KPT / KPSE / KPTC Connectors
In Accordance with VG95328
We Connect
When it matters most
For more than a century, ITT Cannon has developed innovative interconnect solutions for the world’s harshest
environments. With facilities in the United States, Germany, Italy, Mexico, China, and Japan, each with its unique strengths,
we offer our customers interconnect solutions that are truly Engineered for Life.
In addition to this truly global footprint, we offer highly specialized, segmented industry expertise. We have a proven track
record as an industry leader in harsh-environment applications. This has equipped us with the knowledge needed to
continue to produce the most resilient, reliable connectors for our customers’ most challenging conditions.
Interconnect solutions for the
harshest environments.
The ITT Cannon difference
• Global capabilities & local support
• Proven application expertise
• A century of interconnect leadership
• A committed innovator & business partner
About ITT
ITT is a diversified leading manufacturer of highly engineered
critical components and customized technology solutions
for the energy, transportation and industrial markets.
Building on its heritage of innovation, ITT partners with its
customers to deliver enduring solutions to the key industries
that underpin our modern way of life. Founded in 1920,
ITT is headquartered in Stamford, Connecticut, with
employees in more than 35 countries and sales in a total
of approximately 125 countries. For more information,
visit itt.com.
ittcannon.com
lndustrial / lnstrumentation
Rail
Defense Vehicles
Oil & Gas
Medical
Commercial & Military Aerospace
Our connector portfolio
remains the most extensive
Heavy Equipment
in the industry, offering a reliable and cost
effective range of interconnect solutions
ittcannon.com
3
Introduction to KPSE /KPT /KPTC
ITT Cannon’s KPSE / KPT and KPTC series of miniature positive bayonet locking
connectors offer a range of high-density signal solutions. They are designed
according to MIL-DTL-26482 series I or VG95328 – details below. Next to the
original use in military vehicles these connector series have become a standard
for industrial uses as eg. off-road vehicles, sensors, factory equipment and other
heavy industry applications.
All three product lines have specific characteristics and provide a set of unique variants, however, all lines are
fully intermateable with each other as well as any other connector series designed to MIL-DTL 26482 series I
or VG95328 standards.
Product Series
Origin
VG 95328 Approved
MIL-DTL 26482 Series I Approved
KPSE
German make/origin
Yes
No
KPSE
US make/origin
No
No
KPT
German make/origin
No
No
KPT
US make/origin
No
No
KPTC
German make/origin
No
No
KPSE is the high-performance crimp contact solution featuring a
clip-in retention system for fast and simple assembly. ITT Cannon
is approved to offer this line with VG marking according to
VG95328.
Common features of KPSE / KPT / KPTC:
➤ Intermateability with all product lines designed
to MIL-DTL-26482 Series I
➤ Environmental sealing to IP67 and IP68
➤ ½ turn positive bayonet coupling for quick mating
& unmating
➤ Shielded backshell accessories
➤ A range of RoHS compliant plating alternatives to
Cadmium including VG approved Tin Zinc, Nickel,
Zinc Nickel and Zinc Cobalt versions
➤ Customizing options
KPT is the first of two general duty series, and equipped with
solder pot contacts and glued in contacts. This makes this product
ideal for any prototype solution as well as for military
vehicle applications based on the MIL-DTL-268482 series I
standard.
KPTC is the second ITT Cannon general duty series with either
crimp or solder pot contact versions. In comparison this series
comes with a simpler design and avoids the high-performance
clip-in solution of KPSE as well as the glued contact assembly
of KPT which makes this line a good choice for many industrial
applications.
Both KPTC as well as KPT add typical industrial back shells to
their portfolio.
This document solely applies to European manufactured KPT / KPSE / KPTC products.
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
4
ittcannon.com
Contact Principle
CONTACT & SEALING PRINCIPLE
1
KPSE uses a three piece insulator stack up consisting of
2
1 - rubber insulator
2 - plastic wafer / retaining clips
3 - rubber grommet to seal individual wires
4 - two piece machined contact with retaining clip
3
4
Rubber insulator (1) and grommet (3) together with the front-sealing ring provide
the sealing in mated condition as well as the sealing of individual wires protruding
through the grommet.
Contact retention is provided using a two piece contact with retaining clip. The stiff
plastic wafer or individual metal clips provide the specified contact retention. A good
tactile response is given when contacts are pushed in the final assembly position.
Contacts are installed from the rear by hand or with an insertion tool to ease assembly.
Contact removal is done with an extraction tool from the front.
1
KPT uses a rubber insulator and sealing grommet
2
3
1 - rubber insulator
2 - rubber grommet to seal individual wires
3 - one piece machined contact
Rubber insulator (1) and grommet (2) together with the front sealing ring provide the
sealing in mated condition as well as the sealing of individual wires protruding through
the grommet.
Contact retention is provided by form fit of the machined contact in the rubber
insulator. Additionally, glue is applied to secure contacts in the exact mounting
position. KPT is equipped with solder pot contacts only and pre installed by the factory.
1
KPTC uses a rubber insulator and sealing grommet
2
3
1 - rubber insulator
2 - rubber grommet to seal individual wires
3 - one piece machined contact
Rubber insulator (1) and grommet (2) together with the front sealing ring
provide the sealing in mated condition as well as the sealing of individual wires
protruding through the grommet.
Contact retention is provided by form fit of the machined contact in the rubber
insulator. Solder pot contacts are pre-installed by the factory, crimp contacts are
delivered separately. Glue is not applied to KPTC connectors.
Contacts are installed from the rear with an insertion tool.
Contact removal is done with an extraction tool from the front.
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
ittcannon.com
5
Table of contents
Contact and sealing principle ................................. 5
How to use this catalogue....................................... 7
Product overview.................................................... 8
Panel cutouts........................................................ 10
Ordering reference................................................ 11
Contact arrangements........................................... 14
Alternate insert positions....................................... 17
Wall mounting receptacles.................................... 18
Cable connecting plugs......................................... 21
Box mounting receptacles..................................... 24
Thru-bulkhead receptacles..................................... 24
Straight plugs....................................................... 25
Jam nut receptacles............................................... 29
Right angle plugs.................................................. 31
Receptacles with PCB solder pins........................... 33
Accessories and tooling
Protective caps...................................................... 34
Dummy receptacle................................................ 36
Cross reference lists .............................................. 37
Tools and accessories ............................................ 38
Product safety information.................................... 41
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
6
ittcannon.com
How to use
This catalog is split in several sections that help you to
• get a general overview of all product lines (product overview)
• create a product part number step by step
(ordering reference)
• get all required detail information (dimensions, product details)
• get all required support products (accessories, tooling)
The fastest way to find your product of choice is to follow these steps
1
Select your product using the “ordering reference” option
3
Add accessories and tooling as required on the
related pages
2
Use the detail pages to better understand the available
options and choose the best solution for your needs
4
Use the contact information on the back cover to contact
us for further questions or to get advice on where you can
purchase our products
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
ittcannon.com
7
Product overview KPSE (VG95328), KPT, KPTC
Electrical Data
Contact rating at 60°C:
Size
Rated current A
Test current A
Millivolt drop mV
20
7,5
7,5
Less than 50
16
13,0
13,0
Less than 50
Current Rating
Current rating vs. ambient temperature:
Current Rating
13
13
12
12
11
11
10
Rated
current
Rated
current
in Ain A
10
9
89
78
Limit of
temperature
Limit of #20
Contact
temperature
67
56
Contact #16
#20
Contact
45
Contact #16
34
23
12
01
0
20
30
40
50
60
20
30
40
50
Ambient
Temperature
60
70
80 in °C
70
80
90
100
110
120
130
90
100
110
120
130
Ambient Temperature in °C
Comment for contact rating and current rating:
Rated current values shown are the max. current flowing continuously (not intermittently) through one contact pair with
the same cross section with regard to ambient temperature. If multiple contact pairs are loaded into a connector the
current rating curve has to be reduced.
Minimum air & creepage paths:
Contact to contact crimp
Contact to contact solder
Contact to shell
Service Class 1
1,9 mm
0,75 mm
1,0 mm
Service Class 2
2,8 mm
1,53 mm
2,8 mm
Insulation resistance: ~ 5000 MOhm
Operating voltage:
Service class
VG95328
MIL-C-26482
1
140 VDC/100 VAC
850 VDC/600 VAC
2
165 VDC/115 VAC
1400 VDC/1000 VAC
Comment: When connectors in this catalog are used at voltages exceeding > 50VAC / 75VDC safety provisions as
defined in the European low voltage directive 2014/35/EU have to be adhered to. For use in other regions see
appropriate local regulations.
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
8
ittcannon.com
Test voltage:
