CA Threaded Catalog
Proven Quality, Reliability & Expertise
ITT Cannon is a leading global manufacturer of connector products
serving international customers in the aerospace and defense,
medical, energy, transportation and industrial end markets.
Whether delivering critical specs to aircraft pilots, streaming data
through communications satellites or giving expectant parents a
first look at their unborn children, Cannon connects the world’s most
important information to the people who need it.
About ITT
ITT is a diversified leading manufacturer of highly engineered critical components and customized technology
solutions for the energy, transportation and industrial markets. Building on its heritage of innovation, ITT partners
with its customers to deliver enduring solutions to the key industries that underpin our modern way of life.
Founded in 1920, ITT is headquartered in Stamford, Connecticut, with employees in more than 35 countries and
sales in a total of approximately 125 countries. For more information, visit itt.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
2
ittcannon.com
lndustrial / lnstrumentation
Rail
Defense Vehicles
Oil & Gas
Medical
Commercial & Military Aerospace
Our connector portfolio remains
the most extensive in the industry.
Heavy Equipment
Offering a reliable and cost effective range of
interconnect solutions.
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ittcannon.com
3
Introduction
ITT Cannon’s circular metal connector series CA Threaded is one of
the market standards for harsh environment applications in commercial
as well as military applications. Derived from the military standard
MIL-C-5015 the product portfolio expanded to meet the needs of
industrial and heavy vehicle applications around the globe. As a result
the commercial offering exceeds the military portfolio by more than 30%.
Features and benefits
CA Threaded offers a range of features and benefits to customers in all kind of industrial and heavy vehicle markets:
• Threaded coupling mechanism offering extraordinary vibration resistance
• A wide range of contacts for both solder and crimp applications allowing to connect the full wire range up to 50mm²
cross section
• An extensive range of backshells offering connections of all typical cable solutions with individual wires or jacket cables in
shielded or unshielded versions
• Materials that allow to meet the stringent requirements of industrial and especially heavy vehicle markets as
– temperatures ranging from –55°C up to +200°C
– media resistance* as brake liquids, gasoline, lubricants and others
– RoHS compliant product versions including Military VG approved A241 Tin Zinc Matt Grey and Industrial A240 Zinc
Nickel Blue Generation plated products
Contact us for detail or your request for a customized solution.
*short time wetting
This document solely applies to European manufactured CA Threaded products.
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
4
ittcannon.com
How to use
This catalog is split in several sections to provide…
• A brief introduction to ITT Cannon and CA Threaded
• A general overview of the CA Threaded product lines
• Detailed product information including contact arrangements,
performance and part number data
• Detailed supporting information including accessories and tooling
The fastest way to find your product of choice is to follow these steps
1
Select your product using the “ordering reference” option
3
Add accessories and tooling options on the related
pages. A connector assembly instruction is available upon
request or visit www.ittcannon.com
2
Use the detail pages to better understand the available
options like connector styles, contact arrangements and
contacts options
4
Use the contact information on the back cover to contact
us for further questions or to get advise on where you can
purchase our products
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ittcannon.com
5
Table of contents
How to use this catalogue....................................... 5
Product overview.................................................... 7
Ordering reference.................................................. 8
Endbell Modification -F42....................................... 9
Contact arrangements......................................10-22
Mounting dimensions........................................... 23
Separating and coupling dimensions..................... 24
Wall mounting receptacles...............................25-27
Cable connecting plugs....................................28-30
Box mounting receptacles................................31-32
Straight and right angle plugs..........................33-37
Accessories......................................................38-42
Contacts..........................................................43-44
CA Layout Overview.........................................45-46
Tooling............................................................47-48
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
6
ittcannon.com
Product overview
Test voltage
ELECTRICAL DATA
Contact Rating at 20°C (68°F), ambient temperature
Service rating
Test voltage Vrms
Contact size (AWG/metric)
Instruments
1050
A
1600
B
4500
D
2500
E
3000
Rated Current (A max.) ¹
20/10
8
16S /15S
22
16 /15
22
12
41
8/60/100
74
4 /160
135
0 /500
245
MECHANICAL FEATURES
Ambient temperature
Neoprene: –55/125°C (– 67/257°F), FKM: –30/200°C (– 22/392°F)*
¹ This applies only to the max. rated current for one contact. If several contacts
in one contact arrangement are loaded with higher current the temperature
may not exceed 125°C
ENVIRONMENTAL SEALING
Up to IP 65 (in mated condition) Acc. to DIN EN 60068-1
Rated Current vs. Ambient Temperature
Mating Cycles min. 500
Min. Separating Force per Contact
Contact size
metric
Separating force
AWG
N min
10
20
0,3
15S /15
16S /16
1,0
1,5
25
12
60/100
8
3,0
160
4
4,0
500
0
8,5
Contact Retention Apply test force in mating direction
Contact size
metric
Contacts Resistance (Millivolt test)
Contact size
Contact resistance
(AWG /metric)
mΩ max.
20 /10
12,0
16S /15S
6,0
16 /15
6,0
12/25
3,0
8 /100
1,0
4 /160
0,3
0 /500
0,2
N
10
20
30
15S /15
16S /16
35
25
12
55
60/100
8
80
160
4
90
500
0
95
Coupling Torque
The admissible coupling torque has to be tested under harnessed condition
Admissible torque
Shell size
Insulation Resistance
3,0
0,15
12S
2,8
0,23
14S
5,9
0,35
16S/16
7,0
0,46
18
8,0
0,58
20
9,0
0,70
22
10,6
0,80
24
12,9
0,80
28
16,7
0,92
32
18,1
1,02
36
23,9
1,05
Air and Creepage Path (min.)
Voltage class
Instr.
A
D
E
Air path, mm
0,7
1,1
2,8
4,8
Creepage path, mm
0,7
1,1
2,8
4,8
Operation Voltage
Operating voltage for CA Threaded connectors is limited to 50VAC / 75VDC according to
the safety regulations defined in the European Low Voltage Directive (LVD) 2014/35/EU.
For other uses or regions please see appropriate regional regulations.
Closing and opening (Nmmax) Opening (Nmmin)
10SL
Standard insulator material >1000 MΩ
FKM insulator material (upon request) >5000 MΩ
Materials
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ittcannon.com
Test force
AWG
Shell
Aluminum alloy
Contacts
Copper alloy, silver plated or gold plated
Insulator / Grommet
Polychloroprene (Standard)
FKM (High temperature)
* consult factory
7
Ordering reference
CA 3106 E 18-1 P W F183
Part number explanation
Series CA – Cannon Designation
Shell type
3100 – Wall mounting receptacle
see page 25-27
3101 – Cable connecting plug
see page 28-30
3102 – Box mounting receptacle
see page 31-32
20 – Box mounting receptacle, rear mounting
see page 31-32
3106 – Plug, straight
see page 33-35
3108 – Plug, 90°
see page 36
Class
E – Backshell with cable clamp¹
F – Backshell for flex tube
PG – Adapter for PG-termination
ME – Adapter for Metric-termination
L – PCB solder termination
R – Short backshell, no strain relief
Shell size
10SL, 12S, 14S, 16, 16S, 18, 20, 22, 24, 28, 32, 36
Contact arrangement
see page 10-22
Contact type
P – pin
S – socket
Insulator position
see page 10-20
Modification
13 – shielded version, solder pot contacts, no grounding spring
14 – shielded version, metric crimp contacts, no grounding spring
15 – shielded version, AWG crimp contacts, no grounding spring
48 – F backshell with O-ring seal without ferrule and grommet
83 – Grounding spring on the barrel
A176 – Contacts gold plated
see page 43-44
A232 – Zinc cobalt black plating, RoHS compliant
A240 – Zinc nickel plating, blue iridescent, RoHS compliant
A241 - Tin Zinc plating, matt grey, RoHS compliant
BM29 – Threaded flange holes, shell styles 02, 20 and 00
DN – Adapter for heat shrink boots
F0 – Without contacts (to be ordered separately)
F42 – Without backshell, grommet and ferrule
F80 – AWG Crimp contacts
F137 – O-ring under the coupling nut ²
F183 – Metric Crimp contacts
¹ except shell style 02 / 20 ² a number of plugs are already featured with this O-ring
This document solely applies to European
manufactured CA Threaded products.
Default for any CA Threaded connector is solder cup contacts. Unless one of the
contact modification codes listed above is used the connectors will be supplied
with solder cup contacts.
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
8
ittcannon.com
ENDBELL MODIFICATION -F42
Below table shows the different threads that come with the
respective shell sizes when choosing the modification -F42
(no endbell/grommet seal). This modification is only applicable
to styles 0 (wall mounting receptacle), 1 (cable connecting plug),
6 (straight plug) and 8 (90° angled plug).
Shell size
Thread
A +/- 0,1 (mm)
B (mm)
10SL
9/16-24UNEF-2A
3.40
5.05
12S
5/8-24UNEF-2A
3.4
4.7
14S
3/4-20UNEF-2A
3.4
4.7
16
7/8-20UNEF-2A
4.1
7.6
16S
7/8-20UNEF-2A
4.1
4
18
1-20UNEF-2A
3.5
6.9
20
1 1/8-18UNEF-2A
4.6
5.5
22
1 1/4-18UNEF-2A
4.6
5.5
24
1 3/8-18UNEF-2A
4.6
7.2
28
1 5/8-18UNEF-2A
4.6
7.2
32
1 7/8-16UNEF-2A
4.6
7.9
36
2 1/8-16UN-2A
4.6
7.9
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ittcannon.com
9
CONTACT ARRANGEMENTS
View on Mating face
of Pin Insulator
Insulator position
W
X
Y
Z
–
–
–
A
–
–
A
70
16S
D
12SA10
16S
Instr.
No. of
Contacts
Contact arrangement
Contact size
3
10SL-3
16S
2
2
4
3
4
1
5
6
♦
3
2
7
♦
7
3
16S
A
–
–
–
–
–
145
215
290
–
–
–
–
–
–
–
–
–
–
–
–
3
110
8
250
–
–
–
–
–
–
14S-2
16S
Instr.
–
120
240
–
–
–
16S
D
–
–
–
–
–
–
14S-5
16S
Instr.
–
110
–
–
–
–
14S-6
16S
Instr.
–
–
–
–
–
–
16S
A
90
180
270
–
14S-9
16S
Instr.
70
145
215
290
–
–
14SA7
16S
Instr.
–
–
–
–
–
–
A
80
–
–
280
–
–
D
35
110
250
325
–
–
A
70
145
215
290
–
–
A
–
170
265
–
–
–
14S-4
14S-7
–
16S-1
16S-4
16S-5
16S
5
–
14S-1
16S
♦
–
A
12S-4
16S
2
Special polarization
12S-3
16S
1
Position
10SL-4
16S
♦
Service rating
16S-8
16S
♦Attention: For all insert rotations, it is possible for miss-mating to occur. It is the responsibility of the customer to ensure they have selected correctly.
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
10
ittcannon.com
CONTACT ARRANGEMENTS
View on Mating face No. of
of Pin Insulator
Contacts
Special
polarization
280
–
–
250
325
–
–
180
270
–
–
–
35
110
250
325
–
–
A
–
–
–
–
–
–
12
A
35
110
250
325
–
–
18-1
A (B, C,
16
F, G) Instr.
70
145
215*
290
–
–
D
35
110
250
325
–
–
D
35
110
250
325
–
–
D
80
110
250
280
–
–
D
–
–
–
–
–
–
D
–
–
–
–
–
–
A
70
–
–
290
–
–
2
16
1
8
Insulator position
W
X
Y
Z
A
80
110
250
A
35
110
A
90
A
16-9
4
2
12
2
16
16-10
3
12
16-11
2
12
16-12
1
4
16A11
2
♦
Service rating
16-7
3
♦
Position
Contact arrangement
Contact size
10
(all others)
18-3
2
12
18-4
4
16
18-5
3
2
12
1
16
18-6
1
4
18-7
1
8
18-8
8
1
12
7
16
18-9
2
12
Instr.
80
110
250
280
–
–
5
16
7
18-10
4
12
A
–
120
240
–
–
–
5
18-11
A
–
170
265
–
–
–
A
80
–
–
280
–
–
12
6
18-12
16
*Caution: This insulator rotation is not recommended as it can mate with normal rotation connectors.
♦Attention: For all insert rotations, it is possible for miss-mating to occur. It is the responsibility of the customer to ensure they have selected correctly.
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ittcannon.com
11
CONTACT ARRANGEMENTS
View on Mating face No. of
of Pin Insulator
Contacts
Contact arrangement
Contact size
♦
18-13
4
1
8
3
12
Service rating
A
Insulator position
W
X
Y
Z
Position
Special
polarization
80
110
250
280
–
–
18-17
2
12
Instr.
–
–
–
–
12
100
5
16
A
–
120
240
–
–
–
A
90
180
270
–
–
A
–
–
–
–
–
–
D
70
145
215
290
–
–
D
–
–
–
–
–
–
12
D
70
145
215
290
–
–
20-4
D
45
110
250
–
–
250
7
18-19
10
16
18-20
5
16
18-21
3
12
18-22
3
16
20-2
1
0
20-3
3
4
12
20-6
3
(20A37)
D
–
–
–
–
–
–
80
110
250
280
–
–
Instr.
80
110
250
280
–
–
Instr.
–
–
–
–
–
–
A
80
110
250
280
–
–
A
80
–
–
280
–
–
A
80
110
250
280
–
–
A
90
180
270
–
–
–
16
8
20-7
A (C, D, E, F) D
16
(A, B,
H, G)
20-8
6
2
8
4
16
20-11
13
16
20-14
5
3
2
12
8
20-15
7
12
20-16
9
2
12
7
16
20-17
6
5
12
1
16
♦Attention: For all insert rotations, it is possible for miss-mating to occur. It is the responsibility of the customer to ensure they have selected correctly.
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
12
ittcannon.com
CONTACT ARRANGEMENTS
View on Mating face No. of
of Pin Insulator
Contacts
Service
rating
Insulator position
W
X
A
35
110
250
A
90
180
270
♦
♦
A
80
110
8
A
35
20-24
A
Contact arrangement
Contact size
Position
Special
polarization
325
–
–
–
–
–
250
280
–
–
110
250
325
–
–
35
110
250
325
–
–
A
35
110
250
325
–
–
A
80
–
–
280
–
–
A
–
–
–
2
260
–
3
110
17
130
Y
Z
20-18
9
3
12
6
16
20-19
3
8
20-22
6
3
8
3
16
20-23
2
4
2
8
2
16
20-27
14
16
20-29
17
16
20-33
11
16
9
20A9
12
Instr.
–
110
250
–
–
–
–
–
–
–
–
–
–
Instr.
–
80
280
–
–
–
D
35
110
250
325
–
–
D
70
145
215
290
–
–
A
5
110
250
325
–
–
D
35
110
250
325
–
–
E
–
–
–
–
–
–
(all others)
20A24
24
20
No solder pot contacts available for #10/20
20A48
19
16
22-1
2
8
22-2
3
8
22-4
4
2
8
2
12
22-5
6
1
2
12
4
16
22-7
0
♦Attention: For all insert rotations, it is possible for miss-mating to occur. It is the responsibility of the customer to ensure they have selected correctly.
*Reduced contact termination 0,3mm2.
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ittcannon.com
13
CONTACT ARRANGEMENTS
View on Mating face No. of
of Pin Insulator
Contacts
Contact arrangement
Contact size
Service rating
Insulator position
W
X
Y
Z
Position
Special
polarization
22-8
2
3
12
E
35
110
250
325
–
–
22-9
E
70
145
215
290
–
–
16
E
35
110
250
325
–
–
22-12
D
80
110
250
280
–
–
A
80
–
–
280
–
–
–
–
–
–
–
12
22-10
4
5
♦
2
8
3
16
22-14
19
16
22-15
6
5
12
A (A, B, C, E, F)
1
16
E (D)
80
110
250
280
22-16
A
80
110
250
280
9
3
12
16
22-19
14
A
80
110
250
280
–
–
A
35
110
250
325
–
–
A
80
110
250
280
–
–
–
16
22-20
9
3
16
6
22-21
3
2
16
1
0
22-22
4
A
–
110
250
–
–
–
35
–
250
–
–
–
A (A to H)
80
–
250
280
–
–
12
A
80
–
–
280
–
–
24-2
D
80
–
–
280
–
–
8
8
22-23
D (H)
12
A (all
others)
22-27
9
7
7
1
8
8
16
22-28
12
♦Attention: For all insert rotations, it is possible for miss-mating to occur. It is the responsibility of the customer to ensure they have selected correctly.
