.199 0.131 0.276 0.208 0.149 0.081 0.264 0.196 0.347 0.279 0.261 0.193 0.101 0.033 MS27505E MS27472 MS27474 KJ0 / KJ7 KJL5E 0.408 0.376 0.216 0.184 0.363 0.331 0.440 0.408 0.313 0.281 0.428* 0.396* 0.511 0.479 0.425 0.393 0.265 0.233 0.264 0.226 0.072 0.034 0.219 0.181 0.296 0.258 0.169 0.131 0.284 0.246 0.367 0.329 0.281 0.243 0.121 0.083 PC CONTACT EXTENSION MS27513E MS27499E MS27508E MS27497 / NO MS KJ2E / KJ5E KJ2R / KJ3 / KJ5R 0.408 0.376 0.216 0.184 0.363 0.331 0.440 0.408 0.313 0.281 0.428* 0.396* 0.511 0.479 0.425 0.393 0.265 0.233 0.264 0.226 0.072 0.034 0.219 0.181 0.296 0.258 0.169 0.131 0.284 0.246 0.367 0.329 0.281 0.243 0.121 0.083 D38999/20-Style D38999/24-Style D38999/24-Style KJB0 KJA7 (19-25) KJA7 (9-17) KJA0 0.280 0.262 0.258 0.216 0.200 0.198 0.088 0.070 0.066 0.024 0.008 0.006 0.235 0.217 0.213 0.171 0.155 0.153 0.290 0.294 0.312 0.230 0.232 0.248 0.163 0.185 0.167 0.103 0.121 0.105 0.282 0.300 0.278 0.220 0.236 0.218 0.365 0.383 0.361 0.303 0.319 0.301 0.279 0.275 0.297 0.217 0.215 0.233 0.119 0.137 0.115 0.057 0.073 0.055 G (SEE NOTE 5) PC CONTACT EXTENSION (KJL5E & KJ0/2E/2R/3/5E/5R/7) (KJL0/3/7 & KJA0/7) SOCKET (SERIES II) PRINTED CIRCUIT CONTACT EXTENSION FROM REAR OF CONNECTOR (MAX / MIN) PC CONTACT PART NUMBER CONTACT SIZE TAIL DIA. ±.001 031-1186-006 22D 0.020 031-1186-011 22D 0.020 031-1186-013 22D 0.020 031-1186-021 22D 0.020 031-1124-021 20 0.025 031-1123-007 16 0.062 MS27472 MS27474 KJ0 / KJ7 MS27499E MS27508E KJ2E / KJ5E MS27513E MS27497 / NO MS KJ2R / KJ3 / KJ5R 0.179 0.141 0.109 0.071 0.217 0.179 0.262 0.224 0.247 0.209 0.101 0.063 0.323 0.291 0.253 0.221 0.361 0.329 0.406 0.374 0.391* 0.359* 0.245 0.213 0.179 0.141 0.109 0.071 0.217 0.179 0.262 0.224 0.247 0.209 0.101 0.063 SOCKET (SERIE I & III) PRINTED CIRCUIT CONTACT EXTENSION FROM REAR OF CONNECTOR (MAX / MIN) PC CONTACT PART NUMBER CONTACT SIZE TAIL DIA. ±.001 031-1147-014 22D 0.020 031-1147-039 22D 0.020 031-1147-040 22D 0.020 031-1124-040 20 0.025 031-1123-020 16 0.029 D38999/20-Style D38999/24-Style D38999/24-Style KJB0 KJA7 (9-17) KJA0 KJA7 (19-25) MS27466 MS27467 KJL0 MS27656 MS27468 KJL3 / KJL7 MS27505E 0.244 0.172 0.168 0.096 0.438 0.366 0.486 0.414 0.272 0.200 0.227 0.159 0.151 0.083 0.421 0.353 0.469 0.401 0.255 0.187 0.391* 0.359* 0.315* 0.283* 0.585* 0.553* 0.633 0.601 0.245 0.183 0.169 0.107 0.439 0.377 0.487 0.425 0.419 0.387 0.273 0.211 KJL5E 0.263 0.199 0.187 0.123 0.457 0.393 0.505 0.441 0.291 0.227 0.241 0.181 0.165 0.105 0.435 0.375 0.483 0.423 0.269 0.209 NOTES: UNLESS OTHERWISE SPECIFIED. 1. PC CONTACTS HAVE GOLD PLATING OVER SUITABLE UNDERPLATE PER MIL-C-39029 SPECIFICATION. 4. * INDICATES PC TAIL WITH STEP EXTENDING FROM REAR OF CONNECTOR. 2. PC CONTACT EXTENSIONS APPLY TO ITT CANNON CONNECTORS ONLY FOR ALL SHELL SIZES. 5. G DIM. IS .031 +/- .016 FOR KJL5E AND .120 +/- .030 (SHELL SIZES 8 THRU 22) AND .090 +/- .050 (SHELL SIZE 24) FOR KJ0/2E/2R/3/5E/5R/7. 3. N/A INDICATES NO EXTENSION. 6. FOR OTHER SPECIFIC PC CONTACT DATA, CONSULT ITT EC, SANTA ANA, CA, USA. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 25 38999-Style Series III Connectors* 38999-Style Series III Modification Codes: PC Standoff Contacts installed How to Order Modification Code 100 Definition Untinned PC contacts with extensions E & E1 101 Lead tinned PC contacts with extensions E & E1 102 Lead-free tinned PC contacts with extensions E & E1 103 Untinned PC contacts with extensions E & E2 104 Lead tinned PC contacts with extensions E & E2 105 Lead-free tinned PC contacts with extensions E & E2 *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. KJB Wall Mount with PC Standoff Contacts installed E1/E2 E1/E2 UNTINNED, LEAD TINNED OR LEAD-FREE TINNED MAXIMUM AREA E E UNTINNED, LEAD TINNED OR LEAD-FREE TINNED MAXIMUM AREA B B A A PANEL REF. PANEL REF. KJB0 WALL MOUNT Contact Style P S KJB7 JAM NUT Dimension E KJB7T (Jam Nut) 9 to 25 .392 / .436 (9.96 / 11.07) KJB0T (Wall Mount) 9 to 19 .459 / .503 (11.66 / 12.78) KJB0T (Wall Mount) 21 to 25 .489 / .533 (12.42 / 13.54) Contact Size 22D E1 .611 / .671 (15.52 / 17.04) .687 / .738 (17.22 / 18.75) .708 / .768 (17.98 / 19.51) E2 .749 / .809 (19.02 / 20.54) .816 / .876 (20.72 / 22.25) .846 / .906 (21.48 / 23.01) E .392 / .436 (9.96 / 11.07) .459 / .503 (11.66 / 12.78) .489 / .533 (12.42 / 13.54) E1 .611 / .671 (15.52 / 17.04) .687 / .738 (17.22 / 18.75) .708 / .768 (17.98 / 19.51) E2 .749 / .809 (19.02 / 20.54) .816 / .876 (20.72 / 22.25) .846 / .906 (21.48 / 23.01 *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 26 ØA Max. .028 (.71) ØB Min. .044 (1.12) 20 .036 (.91) .052 (1.32) 16 .068 (1.73) .084 (2.13) Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com 38999-Style Series I, II, III Connectors* Contact Sealing Bushings Size 8 Twinax Sealing Bushing 321-1035-000 Used with the Twinax contact in Twinax layouts for sealing cable size M17/176-00002 Size 8 Coax Sealing Bushing 321-1034-001 Used with the Coax contact in Twinax layouts for sealing cable size RG-180 Twinax Grommet Coax Grommet Contact Sealing Bushing Sequence into Twinax Grommet (Bushing only used with Twinax grommet) Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 27 38999-Style Series I, II, III Connectors Wire Sizes and Diameters Finished wire outside dimensions Contact Size 22D Wire size (AWG) 28, 26, 24, 22 Minimum 0.030 Maximum 0.054 22M* 28, 26, 24 0.030 0.050 22* 26, 24, 22 0.034 0.060 20 24, 22, 20 0.040 0.083 16 20, 18, 16 0.065 0.109 12 14, 12 0.097 0.142 8 Coax RG-180 0.136 0.146 8 Twinax M17/176-00002 0.124 0.134 12 Coax RG174, 179, 316 0.094 0.102 *For reference only Recommended Jam Nut Torque Values Shell Size 8 10 12 14 16 18 20 22 24 Series II InchPounds 46/50 55/60 70/75 80/85 90/95 100/110 110/120 120/130 140/150 Shell Size 9 11 13 15 17 19 21 23 25 Series I & III InchPounds 30/36 40/46 55/60 70/75 80/85 90/95 100/110 110/120 120/130 Coupling Nut Torque Values (Series I, II and III) Maximum engagement and disengagement Shell Inch Size Pound 8 8 8 9 12 10 12 11 16 12 16 13 20 14 20 15 24 16 24 17 28 18 28 19 32 20 32 21 36 22 36 23 36 24 40 25 Minimum disengagement Inch Pound 2 2 2 2 2 2 4 3 4 3 5 3 6 5 7 5 7 5 *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 28 Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com 38999-Style Series I, II Connectors* Backshell - Type E (Straight), Series II only Shell Size Series II 8 10 12 14 16 18 20 22 24 B A DIA. A Dia. Max. .580 (14.73) .705 (17.91) .830 (21.08) .955 (24.26) 1.080 (27.32) 1.205 (30.61) .330 (33.78) 1.455 (36.96) 1.555 (39.50) B Dia. Max. .328 (8.33) .328 (8.33) .328 (8.33) .328 (8.33) .328 (8.33) .328 (8.33) .328 (8.33) .328 (8.33) .270 (6.86) How To Order Finishes Shell Size A B C N Series II 8 10 12 14 16 18 20 22 24 Cadmium/Nickel-Clear Part Number 057-0776-000 057-0777-000 057-0778-000 057-0779-000 057-0780-000 057-0781-000 057-0782-000 057-0783-000 057-0784-000 Cadmium/Nickel-O.D Part Number 057-0862-000 057-0863-000 057-0864-000 057-0846-000 057-0847-000 057-0848-000 057-0849-000 057-0850-000 057-0851-000 Anodic Non-Cond. Part Number 057-0819-000 057-0820-000 057-0821-000 057-0822-000 057-0823-000 057-0824-000 057-0825-000 057-0826-000 057-0827-000 Electroless Nickel Part Number 057-0776-002 057-0777-002 057-0778-002 057-0779-002 057-0780-002 057-0781-002 057-0782-002 057-0783-002 057-0784-002 Backshell - Type F (Cable Clamp) Z. A DIA. Shell Size Series Series I II 9 8 11 10 13 12 15 14 17 16 19 18 21 20 23 22 25 24 N X Y 1 X How To Order (MS Version) MS27506 - A - 8 - 2 Military Designation MS27506 Type F Straight with Cable Clamp Finish A - Cad/Nickel (Clear) B - Cad/Nickel (O.D) F - Nickel (Electroless) Shell Size Series I - 9, 11, 13, 15, 17, 19, 21, 23, 25 Series II - 8, 10, 12, 14, 16, 18, 20, 22, 24 Adapter Geometry - 2 Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com A Max. .508 (14.73) .705 (17.91) .830 (21.08) .955 (24.26) 1.080 (27.43) 1.205 (30.61) 1.330 (33.78) 1.455 (36.96) 1.555 (39.50) N Dia. Max. .135 (3.43) .198 (5.03) .322 (7.18) .385 (9.78) .510 (12.95) .635 (16.13) .635 (16.13) .760 (19.30) .810 (20.57) X Dia. Min. .234 (5.94) .297 (7.54) .422 (10.72) .547 (12.89) .609 (15.47) .734 (18.64) .734 (18.64) .922 (23.42) .984 (24.99) X 1Dia. Min. .187 (4.75) .187 (4.75) .281 (7.14) .325 (8.26) .356 (9.04) .456 (11.58) .519 (13.18) .519 (13.18) .657 (16.69) Shell Size A Series Series MS Cannon I II Part Number Part Number Cannon 9 8 27506-*8-2 057-3005-*** -012 11 10 27506-*10-2 057-3006-*** -011 13 12 27506-*12-2 057-3007-*** -012 15 14 27506-*14-2 057-3008-*** -010 17 16 27506-*16-2 057-3009-*** -012 19 18 27506-*18-2 057-3010-*** -013 21 20 27506-*20-2 057-3011-*** -011 23 22 27506-*22-2 057-3012-*** -015 25 24 27506-*24-2 057-3013-*** -013 * MS Finish MS A A A A A A A A A Y Max. .829 (21.06) .891 (22.63) 1.016 (25.81) 1.141 (28.98) 1.203 (30.56) 1.469 (37.31) 1.469 (37.31) 1.656 (42.06) 1.750 (44.45) Finishes B Cannon MS -013 B -012 B -013 B -011 B -013 B -014 B -013 B -016 B -014 B *** Cannon Finish *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 29 Z Max. .813 (20.65) .813 (20.65) .813 (20.65) .813 (20.65) .933 (23.70) .933 (23.70) .933 (23.70) .933 (23.70) .893 (22.68) N Cannon -015 -014 -015 -013 -015 -016 -015 -018 -017 F MS F F F F F F F F F 38999-Style Series III Connectors* Backshell Series III M85049/ 38 S 9 W Military Designator Type Straight Cable Clamp 90° with Cable Clamp Configuration Self Locking Nonself Locking* 38 39 S *For Nonself locking, leave designator blank Shell Size Series III 9, 11, 13, 15, 17, 19, 21, 23, 25 Finish Electroless Nickel OD Cadmium over electroless nickel N W Straight Cable Clamp - Nonself Locking Military Military Part Number Shell Size Part Number Series III Nickel OD Cadmium M85049/38-9W M85049/38-9N 9 M85049/38 11 M85049/38-11W M85049/38-11N 11 M85049/38S-11W M85049/38S-11N 13 M85049/38-13W M85049/38-13N 13 M85049/38S-13W M85049/38S-13N 15 M85049/38-15W M85049/38-15N 15 M85049/38S-15W M85049/38S-15N 17 M85049/38-17W M85049/38-17N 17 M85049/38S-17W M85049/38S-17N 19 M85049/38-19W M85049/38-19N 19 M85049/38S-19W M85049/38S-19N 21 M85049/38-21W M85049/38-21N 21 M85049/38S-21W