Test voltage
Service Class 1
21336 M/70,000ft.
Service class
Vrms
VDC
1
1500
2100
2
2300
3200
1
375
535
2
550
770
Mechanical data
Ambient temperature: -55°C … 125°C
Environmental sealing:
In mated condition for KPSE, KPT and KPTC product lines:
IP67 acc. ISO 20653
VG95328 connectors:
IP68 (0,2bar / 48h) – see below
According to VG95319 Part 2, Test No. 5.9.2 | For styles A to E and Z1, Z2 and Z3 and gaskets style A only, test pressure 0,2 bar overpressure,
test duartion 48h, test temperature 25±3°C, connector shall be free of moisture
Vibration test acc. VG95328:
Vibration stress 150 m/s2, 10 Hz to 2000 Hz
and Random vibration stress, 5 Hz to 500 Hz acc. test 5.52 VG95328-1
Mating cycles: 500
Material:
Shell
Aluminium alloy
Shell finishes
- Cadmium, VG approved - Tin Zinc, VG approved - ZnCobalt Black - Zinc Cobalt
Green - Zinc Nickel Blue Generation, for non-shielded versions - Nickel
Insulator
Polychloroprene
Grommet and seals
Contacts
Copper alloy, gold and silver plating
Product line design principles:
KPSE: Clip in crimp contact system, VG approved versions
KPT: Solder contacts, pre-installed and fixed with glue, VG approved versions
KPTC: Crimp contacts for tool insertion OR pre-installed solder contacts (not fixed with glue)
All further details, product line options etc. see following catalog pages
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
ittcannon.com
9
PANEL CUTOUTS KPT / KPSE / KPTC
BOX MOUNTING RECEPTACLE
Shell size
For rear mounting
For front mounting
Ø D +0,25 / 0
Ø D +0,25 / 0
R ±0,15
Ø T +0,3
8
14,0
12,7
15,1
3,1
10
17,0
16,0
18,3
3,1
12
22,0
19,0
20,6
3,1
14
25,0
22,2
23,0
3,1
16
28,0
25,5
24,6
3,1
18
31,0
28,5
27,0
3,1
20
34,5
31,7
29,4
3,1
22
37,5
35,0
31,8
3,1
24
41,0
38,0
34,9
3,6
PANEL THICKNESS
Shell size
P – Panel thickness
Height of screw head included
8
2,2
10
2,2
12
2,2
14
2,2
16
2,2
18
2,2
20
5,4
22
5,4
24
5,4
JAM NUT RECEPTACLE
Shell size
KPT / KPSE
Ø A +0,25 / –0
KPT / KPSE
B +0 / –0,12
8
14,5
13,6
10
17,7
16,8
12
22,7
21,2
14
25,7
24,1
16
28,8
27,2
18
32,0
30,4
20
35,1
33,6
22
38,4
36,8
24
41,5
40,0
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
10
ittcannon.com
How to order
Cannon Order reference
KPT / KPSE / KPTC
KP.. 02 E 22 – 36 P W *
Series
KPSE – Cannon prefix crimp, contacts supplied
KPT – Cannon prefix solder, contacts installed
KPTC – Cannon prefix commercial version, contacts to be ordered separately.
See modification codes for contact options
Shell type (See note below)
Cannon designation omit 0 in case of a mod code and KPTC
00 – wall mounting receptacle
see page 18-20
01 – cable connecting plug
see page 21-23
02 – box mounting receptacle (class E only).
see page 24
06 – straight plug
see page 25-28
07 – jam nut receptacle
see page 29-31
08 – 90° angle plug
see page 31
KPTB - thru-bulkhead receptacle
see page 24
Class
A – Endbell with thread, no grommet seal; for jam nut: without endbell
E – Pressure nut and grommet seal - for 90° versions: endbell with thread, and grommet seal
– with modification DN: Endbell for heat shrink boot and grommet seal
– with modifiction DT: Banding adapter for heat shrink boot and grommet seal, shielded
– with modification DZ: Endbell for heat shrink boot and grommet seal, shielded
F – Endbell with cable clamp and grommet seal
PG – endbell for PG glands
ME – endbell for metric glands
Shell size
8 – 24
Contact arrangement
see page 14-16
Contact type
P – pin
S – socket
Alternate insert position
W, X, Y and Z (omit for normal position)
see page 17
Modification
see page 12
Note:
* If a modification is used the initial ‚0‘ in the shell style description is omitted e.g. KPT01E10-6P is changed to KPT1E10-6P-DN.
KPTC series does not use the initial ‚0‘ e.g. KPTC6E10-6P-C.
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
ittcannon.com
11
Modification Codes
KPT:
KPSE:
Multiple codes can be used in
order of listing below:
Multiple codes can be used in
order of listing below:
Contact
Endbell
PCB solder pin 0,76 x 7mm
(style 02 and 07 only)
EX
heat shrink boot adapter, grommet seal
PCB solder pin 0,6 x 7mm
(style 02 and 07 only)
EW
Endbell
heat shrink boot adapter, grommet seal
DN
Banding adapter for heat shrink boot
and grommet seal, shielded
DT
shielded, heat shrink boot
adapter, grommet seal
DZ
without endbell, grommet and ferrule
F42*
Multiple codes can be used in
order of listing below:
Plating
DN
Nickel plating (RoHS compliant)
C
Banding adapter for heat shrink boot
and grommet seal, shielded
DT
Tin Zinc Matt Grey plating
(VG approved / RoHS compliant)
G
shielded, heat shrink boot adapter,
grommet seal
DZ
Zinc Cobalt black plating
(RoHS compliant)
R
without endbell, grommet and ferrule
F42*
Endbell for PG cable gland, class PG only
PG09 thread for connectors
with shell size 10
P9
PG11 thread for connectors
with shell size 12
P11
PG13,5 thread for connectors
with shell size 14
Endbell for PG cable gland, class PG only
KPTC:
P13,5
PG09 thread for connectors
with shell size 10
P9
PG16 thread for connectors
with shell size 16
P16
PG11 thread for connectors
with shell size 12
P11
PG21 thread for connectors
with shell size 18, 20, 22
P21
P13,5
PG29 thread for connectors
with shell size 24
P29
PG13,5 thread for connectors
with shell size 14
PG16 thread for connectors
with shell size 16
P16
PG21 thread for connectors
with shell size 18, 20, 22
P21
M12 thread for connectors
with shell size 10
M12
PG29 thread for connectors
with shell size 24
P29
M16 thread for connectors
with shell size 12
M16
M20 thread for connectors
with shell size 16
M20
Endbell for Metric cable gland, class ME only
Endbell for Metric cable gland, class ME only
M12 thread for connectors
with shell size 10
M12
M25 thread for connectors
with shell size 18, 20
M25
M16 thread for connectors
with shell size 12
M16
M32 thread for connectors
with shell size 22, 24
M32
M20 thread for connectors
with shell size 16
M20
M25 thread for connectors
with shell size 18, 20
M25
Plating (Cadmium with olive drab chromate
plating is standard - without code;
Alternative platings below)
M32
Tin Zinc Matt Grey plating
(VG approved / RoHS compliant)
A241
Zinc Cobalt, black plating (RoHS
compliant)
A232
Zinc Nickel plating (RoHS compliant)
Nickel plating (RoHS compliant)
M32 thread for connectors
with shell size 22, 24
Plating (Cadmium with olive drab chromate
plating is standard - without code;
Alternative platings below)
Tin Zinc Matt Grey plating
(VG approved / RoHS compliant)
A241
Zinc Cobalt, black plating (RoHS
compliant)
A232
Zinc Nickel plating (RoHS compliant)
A240
Nickel plating (RoHS compliant)
A34
An example using these modifications:
KPT2E10-6P-EW-A232
H
Cadmium with olive drab chromate
D
Endbell
heat shrink boot adapter, grommet seal
DN
Banding adapter for heat shrink boot
and grommet seal, shielded
DT
shielded, heat shrink boot adapter,
grommet seal
DZ
without endbell, grommet and ferrule
F42*
Endbell for PG cable gland, class PG only
PG09 thread for connectors
with shell size 10
P9
PG11 thread for connectors
with shell size 12
P11
PG13,5 thread for connectors
with shell size 14
P13,5
PG16 thread for connectors
with shell size 16
P16
PG21 thread for connectors
with shell size 18, 20, 22
P21
PG29 thread for connectors
with shell size 24
P29
Endbell for Metric cable gland, class ME only
M12 thread for connectors
with shell size 10
M12
M16 thread for connectors
with shell size 12
M16
M20 thread for connectors
with shell size 16
M20
M25 thread for connectors
with shell size 18, 20
M25
A240
M32 thread for connectors
with shell size 22, 24
M32
A34
Contact
Contact
Connector without contacts
Zinc Nickel plating (RoHS compliant)
F0
An example using these modifications:
KPSE7F16-8S-A240-F0
Connector supplied with solder
pot contacts installed
MA
Connector supplied with crimp contacts
MB
PCB solder pin 0,76 x 7mm
(style 02 and 07 only)
EX
PCB solder pin 0,6 x 7mm
(style 02 and 07 only)
EW
* Note: Modification -F42 can only be used with Styles
0, 1, 6, 7 and 8. See details on pg 13
An example using these modifications:
KPTC6F14-18P-H-MB
* Note: Modification -F42 can only be used with Styles
0, 1, 6, 7 and 8. See details on pg 13
* Note: Modification -F42 can only be used with Styles
0, 1, 6, 7 and 8. See details on pg 13
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
12
ittcannon.com
Endbell Modification -F42
Below table shows the different threads that come with the respective shell sizes when choosing the modification
-F42 (no endbell/grommet seal). This modification is only applicable to styles 0 (wall mounting receptacle),
1 (cable connecting plug), 6 (straight plug) and 8 (90° angle plug). The only exception being KP*7A, as this
combination already has no endbell/grommet.