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
14
ittcannon.com
CONTACT ARRANGEMENTS
View on Mating face
of Pin Insulator
Position
Special
polarization
280
–
–
250
280
–
–
110
250
280
–
–
35
110
250
325
–
–
A
80
–
–
280
–
–
A
35
110
250
325
–
–
A
80
110
250
280
–
–
A
–
–
–
–
–
–
D
80
110
250
280
–
–
D
45
110
250
–
–
16
E
80
–
–
280
–
–
24-28
Instr.
80
110
250
280
–
–
A
–
–
–
–
2
260
–
–
–
–
4
80
–
–
–
–
9
280
–
–
–
–
12
100
No. of
Contacts
Contact arrangement
Contact size
4
24-4
1
0
3
16
Service rating
Insulator position
W
X
Y
Z
D
80
110
250
A
80
110
A
80
A
24-5
16
16
24-7
16
2
12
14
16
24-9
2
4
24-10
7
8
24-11
9
3
8
6
12
24-12
5
2
4
3
12
24-19
12
16
24-20
11
2
12
9
16
24-22
4
8
24-27
7
24
16
24A24
12
12
28
19
13
5
1
24A28
16
Instr.
65
146
235
–
–
–
24A51
16
12
8
A
–
–
–
–
14
30
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ittcannon.com
15
CONTACT ARRANGEMENTS
View on Mating face No. of
of Pin Insulator
Contacts
Contact arrangement
Contact size
Service rating Insulator position
W
X
Y
Z
Position
Special
polarization
28-2
14
12
16
2
12
D
35
110
250
325
–
–
D
35
110
250
325
–
–
D
80
110
250
280
–
–
80
110
250
280
–
–
A
80
110
250
280
–
–
A
90
180
270
–
–
–
A
80
110
250
280
–
–
28-5
5
2
4
2
16
1
12
28-9
12
6
16
6
12
28-10
7
2
4
A (= A, B, C,
2
8
D, E, F)
3
12
D (= G)
28-11
22
4
12
18
16
26
28-12
16
28-15
35
16
20
28-16
A (A-L)
16
D (M, N, P)
80
110
250
280
–
–
A
80
110
250
280
–
–
A
80
110
250
280
–
–
D
70
145
215
290
–
–
28-20
14
10
12
4
16
28-21
37
16
28-22
6
3
4
3
16
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
16
ittcannon.com
CONTACT ARRANGEMENTS
View on Mating face No. of Contacts Contact
of Pin Insulator
arrangement
Contact size
Service rating
Insulator position
W
X
Y
Z
Position
Special
polarization
D
80
135
195
–
–
–
28-51
12
12
28A16
9
4
4
A (e)
–
–
–
–
2
260
5
16
Instr.
–
–
–
–
3
110
–
–
–
–
8
250
–
–
–
–
9
280
–
–
–
–
3
110
–
–
–
–
4
80
–
–
–
–
8
250
–
–
–
–
9
280
–
–
–
–
12
100
A
–
100
260
–
–
–
80
110
250
280
–
–
D
35
110
250
325
–
–
A
80
110
250
280
–
–
80
125
235
280
–
–
A
80
125
235
280
–
–
D
80
110
250
280
–
–
28A51
43
A
16
28A63
28
9
12
19
16
32-1
5
2
0
E (A)
3
12
D (all others)
32-5
2
0
32-6
23
2
4
3
8
2
12
16
16
32-7
35
7
12
Instr.
28
16
(A, B, U, I.)
A (all others)
32-8
30
6
12
24
16
32-9
14
12
16
2
4
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ittcannon.com
17
CONTACT ARRANGEMENTS
View on Mating
No. of
face of Pin Insulator Contacts
Contact arrangement
Contact size
Service rating
Insulator position
W
X
Y
Z
Position
Special
polarization
D
80
110
250
280
–
–
D
35
110
250
325
–
–
D
45
110
250
–
–
–
–
–
–
–
3
110
80
110
250
280
4
80
–
–
–
–
8
250
–
–
–
–
9
280
–
–
–
–
12
100
32-13
23
5
12
18
16
32-15
8
2
0
6
12
32-17
4
4
32A10
54
16
47
A
–
–
–
–
2
260
32A47
–
–
–
–
–
3
110
16
A
–
–
–
–
4
80
–
–
–
–
8
250
–
–
–
–
9
280
–
–
–
–
12
100
32A55
55
61
16
A
80
110
250
280
–
–
32A69
Instr.
–
110
250
–
–
–
D
70
145
215
290
–
–
A
–
120
240
–
–
–
20
16
41
20
No solder pot contacts available for #10/20 contacts.
36-3
6
4
3
0
3
12
36-5
0
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
18
ittcannon.com
CONTACT ARRANGEMENTS
Position
Special
polarization
25
–
–
250
280
–
–
110
250
280
–
–
80
125
235
280
–
–
A
80
125
235
280
–
–
D
–
–
–
–
–
–
60
125
245
305
–
–
36A34
–
–
–
–
2
260
16
–
–
–
–
3
110
–
–
–
–
4
80
–
–
–
–
8
250
–
–
–
–
9
280
–
–
–
–
12
100
–
–
–
–
20
220
View on Mating face No. of Contacts Contact arrangement
Contact size
of Pin Insulator
Service rating
Insulator position
W
X
Y
Z
A
35
110
250
A
80
110
A
80
A
36-6
6
4
4
2
0
36-7
47
7
12
40
16
36-8
47
1
12
46
16
36-9
31
14
16
14
12
2
8
1
4
36-10
48
16
36-14
16
35
5
8
5
12
6
16
36-15
D (m)
16
A (all
others)
52
A
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ittcannon.com
19
CONTACT ARRANGEMENTS
View on Mating face No. of Contacts
of Pin Insulator
Contact arrangement
Contact size
Service rating
Z
Position
36A35
8
–
–
–
2
260
–
–
–
–
3
110
–
–
–
–
8
250
–
–
–
–
9
280
36A46
–
–
–
–
2
260
12
–
–
–
–
3
110
–
–
–
–
4
80
–
–
–
–
8
250
–
–
–
–
9
280
–
–
–
–
12
100
–
110
–
–
–
–
30
135
–
–
–
–
16
4
0
A
A
36A98
8
8
A
31
16
39
36A99
15
16
Instr.
50
20*
65
Special
polarization
–
4
27
♦
Insulator position
W
X
Y
No solder pot contacts available for #10/20 contacts.
*Reduced contact termination 0,3 mm2.
♦ Attention: For all insert rotations, it is possible for miss-mating to occur. It is the responsibility of the customer to ensure they have selected correctly.
ALTERNATE INSERT POSITION
Normal Position: 0°
Indicates location of centerline of key or
keyway of shells in fixed normal position.
Insert is rotated as shown by arrow and
letters.
Tolerances:
Pin insulator 10SL-20: ± 2,0°
Pin insulator 22-36: ± 1,5°
Pin mating face
Socket mating face
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
20
ittcannon.com
CONTACT ARRANGEMENTS
Contact arrangement
No. of
Contacts
Contact size
0
4
8
500
160 100
60
Contact arrangement
12
25
16
15
20
10
No. of
Contacts
Contact size
0
4
8
500
160 100
60
12
25
16
15
12S4
1
1
14S5
5
14S4
1
1
16S8
5
16-12
1
1
18-11
5
18-6
1
1
18-20
5
18-7
1
20-14
5
20-2
1
1
22-12
5
22-7
1
1
24-12
5
28-5
5
10SL4
2
2
32-1
5
14S9
2
2
16S4
2
14S6
6
16-11
2
2
18-12
6
16A11
2
2
20-8
6
18-3
2
2
20-17
6
20-23
2
2
20-22
6
22-1
2
2
22-5
6
2
4
22-8
2
22-15
6
5
1
24-9
2
28-22
6
32-5
2
36-3
6
3
36-6
6
2
10SL3
3
3
14S1
3
3
14SA7
7
14S7
3
3
16S1
7
16S5
3
3
18-9
7
2
5
16-7
3
2
18-17
7
2
5
16-10
3
3
20-15
7
7
18-5
3
2
22-28
7
7
18-21
3
3
24-2
7
18-22
3
24-10
7
20-3
3
24-27
7
20-6
3
28-10
7
20-19
3
22-2
3
18-8
8
22-9
3
20-7
8
22-21
3
22-23
8
32-15
8
2
12SA10
4
4
36A35
8
4
14S2
4
4
24-6
8
8
16-9
4
18-4
4
18-10
4
18-13
4
20-4
4
20-24
4
2
22-4
4
2
22-10
4
22-22
4
24-4
4
24-22
4
32-17
4
36-5
4
1
2
2
2
2
1
1
3
3
3
5
5
5
2
3
2
3
2
3
2
1
2
2
3
6
6
2
4
5
3
1
3
3
3
3
4
7
7
7
7
7
2
2
3
3
3
3
1
2
2
4
1
7
8
8
6
4
20-16
9
2
7
4
20-18
9
3
6
3
20A9
9
9
22-16
9
3
22-20
9
22-27
9
24-11
9
28A16
9
18-1
10
10
18-19
10
10
4
2
2
4
4
1
1
2
6
9
1
3
4
8
6
5
3
4
4
4
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ittcannon.com
5
21
20
10
Contact arrangement
No. of
Contacts
Contact size
0
4
8
500
160 100
60
Contact arrangement
12
25
16
15
20-33
11
24-20
11
24-19
12
24A24
12
12
28-9
12
6
28-51
12
12
20-11
13
20-27
22-19
28-2
14
2
12
28-20
14
10
4
32-9
14
24-5
16
24-7
16
36-14
16
20-29
17
17
20A48
19
19
22-14
19
19
28-16
20
20
28-11
22
32-6
23
32-13
23
24-28
24
20A24
24
28-12
26
36A46
27
24A28
28
28A63
28
9
19
32-8
30
6
24
36-9
31
14
14
28-15
35
32-7
35
36-15
35
35
28-21
37
37
36A98
39
28A51
43
20
10
11
No. of
Contacts
Contact size
0
4
8
500
160 100
60
12
25
16
15
20
10
28A51
43
32A47
47
36-7
47
7
40
36-8
47
1
46
36-10
48
48
13
36A34
52
52
14
14
32A10
54
54
14
14
32A55
55
55
32A69
61
20
41
36A99
65
15
50
2
12
2
16
2
3
47
6
12
5
43
9
2
14
5
6
4
18
2
16
5
18
24
24
26
27
28
1
2
35
7
8
28
31
43
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
22
ittcannon.com
MOUNTING HOLES
CA Threaded
Shell size
d1 H12
d1 H12
d2 H13
Mounting holes for connectors styles,
complete receptacle range
e
CA3100… , CA20…
CA3102…,CA02…
10SL
16,0
16,4
3,4
18,2
12S
19,1
16,4
3,4
20,6
14S
22,3
19,7
3,4
23,0
16S /16
25,5
22,9
3,4
24,6
18
28,7
26,1
3,4
27,0
20
31,8
29,5
3,4
29,4
22
35,0
32,7
3,4
31,8
24
38,2
36,0
3,9
34,9
28
44,5
42,0
3,9
39,7
32
50,9
48,3
4,5
44,5
36
57,2
53,1
4,5
49,2
HARNESSING
WIRE STRIPPING
CA Threaded connectors are designed for single wire
harnessing, if an individual wire sealing grommet is used.
Wires have to conform to wire and insulation diameters
with the data given in the following table:
Either mechanical or hot stripping can be used. Prevent conductors or insulators damage. For solder contacts, conductors have
to be pretinned.
Contact size
AWG
Crimp / solder contacts
metric
mm
AWG
metric
mm²
Note: Do not twist conductors used with crimp contacts. Do not touch
uninsulated conductors before crimping, twisting of conductors and grease
or lubricants on the wires cause poor crimp quality.
Insulation Ø
AWG
Contact size
Stripping length
metric
mm
AWG
metric
mm
–
10
4,0 + 0,4
6,0 + 0,5
–
10
–
0,75-1,0
–
1,45-2,5
16S/15S
16/15
16S /15S
16/15
16
0,75-1,5
1,6-2,8
1,60-2,8
12
25
6,0 + 0,5
12
25
12
2,5
2,9-3,5
2,9-3,5
8
60/100
11,0 + 0,8 – 0,4
160
500
13,0 + 0,8 – 0,4
–
60
–
6,0
–
3,5-4,9
4
8
100
8
10,0
4,2-5,8
5,5-6,5
0
4
160
4
16,0
6,2-9,0
7,1-9,0
0
500
0
50,0
10,5-13,0
10,5-13,0
11,0 + 0,8 – 0,4
WIRING HINTS
Strip wires carefully. Do not damage conductors and insulation. For solder connections, wires have to be pretinned.
Do not twist conductors used in crimp contacts, otherwise no perfect crimp connection will be achieved. Do not touch
conductors before crimping. Film of grease or lubricants on the strands will cause poor crimp quality.
For detailed assembly instructions please visit www.ittcannon.com and search for the keyword "CA Bayonet Assembly Instruction".
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ittcannon.com
23
SEPARATING AND COUPLING DIMENSIONS
RECEPTACLE
PLUG
CA3106E
CA3102E
CA3106E-DN
PLUG
RECEPTACLE
CA3106F
CA3102E
CA06PG/ME
PLUG
RECEPTACLE
CA3108E
CA3102E
CA3106E-DN
CA20L
CA20E
Shell size
l1
l2
l3
l4
l5
l6
l7
l8
min.
min.
min.
min.
min.
min.
max.
max.
10SL
70
70
65
80
70
65
3,5
8,0
12S
70
75
65
80
75
70
3,5
8,0
14S
70
75
65
80
75
80
3,5
8,0
16S
70
90
65
80
80
80
3,5
8,0
16
80
100
70
100
90
100
3,5
8,0
18
90
100
70
110
95
110
3,5
8,0
20
90
100
70
110
95
110
3,5
8,0
22
90
100
70
110
95
110
3,5
8,0
24
110
120
90
120
105
120
5,0
8,0
28
110
120
90
120
105
120
5,0
9,0
32
110
180
90
120
115
120
6,0
9,0
36
110
190
100
130
120
130
6,0
9,0
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
24
ittcannon.com
CANNON CA THREADED
WALL MOUNTING RECEPTACLE CLASS F, E
CA3100E
CA3100E designates a wall mounting receptacle. It mates with plugs CA3106 and CA3108. If crimp version is required please order CA3100E…F80 or CA3100E…F183.
Part No. CA
(pin insert*)
A
Thread
l1
max.
l2
±0,3
l3
max.
l4
+0,2/– 0,1
l5
max.
CA3100E10SL-**P***
5/8-24UNEF-2A
53
14,2
2,8
25,4
120
CA3100E12S-**P***
3/4-20UNEF-2A
53
14,2
3,2
28,0
120
CA3100E14S-**P***
7/8-20UNEF-2A
55
14,2
3,2
30,0
CA3100E16S-**P***
1-20UNEF-2A
56
14,2
3,2
CA3100E16-**P***
1-20UNEF-2A
66
19,0
CA3100E18-**P***
1-1/8-18UNEF-2A
68
CA3100E20-**P***
1-1/4-18UNEF-2A
CA3100E22-**P***
d1¹
d2
+0,2
e
±0,3
6,5
3,1
18,2
6,5
3,1
20,6
120
9,0
3,1
23,0
32,5
125
11,0
3,1
24,6
3,2
32,5
125
11,0
3,1
24,6
19,0
4,0
35,0
125
14,2
3,1
27,0
68
19,0
4,0
38,0
125
15,8
3,1
29,4
1-3/8-18UNEF-2A
68
19,0
4,0
41,0
125
15,8
3,1
31,8
CA3100E24-**P***
1-1/2-18UNEF-2A
76
20,6
4,0
44,5
125
21,4
3,7
34,9
CA3100E28-**P***
1-3/4-18UNS-2A
76
20,6
4,0
50,8
125
21,4
3,7
39,7
CA3100E32-**P***
2-18UNS-2A
76
22,2
4,0
57,0
125
26,7
4,4
44,5
CA3100E36-**P***
2-1/4-16UN-2A
76
22,2
4,0
63,5
135
31,7
4,4
49,2
¹ max. cable dia
CA3100R
CA3100R designates a receptacle with a shorter and lightweight backshell. It mates with plugs CA3106 and CA3108. If crimp version is required please order CA3100R…F80 or
CA3100R…F183.