M85049/38S-21N 23 M85049/38-23W M85049/38-23N 23 M85049/38S-23W M85049/38S-23N 25 M85049/38-25W M85049/38-25N 25 M85049/38S-25W M85049/38S-25N 90° with Cable Clamp - Nonself Locking M85049/39 Straight Cable Clamp - Self Locking Military Military Shell Size Part Number Part Number Series III Nickel OD Cadmium M85049/38S-9W M85049/38S-9N 9 Military Shell Size Part Number Series III Nickel M85049/39-9W 9 Military Part Number OD Cadmium M85049/39-9N 11 M85049/39-11W M85049/39-11N 13 M85049/39-13W M85049/39-13N 15 M85049/39-15W 17 90° with Cable Clamp - Self Locking Military Shell Size Part Number Series III Nickel M85049/39S-9W 9 Military Part Number OD Cadmium M85049/39S-9N 11 M85049/39S-11W M85049/39S-11N 13 M85049/39S-13W M85049/39S-13N M85049/39-15N 15 M85049/39S-15W M85049/39S-15N M85049/39-17W M85049/39-17N 17 M85049/39S-17W M85049/39S-17N 19 M85049/39-19W M85049/39-19N 19 M85049/39S-19W M85049/39S-19N 21 M85049/39-21W M85049/39-21N 21 M85049/39S-21W M85049/39S-21N 23 M85049/39-23W M85049/39-23N 23 M85049/39S-23W M85049/39S-23N 25 M85049/39-25W M85049/39-25N 25 M85049/39S-25W M85049/39S-25N *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 30 Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com 38999-Style Series I, II, III Connectors* Backshell - Type P (Potting Boot) Shell Size Series I Series II A DIA. B How To Order (MS Version) Series I 9 11 13 15 17 19 21 23 25 MS27486 - 10 - 1 MS Designation Shell Size Series I - 9, 11, 13, 15, 17, 19, 21, 23, 25 Series II - 8, 10, 12, 14, 16, 18, 20 , 22 , 24 1 - Straight Cup NOTE: When ordering the MS version you must specify both MS numbers for the Potting Boot and the Adapter Ring. Shell Size 8 10 12 14 16 18 20 22 24 9 11 13 15 17 19 21 23 25 Series II 8 10 12 14 16 18 20 22 24 A Dia. Max. B Dia. Max. .598 (15.19) .723 (18.36) .847 (21.51) .969 (24.61) 1.087 (27.61) 1.211 (30.76) 1.336 (33.93) 1.461 (37.11) 1.586 (40.28) .434 (11.02) .548 (13.92) .673 (17.09) .798 (20.27) .899 (22.83) 1.024 (26.01) 1.141 (29.98) 1.274 (32.36) 1.399 (35.53) MS27486 Part Number Cannon Part Number 27486-**-1 27486-**-1 27486-**-1 27486-**-1 27486-**-1 27486-**-1 27486-**-1 27486-**-1 27486-**-1 040-0185-000 040-0169-000 040-0170-000 040-0171-000 040-0172-000 040-0173-000 040-0174-000 040-0175-000 040-0176-000 ** Only even numbered shell size is applicable. Potting Boot Adapter Ring How To Order (MS Version) Finishes MS27485 - A - 8 Miltary Designation Finish A - Cad/Nickel (Clear) B - Cad/Nickel (O.D) F - Nickel (Electroless) Shell Size Series I - 9, 11, 13, 15, 17, 19, 21, 23, 25 Series II - 8, 10, 12, 14, 16, 18, 20 , 22 , 24 NOTE: When ordering the MS version you must specify both MS numbers for the Potting Boot and the Adapter Ring. Shell Size Series Series I II 9 11 13 15 17 19 21 23 25 8 10 12 14 16 18 20 22 24 MS27485 Part Number 27485-*-** 27485-*-** 27485-*-** 27485-*-** 27485-*-** 27485-*-** 27485-*-** 27485-*-** 27485-*-** Cannon Part Number A B N F Cadmium/Nickel Clear Cadmium/Nickel-O.D Electroless Nickel 237-0887-*** 237-0874-*** 237-0875-*** 237-0876-*** 237-0877-*** 237-0878-*** 237-0879-*** 237-0880-*** 237-0881-*** Cannon MS Cannon MS Cannon MS -000 -000 -000 -000 -000 -000 -000 -000 -000 A A A A A A A A A -001 -001 -001 -001 -001 -001 -001 -001 -001 B B B B B B B B B -002 -002 -002 -002 -002 -002 -002 -003 -003 F F F F F F F F F * MS Finish ** Only even numbered shell size is applicable *** Cannon Finish Wire Sealing Plugs Series III Size Series I & II Size 22D 20 16 12 22D 20 16 12 Part Number Cannon MS27488 225-1013-000 MS27488-22-2 225-0070-000 MS27488-20-2 225-0104-000 MS27488-16-2 225-0105-000 MS27488-12-2 Color Code Black Red Green Orange Wire sealing plugs meet MS27488 standards. The plugs are color coded according to size for easy identification. Wire sealing plugs may be ordered separately. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 31 38999-Style Series I, II, III Connectors* Tools - Crimp M22520/1-01 CBT-530 M22520/2-01 Pin Contact Series I/II/III CBT-565 Socket Contact Series II Socket Contact Series I & III Contact Size Crimp Tool Part Number Locator or Turret Part Number Crimp Tool Part Number Locator or Turret Part Number Crimp Tool Part Number Locator or Turret Part Number 22D or 22M* M22520/2-01 M22520/2-09 M22520/2-01 M22520/2-06 M22520/2-01 M22520/2-07 22* M22520/2-01 M22520/2-09 M22520/2-01 M22520/2-06 M22520/2-01 M22520/2-07 20 M22520/1-01 M22520/1-04 OR TH 187 M22520/1-01 M22520/1-04 M22520/1-01 M22520/1-04 16 M22520/1-01 M22520/1-04 OR TH 187 M22520/1-01 M22520/1-04 M22520/1-01 M22520/1-04 12 M22520/1-01 M22520/1-04 M22520/1-01 M22520/1-04 M22520/1-01 M22520/1-04 8 Coax Inner Conductor Crimp Tool Crimp Tool Locator Outer Conductor Crimp Tool Crimp Tool Locator RG180 M22520/2-01 995-0002-268 RG180 M22520/5-01 M22520/5-39B RG 174, 179, 316 M22520/2-01 995-0002-268 RG 174, 179, 316 M22520/5-01 M22520/5-37B RG 142 M22520/2-01 995-0002-268 RG 142 M22520/5-01 M22520/5-19B 12 Coax Inner Conductor Crimp Tool Crimp Tool Locator Outer Conductor Crimp Tool Crimp Tool Locator RG174, 179, 316 M22520/2-01 