Shell size
Thread
8
7/16-28UNEF
10
9/16-24UNEF
12
11/16-24UNEF
14
13/16-20UNEF
16
15/16-20UNEF
18
1-1/16-18UNEF
20
1-3/16-18UNEF
22
1-5/16-18UNEF
24
1-7/16-18UNEF
Drawing shows KP*1 Style
How to order
VG Order reference
VG95328 A 18 – 1 S N 1 J
Specification
Shell type
see page 36
A – wall mounting receptacle with straight endbell
B – wall mounting receptacle with cable clamp
C – box mounting receptacle
D – jam nut receptacle
E – jam nut receptacle with cable clamp
J – straight plug with adapter DN
K – straight plug with cable clamp
M – straight plug, version DZ
R – wall mounting receptacle, version DZ
S – jam nut receptacle with adapter DN
Shell size 8, 10, 12, 14, 16, 18, 20, 22 and 24
Contact arrangements
see page 14-16
Contact type P – pin S – socket
Alternate insert position
see page 17
With / without contacts
Without identification = with contacts
With -1 identification = without contacts
Plating
Without identification = Cadmium, VG approved
Identification ‘J’ = RoHS, Matt Grey SnZn plating, VG approved
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
ittcannon.com
13
CONTACT ARRANGEMENTS
View on mating face
of pin insulator
Contact arrangements
Insulator position
No. of contacts
Contact size
AWG
Service rating
2
8-2
20
3
W
X
Y
Z
1
58
122
–
–
8-3
20
1
60
210
–
–
3
8-3A
20
1
60
210
–
–
3
8-33
20
1
90
–
–
–
4
8-4
20
1
45
–
–
–
6
10-6
20
1
90
–
–
–
10-7
20
1
90
–
–
–
7
6
10-98
20
1
90
180
240
270
3
12-3
16
2
–
–
180
–
8
12-8
20
1
90
112
203
292
10
12-10
20
1
60
155
270
295
14
12-14
20
1
60
155
270
295
5
14-5
16
2
40
92
184
273
12
14-12
20 (8)
16 (4)
1
43
90
–
–
Legend KPT KPSE
KPTC
authorized per VG95328
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
14
ittcannon.com
CONTACT ARRANGEMENTS
View on mating face
of pin insulator
Contact arrangements
No. of contacts
Contact size
AWG
Insulator position
Service rating
W
X
Y
Z
15
14-15
20 (14)
16 (1)
1
17
110
155
234
18
14-18
20
1
15
90
180
270
19
14-19
20
1
30
165
315
–
5
14-22
12 (4)
20 (1)
1
–
–
–
–
4
14A4
Coax RG 188 U
1
–
–
–
–
8
16-8
16
2
54
152
180
331
23
16-23
20 (22)
16 (1)
1
158
–
–
–
26
16-26
20
1
60
–
275
338
11
18-11
16
2
62
119
241
340
32
18-32
20
1
85
138
222
265
(not for receptacle
shell style 02)
Legend KPT KPSE
KPTC
authorized per VG95328
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
ittcannon.com
15
CONTACT ARRANGEMENTS
View on mating face
of pin insulator
Contact arrangements
No. of contacts
Contact size
AWG
Insulator position
Service rating
W
X
Y
Z
20A6
12
2
90
180
270
–
16
20-16
16
2
238
318
333
347
24
20-24
20
1
70
145
215
290
39
20-39
20 (37)
16 (2)
1
63
144
252
333
41
20-41
20
1
45
126
225
w–
21
22-21
16
2
16
135
175
349
36
22-36
20
1
72
144
216
288
41
22-41
20 (27)
16 (14)
39
135
264
–
55
22-55
20
1
30
142
226
314
61
24-61
20
1
90
180
270
324
5
Note: contacts are 1 grounding pin and 4
standard size 12 pins
1
2
Legend KPT KPSE
KPTC
authorized per VG95328
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
16
ittcannon.com
ALTERNATE INSERT POSITION
The diagram indicates alternate insert
positions.
The six positions N, V, W, Y, Z differ in
degree of rotation for various sizes and
arrangements. For the exact degree of
rotation, for the list of contact arrangements
and for alternate positions available, refer to
the table at the right.
Shell size
Degree of Rotation
No. of contacts
Contact
arrangements
V
W
X
Y
Z
2
8-2
–
58
122
–
–
3
8-3
–
60
210
–
–
3
8-3A
–
60
–
–
–
3
8-33
–
90
–
–
–
4
8-4
–
45
–
–
–
6
10-6
–
90
–
–
–
7
10-7
–
90
–
–
–
6
10-98
–
90
180
240
270
3
12-3
–
–
–
180
–
8
12-8
–
90
112
203
292
10
12-10
–
60
155
270
295
14
12-14
–
60
155
270
295
4
14A4
–
–
–
–
–
5
14-5
–
40
92
184
273
12
14-12
–
43
90
–
–
15
14-15
–
17
110
155
234
18
14-18
–
15
90
180
270
19
14-19
–
30
165
315
–
5
14-22
–
–
–
–
–
8
16-8
–
54
52
180
331
23
16-23
–
158
–
–
–
26
16-26
–
60
–
275
338
11
18-11
–
62
119
241
340
32
18-32
–
85
138
222
265
5
20A6*
–
90
180
270
–
16
20-16
–
238
318
333
347
24
20-24
–
70
145
215
290
39
20-39
–
63
144
252
333
41
20-41
–
45
126
225
–
21
22-21
–
16
135
175
349
36
22-36
–
72
144
216
288
41
22-41
–
39
135
264
–
55
22-55
–
30
142
226
314
61
24-61
–
90
180
270
324
8
10
12
14
16
18
20
22
24
* This contact arrangement features five contacts size 12. Four standard contacts and one is a first-to-mate contact.
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
ittcannon.com
17
WALL MOUNTING RECEPTACLES KPT00A / KPSE00A / KPTC0A
Description: Wall Mounting
Receptacle with an endbell with
thread, no grommet seal.
Shell size
ØA
+0,03 – 0,13
K
±0,1
M
±0,15
R
±0,15
S
max.
ØT
±0,15
Ø DA
min.
LA
max.
VTHD
Thread Type 2A
8
12,00
1,9
11,6
15,1
21,0
3,05
8,5
38,0
1/2-28UNEF
10
15,00
1,9
11,6
18,3
24,2
3,05
11,8
38,0
5/8-24UNEF
12
19,05
1,9
11,6
20,6
26,6
3,05
15,0
38,0
3/4-20UNEF
14
22,23
1,9
11,6
23,0
29,0
3,05
17,9
38,0
7/8-20UNEF
16
25,40
1,9
11,6
24,6
31,3
3,05
21,1
38,0
1-20UNEF
18
28,58
1,9
11,6
27,0
33,7
3,05
24,1
38,0
1-3/16-18UNEF
20
31,75
2,2
14,25
29,4
36,9
3,05
26,5
43,1
1-3/16-18UNEF
22
34,93
2,2
14,25
31,8
40,1
3,05
30,4
43,1
1-7/16-18UNEF
24
38,10
2,2
15,1
34,9
43,3
3,75
32,8
43,1
1-7/16-18UNEF
WALL MOUNTING RECEPTACLES KPT00E / KPSE00E (VG95328A) / KPTC0E
Description: Wall Mounting
Receptacle with pressure nut
and grommet seal.
Shell size
ØA
+0,03 – 0,13
K
±0,1
M
±0,15
R
±0,15
S
max.
ØT
±0,15
Ø BE
max.
LE
max.
8
12,00
1,9
11,6
15,1
21,0
3,05
14,2
32,5
10
15,00
1,9
11,6
18,3
24,2
3,05
17,2
32,5
12
19,05
1,9
11,6
20,6
26,6
3,05
20,4
32,5
14
22,23
1,9
11,6
23,0
29,0
3,05
23,4
32,5
16
25,40
1,9
11,6
24,6
31,3
3,05
26,6
32,5
18
28,58
1,9
11,6
27,0
33,7
3,05
29,6
32,5
20
31,75
2,2
14,25
29,4
36,9
3,05
32,8
34,5
22
34,93
2,2
14,25
31,8
40,1
3,05
36,0
34,5
24
38,10
2,2
15,1
34,9
43,3
3,75
39,2
34,5
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
18
ittcannon.com
WALL MOUNTING RECEPTACLES KPT00F / KPSE00F (VG95328B) / KPTC0F
Description: Wall Mounting
Receptacle with endbell, cable
clamp and grommet seal.
Shell size
ØA
+0,03 – 0,13
K
±0,1
M
±0,15
R
±0,15
S
max.
ØT
±0,15
Ø GF
min.
HF
max.
LF
max.
8
12,00
1,9
11,6
15,1
21,0
3,05
2,9
19,3
56,0
10
15,00
1,9
11,6
18,3
24,2
3,05
4,5
20,8
56,0
12
19,05
1,9
11,6
20,6
26,6
3,05
7,7
24,4
56,0
14
22,23
1,9
11,6
23,0
29,0
3,05
9,3
27,2
56,0
16
25,40
1,9
11,6
24,6
31,3
3,05
12,4
28,7
56,0
18
28,58
1,9
11,6
27,0
33,7
3,05
15,6
35,3
56,0
20
31,75
2,2
14,25
29,4
36,9
3,05
15,6
35,3
61,0
22
34,93
2,2
14,25
31,8
40,1
3,05
18,8
39,9
61,0
24
38,10
2,2
15,1
34,9
43,3
3,75
20,1
43,2
61,0
WALL MOUNTING RECEPTACLES KPT0E...DN / KPSE0E...DN / KPTC0E...DN
Description: Wall Mounting
Receptacle with endbell for heat
shrink boot and grommet seal.
Shell size
ØA
+0,03 – 0,13
K
±0,1
M
±0,15
R
±0,15
S
max.
ØT
±0,15
Ø D2
–0,5
L1
max.
L2
±0,5
8
12,00
1,9
11,6
15,1
21,0
3,05
15,6
35,0
12,2
10
15,00
1,9
11,6
18,3
24,2
3,05
18,4
35,0
12,2
12
19,05
1,9
11,6
20,6
26.6
3,05
23,7
35,0
12,2
14
22,23
1,9
11,6
23,0
29,0
3,05
24,5
35,0
12,2
16
25,40
1,9
11,6
24,6
31,3
3,05
29,8
37,0
14,5
18
28,58
1,9
11,6
27,0
33,7
3,05
32,0
37,0
14,5
20
31,75
2,2
14,25
29,4
36,9
3,05
36,1
42,0
15,8
22
34,93
2,2
14,25
31,8
40,1
3,05
38,5
42,0
15,8
24
38,10
2,2
15,1
34,9
43,3
3,75
41,6
42,0
14,9
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
ittcannon.com
19
WALL MOUNTING RECEPTACLES KPT0E...DZ / KPSE0E...DZ (VG95328R) / KPTC0E…DZ
Description: Wall Mounting Receptacle
with endbell for heat shrink boot and
grommet seal, shielded.
Shell size
ØA
+0,03 – 0,13
ØB
min.
ØC
±0,5
ØD
max.
E
±1,0
K
±0,1
L
max.
M
±0,15
R
±0,15
S
max.
ØT
±0,15
8
12,00
6,6
16,0
13,3
15,0
1,9
52,0
11,6
15,1
21,0
3,05
10
15,00
9,2
18,0
16,1
15,0
1,9
52,0
11,6
18,3
24,2
3,05
12
19,05
12,2
22,0
20,0
17,0
1,9
52,0
11,6
20,6
26,6
3,05
14
22,23
15,2
25,0
22,2
18,0
1,9
53,0
11,6
23,0
29,0
3,05
16
25,40
18,3
28,0
26,2
18,0
1,9
53,0
11,6
24,6
31,3
3,05
18
28,58
20,0
32,0
28,5
18,0
1,9
53,0
11,6
27,0
33,7
3,05
20
31,75
23,0
34,0
32,5
18,0
2,2
58,0
14,25
29,4
36,9
3,05
22
34,93
26,0
38,0
34,8
18,0
2,2
58,0
14,25
31,7
40,1
3,05
24
38,10
28,8
41,0
37,9
18,0
2,2
58,0
15,1
34,9
43,3
3,75
WALL MOUNTING RECEPTACLE WITH BANDING ADAPTER KPSE0 / KPT0 / KPTC0 … DT
Description: Wall Mounting Receptacle
with banding adapter for heat shrink
boot and grommet seal, shielded.