Part No. CA (pin insert*)
A
Thread
l1
max.
l2
±0,3
l3
max.
l4
±0,2
d1¹
d2
±0,2
e
±0,3
CA3100R10SL-**P***
5/8-24UNEF-2A
53
14,2
2,8
CA3100R12S-**P***
3/4-20UNEF-2A
53
14,2
3,2
25,4
9,6
3,1
18,2
28,0
10,3
3,1
CA3100R14S-**P***
7/8-20UNEF-2A
55
14,2
20,6
3,2
30,0
12,4
3,1
CA3100R16S-**P***
1-20UNEF-2A
56
23,0
14,2
3,2
32,5
15,4
3,1
CA3100R16-**P***
1-20UNEF-2A
24,6
66
19,0
3,2
32,5
15,4
3,1
CA3100R18-**P***
24,6
1-1/8-18UNEF-2A
68
19,0
4,0
35,0
18,4
3,1
27,0
CA3100R20-**P***
1-1/4-18UNEF-2A
68
19,0
4,0
38,0
22,0
3,1
29,4
CA3100R22-**P***
1-3/8-18UNEF-2A
68
19,0
4,0
41,0
24,7
3,1
31,8
CA3100R24-**P***
1-1/2-18UNEF-2A
76
20,6
4,0
44,5
27,6
3,7
34,9
CA3100R28-**P***
1-3/4-18UNS-2A
76
20,6
4,0
50,8
31,6
3,7
39,7
CA3100R32-**P***
2-18UNS-2A
76
22,2
4,0
57,0
38,5
4,4
44,5
CA3100R36-**P***
2-1/4-16UN-2A
76
22,2
4,0
63,5
44,5
4,4
49,2
* For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 9-21 *** Add modification code; see page 8
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ittcannon.com
25
¹ max. cable dia
CANNON CA THREADED
WALL MOUNTING RECEPTACLE CLASS F, DN
CA3100F
CA3100F designates a wall mounting receptacle with backshell for flex tubes or to be combined with a cable clamp. It mates with plugs CA3106 and CA3108.
Part No. CA
(pin insert*)
A
Thread
d2
+0,2/– 0,1
d3¹
d4
Thread
l1
max.
l2
+0,4
l3
±0,3
I4
±0,3
l5
min.
e
±0,1
CA3100F10SL-**P-***
5/8-24UNEF-2A
3,1
8,2
5/8-24UNEF-2A
45,0
14,2
2,8
25,4
9,5
18,2
CA3100F12S-**P-***
3/4-20UNEF-2A
3,1
8,2
5/8-20UNEF-2A
45,0
14,2
3,2
28,0
9,5
20,6
CA3100F14S-**P-***
7/8-20UNEF-2A
3,1
11,1
3/4-20UNEF-2A
45,0
14,2
3,2
30,0
9,5
23,0
CA3100F16S-**P-***
1-20UNEF-2A
3,1
14,3
7/8-20UNEF-2A
45,0
14,2
3,2
32,5
9,5
24,6
CA3100F16-**P-***
1-20UNEF-2A
3,1
14,3
7/8-20UNEF-2A
54,0
19,0
3,2
32,5
9,5
24,6
CA3100F18-**P-***
1-1/8-18UNEF-2A
3,1
16,7
1-20UNEF-2A
54,0
19,0
4,0
35,0
9,5
27,0
CA3100F20-**P-***
1-1/4-18UNEF-2A
3,1
19,8
1-3/16-18UNEF-2A
55,0
19,0
4,0
38,0
9,5
29,4
CA3100F22-**P-***
1-3/8-18UNEF-2A
3,1
19,8
1-3/16-18UNEF-2A
58,0
19,0
4,0
41,0
9,5
31,8
CA3100F24-**P-***
1-1/2-18UNEF-2A
3,7
25,4
1-7/16-18UNEF-2A
59,0
20,6
4,0
44,5
9,5
34,9
CA3100F28-**P-***
1-3/4-18UNS-2A
3,7
27,0
1-7/16-18UNEF-2A
60,0
20,6
4,0
50,8
9,5
39,7
CA3100F32-**P-***
CA3100F36-**P-***
2-18UNS-2A
2-1/4-16UN-2A
4,4
4,4
32,5
35,7
1-3/4-18UNS-2A
2-18UNS-2A
62,0
64,0
22,2
22,2
4,0
4,0
57,0
63,5
11,0
11,8
44,5
49,2
¹ max. cable dia
I4
±0,5
l5
±0,3
CA3100E-DN
CA3100E-DN designates a wall mounting receptacle with backshell for heat-shrinkable boots. It mates with plugs CA3106 and CA3108.
Part No. CA (pin
insert*)
A
Thread
d2
+0,2/– 0,1
d3
±0,2
d4¹
d5
max.
l1
max.
l2
+0,4
l3
±0,3
e
±0,1
CA3100E10SL-**P-DN
5/8-24UNEF-2A
3,1
15,5
7,7
13,3
49,0
14,2
2,8
11,7
25,4
18,2
CA3100E12S-**P-DN
3/4-20UNEF-2A
3,1
15,5
7,9
13,3
49,0
14,2
3,2
11,7
28,0
20,6
CA3100E14S-**P-DN
7/8-20UNEF-2A
3,1
19,1
10,6
17,0
49,0
14,2
3,2
11,7
30,0
23,0
CA3100E16S-**P-DN
1-20UNEF-2A
3,1
23,9
13,5
21,9
49,0
14,2
3,2
11,7
32,5
24,6
CA3100E16-**P-DN
1-20UNEF-2A
3,1
23,9
13,5
21,9
58,0
19,0
3,2
11,5
32,5
24,6
CA3100E18-**P-DN
1-1/8-18UNEF-2A
3,1
23,9
14,6
21,9
58,0
19,0
4,0
11,5
35,0
27,0
CA3100E20-**P-DN
1-1/4-18UNEF-2A
3,1
29,6
18,7
26,2
60,0
19,0
4,0
12,7
35,0
27,0
CA3100E22-**P-DN
1-3/8-18UNEF-2A
3,1
29,6
20,8
26,2
60,0
19,0
4,0
12,7
41,0
31,8
CA3100E24-**P-DN
1-1/2-18UNEF-2A
3,7
37,8
24,6
34,5
63,0
20,6
4,0
12,7
44,5
34,9
CA3100E28-**P-DN
1-3/4-18UNS-2A
3,7
37,8
27,0
34,5
63,0
20,6
4,0
12,7
50,8
39,7
CA3100E32-**P-DN
2-18UNS-2A
4,4
47,8
33,3
43,6
67,0
22,2
4,0
15,2
57,0
44,5
CA3100E36-**P-DN
2-1/4-16UN-2A
4,4
47,8
38,5
43,6
68,0
22,2
4,0
15,2
63,5
49,2
* For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 10-22 *** Add modification code; see page 8
¹ max. cable dia
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
26
ittcannon.com
CANNON CA THREADED
WALL MOUNTING RECEPTACLE CLASS PG/ME, SHIELDED
CA00PG and CA00ME
CA00PG/ME designates a wall mounting receptacle for usage with PG or metric glands. It mates with plugs CA3106 and CA3108. The cable gland is not content of the delivery.
Part No. CA (pin insert*)
A
Thread
d1
+0,2/– 0,1
d2
PG-Thread
Metric
l1
max.
l2
+0,4
l3
±0,3
I4
±0,3
e
±0,1
18,2
CA00PG10SL-*P-***
CA00ME10SL-**P-***
5/8-24UNEF-2A
3,1
PG9
M16 × 1,5
52,0
14,2
2,8
25,4
CA00PG12S-**P-***
CA00ME12S-**P-***
3/4-20UNEF-2A
3,1
PG9
M16 × 1,5
52,0
14,2
3,2
28,0
20,6
CA00PG14S-**P-***
CA00ME14S-**P-***
7/8-20UNEF-2A
3,1
PG11
M20 × 1,5
52,0
14,2
3,2
30,0
23,0
CA00PG16S-*P-***
CA00ME16S-**P-***
1-20UNEF-2A
3,1
PG13,5
M20 × 1,5
54,0
14,2
3,2
32,5
24,6
CA00PG16-**P-***
CA00ME16-**P-***
1-20UNEF-2A
3,1
PG13,5
M20 × 1,5
64,0
19,0
3,2
32,5
24,6
CA00PG18-**P-***
CA00ME18-**P-***
1-1/8-18UNEF-2A
3,1
PG13,5
M25 × 1,5
69,0
19,0
4,0
35,0
27,0
CA00PG20-**P-***
CA00ME20-**P-***
1-1/4-18UNEF-2A
3,1
PG16
M25 × 1,5
70,0
19,0
4,0
38,0
29,4
CA00PG22-**P-***
CA00ME22-**P-***
1-3/8-18UNEF-2A
3,1
PG16
M32 × 1,5
73,0
19,0
4,0
41,0
31,8
CA00PG24-**P-***
CA00ME24-**P-***
1-1/2-18UNEF-2A
3,7
PG16
M32 × 1,5
74,0
20,6
4,0
44,5
34,9
CA00PG28-**P-***
CA00ME28-**P-***
1-3/4-18UNS-2A
3,7
PG21
M32 × 1,5
74,0
20,6
4,0
50,8
39,7
CA00PG32-**P-***
CA00ME32-**P-***
2-18UNS-2A
4,4
PG29
M40 × 1,5
76,0
22,2
4,0
57,0
44,5
CA00PG36-**P-***
CA00ME36-**P-***
2-1/4-16UN-2A
4,4
PG29
M40 × 1,5
87,0
22,2
4,0
63,5
49,2
CA3100E…-13/-14/-15
CA3100E…-13/-14/-15 designates a shielded wall mounting receptacle with backshell to accommodate cable braids and heat-shrinkable boots.
For Mod. codes please see page 8. It mates with plugs CA3106…-13/-14/-15.
Part No. CA
(pin insert*)
A
Thread
d1¹
d2
+0,2/– 0,1
d3
±0,5
d4
max.
l1
max.
l2
+0,4
l3
±0,3
I4
±0,5
e
±0,1
CA3100E10SL-**P-***
5/8-24UNEF-2A
7,7
3,1
18,5
16,3
55,0
14,2
2,8
25,4
18,2
CA3100E12S-**P-***
3/4-20UNEF-2A
7,9
3,1
20,0
17,0
55,0
14,2
3,2
28,0
20,6
CA3100E14S-**P-***
7/8-20UNEF-2A
10,6
3,1
22,0
20,0
58,0
14,2
3,2
30,0
23,0
CA3100E16S-**P-***
1-20UNEF-2A
13,5
3,1
25,0
23,0
70,0
14,2
3,2
32,5
24,6
CA3100E16-**P-***
1-20UNEF-2A
13,5
3,1
25,0
23,0
70,0
19,0
3,2
32,5
24,6
CA3100E18-**P-***
1-1/8-18UNEF-2A
14,6
3,1
28,0
24,5
70,0
19,0
4,0
35,0
27,0
CA3100E20-**P-***
1-1/4-18UNEF-2A
18,5
3,1
32,0
28,5
70,0
19,0
4,0
38,0
27,0
CA3100E22-**P-***
1-3/8-18UNEF-2A
20,8
3,1
34,0
30,5
70,0
19,0
4,0
41,0
31,8
CA3100E24-**P-***
1-1/2-18UNEF-2A
24,6
3,7
38,0
34,5
70,0
20,6
4,0
44,5
34,9
CA3100E28-**P-***
1-3/4-18UNS-2A
27,0
3,7
41,0
37,5
70,0
20,6
4,0
50,8
39,7
CA3100E32-**P-***
2-18UNS-2A
33,3
4,4
48,0
44,0
75,0
22,2
4,0
57,0
44,5
CA3100E36-**P-***
2-1/4-16UN-2A
38,5
4,4
55,0
51,0
85,0
22,2
4,0
63,5
49,2
* For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 10-22 *** Add modification code; see page 8
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ittcannon.com
27
¹ max. cable dia
CANNON CA THREADED
CABLE CONNECTING PLUG CLASS F, E, R
CA3101E
CA3101E designates a cable connecting plug (without flange and coupling nut). It mates with plugs CA3106 and CA3108.
Part No. CA (pin insert*)
A
Thread
d1
max.
d2¹
l1
max.
l2
+0,4
l3
±0,3
I4
max.
I5
max.
CA3101E10SL-**P***
5/8-24UNEF-2A
21,8
6,5
53,0
14,2
2,8
16,2
120
CA3101E12S-**P***
3/4-20UNEF-2A
25,0
6,5
53,0
14,2
3,2
19,4
120
CA3101E14S-**P***
7/8-20UNEF-2A
28,2
9,0
55,0
14,2
3,2
22,5
120
CA3101E16S-**P***
1-20UNEF-2A
31,4
11,0
56,0
14,2
3,2
25,7
120
CA3101E16-**P***
1-20UNEF-2A
31,4
11,0
66,0
19,0
3,2
25,7
125
CA3101E18-**P***
1-1/8-18UNEF-2A
34,5
14,2
68,0
19,0
4,0
28,9
125
CA3101E20-**P***
1-1/4-18UNEF-2A
37,3
15,8
68,0
19,0
4,0
32,1
125
CA3101E22-**P***
1-3/8-18UNEF-2A
40,9
15,8
68,0
19,0
4,0
35,2
125
CA3101E24-**P***
1-1/2-18UNEF-2A
43,8
21,4
76,0
20,6
4,0
38,4
125
CA3101E28-**P***
1-3/4-18UNS-2A
50,4
21,4
76,0
20,6
4,0
44,8
125
CA3101E32-**P***
2-18UNS-2A
56,8
26,7
76,0
22,2
4,0
51,1
125
CA3101E36-**P***
2-1/4-16UN-2A
63,1
31,7
76,0
22,2
4,0
57,5
135
¹ max. cable dia
CA3101R
CA3101R designates a cable connecting plug (without flange and coupling nut) with a shorter and lightweight backshell. It mates with plugs CA3106 and CA3108. Utilized to
realize a cable to cable connection. If crimp version is required please order CA3101R…F80 or CA3101R…F183
Part No. CA (pin insert*)
A
Thread
d1¹
l1
max.
l2
+ 0,4
l3
± 0,3
I4
± 0,2
CA3101R10SL-**P***
5/8-24UNEF-2A
9,6
53,0
14,2
2,8
16,2
CA3101R12S-**P***
3/4-20UNEF-2A
10,3
53,0
14,2
3,2
19,4
CA3101R14S-**P***
7/8-20UNEF-2A
12,4
55,0
14,2
3,2
22,5
CA3101R16S-**P***
1-20UNEF-2A
15,4
56,0
14,2
3,2
25,7
CA3101R16-**P***
1-20UNEF-2A
15,4
66,0
19,0
3,2
25,7
CA3101R18-**P***
1-1/8-18UNEF-2A
18,4
68,0
19,0
4,0
28,9
CA3101R20-**P***
1-1/4-18UNEF-2A
22,0
68,0
19,0
4,0
32,1
CA3101R22-**P***
1-3/8-18UNEF-2A
24,7
68,0
19,0
4,0
35,2
CA3101R24-**P***
1-1/2-18UNEF-2A
27,6
76,0
20,6
4,0
38,4
CA3101R28-**P***
1-3/4-18UNS-2A
31,6
76,0
20,6
4,0
44,8
CA3101R32-**P***
2-18UNS-2A
38,5
76,0
22,2
4,0
51,1
CA3101R36-**P***
2-1/4-16UN-2A
44,5
76,0
22,2
4,0
57,5
* For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 10-22 *** Add modification code; see page 8
¹ max. cable dia
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
28
ittcannon.com
CANNON CA THREADED
CABLE CONNECTING PLUG CLASS F, DN
CA3101F
CA3101F designates a cable connecting plug (without flange and coupling nut) with backshell for flex tubes or to be combined with a cable clamp. It mates with plugs
CA3106 and CA3108. Utilized to realize a cable to cable connection. If crimp version is required please order CA3101F…F80 or CA3101F…F183
Part No. CA (pin insert*)
A
Thread
d1
max.
d2¹
d3
Thread
L1
max.