M22520/2-34 RG174, 179, 316 M22520/31-01 M22520/31-02 8 Twinax Crimp Tool Crimp Tool Locator Center Contact M22520/2-01 K709 Intermediate Contact M22520/5-01 Y631 Die Closure B Outer Contact Y631 Die Closure A M22520/5-01 * For reference only Tools - Plastic Contact Size 22D Cannon Description CIET-22D-01 Cannon Part Number 274-7048-000 M81969 Part Number M81969/14-01 Superseded Military Part Number MS27534-22D Insertion Color Tip Green 22M* CIET-22D-01 274-7048-000 M81969/14-01 MS27534-22D Green White 20 CIET-20-10 274-7001-000 M81969/14-10 MS27534-20 Red Orange 16 CIET-16-03 274-7002-000 M81969/14-03 MS27534-16 Blue White 12 CIET-12-04 274-7003-000 M81969/14-04 MS27534-12 Yellow White 8 Coax/Twinax CET8-T 323-7004-001 — — — — 12 Coax CIET-12-04 274-7003-000 M81969/14-04 M527534-12 Yellow White Insertion/Extraction Insertion/Extraction Extraction Color Tip White Insertion tool not required for size 8 Tools - Metal (MS) Insertion Extraction Insertion Extraction Contact Size MS27495 Part Number ITT CANNON Part Number Color Band MS27495 Part Number ITT CANNON Part Number 22D OR 22M* MS27495 A22M 995-0001-718 Black MS27495 R22M 22* MS27495 A22 995-0001-720 Brown 20 MS27495 A20 995-0001-716 Red 16 MS27495 A16 995-0001-732 Blue Color Band 995-0001-719 No.1 Black No.2 White MS27495 R22 995-0001-721 Brown White MS27495 R20 995-0001-717 Red White MS27495 R16 995-0001-731 Blue White Band No. 1 indicates tool size. Band No. 2 indicates removal tool. * For reference only *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 32 Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com 38999-Style Series I, II, III Connectors* Assembly Instructions Wire Stripping Strip insulation from end of wire to be crimped. (See table for proper stripping dimensions.) Do not cut or damage wire strands. Wire Size A A 22D or 22M* .125 (3.18) 20 .188 (4.77) 16 .188 (4.77) 12 .188 (4.77) * For reference only Contact Crimping VISUAL INSPECTION HOLE 1. Insert stripped wire into contact crimp pot. Wire must be visible thru inspection hole. 2. Using correct crimp tool and locator, cycle the tool once to be sure the indentors are open. Insert contact and wire into locator. Squeeze tool handles firmly and completely to insure a proper crimp. The tool will not release unless the crimp indentors in the tool head have been fully actuated. 3. Release crimped contact and wire from tool. Be certain the wire is visible thru inspection hole in contact. Contact Insertion 1. Remove hardware from plug or receptacle and slip over wire bundle in proper order for reassembly. 2. Using proper plastic or metal insertion tool for corresponding contact, position wire in tip of the tool so that the tool tip butts up against the contact shoulder. 3. Press tool against contact shoulder and, with firm and even pressure, insert wired contact and tool tip into center contact cavity. A slight click may be heard as metal retaining tines snap into place behind contact shoulder. 4. Remove tool and pull back lightly on wire to make sure contact is properly seated. Repeat operation with remainder of contacts to be inserted, beginning with the center cavity and working outward in alternating rows. 5. After all contacts are inserted, fill any empty cavities with wire sealing plugs, Ressemble plug or receptacle hardware. 2. Using plastic or metal extraction tool with proper color code corresponding to contact size, place wire in tool. 3. Insert tool into contact cavity until tool tip bottoms against the contact shoulder, expanding clip retaining tines. Contact Extraction 1. Remove hardware from plug or receptacle and slide hardware back along wire bundle. 4. Hold wire firmly in tool and extract wired contact and tool. Repeat operation for all contacts to be extracted. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com 5. Fill any empty wire cavities with wire sealing plugs, and 6. Reassemble plug or receptacle. *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 33 38999-Style Series I, II, III Connectors* 38999-Style Specifications The following excerpts are some of the parameter requirements of the MIL-DTL-3899 Specification. Paragraph Reference Test Description Contact Retention 4 5 19 Coupling Torque 456 Requirements After preloading to 3 pounds maximum, the force shall be applied at a rate of approximately 1 pound per second and maintained at full load for 5-10 seconds. No damage to contacts or insert shall result nor shall the contacts be dislocated from their normal position in the connector more than 0.012 inch under the given load. Failure to meet these requirements shall be cause for rejection. Contact Size 22M* 22D 22* 20 18 Loads in Pounds ± 10% 10 10 10 15 25 For qualification testing, mating halves shall be coupled and uncoupled, measuring the torques necessary.The torques required to couple and uncouple mating connector halves shall fall within the limits specifications as follows: Shell Size 8/9 10/11 12 13 Max. 8 12 16 16 Torque Min. 2 2 2 2 Shell Size 14 15 16 17 Max. 20 20 24 24 Torque Min. 4 3 4 3 Shell Size 18 19 20 21 