Shell size
ØA
+0,03 – 0,13
ØB
±0.2
ØC
±0.2
ØD
±0.2
K
±0.1
L
max.
M
±0.15
R
±0.15
S
max.
ØT
±0,15
8
12.0
8.2
13.1
15.35
1.9
39.3
11.6
15.0
21.0
3.05
10
15.0
11.4
15.9
18.15
1.9
39.3
11.6
18.3
24.2
3.05
12
19.05
14.5
21.2
23.45
1.9
40.1
11.6
20.6
26.6
3.05
14
22.23
17.4
22.0
24.25
1.9
40.1
11.6
23.00
29.0
3.05
16
25.40
20.7
26.0
29.55
1.9
40.1
11.6
24.6
31.3
3.05
18
28.58
23.2
28.2
31.75
1.9
40.1
11.6
27.0
33.7
3.05
20
31.75
26.4
32.3
35.85
2.2
43.4
14.25
29.4
36.9
3.05
22
34.93
29.5
34.6
38.25
2.2
43.4
14.25
31.8
40.1
3.05
24
38.10
32.7
37.7
41.35
2.2
45.3
14.25
34.9
43.3
3.75
For corresponding tooling and banding, please contact the factory for assembly instructions CAS25098
Banding adapters should be used for individual wires only. For use with jacketed cables consult factory.
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
20
ittcannon.com
CABLE CONNECTING RECEPTACLES KPT01A / KPSE01A / KPTC1A
Description: Cable connecting
receptacle with an endbell with
thread, no grommet seal.
Shell size
ØA
+0,03 – 0,13
K
±0,1
M
±0,15
S
max.
ØY
±0.2
Ø DA
min.
LA
max.
VTHD
Thread Type 2A
8
12,00
1,9
11,6
21,0
23,8
8,5
38,0
1/2-28UNEF
10
15,00
1,9
11,6
24,2
26,9
11,8
38,0
5/8-24UNEF
12
19,05
1,9
11,6
26,55
29,3
15,0
38,0
3/4-20UNEF
14
22,23
1,9
11,6
28,9
31,7
17,9
38,0
7/8-20UNEF
16
25,40
1,9
11,6
31,3
34,1
21,1
38,0
1-20UNEF
18
28,58
1,9
11,6
33,7
36,5
24,1
38,0
1-3/16-18UNEF
20
31,75
2,2
14,25
36,9
39,6
26,5
43,1
1-3/16-18UNEF
22
34,93
2,2
14,25
40,0
42,8
30,4
43,1
1-7/16-18UNEF
24
38,10
2,2
15,1
43,2
46,0
32,8
43,1
1-7/16-18UNEF
CABLE CONNECTING RECEPTACLES KPT01E / KPSE01E / KPTC1E
Description: Cable connecting
receptacle with pressure nut and
grommet seal.
Shell size
ØA
+0,03 – 0,13
K
±0,1
M
±0,15
S
max.
ØY
±0.2
Ø BE
max.
LE
max.
8
12,00
1,9
11,6
21,0
23,8
14,2
32,5
10
15,00
1,9
11,6
24,2
26,9
17,2
32,5
12
19,05
1,9
11,6
26,55
29,3
20,4
32,5
14
22,23
1,9
11,6
28,9
31,7
23,4
32,5
16
25,40
1,9
11,6
31,3
34,1
26,6
32,5
18
28,58
1,9
11,6
33,7
36,5
29,6
32,5
20
31,75
2,2
14,25
36,9
39,6
32,8
34,5
22
34,93
2,2
14,25
40,0
42,8
36,0
34,5
24
38,10
2,2
15,1
43,2
46,0
39,2
34,5
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
ittcannon.com
21
CABLE CONNECTING RECEPTACLES KPT01F / KPSE01F / KPTC1F
Description: Cable connecting
receptacle with endbell, cable
clamp and grommet seal.
Shell size
ØA
+0,03 – 0,13
K
±0,1
M
±0,15
S
max.
ØY
±0.2
Ø GF
min.
HF
max.
LF
max.
8
12,00
1,9
11,6
21,0
23,8
2,9
19,3
56,0
10
15,00
1,9
11,6
24,2
26,9
4,5
20,8
56,0
12
19,05
1,9
11,6
26,55
29,3
7,7
24,4
56,0
14
22,23
1,9
11,6
28,9
31,7
9,3
27,2
56,0
16
25,40
1,9
11,6
31,3
34,1
12,4
28,7
56,0
18
28,58
1,9
11,6
33,7
36,5
15,6
35,3
56,0
20
31,75
2,2
14,25
36,9
39,6
15,6
35,3
61,0
22
34,93
2,2
14,25
40,0
42,8
18,8
39,9
61,0
24
38,10
2,2
15,1
43,2
46,0
20,1
43,2
61,0
CABLE CONNECTING RECEPTACLES KPT1E...DN / KPSE1E...DN / KPTC1E...DN
Description: Cable connecting
receptacle with endbell for heat
shrink boot and grommet seal.
Shell size
ØA
+0,03 – 0,13
K
±0,1
M
±0,15
S
max.
ØY
±0.2
Ø D2
–0,5
L1
max.
L2
±0,5
8
12,00
1,9
11,6
21,0
23,8
15,6
35,0
12,2
10
15,00
1,9
11,6
24,2
26,9
18,4
35,0
12,2
12
19,05
1,9
11,6
26,55
29,3
23,7
35,0
12,2
14
22,23
1,9
11,6
28,9
31,7
24,5
35,0
12,2
16
25,40
1,9
11,6
31,3
34,1
29,8
37,0
14,5
18
28,58
1,9
11,6
33,7
36,5
32,0
37,0
14,5
20
31,75
2,2
14,25
36,9
39,6
36,1
42,0
15,8
22
34,93
2,2
14,25
40,0
42,8
38,5
42,0
15,8
24
38,10
2,2
15,1
43,2
46,0
41,6
42,0
14,9
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
22
ittcannon.com
CABLE CONNECTING RECEPTACLES KPT1E...DZ / KPSE1E...DZ / KPTC1E...DZ
Description: Cable connecting receptacle
with endbell for heat shrink boot and
grommet seal, shielded.
Shell size
ØA
+0,03 – 0,13
M
±0,15
ØB
min.
ØC
±0,5
ØD
max.
E
±1,0
K
±0,1
L
max.
S
max.
ØY
±0.2
8
12,00
11,6
6,6
16,0
13,3
15,0
1,9
52,0
21,0
23,8
10
15,00
11,6
9,2
18,0
16,1
15,0
1,9
52,0
24,2
26,9
12
19,05
11,6
12,2
22,0
20,0
17,0
1,9
52,0
26,55
29,3
14
22,23
11,6
15,2
25,0
22,2
18,0
1,9
53,0
28,9
31,7
16
25,40
11,6
18,3
28,0
26,2
18,0
1,9
53,0
31,3
34,1
18
28,58
11,6
20,0
32,0
28,5
18,0
1,9
53,0
33,7
36,5
20
31,75
14,25
23,0
34,0
32,5
18,0
2,2
58,0
36,9
39,6
22
34,93
14,25
26,0
38,0
34,8
18,0
2,2
58,0
40,0
42,8
24
38,10
14,25
28,8
41,0
37,9
18,0
2,2
58,0
43,2
46,0
CABLE CONNECTING RECEPTACLES KPSE1 / KPT1 / KPTC1 … DT
Description: Cable connecting receptacle
with banding adapter for heat shrink
boot and grommet seal, shielded.
Shell size
ØA
+0,03 – 0,13
ØB
±0.2
ØC
±0.2
ØD
±0.2
K
±0.1
L
max.
M
±0.15
S
max.
ØY
±0.2
8
12.0
8.2
13.1
15.35
1.9
39.3
11.6
21,0
23,8
10
15.0
11.4
15.9
18.15
1.9
39.3
11.6
24,2
26,9
12
19.05
14.5
21.2
23.45
1.9
40.1
11.6
26,55
29,3
14
22.23
17.4
22.0
24.25
1.9
40.1
11.6
28,9
31,7
16
25.40
20.7
26.0
29.55
1.9
40.1
11.6
31,3
34,1
18
28.58
23.2
28.2
31.75
1.9
40.1
11.6
33,7
36,5
20
31.75
26.4
32.3
35.85
2.2
43.4
14.25
36,9
39,6
22
34.93
29.5
34.6
38.25
2.2
43.4
14.25
40,0
42,8
24
38.10
32.7
37.7
41.35
2.2
45.3
14.25
43,2
46,0
For corresponding tooling and banding, please contact the factory for assembly instructions CAS25098
Banding adapters should be used for individual wires only. For use with jacketed cables consult factory.
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
ittcannon.com
23
BOX MOUNTING RECEPTACLES KPT02E (VG95328H) / KPSE02E (VG95328C) / KPTC2E
Description: box mounting
receptacle with through
holes in flange.
KPT / KPSE / KPTC
KPT / KPTC
Shell size
ØA
+0,03 – 0,13
L
max.
ØN
max.
K
±0,1
M
±0,15
R
±0,15
S
max.
ØT
±0,15
Z
max.
8
12,00
21,1
11,1
1,9
11,6
15,1
21,0
3,05
12,3
10
15,00
21,1
14,3
1,9
11,6
18,3
24,2
3,05
12,3
12
19,05
21,1
17,5
1,9
11,6
20,6
26,6
3,05
12,3
14
22,23
21,1
20,6
1,9
11,6
23,0
29,0
3,05
12,3
16
25,40
21,1
23,8
1,9
11,6
24,6
31,3
3,05
12,3
18
28,58
21,1
27,0
1,9
11,6
27,0
33,7
3,05
12,3
20
31,75
22,7
30,2
2,2
14,25
29,4
36,9
3,05
10,8
22
34,93
22,7
33,4
2,2
14,25
31,8
40,1
3,05
10,8
24
38,10
22,7
36,5
2,2
15,1
34,9
43,3
3,75
10,0
THRU-BULKHEAD RECEPTACLES KPTB (VG95328P)
Description: Bulkhead receptacle
with mounting flange – with
through holes.