L2
+0,4
L3
±0,3
L4
min.
L5
±0,2
CA3101F10SL-**P-***
5/8-24UNEF-2A
21,8
8,2
5/8-24UNEF-2A
45,0
14,2
2,8
9,5
16,2
CA3101F12S-**P-***
3/4-20UNEF-2A
25,0
8,2
5/8-20UNEF-2A
45,0
14,2
3,2
9,5
19,4
CA3101F14S-**P-***
7/8-20UNEF-2A
28,2
11,1
3/4-20UNEF-2A
45,0
14,2
3,2
9,5
22,5
CA3101F16S-**P-***
1-20UNEF-2A
31,4
14,3
7/8-20UNEF-2A
45,0
14,2
3,2
9,5
25,7
CA3101F16-**P-***
1-20UNEF-2A
31,4
14,3
7/8-20UNEF-2A
54,0
14,2
3,2
9,5
25,7
CA3101F18-**P-***
1-1/8-18UNEF-2A
34,5
16,7
1-20UNEF-2A
54,0
19,0
4,0
9,5
28,9
CA3101F20-**P-***
1-1/4-18UNEF-2A
37,3
19,8
1-3/16-18UNEF-2A
55,0
19,0
4,0
9,5
32,1
CA3101F22-**P-***
1-3/8-18UNEF-2A
40,9
19,8
1-3/16-18UNEF-2A
58,0
20,6
4,0
9,5
35,2
CA3101F24-**P-***
1-1/2-18UNEF-2A
43,8
25,4
1-7/16-18UNEF-2A
59,0
20,6
4,0
9,5
38,4
CA3101F28-**P-***
1-3/4-18UNS-2A
50,4
27,0
1-7/16-18UNEF-2A
60,0
20,6
4,0
9,5
44,8
CA3101F32-**P-***
2-18UNS-2A
56,8
32,5
1-3/4-18UNS-2A
62,0
22,2
4,0
11,0
51,1
CA3101F36-**P-***
2-1/4-16UN-2A
63,1
35,7
2-18UNS-2A
64,0
22,2
4,0
11,8
57,5
¹ max. cable dia
CA3101E-DN
CA3101E-DN designates a cable connecting plug (without flange and coupling nut) with backshell for heat-shrinkable boots. It mates with plugs CA3106 and
CA3108. Utilized to realize a cable to cable connection. If crimp version is required please order CA3101E-DN-F80 or CA3101E-DN-F183
Part No. CA (pin insert*)
A
Thread
d1
max.
d2¹
d3
±0,5
d4
±0,2
l1
max.
l2
±0,3
l3
±0,3
l4
max.
l5
±0,2
CA3101E10SL-**P-DN
5/8-24UNEF-2A
21,8
7,7
15,5
7,7
49,0
14,2
2,8
11,7
16,2
CA3101E12S-**P-DN
3/4-20UNEF-2A
25,0
7,9
15,5
7,9
49,0
14,2
3,2
11,7
19,4
CA3101E14S-**P-DN
7/8-20UNEF-2A
28,2
10,6
19,1
10,6
49,0
14,2
3,2
11,7
22,5
CA3101E16S-**P-DN
1-20UNEF-2A
31,4
13,5
23,9
13,5
49,0
14,1
3,2
11,7
25,7
CA3101E16-**P-DN
1-20UNEF-2A
31,4
13,5
23,9
13,5
58,0
19,0
3,2
11,5
25,7
CA3101E18-**P-DN
1-1/8-18UNEF-2A
34,5
14,6
23,9
14,6
58,0
19,0
4,0
11,5
28,9
CA3101E20-**P-DN
1-1/4-18UNEF-2A
37,3
18,7
29,6
18,7
60,0
19,0
4,0
12,7
32,1
CA3101E22-**P-DN
1-3/8-18UNEF-2A
40,9
20,8
29,6
20,8
60,0
19,0
4,0
12,7
35,2
CA3101E24-**P-DN
1-1/2-18UNEF-2A
43,8
24,6
37,8
24,6
63,0
20,6
4,0
12,7
38,4
CA3101E28-**P-DN
1-3/4-18UNS-2A
50,4
27,0
37,8
27,0
63,0
20,6
4,0
12,7
44,8
CA3101E32-**P-DN
2-18UNS-2A
56,8
33,3
47,8
33,3
67,0
22,2
4,0
15,2
51,1
CA3101E36-**P-DN
2-1/4-16UN-2A
63,1
38,5
47,8
38,5
68,0
22,2
4,0
15,2
57,5
* For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 10-22 *** Add modification code; see page 8
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ittcannon.com
29
¹ max. cable dia
CANNON CA THREADED
CABLE CONNECTING PLUG PG/ME, SHIELDED
CA01PG and CA01ME
CA01PG/ME designates a cable connecting plug (without flange and coupling nut) for usage with PG or metric glands.
It mates with plugs CA3106 and CA3108. The cable gland is not content of the delivery.
Part No. CA (pin insert*)
A
Thread
d1
max.
d2
PG-Thread
Metric
d4
max.
l2
+0,4
l3
±0,3
I4
max.
CA01PG10SL-**P-***
CA01ME10SL-**P-***
5/8-24UNEF-2A
16,2
PG9
M16 × 1,5
52,0
14,2
2,8
21,8
CA01PG12S-**P-***
CA01ME12S-**P-***
3/4-20UNEF-2A
19,4
PG9
M16 × 1,5
52,0
14,2
3,2
25,0
CA01PG14S-**P-***
CA01ME14S-**P-***
7/8-20UNEF-2A
22,5
PG11
M20 × 1,5
52,0
14,2
3,2
28,2
CA01PG16S-**P-***
CA01ME16S-**P-***
1-20UNEF-2A
25,7
PG13,5
M20 × 1,5
54,0
14,2
3,2
31,4
CA01PG16-**P-***
CA01ME16-**P-***
1-20UNEF-2A
25,7
PG13,5
M20 × 1,5
64,0
19,0
3,2
31,4
CA01PG18-**P-***
CA01ME18-**P-***
1-1/8-18UNEF-2A
28,9
PG13,5
M25 × 1,5
69,0
19,0
4,0
34,5
CA01PG20-**P-***
CA01ME20-**P-***
1-1/4-18UNEF-2A
32,1
PG16
M25 × 1,5
70,0
19,0
4,0
37,3
CA01PG22-**P-***
CA01ME22-**P-***
1-3/8-18UNEF-2A
35,2
PG16
M32 × 1,5
73,0
19,0
4,0
40,9
CA01PG24-**P-***
CA01ME24-**P-***
1-1/2-18UNEF-2A
38,4
PG16
M32 × 1,5
74,0
20,6
4,0
43,8
CA01PG28-**P-***
CA01ME28-**P-***
1-3/4-18UNS-2A
44,8
PG21
M32 × 1,5
74,0
20,6
4,0
50,4
CA01PG32-**P-***
CA01ME32-**P-***
2-18UNS-2A
51,1
PG29
M40 × 1,5
76,0
22,2
4,0
56,8
CA01PG36-**P-***
CA01ME36-**P-***
2-1/4-16UN-2A
57,5
PG29
M40 × 1,5
87,0
22,2
4,0
63,1
CA3101E…-13/-14/-15
CA3101E…-13/-14/-15 designates a shielded cable connecting plug (without flange and coupling nut) to accommodate cable braids and heat-shrinkable boots.
For Mod. codes please see page 8. It mates with plugs CA3106…-13/-14/-15. Utilized to realize a cable to cable connection.
A
Thread
d1¹
d2
±0,5
d3
max.
l1
max.
l2
±0,3
l3
±0,3
l4
max.
CA3101E10SL-**P-***
5/8-24UNEF-2A
7,7
18,5
16,3
55,0
14,2
2,8
16,2
CA3101E12S-**P-***
3/4-20UNEF-2A
7,9
20,0
17,0
55,0
14,2
3,2
19,4
CA3101E14S-**P-***
7/8-20UNEF-2A
10,6
22,0
20,0
58,0
14,2
3,2
22,5
CA3101E16S-**P-***
1-20UNEF-2A
13,5
25,0
23,0
70,0
14,1
3,2
25,7
CA3101E16-**P-***
1-20UNEF-2A
13,5
25,0
23,0
70,0
19,0
3,2
25,7
CA3101E18-**P-***
1-1/8-18UNEF-2A
14,6
28,0
24,5
70,0
19,0
4,0
28,9
CA3101E20-**P-***
1-1/4-18UNEF-2A
14,6
32,0
28,5
70,0
19,0
4,0
32,1
CA3101E22-**P-***
1-3/8-18UNEF-2A
20,8
34,0
30,5
70,0
19,0
4,0
35,2
CA3101E24-**P-***
1-1/2-18UNEF-2A
24,6
38,0
34,5
70,0
20,6
4,0
38,4
CA3101E28-**P-***
1-3/4-18UNS-2A
27,0
41,0
37,5
70,0
20,6
4,0
44,8
CA3101E32-**P-***
2-18UNS-2A
33,3
48,0
44,0
75,0
22,2
4,0
51,1
CA3101E36-**P-***
2-1/4-16UN-2A
38,5
55,0
51,0
85,0
22,2
4,0
57,5
Part No. CA
(pin insert*)
* For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 10-22 *** Add modification code; see page 8
¹ max. cable dia
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
30
ittcannon.com
CANNON CA THREADED
BOX MOUNTING RECEPTACLE
CA3102
CA3102E designates a box mounting receptacle for front panel mounting with square flange. It mates with plugs CA3106 and CA3108.
If crimp version is required please order CA3102E…F80 or CA3102E…F183.
Dimension X max for pin or socket (solder contacts only)
Shell size
Contact size
16
12
8
4
0
10SL
13,6
–
–
–
–
12S,14S,16S
13,2
–
–
–
–
12
17,9 17,9
–
–
–
14
17,9 17,9 19,5
–
–
16
17,9 17,9 19,5 19,5
–
18
17,1 17,1 18,7 18,7
–
20, 22
17,1 17,1 18,7 18,7 24,7
24, 28
15,5 15,5 17,1 17,1 23,1
32, 36
13,9 13,9 15,5 15,5 21,5
A
Thread
l1
max.
l2
+0,4
l3
±0,7
l4
±0,3
d1
max.
d2
+0,2/– 0,1
e
±0,1
CA3102E10SL-**P***
5/8-24UNEF-2A
25,1
14,2
3,0
25,4
15,9
3,1
18,2
CA3102E12S-**P***
3/4-20UNEF-2A
25,1
14,2
3,0
28,0
15,9
3,1
20,6
CA3102E14S-**P***
7/8-20UNEF-2A
25,1
14,2
3,0
30,0
19,0
3,1
23,0
CA3102E16S-**P***
1-20UNEF-2A
25,1
14,2
3,0
32,5
22,2
3,1
24,6
CA3102E16-**P***
1-20UNEF-2A
34,6
19,0
3,0
32,5
22,2
3,1
24,6
CA3102E18-**P***
1-1/8-18UNEF-2A
34,6
19,0
3,9
35,0
25,4
3,1
27,0
CA3102E20-**P***
1-1/4-18UNEF-2A
34,6
19,0
3,9
38,0
29,0
3,1
29,4
CA3102E22-**P***
1-3/8-18UNEF-2A
34,6
19,0
3,9
41,0
32,2
3,1
31,8
CA3102E24-**P***
1-1/2-18UNEF-2A
36,2
20,6
3,9
44,5
35,3
3,7
34,9
CA3102E28-**P***
1-3/4-18UNS-2A
36,2
20,6
3,9
50,8
41,2
3,7
39,7
CA3102E32-**P***
2-18UNS-2A
37,8
22,2
3,9
57,0
47,6
4,4
44,5
Part No. CA
(pin insert*)
CA3102E36-**P***
2-1/4-16UN-2A
37,8
22,2
3,9
63,5
52,4
4,4
49,2
Note: Older versions also used the designation CA3102R instead of the CA3102E. These parts would be identical but the designation is no longer valid.
CA20E
CA20E designates a box mounting receptacle for rear panel mounting. It mates with plugs CA3106 and CA3108.
d2
A
Thread
d1
max.
H13
Code: BM29
l1
max.
l2
+0,4
l3
±0,3
L4
±0,3
e
±0,1
CA20E10SL-**-P-***
5/8-24UNEF-2A
14,5
3,2
M4
25,1
18,2
2,8
25.4
18,2
CA20E12S-**-P-***
3/4-20UNEF-2A
16,1
3,2
M4
25,1
18,2
3,2
28.0
20,6
CA20E14S-**-P-***
7/8-20UNEF-2A
19,2
3,2
M4
25,1
18,2
3,2
30.0
23,0
CA20E16S-**-P-***
1-20UNEF-2A
22,4
3,2
M4
25,1
18,2
3,2
32.5
24,6
CA20E16-**-P-***
1-20UNEF-2A
22,4
3,2
M4
34,2
21,5
3,2
32.5
24,6
CA20E18-**-P-***
1-1/8-18UNEF-2A
25,6
3,2
M4
34,2
23,05
4,0
35.0
27,0
CA20E20-**-P-***
1-1/4-18UNEF-2A
29,0
3,2
M4
34,2
23,05
4,0
38.0
29,4
CA20E22-**-P-***
1-3/8-18UNEF-2A
32,2
3,2
M4
34,2
23,05
4,0
41.0
31,8
CA20E24-**-P-***
1-1/2-18UNEF-2A
35,3
3,7
M5
34,2
24,05
4,0
44.5
34,9
CA20E28-**-P-***
1-3/4-18UNS-2A
41,4
3,7
M5
34,2
24,05
4,0
50.8
39,7
CA20E32-**-P-***
2-18UNS-2A
47,8
4,4
M6
34,2
24,05
4,0
57.0
44,5
CA20E36-**-P-***
2-1/4-16UN-2A
54,1
4,4
M6
34,2
24,05
4,0
63.5
49,2
Part No. CA
(pin insert*)
* For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 10-22 *** Add modification code; see page 8
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ittcannon.com
31
CANNON CA THREADED
BOX MOUNTING RECEPTACLE PCB VERSION
CA02L
CA02L designates a box mounting receptacle for front panel mounting with PCB termination. It mates with plugs CA3106 and CA3108. Available for contact arrangements
with #16 contacts only. For #12 contacts consult factory.