Max. 28 28 32 32 Torque Min. 5 3 6 5 Shell Size 22 23 24 25 Max. 36 36 36 40 Torque Min. 7 5 7 5 Durability 457 Connector halves shall be mated and unmated 250 times for Series II with ground fingers and 500 times for Series I and III at a rate not exceeding 300 cycles per hour. The test may be performed by hand or by mechanical means, but the coupling ring shall be operated as in normal service. Failure to complete this test because of mechanical malfunction shall be cause for rejection. Insulation Resistance 459 An insulation resistance test shall be performed on unmated connectors in accordance with MIL-STD-202, Method 302, Test condition B. Measurement shall be made between three pairs of adjacent contacts and the shell. Failure to meet the minimum requirement of 50,000 megohms for Classes E, P, F, R, and T shall be cause for rejection. Vibration 4 5 22 Wired, mated connectors shall be subjected to the vibration test of MIL-STD-202, Method 214, Test Condition II, except that the duration shall be one hour in each plane. Receptacles shall be mounted on the vibration fixture by normal means. All contacts shall be wired in a series circuit and 100-500 millamperes of current shall be allowed to flow through the series circuit during vibration. Suitable means shall be employed to monitor the current flow and to indicate any discontinuity of more than 1 microsecond. The wire bundle shall be damped to the nonvibrating points at least 8 inches from the rear of the connector. Current discontinuity of 1 microsecond or more, disengagement of the mated connectors, evidence of cracking, breaking, or loosening of parts shall be cause for rejection. Shock 4 5 23 Wired mated connectors shall be subjected to one shock in each direction in each of three mutually perpendicular axes. The pulse shall be approximate half sine wave of 300g ± 15% magnitude with a duration of 3 ± 1 milliseconds. Receptacles shall be mounted on a shock fixture by normal means. All contacts shall be wired in a series circuit and 100-150 ma. of current shall flow through the series circuit during shock. Suitable means shall be employed to monitor the current flow and to indicate any discontinuity of more than 1 microsecond. The wire bundle shall be clamped to fixed points at feast 8 inches from the rear of the connector, Current discontinuity of 1 microsecond or more, disengagement of the mated connectors, evidence of cracking, breaking, or loosening of parts shall be cause for rejection. Thermal Shock 454 Unmated receptacles shall be subjected to 10 cycles of thermal shock in the following manner: The receptacle shall be suspended for 10 + 1 - 0 minutes in the center of a cold water both with a volume of approximately one cubic foot. No Step a dimension of the bath shall be less than 10 inches. The water temperature shall not exceed 4ºC (39.20ºF) The receptacle shall be suspended for 10 1 - 0 minutes in the center of a hot water bath with a volume of approximately one cubic foot. No Step b dimension of the bath shall be less than 10 inches. The water temperature shall be not less than 94ºC (201ºF). The time of transfer from one bath to the other shall not exceed 5 seconds. At the end of the tenth cycle, the receptacle shall have the excess moisture shaken off and shall then be dried in a forced air oven at 66±5˚C for 15 ±1 minutes. Any evidence of damage resulting from this test shall be cause for rejection. Altitude Immersion 458 Mated connectors shall be placed in a container of water at approximately 20ºC and placed in an altitude chamber. All wire ends shall be located within the chamber and exposed to the chamber atmosphere, but not submerged. The exposed wire ends shall not be sealed. A quantity of salt, 5 percent by weight, shall be added to make the water conductive. The chamber pressure shall then be reduced to approximately one inch of mercury and maintained for thirty minutes. The chamber pressure shall then be slowly returned to atmospheric. This shall be considered one cycle. Two additional cycles shall be performed. At the end of the last cycle, while the mated connectors are still submerged, the Insulation Resistance Test (room temperature), and the High Potential Test (sea level voltages) shall be performed upon the same circuits. Failure to meet an insulation resistance minimum of 2,000 megohms or any evidence of dielectric breakdown or -flashover shall be cause for rejection. Solvent Immersion 4 5 29 Unmated connectors shall be immersed fully in the applicable fluid specified below for 20 hours. After removal from the fluid, each connector shall remain for one hour in free air at room temperature. a.) Jet fuel JP-4 to MIL-J-5624 b.) Aircraft lubricating oil to MIL-L-9236 Corrosion 4 5 12 Unmated connectors and individual contact samples shall be subjected to the soft spray of MIL-STD-202, Method 101, Test Condition 8 (tin plated, Class Y receptacles-24 hours). Immediately after exposure, the surfaces of the specimens shall be thoroughly washed in tap water and dried in a circulatory oven at a temperature