Socket on
this side
Pin on
this side
INSERT: For example: KPTB14-19PS
Shell size
ØA
+0,03 – 0,13
K
±0,1
L
max
M
±0,25
T
max
R
±0,15
S
max.
ØX
±0,5
8
12,00
1,8
28,6
14,5
6,0
15,1
21,0
3,05
10
15,00
1,8
28,6
14,5
6,0
18,3
24,2
3,05
12
19,05
1,8
28,6
14,5
6,0
20,6
26,6
3,05
14
22,23
1,8
28,6
14,5
6,0
23,0
29,0
3,05
16
25,40
1,8
28,6
14,5
6,0
24,6
31,3
3,05
18
28,58
1,8
28,6
14,5
6,0
27,0
33,7
3,05
20
31,75
2,5
31,9
17,7
9,2
29,4
36,9
3,05
22
34,93
2,5
31,9
17,7
9,2
31,8
40,1
3,05
24
38,10
2,5
31,9
17,7
8,0
34,9
43,3
3,75
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
24
ittcannon.com
STRAIGHT PLUGS KPT06A / KPSE06A / KPTC6A
Description: Straight plug with
an endbell with thread, no
grommet seal.
Shell size
ØG
max.
Ø DA
min.
LA
max.
VTHD
Thread Type 2A
8
19,8
8,5
42,0
1/2-28UNEF
10
23,6
11,8
42,0
5/8-24UNEF
12
26,5
15,0
42,0
3/4-20UNEF
14
30,1
17,9
42,0
7/8-20UNEF
16
33,2
21,1
42,0
1-20UNEF
18
35,4
24,1
42,0
1-3/16-18UNEF
20
39,0
26,5
45,0
1-3/16-18UNEF
22
42,1
30,4
45,0
1-7/16-18UNEF
24
45,2
32,8
45,0
1-7/16-18UNEF
STRAIGHT PLUGS KPT06E / KPSE06E / KPTC6E
Description: Straight plug with
pressure nut and grommet seal.
Shell size
ØG
max.
Ø BE
max.
8
19,8
14,2
32,5
10
23,6
17,2
32,5
12
26,5
20,4
32,5
14
30,1
23,4
32,5
16
33,2
26,6
32,5
18
35,4
29,6
32,5
20
39,0
32,8
34,5
22
42,1
36,0
34,5
24
45,2
39,2
34,5
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
ittcannon.com
LE
max.
25
STRAIGHT PLUGS KPT06F / KPSE06F (VG95328K) / KPTC6F
Description: Straight plug
with endbell, cable clamp and
grommet seal.
Shell size
ØG
max.
Ø GF
min.
HF
max.
LF
max.
8
19,8
2,9
19,3
56,0
10
23,6
4,5
20,8
56,0
12
26,5
7,7
24,4
56,0
14
30,1
9,3
27,2
56,0
16
33,2
12,4
28,7
59,0
18
35,4
15,6
35,3
59,0
20
39,0
15,6
35,3
59,0
22
42,1
18,8
39,9
59,0
24
45,2
20,1
43,2
59,0
L1
max.
L2
±0,5
STRAIGHT PLUGS KPT6E...DN / KPSE6E...DN(VG95328J) / KPTC6E...DN
Description: Straight plug with
endbell for heat shrink boot and
grommet seal.
Shell size
ØG
max.
Ø D2
–0,5
8
19,8
15,6
35,0
12,2
10
23,6
18,4
35,0
12,2
12
26,5
23,7
35,0
12,2
14
30,1
24,5
35,0
12,2
16
33,2
29,8
37,0
14,5
18
35,4
32,0
37,0
14,5
20
39,0
36,1
42,0
15,8
22
42,1
38,5
42,0
15,8
24
45,2
41,6
42,0
14,9
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
26
ittcannon.com
STRAIGHT PLUGS KPT6E...DZ / KPSE6E...DZ (VG95328M) / KPTC6E…DZ
Description: Straight plug with
endbell for heat shrink boot and
grommet seal, shielded.
Shell size
ØB
min.
ØC
+0,5
ØG
max.
ØD
max.
E
1,0
L
max.
S
+0,2
8
6,6
16,0
19,1
13,3
15,0
48,0
17,00
10
9,2
18,0
22,0
16,1
15,0
48,0
19,00
12
12,2
22,0
26,2
20,0
17,0
48,0
23,00
14
15,2
25,0
29,4
22,2
18,0
49,0
26,00
16
18,3
28,0
32,8
26,2
18,0
49,0
29,00
18
20,0
32,0
35,4
28,5
18,0
49,0
33,00
20
23,0
34,0
39,0
32,5
18,0
53,0
35,00
22
26,0
38,0
42,1
34,8
18,0
53,0
39,00
24
28,8
41,0
45,2
37,9
18,0
53,0
42,00
STRAIGHT PLUGS KPSE6 / KPT6 / KPTC6 … DT
Description: Straight Plug with
banding adapter for heat shrink boot
and grommet seal, shielded.
Shell size
ØA
+0,03 – 0,13
ØB
±0.2
ØC
±0.2
ØD
±0.2
K
±0.1
L
max.
M
±0.15
S
max.
ØT
±0,15
8
12.0
8.2
13.1
15.35
1.9
39.3
11.6
20.6
23.8
10
15.0
11.4
15.9
18.15
1.9
39.3
11.6
23.8
26.9
12
19.05
14.5
21.2
23.45
1.9
40.1
11.6
26.15
29.3
14
22.23
17.4
22.0
24.25
1.9
40.1
11.6
28.5
31.7
16
25.40
20.7
26.0
29.55
1.9
40.1
11.6
30.7
34.1
18
28.58
23.2
28.2
31.75
1.9
40.1
11.6
33.3
36.5
20
31.75
26.4
32.3
35.85
2.2
43.4
14.25
36.91
39.6
22
34.93
29.5
34.6
38.25
2.2
43.4
14.25
40.08
42.8
24
38.10
32.7
37.7
41.35
2.2
45.3
14.25
42.8
46.0
For corresponding tooling and banding, please contact the factory for assembly instructions CAS25098
Banding adapters should be used for individual wires only. For use with jacketed cables consult factory.
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
ittcannon.com
27
STRAIGHT PLUG KPT6PG / KPTC6PG
Description: Straight plug with
adapter for PG gland nut.
Gland nut is not included.
Shell size
ØG
max.
ØB
max.
C
min.
LPG
max.
PGTHD
10
23,6
19,0
10,5
58,5
PG 09
12
26,5
22,5
10,5
58,5
PG 11
14
30,1
25,0
10,5
58,5
PG 13,5
16
33,2
28,0
10,5
73,0
PG 16
18
35,4
32,5
11,5
73,0
PG 21
20
39,0
34,5
11,5
76,0
PG 21
22
42,1
38,0
11,5
82,0
PG 21
24
45,2
40,5
11,5
82,0
PG 29
STRAIGHT PLUG KPT6ME / KPTC6ME
Description: Straight plug with
adapter for ME gland nut.
Gland nut is not included.
Shell size
ØG
max.
ØB
max.
C
min.
LME
max.
Metric Thread
10
23,6
19,0
10,5
58,5
M 12 x 1,5
12
26,5
22,5
10,5
58,5
M 16 x 1,5
14
30,1
25,0
10,5
58,5
M 20 x 1,5
16
33,2
28,0
10,5
73,0
M20 x 1,5
18
35,4
32,5
11,5
73,0
M 25 x 1,5
20
39,0
34,5
11,5
76,0
M 25 x 1,5
22
42,1
38,0
11,5
82,0
M 32 x 1,5
24
45,2
40,5
11,5
82,0
M 32 x 1,5
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
28
ittcannon.com
JAM NUT RECEPTACLES KPT07A / KPTC7A
Description: Jam nut receptacle
without endbell.
Shell size
ØA
+0,03 – 0,13
F
±0,15
H
±0,15
K
±0,25
M
±0,15
T Panel Thickness
RTHD
Thread Type 2A
S
max.
min.
max.
ØN
±0.4
Z
max.
8
12,00
13,3
19,0
3,2
17,7
9/16-24UNEF
24,3
1,6
3,5
26,9
7,9
10
15,00
16,5
22,2
3,2
17,7
11/16-24UNEF
27,4
1,6
3,5
30,1
7,9
12
19,05
20,6
27,0
3,2
17,7
7/8-20UNEF
32,2
1,6
3,5
34,9
7,9
14
22,23
23,8
30,2
3,2
17,7
1-20UNEF
35,4
1,6
3,5
38,1
7,9
16
25,40
26,9
33,3
3,2
17,7
1-1/8-18UNEF
38,6
1,6
3,5
41,2
7,9
18
28,58
30,1
36,5
3,2
17,7
1-1/4-18UNEF
41,7
1,6
3,5
44,4
7,9
20
31,75
33,3
39,7
4,0
22,5
1-3/8-18UNEF
46,5
1,6
6,5
49,2
4,7
22
34,93
36,5
42,9
4,0
22,5
1-1/2-18UNEF
49,7
1,6
6,5
52,3
4,7
24
38,10
39,6
46,0
4,0
23,3
1-5/8-18UNEF
52,8
1,6
6,5
55,5
3,8
JAM NUT RECEPTACLES KPT07E / KPSE07E (VG95328D) / KPTC7E
Description: Jam nut receptacle
with pressure nut and grommet
seal.
Shell size
ØA
+0,03 – 0,13
F
±0,15
H
±0,15
K
±0,25
M
±0,15
RTHD
Thread Type 2A
S
max.
T Panel Thickness
min.
max.
ØN
±0.4
Ø BE
max.
LE
max.