9-0,1
Part No. CA (pin insert*)
A
Thread
d1
max.
d2
+0,2/– 0,1
l1
max.
l2
+0,4
l3
0,3
l4
0,3
e
0,1
CA02L10SL-**-P-***
5/8-24UNEF-2A
15,9
3,1
25,1
14,2
2,8
25,4
18,2
CA02L12S-**-P-***
3/4-20UNEF-2A
15,9
3,1
25,1
14,2
3,2
28,0
20,6
CA02L14S-**-P-***
7/8-20UNEF-2A
19,0
3,1
25,1
14,2
3,2
30,0
23,0
CA02L16S-**-P-***
1-20UNEF-2A
22,2
3,1
25,1
14,2
3,2
32,5
24,6
CA02L16-**-P-***
1-20UNEF-2A
22,2
3,1
34,2
19,0
3,2
32,5
24,6
CA02L18-**-P-***
1-1/8-18UNEF-2A
25,4
3,1
34,2
19,0
4,0
35,0
27,0
CA02L20-**-P-***
1-1/4-18UNEF-2A
29,0
3,1
34,2
19,0
4,0
38,0
29,4
CA02L22-**-P-***
1-3/8-18UNEF-2A
32,2
3,1
34,2
19,0
4,0
41,0
31,8
CA02L24-**-P-***
1-1/2-18UNEF-2A
35,3
3,7
34,2
20,6
4,0
44,5
34,9
CA02L28-**-P-***
1-3/4-18UNS-2A
41,2
3,7
34,2
20,6
4,0
50,8
39,7
CA02L32-**-P-***
2-18UNS-2A
47,6
4,4
34,2
22,2
4,0
57,0
44,5
CA02L36-**-P-***
2-1/4-16UN-2A
52,4
4,4
34,2
22,2
4,0
63,5
49,2
CA20L
CA20L designates a box mounting receptacle for rear panel mounting with PCB termination. It mates with plugs CA3106 and CA3108. Available for contact arrangements
with #16 contacts only. For #12 contacts consult factory.
9-0,1
Part No. CA (pin insert*)
d2
Code BM29
M4
A
Thread
d1
max.
CA20L10SL-**-P-***
5/8-24UNEF-2A
14,5
H13 (Std.)
3,2
l1
max.
l2
0,4
l3
±0,3
l4
±0,3
e
±0,1
CA20L12S-**-P-***
3/4-20UNEF-2A
16,1
3,2
M4
25,1
18,2
2,8
25.4
18,2
25,1
18,2
3,2
28.0
CA20L14S-**-P-***
7/8-20UNEF-2A
19,2
3,2
20,6
M4
25,1
18,2
3,2
30.0
CA20L16S-**-P-***
1-20UNEF-2A
22,4
23,0
3,2
M4
25,1
18,2
3,2
32.5
CA20L16-**-P-***
1-20UNEF-2A
24,6
22,4
3,2
M4
34,2
21,5
3,2
32.5
CA20L18-**-P-***
24,6
1-1/8-18UNEF-2A
25,6
3,2
M4
34,2
23,05
4,0
35.0
27,0
CA20L20-**-P-***
1-1/4-18UNEF-2A
29,0
3,2
M4
34,2
23,05
4,0
38.0
29,4
CA20L22-**-P-***
1-3/8-18UNEF-2A
32,2
3,2
M4
34,2
23,05
4,0
41.0
31,8
CA20L24-**-P-***
1-1/2-18UNEF-2A
35,3
3,7
M5
34,2
24,05
4,0
44.5
34,9
CA20L28-**-P-***
1-3/4-18UNS-2A
41,4
3,7
M5
34,2
24,05
4,0
50.8
39,7
CA20L32-**-P-***
2-18UNS-2A
47,8
4,4
M6
34,2
24,05
4,0
57.0
44,5
CA20L36-**-P-***
2-1/4-16UN-2A
54,1
4,4
M6
34,2
24,05
4,0
63.5
49,2
* For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 10-22 *** Add modification code; see page 8
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
32
ittcannon.com
CANNON CA THREADED
STRAIGHT PLUG GENERAL DUTY CLASS E, R
CA06R/CA3106E
CA06R and CA3106E are straight plugs. They mate with 3100, 3102, CA02L, CA20E, CA20L receptacles and 3101 plugs. If crimp version is required please order CA3106E...F80/F183
(without O-ring) or CA06R...F80/F183 (with O-ring).
Part No. CA (pin insert*)
A
Thread
d1
max.
d2¹
l1
max.
l2
max.
CA06R10SL-**P***
5/8-24UNEF-2B
24,1
6,5
53,0
115,0
CA06R12S-**P***
3/4-20UNEF-2B
25,8
6,5
53,0
115,0
CA06R14S-**P***
7/8-20UNEF-2B
28,8
9,0
55,0
115,0
CA06R16S-**P***
1-20UNEF-2B
31,8
11,0
56,0
115,0
CA06R16-**P***
CA06R18-**P***
CA06R20-**P***
1-20UNEF-2B
1-1/8-18UNEF-2B
1-1/4-18UNEF-2B
31,8
34,1
37,4
11,0
14,2
15,8
66,0
68,0
68,0
120,0
120,0
120,0
CA06R22-**P***
1-3/8-18UNEF-2B
40,5
15,8
68,0
120,0
CA06R24-**P***
1-1/2-18UNEF-2B
43,8
21,4
76,0
120,0
CA06R28-**P***
1-3/4-18UNS-2B
50,2
21,4
76,0
120,0
CA06R32-**P***
2-18UNS-2B
56,4
26,7
76,0
120,0
CA06R36-**P***
2-1/4-16UN-2B
62,8
31,7
76,0
130,0
¹ max. cable dia
CA3106R
The CA3106R straight plug has a shorter lightweight backshell than CA3106E. It contains an O-ring seal under the coupling nut.
CA3106R plugs mate with 3100, 3102, CA02L, CA20E, CA20L receptacles and 3101 plugs. If crimp version is required please order CA3106R…F80, CA3106R…F183.
Part No. CA (pin insert*)
A
Thread
d1
max.
d2¹
l1
max.
CA3106R10SL-**P***
5/8-24UNEF-2B
CA3106R12S-**P***
3/4-20UNEF-2B
24,1
9,6
53,0
25,8
10,3
CA3106R14S-**P***
53,0
7/8-20UNEF-2B
28,8
12,4
55,0
CA3106R16S-**P***
1-20UNEF-2B
31,8
15,4
56,0
CA3106R16-**P***
1-20UNEF-2B
31,8
15,4
66,0
CA3106R18-**P***
1-1/8-18UNEF-2B
34,1
18,4
68,0
CA3106R20-**P***
1-1/4-18UNEF-2B
37,4
22,0
68,0
CA3106R22-**P***
1-3/8-18UNEF-2B
40,5
24,7
68,0
CA3106R24-**P***
1-1/2-18UNEF-2B
43,8
27,6
76,0
CA3106R28-**P***
1-3/4-18UNS-2B
50,2
31,6
76,0
CA3106R32-**P***
2-18UNS-2B
56,4
38,5
76,0
CA3106R36-**P***
2-1/4-16UN-2B
62,8
44,5
76,0
* For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 10-22 *** Add modification code; see page 8
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ittcannon.com
33
¹ max. cable dia
CANNON CA THREADED
STRAIGHT PLUG CLASS F, DN
CA3106F
CA3106F designates a straight plug with backshell for flex tubes or to be combined with a cable clamp. It mates with receptacles 3100, 3102, CA02L, CA20E, CA20L and
3101 plugs.
A
Thread
d1
max.
d2¹
d3
Thread
l1
max.
l2
min.
CA3106F10SL-**P
5/8-24UNEF-2B
24,1
8,2
5/8-24UNEF-2A
45,0
9,5
CA3106F12S-**P
3/4-20UNEF-2B
25,8
8,2
5/8-20UNEF-2A
45,0
9,5
CA3106F14S-**P
7/8-20UNEF-2B
28,8
11,1
3/4-20UNEF-2A
45,0
9,5
CA3106F16S-**P
1-20UNEF-2B
31,8
14,3
7/8-20UNEF-2A
45,0
9,5
CA3106F16-**P
1-20UNEF-2B
31,8
14,3
7/8-20UNEF-2A
54,0
9,5
CA3106F18-**P
1-1/8-18UNEF-2B
34,1
16,7
1-20UNEF-2A
54,0
9,5
CA3106F20-**P
1-1/4-18UNEF-2B
37,4
19,8
1-3/16-18UNEF-2A
55,0
9,5
CA3106F22-**P
1-3/8-18UNEF-2B
40,5
19,8
1-3/16-18UNEF-2A
58,0
9,5
CA3106F24-**P
1-1/2-18UNEF-2B
43,8
25,4
1-7/16-18UNEF-2A
59,0
9,5
CA3106F28-**P
1-3/4-18UNS-2B
50,2
27,0
1-7/16-18UNEF-2A
60,0
9,5
CA3106F32-**P
2-18UNS-2B
56,4
32,5
1-3/4-18UNS-2A
62,0
11,0
CA3106F36-**P
2-1/4-16UN-2B
62,8
35,7
2-18UNS-2A
64,0
11,8
Part No. CA
(pin insert*)
¹ max. cable dia
CA3106E-DN
CA3106E-DN designates a straight plug with backshell for heat-shrinkable boots. CA3106E-DN has an O-ring seal under the coupling nut.
It mates with receptacles 3100, 3102, CA02L, CA20E, CA20L and 3101 plugs
+/
A
Thread
d1
max.
d2¹
d3
max.
d4
±0,2
l1
max.
l2
±0,5
CA3106E10SL-**P-DN
5/8-24UNEF-2B
24,1
7,7
13,3
15,5
49,0
11,7
CA3106E12S-**P-DN
3/4-20UNEF-2B
25,8
7,9
13,3
15,5
49,0
11,7
CA3106E14S-**P-DN
7/8-20UNEF-2B
28,8
10,6
17,0
19,1
49,0
11,7
CA3106E16S-**P-DN
1-20UNEF-2B
31,8
13,5
21,9
23,9
49,0
11,7
CA3106E16-**P-DN
1-20UNEF-2B
31,8
13,5
21,9
23,9
58,0
11,5
CA3106E18-**P-DN
1-1/8-18UNEF-2B
34,1
14,6
21,9
23,9
58,0
11,5
CA3106E20-**P-DN
1-1/4-18UNEF-2B
37,4
18,7
26,2
29,6
60,0
12,7
CA3106E22-**P-DN
1-3/8-18UNEF-2B
40,5
20,8
26,2
29,6
60,0
12,7
CA3106E24-**P-DN
1-1/2-18UNEF-2B
43,8
24,6
34,5
37,8
63,0
12,7
CA3106E28-**P-DN
1-3/4-18UNS-2B
50,2
27,0
34,5
37,8
63,0
12,7
CA3106E32-**P-DN
2-18UNS-2B
56,4
33,3
43,6
47,8
67,0
15,2
CA3106E36-**P-DN
2-1/4-16UN-2B
62,8
38,5
43,6
47,8
68,0
15,2
Part No. CA
(pin insert*)
* For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 10-22 *** Add modification code; see page 8
¹ max. cable dia
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
34
ittcannon.com
CANNON CA THREADED
STRAIGHT PLUG PG/ME, SHIELDED
CA3106E…-13/-14/-15
CA3106E…-13/-14/-15 is a shielded straight plug with backshell to accommodate cable braids and heat-shrinkable boots. It has an O-ring under the coupling nut. It mates
with receptacles 3100E…-13/-14/-15, 3102, CA02L, CA20E, CA20L and 3101…-13/-14/-15 plugs.
A
Thread
d1
max.
d2¹
d3
±0,5
d4
max.
l1
max.
l1
max.
CA3106E10SL-**P**
5/8-24UNEF-2B
24,1
7,7
18,5
16,3
55,0
55,0
CA3106E12S-**P**
3/4-20UNEF-2B
25,8
7,9
20,0
17,0
55,0
55,0
CA3106E14S-**P**
7/8-20UNEF-2B
28,8
10,6
22,0
20,0
55,0
55,0
CA3106E16S-**P**
1-20UNEF-2B
31,8
13,5
25,0
23,0
60,0
60,0
CA3106E16-**P**
1-20UNEF-2B
31,8
13,5
25,0
23,0
70,0
70,0
CA3106E18-**P**
1-1/8-18UNEF-2B
34,1
14,6
28,0
24,5
70,0
70,0
CA3106E20-**P**
1-1/4-18UNEF-2B
37,4
14,6
32,0
28,5
70,0
70,0
CA3106E22-**P**
1-3/8-18UNEF-2B
40,5
20,8
34,0
30,5
70,0
70,0
CA3106E24-**P**
1-1/2-18UNEF-2B
43,8
24,6
38,0
34,5
70,0
70,0
CA3106E28-**P**
1-3/4-18UNS-2B
50,2
27,0
41,0
37,5
70,0
70,0
CA3106E32-**P**
2-18UNS-2B
56,4
33,3
48,0
44,0
70,0
70,0
CA3106E36-**P**
2-1/4-16UN-2B
62,8
38,5
55,0
51,0
80,0
80,0
Part No. CA
(pin insert*)
¹ max. cable dia
CA06PG/ME
CA06PG/ME is a straight plug for usage of PG or metric glands. CA06PG / ME has an O-ring seal under the coupling nut. The cable gland is not content of the delivery. It
mates with receptacles 3100, 3102, CA02L, CA20E, CA20L and 3101 plugs.
Part No. CA
(pin insert*)
d2
A
Thread
d1
max.
PG-Thread
Metric
l1
max.
CA06PG10SL-**P-***
CA06ME10SL-*P-***
5/8-24UNEF-2B
24,1
PG9
M16 × 1,5
52,0
CA06PG12S-**P-***
CA06ME12S-**P-***
3/4-20UNEF-2B
25,8
PG9
M16 × 1,5
52,0
CA06PG14S-**P-***
CA06ME14S-**P-***
7/8-20UNEF-2B
28,8
PG11
M20 × 1,5
52,0
CA06PG16S-**P-***
CA06ME16S-*P-***
1-20UNEF-2B
31,8
PG13,5
M20 × 1,5
54,0
CA06PG16-**P-***
CA06ME16-**P-***
1-20UNEF-2B
31,8
PG13,5
M20 × 1,5
64,0
CA06PG18-**P-***
CA06ME18-**P-***
1-1/8-18UNEF-2B
34,1
PG13,5
M25 × 1,5
69,0
CA06PG20-**P-***
CA06ME20-**P-***
1-1/4-18UNEF-2B
37,4
PG16
M25 × 1,5
70,0
CA06PG22-**P-***
CA06ME22-**P-***
1-3/8-18UNEF-2B
40,5
PG16
M32 × 1,5
73,0
CA06PG24-**P-***
CA06ME24-**P-***
1-1/2-18UNEF-2B
43,8
PG16
M32 × 1,5
74,0
CA06PG28-**P-***
CA06ME28-**P-***
1-3/4-18UNS-2B
50,2
PG21
M32 × 1,5
74,0
CA06PG32-**P-***
CA06ME32-**P-***
2-18UNS-2B
56,4
PG29
M40 × 1,5
76,0
CA06PG36-**P-***
CA06ME36-**P-***
2-1/4-16UN-2B
62,8
PG29
M40 × 1,5
87,0
* For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 10-22 *** Add modification code; see page 8
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ittcannon.com
35
CANNON CA THREADED
90° PLUG
CA3108E
4
CA3108E are right angle plugs which mate with receptacles 3100, 3102, CA02L, CA20E, CA20L and 3101 plugs.
If crimp version is required please order CA3108E…F80 (without O-ring), CA3108E…F183 (without O-ring).
A
Thread
d1
max.
d2¹
l1
max.
l2
max.
l3
max.
l4
max.
CA3108E10SL-**P***
5/8-24UNEF-2B
24,1
6,5
45,0
42,0
22,7
100
CA3108E12S-**P***
3/4-20UNEF-2B
25,8
6,5
45,0
42,0
22,7
100
CA3108E14S-**P***
7/8-20UNEF-2B
28,8
9,0
47,0
42,0
27,5
100
CA3108E16S-**P***
1-20UNEF-2B
31,8
11,0
48,0
45,0
30,0
100
CA3108E16-**P***
1-20UNEF-2B
31,8
11,0
48,0
45,0
30,0
100
CA3108E18-**P***
1-1/8-18UNEF-2B
34,1
14,2
58,0
53,0
33,0
100
CA3108E20-**P***
1-1/4-18UNEF-2B
37,4
15,8
61,0
53,0
37,5
100
CA3108E22-**P***
1-3/8-18UNEF-2B
40,5
15,8
61,0
53,0
37,5
100
CA3108E24-**P***
1-1/2-18UNEF-2B
43,8
21,4
66,0
58,0
43,3
100
CA3108E28-**P***
1-3/4-18UNS-2B
50,2
21,4
66,0
58,0
43,3
100
CA3108E32-**P***
2-18UNS-2B
56,4
26,7
72,0
66,0
51,7
110
CA3108E36-**P***
2-1/4-16UN-2B
62,8
31,7
75,0
69,0
58,0
110
Part No. CA
(pin insert*)
¹ max. cable dia
CA3108R
CA3108R are right angle plugs which mate with receptacles CA3100, CA3101, CA3102, CA02L, CA20E and CA20L. CA 3108R comes without cable clamp. If crimp version is
required please order CA3108R…F80 (with O-ring), CA3108R…F183 (with O-ring). It mates with receptacles 3100, 3102, CA02L, CA20L and 3101 plugs.
