C&K KM Series Subminiature Pushbutton Switches
Features/Benefits • Reliable contact design • Available with pretravel
and overtravel • Extended overtravel option • RoHS compliant
Typical Applications • Alarm systems • Computers • Detector switch application
A Pushbutton
Models Available
Specifications
CONTACT RATING: Q contact material (KM11, KM12 Models): 0.25 AMPS @ 125 V AC or DC (UL); (KM33 Model): 1 AMP @ 125 V AC or 28 V DC. See page A-67 for additional ratings. ELECTRICAL LIFE: 10,000 actuations min. at full load. CONTACT RESISTANCE: Below 30 mΩ typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109Ω min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to 85ºC. CAP INSTALLATION FORCE: 10 lbs. max. permissible.
NOTE: Any models supplied with Q or B contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center.
Materials
HOUSING & BUSHING: 6/6 nylon (UL94V-2), black. ACTUATOR: 6/6 nylon (UL 94V-2), natural. Internal o-ring seal, available on KM11 & KM33 models. MOVABLE CONTACT: B contact material: Bronze or copper, with gold plate over nickel plate. See page A-67 for additional contact materials. STATIONARY CONTACTS & TERMINALS: B contact material: Copper, with gold plate over nickel plate. See page A-67 for additional contact materials. RETURN SPRING: Music wire, phosphor coated. MOUNTING NUT: Brass, nickel plated. TERMINAL SEAL: Epoxy.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages A-66 and A-68. For additional options not shown in catalog, consult Customer Service Center.
Switch Function KM12 On-Mom., SPDT KM11 Off-Mom., SPST, N.O. KM33 On-Mom., SPST, N.C. Actuator 02 .398" high, .122" dia. KM12 01 .122" dia. KM11, Stepped, .108” dia. KM33 Bushing/Mounting Style A Right angle RR 1/4-40 thread, .225" high Terminations 05 .110" quick connect 08 Right angle, PC thru-hole 02 PC Thru-hole WC Wire lead Contact Material B Gold Q Silver Seal NONE No seal E Epoxy
Dimensions are shown: Inches (mm) Specifications and dimensions subject to change
A–65
www.ittcannon.com
C&K KM Series Subminiature Pushbutton Switches
A Pushbutton
SWITCH FUNCTION
SWITCH FUNCTION POS. 1 POS. 2 CONNECTED TERMINALS POS. 1 POS. 2
NO. POLES
MODEL NO.
SCHEMATIC
KM11
SP
OFF
MOM.
OPEN
2-1
SPST N.O.
KM33
ON
MOM.
2-1
OPEN SPST N.C.
SPST
Part number shown: KM1101RR05BE
SP
KM12
ON
MOM.
2-1
4-3 SPDT
SPDT
Part number shown: KM1202A08BE
ACTUATOR
02
.398" HIGH, .122" DIA.
01
.122" DIA.
KM12 models only.
KM11 models only.
KM33 models only.
NOTE: Caps available for plunger options, see page A-68.
Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change
A–66
www.ittcannon.com
C&K KM Series Subminiature Pushbutton Switches
BUSHING/ MOUNTING STYLE
A
RIGHT ANGLE
A
1/4-40 THREAD, .225" HIGH
RR
Pushbutton
KM12 models only.
KM11 & KM33 models only.
PANEL MOUNTING
PC MOUNTING
KM11 & KM33 models. KM11 models only. KM12 models only.
TERMINATIONS
05
.110" QUICK CONNECT
08
RIGHT ANGLE, PC THRU-HOLE
02
PC THRU-HOLE
WC
WIRE LEAD
22 AWG insulated wire. KM12 models only. KM11 models only. UL style 1015.
CONTACT MATERIAL
OPTION CODE RoHS COMPLIANT * YES RoHS COMPATIBLE * YES CONTACT AND TERMINAL MATERIAL RATINGS
B Q
GOLD 1 SILVER 2
LOW LEVEL/DRY CIRCUIT
0.4 VA MAX. @ 20 V AC OR DC MAX. 0.25 AMPS @ 125 V AC OR DC (KM11, KM12) (UL) 1 AMP @ 125 V AC OR 28 V DC (KM33).
YES
YES
POWER
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1 STATIONARY
CONTACTS & TERMINALS: Copper, with gold plate over nickel plate. MOVABLE CONTACT: Phosphor bronze or beryllium copper, with gold plate over nickel plate. 2 STATIONARY CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options). MOVABLE CONTACT: Phosphor bronze or beryllium copper, silver plated. 3 STATIONARY CONTACTS & TERMINALS: Copper, with gold plate over nickel plate over silver plate. MOVABLE CONTACT: Phosphor bronze or beryllium copper, with gold plate over nickel plate over silver plate.
NOTE: Any models supplied with Q or B contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. KM11, KM12 models when ordered with ‘Q’ contact material.
SEAL
NONE
NO SEAL
E
EPOXY SEAL
Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change
A–67
www.ittcannon.com
C&K KM Series Subminiature Pushbutton Switches
A Pushbutton
Cap, KM33 models
AVAILABLE HARDWARE
Cap, KM11 models Cap, KM11 models
.245 DIA. (6,22 )
.187 (4,75)
.120 (3,05)
.200 DIA. (5,08 )
.375 DIA. (9,53 ) .250 (6,35)
.081 (2,03)
.155 (3,94)
.120 (3,05)
PART NO.
PART NO.
PART NO.
785101000 WHITE 785102000 BLACK 785103000 RED
Material: Nylon Finish: Gloss Cap, KM11 models
708901000 WHITE 708902000 BLACK 708903000 RED
Material: Nylon Finish: Gloss Cap, KM11 models
752701000 WHITE 752702000 BLACK 752703000 RED
Material: Nylon Finish: Gloss
.310 DIA. (7,87 ) .138 (3,51) .250 (6,35) .195 (4,95)
.450 SQ. (11,43) .240 (6,10)
PART NO.
PART NO.
PART NO.
801801000 WHITE 801802000 BLACK 801803000 RED
Material: Nylon Finish: Gloss
484601000 WHITE 484602000 BLACK 484603000 RED
Material: Nylon Finish: Gloss
798201000 WHITE 798202263 BLACK 798203000 RED
Material: Nylon Finish: Matte
NOTE: Other cap colors available, consult Customer Service Center.
Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change
A–68
www.ittcannon.com