8
12,00
13,3
19,0
3,2
17,7
9/16-24UNEF
24,3
1,6
3,5
26,9
18,2
33,5
10
15,00
16,5
22,2
3,2
17,7
11/16-24UNEF
27,4
1,6
3,5
30,1
21,5
33,5
12
19,05
20,6
27,0
3,2
17,7
7/8-20UNEF
32,2
1,6
3,5
34,9
24,6
33,5
14
22,23
23,8
30,2
3,2
17,7
1-20UNEF
35,4
1,6
3,5
38,1
27,8
33,5
16
25,40
26,9
33,3
3,2
17,7
1-1/8-18UNEF
38,6
1,6
3,5
41,2
31,0
33,5
18
28,58
30,1
36,5
3,2
17,7
1-1/4-18UNEF
41,7
1,6
3,5
44,4
34,1
33,5
20
31,75
33,3
39,7
4,0
22,5
1-3/8-18UNEF
46,5
1,6
6,5
49,2
38,1
39,0
22
34,93
36,5
42,9
4,0
22,5
1-1/2-18UNEF
49,7
1,6
6,5
52,3
41,3
39,0
24
38,10
39,6
46,0
4,0
23,3
1-5/8-18UNEF
52,8
1,6
6,5
55,5
44,5
39,0
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
ittcannon.com
29
JAM NUT RECEPTACLES KPT07F / KPSE07F (VG95328E) / KPTC7F
Description: Jam nut receptacle
with endbell, cable clamp and
grommet seal.
Shell size
ØA
+0,03 – 0,13
F
±0,15
H
±0,15
K
±0,25
M
±0,15
RTHD
Thread Type 2A
S
max.
T Panel Thickness
min.
max.
ØN
±0.4
LF
max.
Ø GF
max.
HF
max.
8
12,00
13,3
19,0
3,2
17,7
9/16-24UNEF
24,3
1,6
3,5
26,9
44,9
2,9
19,3
10
15,00
16,5
22,2
3,2
17,7
11/16-24UNEF
27,4
1,6
3,5
30,1
44,9
4,5
20,8
12
19,05
20,6
27,0
3,2
17,7
7/8-20UNEF
32,2
1,6
3,5
34,9
44,9
7,7
24,4
14
22,23
23,8
30,2
3,2
17,7
1-20UNEF
35,4
1,6
3,5
38,1
44,9
9,3
27,2
16
25,40
26,9
33,3
3,2
17,7
1-1/8-18UNEF
38,6
1,6
3,5
41,2
48,4
12,4
28,7
18
28,58
30,1
36,5
3,2
17,7
1-1/4-18UNEF
41,7
1,6
3,5
44,4
48,4
15,6
35,3
20
31,75
33,3
39,7
4,0
22,5
1-3/8-18UNEF
46,5
1,6
6,5
49,2
50,3
15,6
35,3
22
34,93
36,5
42,9
4,0
22,5
1-1/2-18UNEF
49,7
1,6
6,5
52,3
50,3
18,8
39,9
24
38,10
39,6
46,0
4,0
23,3
1-5/8-18UNEF
52,8
1,6
6,5
55,5
50,3
20,1
43,2
ØN
±0.4
L1
max.
L2
±0,15
Ø D2
max.
JAM NUT RECEPTACLES KPT7E...DN / KPSE7E...DN (VG95328S) / KPTC7E…DN
Description: Jam nut receptacle
with endbell for heat shrink
boot and grommet seal.
Shell size
ØA
+0,03 – 0,13
F
±0,15
H
±0,15
K
±0,25
M
±0,15
RTHD
Thread Type 2A
S
max.
T Panel Thickness
min.
max.
8
12,00
13,3
19,0
3,2
17,7
9/16-24UNEF
24,3
1,6
3,5
26,9
43,0
12,2
15,6
10
15,00
16,5
22,2
3,2
17,7
11/16-24UNEF
27,4
1,6
3,5
30,1
43,0
12,2
18,4
12
19,05
20,6
27,0
3,2
17,7
7/8-20UNEF
32,2
1,6
3,5
34,9
43,0
12,2
23,7
14
22,23
23,8
30,2
3,2
17,7
1-20UNEF
35,4
1,6
3,5
38,1
43,0
12,2
24,5
16
25,40
26,9
33,3
3,2
17,7
1-1/8-18UNEF
38,6
1,6
3,5
41,2
45,5
14,5
29,8
18
28,58
30,1
36,5
3,2
17,7
1-1/4-18UNEF
41,7
1,6
3,5
44,4
45,5
14,5
32,0
20
31,75
33,3
39,7
4,0
22,5
1-3/8-18UNEF
46,5
1,6
6,5
49,2
52,6
15,8
36,1
22
34,93
36,5
42,9
4,0
22,5
1-1/2-18UNEF
49,7
1,6
6,5
52,3
52,6
15,8
38,5
24
38,10
39,6
46,0
4,0
23,3
1-5/8-18UNEF
52,8
1,6
6,5
55,5
51,6
14,9
41,6
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
30
ittcannon.com
JAM NUT RECEPTACLES KPT7E...DZ / KPSE7E...DZ / KPTC7E...DZ
Description: Jam nut receptacle
with endbell for heat shrink boot
and grommet seal, shielded.
T Panel Thickness
Shell
size
ØA
min.
ØB
+0,5
ØC
max.
ØD
max.
E
±1,0
F
±0,15
ØG
-0.1
H
±0,15
K
±0,25
M
±0,15
RTHD
THREAD TYPE 2A
S
max.
min.
max.
ØN
±0.4
L
max.
8
6,6
16
18,2
13,3
15
13,3
12
19
3,2
17,7
9/16-24UNEF
24,3
1,6
3,5
26,9
47
10
9,2
18
21,4
16,1
15
16,5
15
22,2
3,2
17,7
11/16-24UNEF
27,4
1,6
3,5
30,1
47
12
12,2
22
24,6
20
17
20,6
19,05
27
3,2
17,7
7/8-20UNEF
32,2
1,6
14
15,2
25
27,8
22,2
18
23,8
22,23
30,2
3,2
17,7
1-20UNEF
35,4
1,6
3,5
34,9
49
3,5
38,1
50
16
18,3
28
30,9
26,2
18
26,9
25,4
33,3
3,2
17,7
1-1/8-18UNEF
38,6
1,6
3,5
41,2
50
18
20
32
34,1
28,5
18
30,1
28,58
36,5
3,2
17,7
1-1/4-18UNEF
41,7
1,6
3,5
44,4
50
20
23
34
38,1
32,5
18
33,3
31,75
39,7
4
22,5
1-3/8-18UNEF
46,5
1,6
6,5
49,2
55
22
26
38
41,3
34,8
18
36,5
34,93
42,9
4
22,5
1-1/2-18UNEF
49,7
1,6
6,5
52,3
55
24
28,8
41
44,4
37,9
18
39,5
38,1
46
4
23,3
1-5/8-18UNEF
52,8
1,6
6,5
55,5
55
RIGHT ANGLE PLUG KPT08A / KPSE08A / KPTC8A
Description: Plug with 90° endbell
without cable clamp, no grommet seal.
Shell size
ØG
max.
LA
max.
DA
max.
VTHD
Thread Type 2A
8
19,8
36,1
20,9
1/2-28UNEF
10
23,6
38,3
21,7
5/8-24UNEF
12
26,5
40,9
23,3
3/4-20UNEF
14
30,1
41,6
24,9
7/8-20UNEF
16
33,2
42,5
26,5
1-20UNEF
18
35,4
44,7
28,1
1-3/16-18UNEF
20
39,0
48,3
29,6
1-3/16-18UNEF
22
42,1
52,1
31,7
1-7/16-18UNEF
24
45,2
52,1
33,6
1-7/16-18UNEF
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
ittcannon.com
31
RIGHT ANGLE PLUG KPT08E / KPSE08E / KPTC8E
Description: Plug with 90° endbell without
cable clamp, with grommet seal.
Shell size
ØG
max.
LE
max.
DE
max.
VTHD
Thread Type 2A
8
19,8
36,1
20,9
1/2-28UNEF
10
23,6
38,3
21,7
5/8-24UNEF
12
26,5
40,9
23,3
3/4-20UNEF
14
30,1
41,6
24,9
7/8-20UNEF
16
33,2
42,5
26,5
1-20UNEF
18
35,4
44,7
28,1
1-3/16-18UNEF
20
39,0
48,3
29,6
1-3/16-18UNEF
22
42,1
52,1
31,7
1-7/16-18UNEF
24
45,2
52,1
33,6
1-7/16-18UNEF
RIGHT ANGLE PLUG KPT08F / KPSE08F / KPTC8F
Description: Plug with 90° endbell with
cable clamp and grommet seal.
Shell size
ØG
max.
L
max.
DF
max.
LF
max.
8
19,8
47,0
31,4
36,1
10
23,6
49,5
32,2
38,3
12
26,5
53,5
35,4
40,9
14
30,1
55,5
38,6
41,6
16
33,2
57,0
40,2
42,5
18
35,4
62,5
41,8
44,7
20
39,0
67,0
43,4
48,3
22
42,1
71,5
47,9
52,1
24
45,2
74,0
49,9
52,1
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
32
ittcannon.com
BOX MOUNTING RECEPTACLE KPT2 / KPTC2 … EX OR EW
Description: Box mounting receptacle with
PCB solder pins:
EX – PCB solder pin 0,76 x 7mm
EW – PCB solder pin 0,6 x 7mm
Shell size
ØA
+0,03 – 0,13
K
±0,1
L
max.
M
±0,15
ØN
max.
R
±0,15
S
max.
ØT
±0,15
8
12,00
1,9
21,1
11,60
11,1
15,1
21,0
3,05
10
15,00
1,9
21,1
11,60
14,3
18,3
24,2
3,05
12
19,05
1,9
21,1
11,60
17,5
20,6
26,6
3,05
14
22,23
1,9
21,1
11,60
20,6
23,0
29,0
3,05
16
25,40
1,9
21,1
11,60
23,8
24,6
31,3
3,05
18
28,58
1,9
21,1
11,60
27,0
27,0
33,7
3,05
20
31,75
2,2
22,7
14,25
30,2
29,4
36,9
3,05
22
34,93
2,2
22,7
14,25
33,4
31,7
40,1
3,05
24
38,10
2,2
22,7
15,10
36,5
34,9
43,3
3,75
JAM NUT RECEPTACLES KPT7 / KPTC7 …EX OR EW
Description: Jam nut receptacle with
PCB solder pins:
EX – PCB solder pin 0,76 x 7mm
EW – PCB solder pin 0,6 x 7mm
Shell size
ØA
+0,03 – 0,13
F
±0,15
H
±0,15
K
±0,25
M
±0,15
RTHD
Thread Type 2A
S
max.