A
Thread
d1
max.
d2
Thread
l1
max.
l2
min.
l3
max.
CA3108R10SL-**P***
5/8-24UNEF-2B
24,1
5/8-24UNEF-2A
45,0
9,4
22,0
CA3108R12S-**P***
3/4-20UNEF-2B
25,8
5/8-20UNEF-2A
45,0
9,4
22,0
CA3108R14S-**P***
7/8-20UNEF-2B
28,8
3/4-20UNEF-2A
47,0
9,4
24,0
CA3108R16S-**P***
1-20UNEF-2B
31,8
7/8-20UNEF-2A
48,0
9,4
25,0
CA3108R16-**P***
1-20UNEF-2B
31,8
7/8-20UNEF-2A
48,0
9,4
25,0
CA3108R18-**P***
1-1/8-18UNEF-2B
34,1
1-20UNEF-2A
58,0
9,4
27,0
CA3108R20-**P***
1-1/4-18UNEF-2B
37,4
1-3/16-18UNEF-2A
61,0
9,4
29,0
CA3108R22-**P***
1-3/8-18UNEF-2B
40,5
1-3/16-18UNEF-2A
61,0
9,4
30,0
CA3108R24-**P***
1-1/2-18UNEF-2B
43,8
1-7/16-18UNEF-2A
66,0
9,4
32,0
CA3108R28-**P***
1-3/4-18UNS-2B
50,2
1-7/16-18UNEF-2A
66,0
9,4
34,0
CA3108R32-**P***
2-18UNS-2B
56,4
1-3/4-18UNS-2A
72,0
11,0
39,5
CA3108R36-**P***
2-1/4-16UN-2B
62,8
2-18UNS-2A
75,0
12,6
45,0
Part No. CA
(pin insert*)
* For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 10-22 *** Add modification code; see page 8
¹ max. cable dia
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
36
ittcannon.com
CANNON CA/TBF THREADED
STRAIGHT PLUG ENFORCED BACKSHELL, THROUGH-BULKHEAD CLASS E, R
CA06EA
CA06EA is a straight plug with adapter for gland nut sealing and cable clamp. It is designed for usage with jacketed cable. It provides cable strain relief, individual wire
sealing plus sealing of the outer cable jacket. It has an O-ring under the coupling nut. It mates with receptacles 3100, 3102, CA02L, CA20E, CA20L and 3101 plugs
A
Thread
d1
max.
d2
max.
d3¹
l1
max.
CA06EA14S-**P***
7/8-20UNEF-2B
28,8
24,2
11,2
102,0
CA06EA16S-**P***
1-20UNEF-2B
31,8
27,2
13,5
102,0
CA06EA16-**P***
1-20UNEF-2B
31,8
27,2
13,5
112,0
CA06EA18-**P***
1-1/8-18UNEF-2B
34,1
32,2
15,9
112,0
CA06EA20-**P***
1-1/4-18UNEF-2B
37,4
35,2
19,1
112,0
CA06EA22-**P***
1-3/8-18UNEF-2B
40,5
37,2
19,1
112,0
CA06EA24-**P***
1-1/2-18UNEF-2B
43,6
41,2
23,9
115,0
CA06EA28-**P***
1-3/4-18UNS-2B
50,2
47,2
23,9
115,0
CA06EA32-**P***
2-18UNS-2B
56,4
53,2
31,8
120,0
CA06EA36-**P***
2-1/4-16UN-2B
62,8
59,2
34,9
120,0
Part No. CA
(pin insert*)
¹ max. cable dia
THRU-BULKHEADT
TBF
TBF designates a thru-bulkhead featured by a double face construction allowing mating from both ends. It mates with 3106 and 3108 plugs.
3
Socket side
Part No. TBF
Pin side
A
Thread
l1
max.
l2
+0,4
l3
±0,3
e
±0,1
d2
+0,2/– 0,1
TBF10SL-**-**PS***
5/8-24UNEF-2A
40,1
14,2
25,4
18,2
3,1
TBF14S-**-**PS***
7/8-20UNEF-2A
40,1
14,2
30,0
23,0
3,1
TBF16S-**-**PS***
1-20UNEF-2A
40,1
14,2
32,5
24,6
3,1
TBF16-**-**PS***
1-20UNEF-2A
54,4
19,0
32,5
29,4
3,1
TBF18-**-**PS***
1-1/8-18UNEF-2A
54,4
19,0
35,0
31,8
3,1
TBF20-**-**PS***
1-1/4-18UNEF-2A
54,4
19,0
38,0
29,4
3,1
TBF22-**-**PS***
1-3/8-18UNEF-2A
54,4
19,0
41,0
31,8
3,1
TBF24-**-**PS***
1-1/2-18UNEF-2A
54,4
20,6
44,5
34,9
3,7
TBF28-**-**PS***
1-3/4-18UNS-2A
54,4
20,6
50,8
39,7
3,7
TBF32-**-**PS***
2-18UNS-2A
54,4
22,2
57,0
44,5
4,4
TBF36-**-**PS***
2-1/4-16UN-2A
54,4
22,2
63,5
49,2
4,4
* For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 10-22 *** Add modification code; see page 8
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ittcannon.com
37
ACCESSORIES
Cable Clamp
These cable clamps can be used with or without bushings. Bushings need to be ordered separetely, please see table below.. It is utilized to complete the F class plugs and
receptacles on page 25, 28, 33 and CA3108 90° plug on page 35.
Part No. CA
Shell size
A
Thread
d1
max
l1
max
l2
max
VG95234KK 4
10S, 12S, 12
5/8-24NEF-2B
7,9
20,8
22,5
VG95234KK 6
14S, 14
3/4-20UNEF-2B
11,1
22,4
27,4
VG95234KK 8
16S, 16
7/8-20UNEF-2B
14,2
24,0
29,8
VG95234KK10
18
1-20UNEF-2B
15,8
24,0
32,2
VG95234KK12
20, 22
1-3/16-18UNEF-2B
19,0
24,0
37,4
VG95234KK16
24, 28
1-7/16-18UNEF-2B
23,7
26,4
43,5
VG95234KK20
32
1-3/4-18NS-2B
31,8
28,0
51,7
VG95234KK24
36
2-18NS-2B
34,6
29,6
57,8
TELESCOPING BUSHING
Telescoping bushings (used with cable clamp) keep dirt, moisture out of backshell. Taping or wrapping wires is eliminated since bushing protects wires going through
clamp. Combination of bushings may be used to decrease cable entry diameter to improve sealing. Material is Polychloroprene.
Shell size
part no.
d1
d2
d3
I
Weight
10SL
012-8552-000
8.0
6.6
9.9
70.0
4
14S
012-8554-000
10.9
9.1
12.7
67.0
5
g
16S, 16
012-0218-000
14.0
11.1
19.0
64.0
6
18
012-0219-000
15.7
14.3
22.0
60.0
4
20, 22
012-0220-000
18.8
15.9
26.9
57.0
7
24, 28
012-8556-000
23.6
21.5
33.3
54.0
13
32
012-8558-000
31.5
26.8
40.4
51.0
26
36
012-0223-000
34.7
31.8
46.8
48.0
30
24.28
012-8555-000
21.2
16.6
26.9
57.0
13
32
012-8557-000
26.5
21.5
33.3
54.0
26
Shell size
Combination of:
24, 28
012-8556-000 and 012-8555-000
32
012-8558-000 and 012-8557-000
36
012-0223-000 and 012-8558-000
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
38
ittcannon.com
ACCESSORIES
METAL PROTECTING CAPS FOR RECEPTACLES WITH CORD
10SL
A66
CA121003-801
Order designation
A232
A240
CA121003-1621 CA121003-1681
A241
CA121003-1721
ØA
Thread
5/8-24UNEF-2B
D
max.
11.7
ØE
max.
20.2
F
ca.
100
ØG
+0,4
3.4
H
max.
16.0
12S
CA121003-802
CA121003-1622
CA121003-1682
CA121003-1722
3/4-20UNEF-2B
11.7
23.4
115
3.4
16.0
14S
CA121003-803
CA121003-1623
CA121003-1683
CA121003-1723
7/8-20UNEF-2B
11.7
26.6
115
3.4
16.0
16S, 16
CA121003-804
CA121003-1624
CA121003-1684
CA121003-1724
1-20UNEF-2B
11.7
29.8
115
3.4
16.0
18
CA121003-806
CA121003-1626
CA121003-1686
CA121003-1726
1 1/8-18UNEF-2B
11.7
32.9
115
3.4
16.0
20
CA121003-807
CA121003-1627
CA121003-1687
CA121003-1727
1 1/4-18UNEF-2B
11.7
36.1
125
3.4
16.0
22
CA121003-808
CA121003-1628
CA121003-1688
CA121003-1728
1 3/8-18UNEF-2B
11.7
39.4
125
3.4
16.0
24
CA121003-809
CA121003-1629
CA121003-1689
CA121003-1729
1 1/2-18UNEF-2B
11.7
42.6
140
4.2
16.0
28
CA121003-810
CA121003-1630
CA121003-1690
CA121003-1730
1 3/4-18UNS-2B
13.3
48.9
200
4.2
18.0
32
CA121003-811
CA121003-1631
CA121003-1691
CA121003-1731
2-18UNS-2B
13.3
55.3
200
4.6
18.0
36
CA121003-812
CA121003-1632
CA121003-1692
CA121003-1732
2 1/4-16UN-2B
13.3
61.6
200
4.6
18.0
Shell
Size
METAL PROTECTING CAPS FOR RECEPTACLES WITH CHAIN
Order designation
Shell
Size
A66
A232
A240
A241
ØA
D
ØE
F
ØG
H
Thread
max.
max.
ca.
+0,4
max.
10SL
CA2209-5101
CA121003-641
CA121003-681
CA121003-721
5/8-24UNEF-2B
11.7
20.2
100
3.4
16.0
12S
CA2209-5102
CA121003-642
CA121003-682
CA121003-722
3/4-20UNEF-2B
11.7
23.4
115
3.4
16.0
14S
CA2209-5103
CA121003-643
CA121003-683
CA121003-723
7/8-20UNEF-2B
11.7
26.6
115
3.4
16.0
16S, 16
CA2209-5104
CA121003-644
CA121003-684
CA121003-724
1-20UNEF-2B
11.7
29.8
115
3.4
16.0
18
CA2209-5105
CA121003-646
CA121003-686
CA121003-725
1 1/8-18UNEF-2B
11.7
32.9
115
3.4
16.0
20
CA2209-5106
CA121003-647
CA121003-687
CA121003-726
1 1/4-18UNEF-2B
11.7
36.1
125
3.4
16.0
22
CA2209-5107
CA121003-648
CA121003-688
CA121003-727
1 3/8-18UNEF-2B
11.7
39.4
125
3.4
16.0
24
CA2209-5108
CA121003-649
CA121003-689
CA121003-728
1 1/2-18UNEF-2B
11.7
42.6
140
4.2
16.0
28
CA2209-5109
CA121003-650
CA121003-690
CA121003-729
1 3/4-18UNS-2B
13.3
48.9
200
4.2
18.0
32
CA2209-5110
CA121003-651
CA121003-691
CA121003-730
2-18UNS-2B
13.3
55.3
200
4.6
18.0
CA2209-5111
CA121003-652
CA121003-692
CA121003-731
2 1/4-16UN-2B
13.3
61.6
200
4.6
18.0
36
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ittcannon.com
39
ACCESSORIES
METAL PROTECTING CAPS FOR PLUGS WITH CORD
Shell
Size
10SL
12S
14S
A66
CA121004-801
CA121004-802
CA121004-803
Order designation
A232
A240
CA121004-1621 CA121004-1681
CA121004-1622 CA121004-1682
CA121004-1623 CA121004-1683
ØA
Thread
5/8-24UNEF-2A
3/4-20UNEF-2A
7/8-20UNEF-2A
A241
CA121004-1721
CA121004-1722
CA121004-1723
C
±0,5
14.1
18.9
18.9
D
max.
16.3
21.0
21.0
ØE
+0,2
11.5
14.4
17.6
ØF
max.
16.7
19.8
23.0
G
ca.
100
115
115
ØH
+0,4
3.8
3.8
3.8
I
max.
20.5
25.0
25.0
16S, 16
CA121004-804
CA121004-1624
CA121004-1684
CA121004-1724
1-20UNEF-2A
18.9
21.0
20.8
26.2
115
3.8
25.0
18
CA121004-806
CA121004-1626
CA121004-1686
CA121004-1726
1 1/8-18UNEF-2A
18.9
21.0
23.9
29.4
115
3.8
25.0
20
CA121004-807
CA121004-1627
CA121004-1687
CA121004-1727
1 1/4-18UNEF-2A
18.9
21.0
27.1
32.5
125
4.6
25.0
22
CA121004-808
CA121004-1628
CA121004-1688
CA121004-1728
1 3/8-18UNEF-2A
18.9
21.0
30.3
35.7
125
4.6
25.0
24
CA121004-809
CA121004-1629
CA121004-1689
CA121004-1729
1 1/2-18UNEF-2A
18.9
21.0
33.5
38.9
140
4.6
25.0
28
CA121004-810
CA121004-1630
CA121004-1690
CA121004-1730
1 3/4-18UNS-2A
18.9
21.0
39.0
45.2
200
4.6
25.0
32
CA121004-811
CA121004-1631
CA121004-1691
CA121004-1731
2-18UNS-2A
18.9
21.0
45.4
51.6
200
5.4
25.0
36
CA121004-812
CA121004-1632
CA121004-1692
CA121004-1732
2 1/4-16UN-2A
18.9
21.0
50.9
57.9
200
5.4
25.0
METAL PROTECTING CAPS FOR PLUGS WITH CHAIN
Shell Size
Order designation
A66
A232
A240
A241
ØA
C
D
ØE
ØF
G
ØH
I
Thread
±0,5
max.
+0,2
max.
ca.
+0,4
max.
10SL
CA17530-5101
CA121004-641
CA121004-681
CA121004-721
5/8-24UNEF-2A
14.1
16.3
11.5
16.7
100
3.8
20.5
12S
CA17530-5102
CA121004-642
CA121004-682
CA121004-722
3/4-20UNEF-2A
18.9
21.0
14.4
19.8
115
3.8
25.0
14S
CA17530-5103
CA121004-643
CA121004-683
CA121004-723
7/8-20UNEF-2A
18.9
21.0
17.6
23.0
115
3.8
25.0
16S, 16
CA17530-5104
CA121004-644
CA121004-684
CA121004-724
1-20UNEF-2A
18.9
21.0
20.8
26.2
115
3.8
25.0
18
CA17530-5105
CA121004-646
CA121004-686
CA121004-726
1 1/8-18UNEF-2A
18.9
21.0
23.9
29.4
115
3.8
25.0
20
CA17530-5106
CA121004-647
CA121004-687
CA121004-727
1 1/4-18UNEF-2A
18.9
21.0
27.1
32.5
125
4.6
25.0
22
CA17530-5107
CA121004-648
CA121004-688
CA121004-728
1 3/8-18UNEF-2A
18.9
21.0
30.3
35.7
125
4.6
25.0
24
CA17530-5108
Ca121004-649
CA121004-689
CA121004-729
1 1/2-18UNEF-2A
18.9
21.0
33.5
38.9
140
4.6
25.0
28
CA17530-5109
CA121004-650
CA121004-690
CA121004-730
1 3/4-18UNS-2A
18.9
21.0
39.0
45.2
200
4.6
25.0
32
CA17530-5110
CA121004-651
CA121004-691
CA121004-731
2-18UNS-2A
18.9
21.0
45.4
51.6
200
5.4
25.0
CA17530-5111
CA121004-652
CA121004-692
CA121004-732
2 1/4-16UN-2A
18.9
21.0
50.9
57.9
200
5.4
25.0
36
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
40
ittcannon.com
ACCESSORIES
PROTECTIVE CAPS PLASTIC*
Material: Polyethene
Color: Red
Part No.