of 38 ±3ºC (100ºF) for a period of approximately 12 hours. Any exposure of basis metal as a result of this test, shall be cause for rejection. Dynamic Salt Spray 4 5 12 2 (Series I and 11, finish B; Series III, class W). The wired assembled plugs and receptacles shall be mated and unmated 50 cycles at a rate of 300 cycles per hour maximum. The mating and unmating shall be accomplished so that the plug and receptacle are completely separated during each cycle. The connectors shall then be subjected to the salt spray test in accordance with method 1001 of MIL-STD- 1344. The connectors shall be tested for 452 hours mated followed by 48 hours unmated. After the salt spray exposure the remaining number of durability cycles specified in 4.7.7 shall be completed. Temperature Durability 4 5 33 Wired rated connectors shall be subjected to the indicated anbient temperature for a period of 1,000 hours +3º +3º 150 Series I and II (finish B) 175 Series I and II (finish A) (302º F) (347º F) -0ºC -0ºC Series III (class W) +3º 175-0ºC (347 º F) All other finishes +3º 200-0ºC (392º F) * For reference only *DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent. 34 Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com Product Safety and Warranty 1. MATERIAL CONTENT AND PHYSICAL FORM Electrical connectors do not usually contain hazardous materials. Electrical connectors and individual components do not release or otherwise result in exposure to hazardous chemicals under normal conditions of use and fall under the definition of “Article,” under the Hazard Communication Standard, 29 CFR 1910.1200, and are not considered hazardous materials. Solder and fluxes can be hazardous if inhaled or absorbed through the skin and should only be used as recommended by the manufacturer. Please consult your solder and flux manufacturer for more specific application recommendations. 2. FIRE CHARACTERISTICS AND ELECTRIC SHOCK HAZARD There is no fire hazard when the connector is correctly wired and used within the specified parameters. Incorrect wiring or assembly of the connector or careless use of metal tools or conductive fluids, or transit damage to any of the component parts may cause electric shock or burns. Live circuits must not be broken by separating mated connectors as this may cause arcing, ionization and burning. Heat dissipation is greater at maximum resistance in a circuit. Hot spots may occur when resistance is raised locally by damage, e.g. cracked or deformed contacts, broken strands of wire. Local overheating may also result from the use of the incorrect application tools or from poor quality soldering or slack screw terminals. Overheating may occur if the ratings in the product Data Sheet/Catalog are exceeded and can cause breakdown of insulation and hence electric shock. If heating is allowed to continue it intensifies by further increasing the local resistance through loss of temper of spring contacts, formation of oxide film on contacts and wires and leakage currents through carbonization of insulation and tracking paths. Fire can then result in the presence of combustible materials and this may release noxious fumes. Overheating may not be visually apparent. Burns may result from touching overheated components. 3. HANDLING Care must be taken to avoid damage to any component parts of electrical connectors during installation and use. Although there are normally no sharp edges, care must be taken when handling certain components to avoid injury to fingers. Always wear safety glasses to avoid potential injury to eyes during cleaning, soldering, fiber preparation, etc. Electrical connectors may be damaged in transit to the customers, and damage may result in creation of hazards. Products should therefore be examined prior to installation/use and rejected if found to be damaged. Proper lifting techniques shall be used for handling shipping cartons. 4. DISPOSAL Please recycle, reclaim or dispose of connectors and individual components in accordance with local, state and federal laws. Incineration of certain materials may release noxious or even toxic fumes.. 5. APPLICATION Connectors with exposed contacts should not be selected for use on the current supply side of an electrical circuit, because an electric shock could result from touching exposed contacts on an unmated connector. Voltages in excess of 30 V ac or 42.5 V dc are potentially hazardous and care should be taken to ensure that such voltages cannot be transmitted in any way to exposed metal parts of the connector body. The connector and wiring should be checked, before making live, to have no damage to metal parts or insulators, no solder blobs, loose strands, conducting lubricants, swarf, or any other undesired conducting particles. Circuit resistance and continuity check should be made to make certain that there are no high resistance joints or spurious conducting paths. Always use the specified application tools, cleaning materials and assembly instructions documented in the Data Sheet/Catalog. Do not permit untrained personnel