T (Panel Thickness)
min.
max.
ØN
±0.4
8
12,0
13,3
19,0
3,2
17,7
9/16-24UNEF
24,3
1,6
3,5
26,9
10
15,0
16,5
22,2
3,2
17,7
11/16-24UNEF
27,4
1,6
3,5
30,1
12
19,1
20,6
27,0
3,2
17,7
7/8-20UNEF
32,2
1,6
3,5
34,9
14
22,2
23,8
30,2
3,2
17,7
1-20UNEF
35,4
1,6
3,5
38,1
16
25,4
26,9
33,3
3,2
17,7
1-1/8-18UNEF
38,6
1,6
3,5
41,2
18
28,6
30,1
36,5
3,2
17,7
1-1/4-18UNEF
41,7
1,6
3,5
44,4
20
31,8
33,3
39,7
4,0
22,5
1-3/8-18UNEF
46,5
1,6
6,5
49,2
22
34,9
36,5
42,9
4,0
22,5
1-1/2-18UNEF
49,7
1,6
6,5
52,3
24
38,1
39,6
46,0
4,0
23,3
1-5/8-18UNEF
52,8
1,6
6,5
55,5
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
ittcannon.com
33
PROTECTIVE CAPS KPT / KPSE / KPTC
HOW TO ORDER
KPT80- 10
D- A34
KPTC80-
Series
Series
KPT80 – for plug
KPTC80 – for plug
KPT81 – for receptacle
KPTC81 – for receptacle
Shell size
Shell size
8 – 24
8 – 24
Termination
Termination
D – Nylon cord 400 mm
C – Nylon cord and endlink
Clip and end link attached (not assembled)
N - Nylon cord with ring (KPTC81 only)
Crimp tool for end link: M317 (selector position 6)
C – sash chain and terminal link
Modification
CB – Nylon cord and terminal link
C – Nickel plated (RoHS compliant)
N – chain with ring (KPT81 only)
D – Cadmium plated (VG approved)
NB – Nylon cord with ring (KPT81 only)
R – Zinc cobalt, black (RoHS compliant)
10
C- C
F – Zinc cobalt, green (RoHS compliant)
Modification
H – Zinc nickel plating (RoHS compliant)
G - Tin Zinc, matt grey (VG approved,
RoHS compliant)
A34 – Nickel plated (RoHS compliant)
A232 – Zinc cobalt, black (RoHS compliant)
A240 – Zinc nickel plating (RoHS compliant)
A241 - Tin Zinc, matt grey (VG approved,
RoHS compliant)
(without code) – Olive drab chromate over cadmium
(VG approved)
VG95328 Z2
C
10
J
VG Specification
Style
Z1 – for receptacle
Z2 – for plug
Z3 – for jam nut receptacle
Termination
A – chain and terminal link
B - for Z1 and Z2:
Nylon cord and terminal link
C – for Z1 and Z2:
Nylon cord 400 mm and end link
Clip and end link attached (not mounted)
Crimp tool for end link: M317 (selector position 6)
C – for Z3: Nylon cord with ring
Shell size
8 – 24
Plating
Without identification = Cadmium, VG approved
Identification ‘J’ = RoHS, Matt Grey SnZn plating, VG approved
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
34
ittcannon.com
PROTECTIVE CAPS KPT / KPSE / KPTC
Cap with end link (not assembled)
For receptacle
KPT81 termination D
VG95328 Z1 termination C
For plug
KPT80 termination D
VG95328 Z2 termination C
Cap with terminal link
Cap with ring
For receptacle
KPT81 termination C
(with chain) and CB (with nylon cord)
VG95328 Z1 termination A (with chain)
For plug
KPT80 termination C
(with chain) and CB (with nylon cord)
VG95328 Z2 termination A (with chain)
For receptacle
KPT81 termination N
(with chain) and NB (with nylon chord)
VG95328 Z3 termination C (with nylon cord)
Shell size
ØA
max.
L1
max.
ØB
max.
L2
max.
L5
+13
-7
H
±10
N
±0,5
8
18,3
19,9
18,7
21,5
77
110
14,7
10
21,5
19,9
21,9
21,5
77
110
17,9
12
25,4
19,9
25,4
21,5
89
110
22,6
14
28,6
19,9
28,6
21,5
89
110
25,8
16
31,8
19,9
31,8
21,5
89
110
29,0
18
35,0
19,9
35,0
21,5
89
110
32,2
20
38,1
21,5
38,1
21,5
102
110
35,3
22
41,3
21,5
41,3
21,5
102
110
38,5
24
44,5
22,3
44,5
22,3
102
110
41,7
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
ittcannon.com
35
DUMMY RECEPTACLES KPT/KPSE/KPTC
HOW TO ORDER
Below the order reference for Dummy Receptacles KPT series (can be mated with KPSE or KPTC connectors)
and separately for VG95328. The table contains the available shell sizes with their respective dimensions.
KPT
15-
8
A
VG95328
Series
Series
Dummy receptacle
Dummy receptacle
Shell size
Style (back side closed)
Flange
Shell size
T07
C 8
A – Standard
Shell size
ØA
+0,03 – 0,13
K
±0,4
M
±0,15
R
±0,15
S
max.
ØT
±0,15
KPT-15-8 A
12,00
1,6
12,1
15,1
21,0
3,05
KPT-15-10 A
15,00
1,6
12,1
18,3
24,2
3,05
KPT-15-12 A
19,05
1,6
12,1
20,6
26,6
3,05
KPT-15- 14 A
22,23
1,6
12,1
23,0
29,0
3,05
KPT-15-16 A
25,40
1,6
12,1
24,6
31,3
3,05
KPT-15-18 A
28,58
1,6
12,1
27,0
33,7
3,05
KPT-15- 20 A
31,75
2,4
14,5
29,4
36,9
3,05
KPT-15- 22 A
34,93
2,4
14,5
31,8
40,1
3,05
KPT-15-24 A
38,10
2,4
15,4
34,9
43,3
3,75
GASKETS
Shell Size
Alu-Flex Conductive
Chloroprene non conductive
Shell Size
Alu-Flex Conductive
Chloroprene non conductive
8
075-8543-000
075-8543-010
18
075-8543-005
075-8543-015
10
075-8543-001
075-8543-011
20
075-8543-006
075-8543-016
12
075-8543-002
075-8543-012
22
075-8543-007
075-8543-017
14
075-8543-003
075-8543-013
24
075-8543-008
075-8543-018
16
075-8543-004
075-8543-014
WIRE HOLE FILLERS
Contact Size
Colour code
Cannon
20
Red
225-1012-000
16
Blue
225-1011-000
12*
Yellow
225-0072-000
Coaxial 14a4*
Yellow
225-0018-000
*KPSE only
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
36
ittcannon.com
CROSS REFERENCE LIST KPT / KPSE / VG95328 / MIL-C-26482
All three product lines have specific characteristics and provide a set of unique variants, however, all lines are fully
intermateable with each other as well as any other connector series designed according to MIL-DTL 26482 Series I
or VG95328 standards.
Solder
ITT Cannon
MIL-DTL-26482-Style
Crimp
VG95328
ITT Cannon
MIL-DTL-26482-Style
VG95328
KPT00E
MS3110E
KPSE00E
MS3120E
VG95328A
KPT00F
MS3110F
KPSE00F
MS3120F
VG95328B
KPT0E-DN
KPSE0E-DN
KPT0E-DZ
KPSE0E-DZ
KPT01A
VG95328R
KPSE01A
KPT01E
MS3111E
KPSE01E
MS3121E
KPT01F
MS3111F
KPSE01F
MS3121F
KPT1E-DN
KPSE1E-DN
KPT1E-DZ
KPSE1E-DZ
KPT02E
MS3112E
KPSE02E
VG95328H
KPT06A
MS3122E
VG95328C
KPSE06A
KPT06E
MS3116E
KPSE06E
MS3126E
KPT06F
MS3116F
KPSE06F
MS3126F
VG95328K
KPT6E-DN
KPSE6E-DN
VG95328J
KPT6E-DZ
KPSE6E-DZ
VG95328M
KPT07A
KPSE07A
KPT07E
MS3114E
KPSE07E
MS3124E
VG95328D
KPT07F
MS3114F
KPSE07F
MS3124F
VG95328E
KPT7E-DN
KPSE7E-DN
KPT7E-DZ
KPSE7E-DZ
KPT08E
KPSE08E
KPT08F
KPSE08F
KPTB
MS3119
VG95328P
CROSS REFERENCE LIST PROTECTIVE CAPS KPT / VG95328 / MIL-C-26482
This table shows which commercial protective caps are available per VG95328. Additionally, it can be
used when cross-referencing a MS protective cap for a KPT (ITT Cannon) substitute.
Part No.
ITT Cannon
KPT80..C
Part No.
MIL-DTL-26482-Style
Part No.
VG95328
MS3180..C
VG95328Z2A..
KPT80..CB
VG95328Z2B..
KPT80..D
KPT81..C
VG95328Z2C..
MS3181..C
VG95328Z1A..
KPT81..CB
VG95328Z1B..
KPT81..D
VG95328Z1C..
KPT81..N
KPT81..NB
MS3181..N
VG95328Z3C..
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
ittcannon.com
37
VG95328S
TOOLS AND ACCESSORIES KPT / KPSE / KPTC
Hand crimping tool M22520/1-01 and Locator: Order No.: 995-0001-585
This universal tool features just one crimp locator
with different adjustments for crimping contacts.
The tool provides an 8-indent crimp.
Note: The locator needs to be purchased separately:
Descripton Locator
Name
Order-No.
Contact Size
12
M22520/1-02
Locator
995-0001-736
16
20
M22520/1-01
Hand Crimp Tool
995-0001-585
Pneumatic crimping tool WA27F-CE:
Pneumatic operated crimp tool for higher
volume production. A pedal for foot
operation can also be provided.