CA
3100/3101/3102
025-0460-000
025-0477-000
CA
3106/3108
10SL
10SL
025-0478-000
12S, 12
025-0462-000
12S, 12
025-0479-000
14S, 14
025-0463-000
14S, 14
025-0480-000
16S, 16
025-0498-000
16S, 16
025-0484-000
18
025-0507-000
18
025-0467-000
20
*Dust caps for the connector mating side only
d1
l1
d2
d3
max. max. ±0,2 max.
21,5 17,8 15,2 16,9
20,4 12,5 14,0 15,7
Part No.
d1
l1
d2
CA
CA
3100/3101/3102 3106/3108 max. max. ±0,2
025-0468-000
20
38,1 17,8 31,5
025-0469-000
22
39,1 14,6 32,6
23,1
14,6
16,8
18,5
025-0486-000
22
41,4
17,8
34,5
36,5
24,7
17,8
18,5
20,2
025-0487-000
24
42,3
14,6
35,5
37,4
44,2
17,8
37,8
39,8
28
48,4
14,6
41,6
43,5
50,4
17,8
43,9
45,9
32
54,8
14,6
48,0
49,9
57,0
17,8
50,3
52,2
36
61,3
14,6
54,2
56,3
63,4
17,8
56,6
58,6
26,3
14,6
19,9
21,6
025-0510-000
27,8
17,8
21,6
23,3
025-0488-000
29,5
14,6
23,1
24,8
025-0501-000
31,5
17,8
25,1
26,8
025-0489-000
32,8
14,6
25,9
27,8
025-0502-000
34,7
17,8
28,2
30,1
025-0490-000
35,4
17,8
28,3
30,2
025-0503-000
WIRE HOLE FILLERS
24
28
32
36
Where contacts are not engaged, the contact cavities are to be closed with wire hole fillers. Wire hole fillers are inserted into the rear end of the grommet
(see CA-B Assembly instruction available on the ITT webpage www.ittcannon.com)
For contact size
AWG
metric
d1
d2
±0,1
±0,2
l1
l2
Part number
Color
±0,1 ±0,3
20
10
2,3
3,0
2,4
9,7
225-1000-000
red
16S
15S
2,8
3,7
1,5
4,8
225-8510-000
nature
16
15
2,8
3,7
3,2
11,9
225-0017-000
blue
12
25
3,7
4,6
3,2
11,9
225-0018-000
yellow
8
60/100
5,0
5,8
3,2
11,9
225-0019-000
white
4
160
7,6
8,5
3,2
11,9
225-8502-000
green
0
500
12,8
13,5
3,2
11,9
225-8503-000
black
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ittcannon.com
d3
max.
33,4
34,2
41
ACCESSORIES
SEALING GASKETS
For front and rear panel mounting. These sealing gaskets made of neoprene are used with flange receptacles for sealing purposes between the shell and the flange.
Part No.
Shell size
d1
+0,2
d2
+0,2
l1
±0,3
e
±0,1
075-8512-000
10SL
15,7
4,2
25,4
18,2
075-8513-000
12S
18,9
4,2
28,0
20,6
075-8514-000
14S
22,1
4,2
30,0
23,0
075-8515-000
16S,16
25,3
4,2
32,5
24,6
075-8516-000
18
28,4
4,2
35,0
27,0
075-8517-000
20
31,6
4,2
38,0
29,4
075-8518-000
22
34,8
4,2
41,0
31,8
075-8519-000
24
38,0
4,2
44,5
34,9
075-8520-000
28
44,3
5,1
50,8
39,7
075-8521-000
32
50,7
5,1
57,0
44,5
075-8522-000
36
57,0
5,1
63,5
49,2
Dummy Receptacle
The dummy receptacle holds 3106 or 3108 plugs when not in use.
Part No. CA
for shell size
A
Thread
l1
max
l2
±0,2
l3
±0,7
d1
+0,2/– 0,1
e
±0,1
248-0089-001
10SL
5/8-24UNEF-2B
17,2
2,4
25,4
3,1
18,2
248-0774-000
12S
3/4-20UNEF-2B
17,2
2,4
28,7
3,1
20,6
248-0093-001
14S
7/8-20UNEF-2B
17,9
2,4
30,1
3,1
23,0
248-0095-001
16S
1-20UNEF-2B
17,2
2,4
32,5
3,1
24,6
248-0094-001
16
1-20UNEF-2B
22,0
2,4
32,5
3,1
24,6
248-0096-001
18
1-1/8-18UNEF-2B
22,5
3,0
34,9
3,1
27,0
248-0772-000
20
1-1/4-18UNEF-2B
22,5
3,0
38,0
3,1
29,4
248-0773-000
22
1-3/8-18UNEF-2B
22,5
3,0
41,3
3,1
31,8
248-0099-001
24
1-1/2-18UNEF-2B
24,1
3,0
44,4
3,7
34,9
248-0100-001
28
1-3/4-18UNS-2B
24,1
3,0
50,8
3,7
39,7
248-0101-001
32
2-18UNS-2B
27,0
4,3
57,1
4,4
44,5
248-0102-001
36
2-1/4-16UN-2B
27,0
4,3
63,4
4,4
49,2
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
42
ittcannon.com
ACCESSORIES
CONTACTS
Standard contacts and contacts with reduced termination diameter
SIZE 15S/16S, 15/16, 25/12, 60/100/8, 160/4, 500/0
SIZE 10/20
Pin contacts Finish: A36 – silver plated and passivated / A176 – gold plated
Termination size
Contact size
10/20
15S /16S
15 /16
25 /12
60/100/8
160/4
500/0
Part no. with finish
d6
d7
AWG
A36
A176
d1
–0,05
d4
mm²
l1
± 0,15
l3
± 0,5
0,5 – 1,0
20 /18
030-8585-000
030-8585-006
1,04
1,50
1,50
0,2 – 0,4
26 /22
030-8585-010
030-8585-016
1,04
1,50
0,90
0,75 – 1,5
18 /16
030-8586-000
030-8586-006
1,60
1,75
0,3 – 0,6
22 /20
330-8744-000
330-8744-006
1,60
1,75
0,14 – 0,38
22 /26
030-8586-010
030-8586-016
1,60
0,75 – 1,5
18 /16
030-8587-000
030-8587-006
1,60
0,3 – 0,6
22 /20
330-8659-000
030-8559-006
0,14 – 0,38
22 /26
030-8587-030
2,0 – 3,0
14 /12
030-8588-000
0,75 – 1,5
18 /16
030-8588-010
4,0
–
030-8588-054
–
8
030-8612-000
2,40
28,4
4,75
–
2,40
28,4
4,75
blue
1,75
2,75
27,4
3,85
–
1,20
2,75
27,4
3,85
red
1,75
0,90
2,75
27,4
3,85
blue
1,75
1,75
2,75
31,4
7,90
–
1,60
1,75
1,20
2,75
31,4
7,90
red
030-8587-036
1,60
1,75
0,90
2,75
31,4
7,90
blue
030-8588-006
2,40
3,30
2,50
3,80
37,0
7,90
–
030-8588-016
2,40
3,30
1,75
3,40
37,0
7,90
black
2,40
3,30
2,80
3,80
37,0
7,90
3,60
6,25
4,55
6,80
39,6
6,0
10
6,35
–
030-8589-000
3,60
6,25
3,50
6,80
39,6
6,35
yellow
030-8612-006
10,0
–
030-8590-000
3,60
6,25
4,80
6,80
39,6
6,35
–
2,0 – 3,0
14 /12
030-8612-010
3,60
6,25
2,50
6,80
39,6
6,35
green
–
4
030-8613-000
5,75
9,55
7,10
9,55
39,6
6,35
–
16,0
–
030-8591-000
5,75
9,55
6,20
9,55
39,6
6,35
–
10,0
–
030-8591-020
5,75
9,55
4,80
9,55
39,6
6,35
–
–
6
030-8613-010
5,75
9,55
5,70
9,55
39,6
6,35
brown
–
0
030-8614-000
9,10
13,55
11,5
14,35
41,0
6,35
–
50,0
–
030-8592-000
9,10
13,55
10,7
14,35
41,0
6,35
–
25,0
4
030-8614-010
9,10
13,55
7,60
14,35
41,0
6,35
white
35,0
2
030-8614-020
9,10
13,55
9,10
14,35
41,0
6,35
grey
16,0
–
030-8614-030
9,10
13,55
6,20
14,35
41,0
6,35
–
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ittcannon.com
Color code
43
ACCESSORIES
CONTACTS
Standard contacts and contacts with reduced termination diameter
SIZE 10/20
SIZE 25/12
SIZE 15S/16S
15/16
SIZE 60/100/8
160/4
500/0
Socket contacts Finish: A36 – silver plated and passivated / A176 – gold plated
Wire size
Contact size
mm²
10/20
15S /16S
15 /16
25 /12
60/100/8
160/4
500/0
Part no. with finish
AWG
A36
d1
A176
d2
+ 0,05
d3
d5
d6
l1
± 0,2
l3
± 0,1
Color code
0,5 –1,0
20/18
031-8554-000
031-8554-006
2,0
1,07
1,5
1,5
2,4
36,8 ± 0,3
4,75
–
0,2 – 0,4
26/22
031-8554-010
031-8554-016
2,0
1,07
1,5
0,9
2,4
36,8 ± 0,3
4,75
blue
0,75 –1,5
18 /16
031-8555-110
031-8555-115
3,2
1,65
1,75
1,75
2,75
29,1
3,9
–
0,3 – 0,6
22/20
031-8688-110
031-8688-115
3,2
1,65
1,75
1,2
2,75
29,1
3,9
red
0,14 – 0,38
22/26
031-8555-130
031-8555-135
3,2
1,65
1,75
0,9
2,75
29,1
3,9
blue
0,75 –1,5
0,3 – 0,6
0,14 – 0,38
18 /16
22/20
22/26
031-8556-110
031-8639-120
031-8556-130
031-8556-115
031-8639-115
031-8556-135
3,2
3,2
3,2
1,65
1,65
1,65
1,75
1,75
1,75
1,75
1,2
0,9
2,75
2,75
2,75
37,8
37,8
37,8
7,9
7,9
7,9
–
red
blue
2,0 – 3,0
14/12
031-8557-000
031-8557-006
4,8
2,45
3,3
2,5
3,8
37,0
7,9
–
0,75 –1,5
18/16
031-8557-020
031-8557-026
4,8
2,45
3,3
1,75
3,4
37,0
7,9
black
4,0
0,3 – 0,6
–
22/20
031-8557-010
031-8557-040
4,8
4,8
2,45
2,45
3,3
3,3
2,8
1,2
3,8
2,75
37,0
37,0
7,9
7,9
–
–
–
8
031-8519-000
6,0
10
031-8558-000
031-8519-006
6,5
3,65
6,25
4,55
6,8
40,1
6,35
–
6,5
3,65
6,25
3,5
6,8
40,1
6,35
yellow
10,0
–
031-8559-000
6,5
3,65
6,25
4,8
6,8
40,1
6,35
–
2,0 – 3,0
14 /12
031-8519-010
6,5
3,65
6,25
2,5
6,8
40,1
6,35
green
–
4
031-8520-000
8,6
5,8
9,55
7,1
9,55
40,1
6,35
–
16,0
–
031-8560-000
8,6
5,8
9,55
6,2
9,55
40,1
6,35
–
10,0
–
031-8560-020
8,6
5,8
9,55
4,8
9,55
40,1
6,35
–
–
6
031-8520-010
8,6
5,8
9,55
5,7
9,55
40,1
6,35
brown
–
0
031-8521-000
13,2
9,15
13,55
11,5
14,35
41,6
6,35
–
50,0
–
031-8561-000
13,2
9,15
13,55
10,7
14,35
41,6
6,35
–
25,0
4
031-8521-010
13,2
9,15
13,55
7,6
14,35
41,6
6,35
white
35,0
2
031-8521-020
13,2
9,15
13,55
9,1
14,35
41,6
6,35
grey
16,0
–
031-8521-030
13,2
9,15
13,55
6,2
14,35
41,6
6,35
–
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
44
ittcannon.com
CA Layout Overview with standard contact
wire size
Layout No. of
Contact Contact Termination*
Contacts size
-F183, -14
The table below shows all available contact arrangements
(layouts) available for ITT’s CA product line.
-F80, -15
wire size mm²
wire size AWG
2
25/12
2,0-3,0
18/16
18-10
4
25/12
2,0-3,0
14/12
18-11
5
25/12
2,0-3,0
14/12
18-12
6
15/16
0,75-1,5
18/16
18-13
3
25/12
2,0-3,0
14/12
1
60/100/8 10.0
8
2
25/12
2,0-3,0
14/12
5
15/16
0,75-1,5
18/16
See ordering key on page 8 for details. In this case, separate
contacts can be selected according to contact selection tables
on pages 43-44.
18-19
10
15/16
0,75-1,5
18/16
18-20
5
15/16
0,75-1,5
18/16
18-21
3
25/12
2,0-3,0
14/12
18-22
3
15/16
0,75-1,5
18/16
*The numbers represent modifications for contact termination as
listed on page 8. E.g. CA3106E20-29S-14 is the modification
for a shielded endbell with metric crimp contacts.
20-2
1
500/0
50.0
0
20-3
3
25/12
2,0-3,0
14/12
20-4
4
25/12
2,0-3,0
14/12
20-6
3
15/16
0,75-1,5
18/16
20-7
8
15/16
0,75-1,5
18/16
20-8
4
15/16
0,75-1,5
18/16
2
60/100/8 10.0
8
For each layout the crimp contact styles and wire cross sections
used as default are shown.
If other crimp sizes are required the connector can be ordered
with suffix “-F0” (without contacts).