to wire, assemble or tamper with connectors. For operation voltage please see appropriate national regulations. IMPORTANT GENERAL INFORMATION (i) Air and creepage paths/Operating voltage. The admissible operating voltages depend on the individual applications and the valid national and other applicable safety regulations. For this reason the air and creepage path data are only reference values. Observe reduction of air and creepage paths due to PC board and/or harnessing. (ii) Temperature All information given are temperature limits. The operation temperature depends on the individual application. (iii) Pressure All pressure information given are differential pressure limits. The specific differential pressure limits, across the connector interface, are documented in the Data Safety/ catalog Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com 35 (iv) Other important information Cannon continuously endeavors to improve their products. Therefore, Cannon products may deviate from the description, technical data and shape as shown in this catalog and data sheets. Commodities in this catalog may be controlled for export or re-export under the Export Administration Regulations (EAR), Nuclear Regulatory Commission (NRC) Regulations, or by the International Traffic in Arms Regulations (ITAR) when specifically designed, modified or configured for military use. ITT Cannon manufactures high quality products. However, these products are intended to be used in accordance with the specifications in this publication. Any use or application that deviates from the stated operating specifications is not recommended and may be unsafe. No information and data contained in this publication shall be construed to create any liability on the part of ITT. ITT Cannon Kanban pull systems, and automated electrical, mechanical, and optical test and inspection equipment. The combination of our manufacturing strength and our advanced manufacturing facilities allows ITT to offer products at market driven prices. Our capabilities, especially in robotics, computerized precision tooling, Kaizen Project Management, Six Sigma tools, and testing, give ITT the most optimized global manufacturing footprint in the interconnect industry. ITT is a focused multi-industrial company that designs and manufactures highly engineered critical components and customized technology solutions. Our customers in the energy, transportation and industrial markets depend on us to solve their most critical problems, and we focus on partnering with them to find solutions to their unique challenges. Founded in 1920, ITT is headquartered in White Plains, N.Y., with employees in more than 35 countries. Our connector portfolio remains the most extensive in the industry, offering a reliable and cost effective range of interconnect solutions with the brands of Cannon, VEAM and BIW Connector Systems. Continuous investment in technology and research & development have enabled ITT to provide new, innovative products and solutions to markets including: • • • • • • • The Custom Difference As the industry leader in harsh environment interconnect applications, ITT’s world class engineering teams will work directly with our customers to design and develop cost effective solutions for their applications. In many cases we may modify one of our standard designs to ensure a highly reliable solution where timing is critical. Yet, in those cases where a complete custom interconnect solution is required, ITT will work with our customer’s Engineers to design an interconnect solution which will be cost effective yet highly reliable. As professional consultants, our Engineering teams will provide a thorough systems and mechanical analysis of any proposed solution. These analyses provide our customers with sophisticated electrical signal and mechanical characterizations to determine the best solution for their application. Automotive Computer & Consumer Electronics Industrial/Instrumentation Military & Aerospace Oil & Gas Telecommunications/Wireless Handheld Devices Transportation When you specify a Cannon, VEAM or BIW Connector Systems connector, you can rely on products that are designed, developed, and manufactured to the highest quality and reliability standards. This tradition of excellence is based on ITT’s corporate culture of operating its businesses under the principles of Six Sigma. At ITT, Six Sigma is not just a quality philosophy but a complete corporate culture that drives the entire business. Our Value Based Management and Value Based Product Development systems are two cornerstones that allow for the development of both leadership and product engineering principles, ensuring our industry leading products are developed to the accepted market driven lead times. These principles have allowed ITT to become the market leader in all of our business portfolios. RoHS Compliance Information ITT has implemented a strict parts control plan for all ITT electronics plants worldwide that allows the Cannon, VEAM, and BIW Connector Systems product