The tool provides an 8-indent crimp
equivalent to hand crimping tool.
Crimp tool and Bench mount
Foot pedal
Gauge
Description
Name
Order No.
Pneumatic crimp tool (AWG12-20)
WA27F-CE
121586-5067
Bench mount
BM-2A
121586-5068
Foot pedal
WA10A
121586-5069
Gauge
M22520-3-1
995-0001-684
For insertion and extraction of the contacts, please contact the factory for assembly instructions CAS25098
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
38
ittcannon.com
Insertion Tools
To insert crimped contacts into the insulator insertion tools are required.
KPSE
Insertion Tool
Description
Name
Order No.
insertion tool for contact size # 20
MS24256-A20
995-0001-950
insertion tool for contact size # 16
MS24256-A16
995-0001-951
insertion tool for contact size # 12
MS24256-A12
995-0001-913
KPTC
Insertion Tool
Description
Name
Order No.
insertion tool for contact size # 20
CITG-20A
121086-3104
insertion tool for contact size # 16
CIT-16
121086-3008
insertion pliers for contact size # 16
CIT-F80-16
121086-0097
insertion TIP for insertion tool # 20
CITG-20A-TIP
121086-3105
insertion TIP for insertion tool # 16
CIT-16-TIP
317-1153-000
CIT-F80-16
Extraction Tools
In case a contact has to be exchanged the following extraction tools are to be used:
KPSE
Extraction tool
Description
Name
Order No.
Replacement-TIP
extraction tool for contact size # 20
MS24256-R20
995-0001-965
317-7130-000
extraction tool for contact size # 16
MS24256-R16
995-0001-964
317-7129-000
extraction tool for contact size # 12
MS24256-R12
995-0001-966
317-7131-000
extraction tool for coax contacts (KPT14A4)
CET-C6B
070064-0000
121586-0046
Description
Name
Order No.
Replacement-TIP
extraction tool for contact size # 20
CET-KPTC-20
121086-3212
317-8668-000
extraction tool for contact size # 16
CET-KPTC-16
121086-3277
317-8649-025
Extraction tool for coax contacts
KPTC
Extraction tool
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
ittcannon.com
39
Pipe Wrench
Soft Jaw Adjustable Pliers for tightening the endbell housing.
Order No.: 550014-1644
Dimensions for Single Conductor and Wire Stripping
In order to assure proper function according to connector specification, especially concerning water tightness, the
diameter of the wire insulation must correlate with the following data:
KPTC
KPSE
Contact Size
Insulation dimensions
Waterproof / Ø mm
Conductor dimensions
AWG
mm²
min.
max.
20
24 - 18
0,2 – 0,75
1.3
2.1
16
20 - 14
0,5 – 2,0
1.8
2.7
12
14 - 12
-
2.5
3.4
Contact Size
Conductor dimensions
Insulation dimensions
Waterproof / Ø mm
AWG
mm²
min.
max.
20
24 - 18
0,2 – 0,75
1.4
2.15
16
20 - 14
0,5 – 2,0
1.6
2.7
Contacts
KPTC
Termination
Contact
size
AWG
mm²
20
28 - 24
0,08 – 0,20
20
24 – 18
0,20 – 0,75
20
-
0,5 – 1,0
16
20– 14
0,5 – 2,0
Contact type
Pin
For shell size 8 and contact layout 12 – 14 only
Contact order reference
430-8588-029
Contact order reference
Gold plating
Silver plating
Socket
031-8704-508
031-8704-509
031-8704-506
Pin
430-8560-404
430-8560-411
430-8560-410
Socket
430-8588-031
-
-
Pin
430-8588-030
-
-
Socket
031-8704-502
-
-
Pin
430-8560-406
-
-
KPSE / VG95328
Contact size
Termination
AWG
mm²
20
24 - 18
0,2 - 0,75
16
20 - 14
0,5 - 2,0
12
14 - 12
2,0
Contact type
Contact order reference
KPSE version
VG95328 version
Socket with insulation support
031-8704-203
031-8704-203
Pin with insulation support
430-8560-006
430-8560-006
Socket
031-8704-000
031-8704-000
Pin
430-8560-004
430-8560-004
Socket
031-8704-012
-
Pin
430-8560-016
-
Grounding Pin
430-8560-020
-
KPT14A4
Contact size
Coaxial
Termination
Cable type
RG187/U, RG188/U
Contact type
Contact order
reference
Receptacle
DM 53742-5001
Plug
DM 53740-5001
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
40
ittcannon.com
PRODUCT SAFETY INFORMATION
1. MATERIAL CONTENT AND PHYSICAL FORM
4. DISPOSAL
Electrical connectors do not usually contain hazardous materials.
They contain conducting and non-conducting materials and can be
divided into two groups.
Incineration of certain materials may release noxious or even
toxic fumes.
a) Printed circuit types and low cost audio types which employ all
plastic insulators and casings.
5. APPLICATION
Connectors with exposed contacts should not be selected for use
on the current supply side of an electrical circuit, because an
electric shock could result from touching exposed contacts on an
unmated connector. Voltages in excess of 30 V ac or 42.5 V DC are
potentially hazardous and care should be taken to ensure that such
voltages cannot be transmitted in any way to exposed metal parts
of the connector body. The connector and wiring should be
checked, before making live, to have no damage to metal parts or
insulators, no solder blobs, loose strands, conducting lubricants,
swarf, or any other undesired conducting particles. Circuit
resistance and continuity check should be made to make certain
that there are no high resistance joints or spurious conducting
paths. Always use the correct application tools as specified in the
Data Sheet/Catalog. Do not permit untrained personnel to wire,
assemble or tamper with connectors. For operation voltage please
see appropriate national regulations.
b) Rugged, Fire Barrier and High Reliability types with metal casings
and either natural rubber, synthetic rubber, plastic or glass
insulating materials. Contact materials vary with type of connector
and also application and are usually manufactured from either:
Copper, copper alloys, nickel, alumel, chromel or steel. In special
applications, other alloys may be specified.
2. FIRE CHARACTERISTICS AND ELECTRIC SHOCK HAZARD
There is no fire hazard when the connector is correctly wired and
used within the specified parameters.
Incorrect wiring or assembly of the connector or careless use of
metal tools or conductive fluids, or transit damage to any of the
component parts may cause electric shock or burns. Live circuits
must not be broken by separating mated connectors as this may
cause arcing, ionization and burning. Heat dissipation is greater at
maximum resistance in a circuit. Hot spots may occur when
resistance is raised locally by damage, e.g. cracked or deformed
contacts, broken strands of wire. Local overheating may also result
from the use of the incorrect application tools or from poor quality
soldering or slack screw terminals.
IMPORTANT GENERAL INFORMATION
(i) Air and creepage paths/Operating voltage. The admissible
operating voltages depend on the individual applications and the
valid national and other applicable safety regulations. For this
reason the air and creepage path data are only reference values.
Observe reduction of air and creepage paths due to PC board and/
or harnessing.
(ii) Temperature
Overheating may occur if the ratings in the product Data Sheet/
Catalog are exceeded and can cause breakdown of insulation and
hence electric shock. If heating is allowed to continue it intensifies
by further increasing the local resistance through loss of temper of
spring contacts, formation of oxide film on contacts and wires and
leakage currents through carbonization of insulation and tracking
paths. Fire can then result in the presence of combustible materials
and this may release noxious fumes. Overheating may not be
visually apparent. Burns may result from touching overheated
components.
All information given are temperature limits. The operation
temperature depends on the individual application.
(iii) Other important information
Cannon continuously endeavors to improve their products.
Therefore, Cannon products may deviate from the description,
technical data and shape as shown in this catalog and data sheets.
ITT Cannon manufactures the highest quality products available in
the marketplace; however these products are intended to be used
in accordance with the specifications in this publication. Any use or
application that deviates from the stated operating specifications is
not recommended and may be unsafe. No information and data
contained in this publication shall be construed to create any
liability on the part of Cannon. Any new issue of this publication
shall automatically invalidate and supersede any and all
previous issues.
3. HANDLING
Care must be taken to avoid damage to any component parts of
electrical connectors during installation and use. Although there
are normally no sharp edges, care must be taken when handling
certain components to avoid injury to fingers.
Electrical connectors may be damaged in transit to the customers,
and damage may result in creation of hazards. Products should
therefore be examined prior to installation/use and rejected if
found to be damaged.
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
ittcannon.com
41
Amazing things
happen when great
things connect
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured KPT / KPSE / KPTC products
42
ittcannon.com
Notes
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
ittcannon.com
43
Connect with your ITT Cannon representative today
or visit us at ittcannon.com
Connect with the experts
ITT’s Cannon brand is a world leader in the design and manufacture of
highly engineered connector solutions for multiple end markets.
Why ITT
ITT is a focused multi-industrial company that designs and manufactures highly engineered critical components and customized technology
solutions. ITT’s Cannon brand is a leading global manufacturer of connector products serving international customers in aerospace, defense, medical,
industrial and transportation end markets. ITT’s Connector business, which also includes the Veam and BIW Connector Systems brand, manufactures
and supplies a variety of connectors and interconnects that make it possible to transfer data, signal and power in an increasingly connected world.
Connect with your ITT Cannon representative today or visit us at ittcannon.com
Follow us
CHINA - Shenzhen City
+86.755.2726.7888
GERMANY - Weinstadt
+49.7151.699.0
ITALY - Lainate
+39.02938721
KOREA
+82.2.702.7111
SHANGHAI
+ 86.21.2231.2222
UK - Basingstoke
+44.1256.347400
FRANCE
+33.1.60.04.93.93
HONG KONG
+852.2732.2720
JAPAN - Kanagawa
+81.462.57.2010
MEXICO - Nogales
+52.631.311.0050
SINGAPORE
+65 66974205
USA - Irvine, CA
+1.800.854.3028
The “ITT Engineered Blocks“ symbol, “ITT”, “Cannon” and “Veam“are registered trademarks of ITT Inc.
Specification and other data are based on information available at the time of printing, and are subject to change without notice.
© 2024 ITT Inc.
ITT Cannon KPx CAT 07/2024