portfolios to meet the requirements of the European Union Directive 2002/95/EC better known as the Reduction of Hazardous Substances (RoHS) initiative. As appropriate, specific Cannon, VEAM, and BIW Connector Systems products may be ordered with an R prefix number which insures our customers will receive RoHS compliant parts for their commercial electronics applications and equipment. Since most RoHS hazardous substances center around specific metal plating and lead solder coatings, ITT’s products for RoHS compliance are available in the following plating finishes: electroless nickel, stainless steel, anodize over aluminum and gold plating. It should be noted that gold plating would be recommended as the replacement for tin-lead solder when ordering board mount connectors. Six Sigma Manufacturing ITT Cannon operates manufacturing facilities in the United States, Germany, Italy, Mexico, China and Japan, all of which have particular product area strengths allowing ITT to offer a truly global footprint to our customers. Our facilities are world class and accommodate full vertical integration utilizing the latest manufacturing technologies including: automated and robotic machining centers, Super Market manufacturing cells, Dimensions shown in inches (mm) Specifications and dimensions subject to change 36 www.ittcannon.com Circular/Filter/Hermetic Connectors As a world leader in circular, filter, and hermetic connectors, ITT can leverage its design and manufacturing expertise to fit virtually any application. Our expertise includes fast positive mating for a wide range of military applications, as well as numerous sizes and contact configurations for various harsh environments. D-Subminiature Connectors Cannon invented D-sub connectors in 1952. Our family of D-Subs now includes combinations of signal, power and RF, as well as severe service sealed connectors. Cannon D-Subs are available with an extensive line of backshells and accessories and are one of the most economical shielded connector solutions available. Fiber Optic Connectors and Cable Assemblies Cannon fiber optic solutions provide an excellent performance/ cost value. Performance may be tailored to the end system, with our use of superior materials and bonding agents providing highly effective solutions. Our wide variety of products include fiber optic hybrid contacts, multi-channel, rack and panel and hirel assemblies. Microminiature Connectors Developed first by Cannon in the 1960s, Microminiature Connectors offer high performance and reliability with exceptional versatility. Available in rectangular, circular and strip-style configurations for countless applications, many of our highly engineered Microminiature connector products meet critical customer demands in multiple applications across the Aerospace & Defense industry. Rack and Panel Connectors Pioneered by Cannon during the 1930s, our Rack & Panel Connectors offer an unmatched variety of shell configurations and insert arrangements, as well as materials, plating and contact options. Today, we are recognized as an industry leader, offering an unparalleled range of off-the-shelf and custom Rack & Panel products to align with customer needs. RF Connectors ITT Cannon has been providing interconnect products to the Microwave and RF industry since 1963 (formerly The Sealectro Corporation). The RF 50 & 75 Ohm product lines cover UHF band through Ku band requirements. These connectors and cable assemblies are available with a thread type, snap type, bayonet type or slide on coupling method. The frequencies range from DC to 18+ GHz. ITT Cannon is a leading global manufacturer of connector products serving international customers in the aerospace and defense, medical, energy, transportation and industrial end markets. Whether delivering critical specs to aircraft pilots, streaming data through communications satellites or enabling ultrasound technology that gives an expectant mother the first glimpse of her unborn child, Cannon connects the world’s most important information with the people who need it. To learn more, visit www.ittcannon.com Connect with your ITT Cannon representative today or visit us at www.ittcannon.com Connect with the experts. Whether communicating with our soldiers, or with our first responders saving lives, ITT Cannon connects the world’s most important information with those who need it. CHINA—Shenzhen City GERMANY—Weinstadt HONG KONG ITALY—Lainate +86.755.2726.7888 +49.7151.699.0 +852.2732.2720 +39.02938721 JAPAN—Kanagawa KOREA—Seoul TAIWAN—Taipei UK—Basingstoke +81.462.57.2010 +82.2.7027111 +886.2.25452020 USA—Watertown, CT +1.860.274.9681 The “ITT Engineered Blocks“ symbol, “Engineered for life," “ITT” and “Cannon“ are registered trademarks of ITT Inc. Specification and other data are based on information available at the time of printing, and are subject to change without notice. Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML. +44.1256.311200 USA—Irvine, CA +1.800.854.3028 © 2017 ITT Inc ITT Cannon 38999-Style Connectors Catalog | 20170730