Layout No. of
Contact Contact Termination*
Contacts size
-F183, -14
wire size mm²
10SL-3
3
15S/16S 0,75-1,5
-F80, -15
wire size AWG
20-11
13
15/16
0,75-1,5
18/16
18/16
20-14
3
25/12
2,0-3,0
14/12
2
60/100/8 10.0
8
20-15
7
25/12
2,0-3,0
14/12
20-16
2
25/12
2,0-3,0
14/12
7
15/16
0,75-1,5
18/16
5
25/12
2,0-3,0
14/12
1
15/16
0,75-1,5
18/16
3
25/12
2,0-3,0
14/12
6
15/16
0,75-1,5
18/16
20-19
3
60/100/8 10.0
8
20-22
3
15/16
18/16
3
60/100/8 10.0
8
20-23
2
60/100/8 10.0
8
20-24
2
15/16
18/16
2
60/100/8 10.0
8
20-27
14
15/16
0,75-1,5
18/16
20-29
17
15/16
0,75-1,5
18/16
20-33
11
15/16
0,75-1,5
18/16
20A9
9
25/12
2,0-3,0
14/12
20A24
24
15/16
0,75-1,5
18/16
20A48
19
15/16
0,75-1,5
18/16
22-1
2
60/100/8 10.0
8
22-2
3
60/100/8 10.0
8
22-4
2
25/12
14/12
2
60/100/8 10.0
8
2
25/12
2,0-3,0
14/12
4
15/16
0,75-1,5
18/16
10SL-4
2
15S/16S 0,75-1,5
18/16
12S-3
2
15S/16S 0,75-1,5
18/16
12S-4
1
15S/16S 0,75-1,5
18/16
12SA10 4
15S/16S 0,75-1,5
18/16
14S-1
15S/16S 0,75-1,5
18/16
3
18-17
20-17
14S-2
4
15S/16S 0,75-1,5
18/16
14S-4
1
15S/16S 0,75-1,5
18/16
14S-5
5
15S/16S 0,75-1,5
18/16
14S-6
6
15S/16S 0,75-1,5
18/16
14S-7
3
15S/16S 0,75-1,5
18/16
14S-9
2
15S/16S 0,75-1,5
18/16
14SA7
7
15S/16S 0,75-1,5
18/16
16S-1
7
15S/16S 0,75-1,5
18/16
16S-4
2
15S/16S 0,75-1,5
18/16
16S-5
3
15S/16S 0,75-1,5
18/16
16S-8
5
15S/16S 0,75-1,5
18/16
16-7
2
15/16
18/16
1
60/100/8 10.0
8
2
15/16
0,75-1,5
18/16
2
25/12
2,0-3,0
14/12
16-10
3
25/12
2,0-3,0
14/12
16-11
2
25/12
2,0-3,0
14/12
16-12
1
160/4
16.0
4
16A11
2
25/12
2,0-3,0
14/12
18-1
10
15/16
0,75-1,5
18/16
18-3
2
25/12
2,0-3,0
14/12
22-7
1
500/0
50.0
0
18-4
4
15/16
0,75-1,5
18/16
22-8
2
25/12
2,0-3,0
14/12
18-5
2
25/12
2,0-3,0
14/12
22-9
3
25/12
2,0-3,0
14/12
1
15/16
0,75-1,5
18/16
22-10
4
15/16
0,75-1,5
18/16
18-6
1
160/4
16.0
4
22-12
2
60/100/8 10.0
8
18-7
1
60/100/8 10.0
8
3
15/16
0,75-1,5
18/16
18-8
1
25/12
2,0-3,0
14/12
22-14
19
15/16
0,75-1,5
18/16
7
15/16
0,75-1,5
18/16
22-15
5
25/12
2,0-3,0
14/12
5
15/16
0,75-1,5
18/16
1
15/16
0,75-1,5
18/16
16-9
18-9
0,75-1,5
20-18
22-5
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ittcannon.com
45
0,75-1,5
0,75-1,5
2,0-3,0
Layout No. of
Contact Contact Termination*
Contacts size
-F183, -14
wire size mm²
wire size AWG
2,0-3,0
14/12
22-16
3
6
15/16
0,75-1,5
18/16
22-19
14
15/16
0,75-1,5
18/16
22-20
9
15/16
0,75-1,5
18/16
22-21
2
15/16
0,75-1,5
18/16
1
500/0
50.0
0
22-22
4
60/100/8 10.0
8
22-23
8
25/12
14/12
22-27
1
60/100/8 10.0
8
8
15/16
0,75-1,5
18/16
22-28
7
25/12
2,0-3,0
14/12
24-2
7
25/12
2,0-3,0
24-4
1
500/0
3
24-5
-F80, -15
wire size mm²
wire size AWG
3
15/16
0,75-1,5
18/16
28-51
12
25/12
2,0-3,0
14/12
28A16
4
160/4
16.0
4
5
15/16
0,75-1,5
18/16
28A51
43
15/16
0,75-1,5
18/16
28A63
19
15/16
0,75-1,5
18/16
9
25/12
2,0-3,0
14/12
3
25/12
2,0-3,0
14/12
2
500/0
50.0
0
32-5
2
500/0
50.0
0
32-6
16
15/16
0,75-1,5
18/16
14/12
2
25/12
2,0-3,0
14/12
50.0
0
3
60/100/8 10.0
8
15/16
0,75-1,5
18/16
2
160/4
16.0
4
16
15/16
0,75-1,5
18/16
28
15/16
0,75-1,5
18/16
24-6
8
25/12
2,0-3,0
14/12
7
25/12
2,0-3,0
14/12
24-7
2
25/12
2,0-3,0
14/12
6
25/12
2,0-3,0
14/12
14
15/16
0,75-1,5
18/16
24
15/16
0,75-1,5
18/16
24-9
2
160/4
16.0
4
12
15/16
0,75-1,5
18/16
24-10
7
60/100/8 10.0
8
2
160/4
16
4
24-11
6
25/12
14/12
5
25/12
2,0-3,0
14/12
3
60/100/8 10.0
-
18
15/16
0,75-1,5
18/16
3
25/12
2,0-3,0
14/12
6
25/12
2,0-3,0
14/12
2
160/4
16.0
4
2
500/0
50.0
0
24-19
12
15/16
0,75-1,5
18/16
32-17
4
160/4
16.0
4
24-20
2
25/12
2,0-3,0
14/12
32A10
54
15/16
0,75-1,5
18/16
9
15/16
0,75-0,5
18/16
32A47
47
15/16
0,75-1,5
18/16
24-22
4
60/100/8 10.0
8
32A55
55
15/16
0,75-1,5
18/16
24-27
7
15/16
0,75-1,5
18/16
32A69
41
10/20
0,5-1,0
20/18
24-28
24
15/16
0,75-1,5
18/16
20
15/16
0,75-1,5
18/16
24A24
12
25/12
2,0-3,0
14/12
3
500/0
50.0
0
24A28
28
15/16
0,75-1,5
18/16
3
25/12
2,0-3,0
14/12
24A51
13
15/16
0,75-1,5
18/16
36-5
4
500/0
50.0
0
5
25/12
2,0-3,0
14/12
36-6
4
160/4
16.0
4
1
60/100/8 10.0
8
2
500/0
50.0
0
12
15/16
0,75-1,5
18/16
7
25/12
2,0-3,0
14/12
2
25/12
2,0-3,0
14/12
40
15/16
0,75-1,5
18/16
2
15/16
0,75-1,5
18/16
1
25/12
2,0-3,0
14/12
46
15/16
0,75-1,5
18/16
14
15/16
0,75-1,5
18/16
2,0-3,0
14/12
24-12
28-2
28-5
25/12
Layout No. of
Contact Contact Termination*
Contacts size
-F183, -14
-F80, -15
2,0-3,0
2,0-3,0
32-1
32-7
32-8
32-9
32-13
32-15
36-3
36-7
36-8
2
160/4
16.0
4
1
25/12
2,0-3,0
14/12
28-9
6
15/16
0,75-1,5
18/16
14
25/12
6
25/12
2,0-3,0
14/12
2
60/100/8 10.0
8
28-10
2
160/4
16.0
4
1
160/4
16.0
4
2
60/100/8 10.0
8
36-10
48
15/16
0,75-1,5
18/16
3
25/12
2,0-3,0
14/12
36-14
5
60/100/8 10.0
8
18
15/16
0,75-1,5
18/16
5
25/12
2,0-3,0
14/12
4
25/12
2,0-3,0
14/12
6
15/16
0,75-1,5
18/16
28-12
26
15/16
0,75-1,5
18/16
36-15
35
15/16
0,75-1,5
18/16
28-15
35
15/16
0,75-1,5
18/16
36A34
52
15/16
0,75-1,5
18/16
28-16
20
15/16
0,75-1,5
18/16
36A35
4
15/16
0,75-1,5
18/16
28-20
4
15/16
0,75-1,5
18/16
4
500/0
50.0
0
2,0-3,0
14/12
28-11
36-9
10
25/12
2,0-3,0
14/12
36A46
27
25/12
28-21
37
15/16
0,75-1,5
18/16
36A98
8
60/100/8 10
8
28-22
3
160/4
16.0
4
31
15/16
0,75-1,5
18/16
15
15/16
0,75-1,5
18/16
50
10/20
0,2-0,4
26/22
36A99
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
46
ittcannon.com
Tools
Crimp Tools
For pin and socket contacts according VG95234 and for Cannon contacts with reduced coupling dimensions.
Contact Size
Wire size mm2
AWG
10
0,5-1,0
20/18
0,2-0,4
26/22
0,75-1,5
18/16
0,3-0,6
22/20
0,14-0,38
22/26
0,750-1,5
18/16
0,3-0,6
22/20
0,14-0,38
22/26
0,75-1,5
18/16
0,3-0,6
22/20
0,14-0,38
22/26
2,0-3,0
14/12
0,75-1,5
18/16
4
Contact Size
Wire size mm2
AWG
60/100/8
6
2,0-3,0
8
10
14/12
160/4
16
10
4
6
500/0
50
25
35
16
0
4
2
-
Socket
Pin
15S/16S
15S/16S
15/16
25/12
Hand Crimp Tools
M22520-1-01
Order Reference
Crimp Locator
Order Reference
600325
121586-0034
TH 452
995-0002-052
995-0001-585
Hydraulic
Handpump
Order Number
Electro Hydraulic
Tool
Order Number
HPW400U-ITT
121586-5257
HP400EL-ITT
121586-5253
Insertion & Extraction Tools
Crimp contacts should be inserted or, if needed, extracted with the correct tools. In order to avoid damage to the insulator it is
recommended to use guide pins for the insertion of socket contacts.
Insertion Tools
Part No.
Order Reference
Insertion Pliers
Part No.
Order Reference
Extraction Tools
Part No.
Order Reference
CIT 20
121086-3009
CIT-F80-20
121086-0098
CET-F80-20
121086-0082
CIT 16
121086-3008
CIT-F80-16
121086-0097
CET-F80-16
121086-0081
27977-16T50
CIT 12
121086-3007
CIT-F80-12
121086-0096
CET-F80-12
121086-0080
27977-12T8
CIT 8
121086-0095
CET-8
121086-0079
CIT 4
121086-0094
CET-4
121086-0078
CIT 0
121086-0093
CET-0
121086-0077
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ittcannon.com
47
Guiding Pins for
Socket Contacts
Basic - Hydraulic - Electrically driven tool - Version A
Basic - Hydraulic - Manual Operated tool - Version B
Pump Handle with
Reset Function
H- Crimp
Head
H- Crimp Head
Electro Hydraulic
Crimp Tool
Handle
Foot Pedal
Basic – Manual operated crimp tool – Version C
Version
Description
Marking
Part Number
A
Electro-Hydraulic Crimp tool set with foot pedal, hand control and crimp head
HP700EL-ITT
121586-5279
A (Accessory)
Switch mode power supply
SNT4-ITT
121586-5280
A (Accessory)
Lithium Ion Battery 18V 3A with recharger
LGA4-ITT
121586-5281
B
Manually operated Hydraulic handtool
HPW400U-ITT
121586-5257
C
Hand Crimp Tool
M22520-1-01
995-0001-585
Crimp tool and Bench mount
Foot pedal
Gauge
Description
Marking
Part Number
Pneumatic crimp tool (AWG 12 - 20)
WA27F-CE
121586-5067
Bench mount
BM-2
121586-5068
Foot pedal
WA10
121586-5069
Gauge
M22520-3-1
995-0001-684
Crimp Dies
Product
Crimp die
Locator
Contact Size
Part Number
Hex. Diameter
Stamped label
Cable Size
AWG
60/100/8
121586-5231
5,20
01
8
6/10
160/4
121586-5230
7,25
02
4
16
500/0
121586-5229
11,40
03
0
50
MS / CA
121586-5232
mm2
Notes
1. For insertion and extraction of the contacts and for connector
assembly see Assembly instructions CAS25094
2. Standard contacts acc. to VG95234
Crimp die with locator
Crimp die
Locator
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
48
ittcannon.com
Product Safety Information
This note must be read in conjunction with the
Product data sheet / catalog. Failure to observe the
advice in this information sheet and the operating
conditions specified in the product data sheet /
catalog could result in hazardous situations.
1. MATERIAL CONTENT AND PHYSICAL FORM
Electrical connectors do not usually contain hazardous materials.
They contain conducting and non-conducting materials and can be
divided into two groups:
a) Printed circuit types and low-cost audio types which employ all
plastic insulators and casings;
b) Rugged, Fire Barrier and High Reliability types with metal casings
and either natural rubber, synthetic rubber, plastic, or glass insulating
materials.
Contact materials vary with type of connector and application and
are usually manufactured from either copper, copper alloys, nickel,
alumel, chromel or steel. In special applications, other alloys may
be used.
shock could result from touching exposed contacts on an unmated
connector. Voltages more than 30 V ac or 42.5 V dc are potentially
hazardous, and care should be taken to ensure that such voltages
cannot be transmitted in any way to exposed metal parts of the
connector body. The connector and wiring should be checked before
making live to ensure that there is no damage to metal parts or
insulators, no solder blobs, loose strands, conducting lubricants,
swarf, or any other undesired conducting particles. Circuit resistance
and continuity check should be made to make certain that there are
no high resistance joints or spurious conducting paths. Always use
the correct application tools as specified in the data sheets/
catalogues. Do not permit untrained personnel to wire, assemble or
tamper with connectors. For operation voltage please see appropriate
regulations for the applicable region/country.
6. IMPORTANT GENERAL INFORMATION
(i) Air and creepage paths/Operating voltage. The admissible
operating voltages depend on the individual applications and the
applicable safety regulations (including, but not limited to, region/
country-specific regulations). For this reason, the air and creepage
path data are only reference values. A reduction of air and creepage
paths due to PC board and/or harnessing is normal.
(ii) Temperature. All information given are temperature limits. The
operation temperature depends on the individual application.
2. FIRE CHARACTERISTICS AND ELECTRIC SHOCK HAZARD
There is no fire hazard when the connector is correctly wired and
used within the specified parameters. Incorrect wiring or assembly
of the connector or careless use of metal tools or conductive fluids,
or transit damage to any of the component parts may cause electric
shock or burns. Live circuits must not be broken by separating mated
connectors as this may cause arcing, ionization and burning. Heat
dissipation is greater at maximum resistance in a circuit. Hot spots
may occur when resistance is raised locally by damage (e.g., cracked,
or deformed contacts, broken strands of wire). Local overheating
may also result from the use of the incorrect application tools or
from poor quality soldering or slack screw terminals. Overheating
may occur if the ratings in the product data sheets/catalogues are
exceeded and can cause breakdown of insulation and hence electric
shock. If heating is allowed to continue, it intensifies by further
increasing the local resistance through loss of temper of spring
contacts, formation of oxide film on contacts and wires and leakage
currents through carbonization of insulation and tracking paths.
Fire can then result in the presence of combustible materials, and
this may release noxious fumes. Overheating may not be visually
apparent. Burns may result from touching overheated components.
3. HANDLING
Care must be taken to avoid damage to any component parts of
electrical connectors during installation and use. Although there are
normally no sharp edges, care must be taken when handling certain
components to avoid injury to fingers. Electrical connectors may be
damaged in transit to the customers, and damage may result in
creation of hazards. Products should therefore be examined prior
to installation/use and rejected if found to be damaged.
4. DISPOSAL
Incineration of certain materials may release noxious or even toxic
fumes.
5. APPLICATION
Connectors with exposed contacts should not be selected for use
on the current supply side of an electrical circuit because an electric
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ittcannon.com
49
(iii) Other important information. ITT continuously endeavors to
improve its products. Therefore, the products may deviate from the
description, technical data and shape as shown in this catalogue
and/or data sheets.
7. MISCELLANEOUS
“Cannon” and “Veam” are brands of ITT, Inc. (“ITT”). ITT’s connector
products are intended to be used in accordance with the specifications
in this publication (and any other relevant publications that are
applicable to the specific product). Any use or application that
deviates from the stated operating specifications is not recommended
and may be unsafe. No information and data contained in this
publication shall be construed to create any liability on the part of
ITT or its successors, assigns, officers, directors, employees, affiliates,
and agents, including, but not limited to, any liability for any patent
infringements or other rights of third parties which may result from
its use. Any new issue of this publication shall automatically
invalidate and supersede all previous issues. Reprinting this
publication is generally permitted, provided that ITT’s prior written
consent is obtained, and the source is indicated.
This publication is not to be construed as an offer. It is intended
merely as an invitation to make an offer. Product availability, prices,
and delivery dates are exclusively subject to ITT’s order confirmation
form; the same applies to orders based on development samples
delivered. Please refer to ITT’s Terms and Conditions of Sale located
at www.ittcannon.com for the full text of the terms and conditions
that apply to ITT’s connector products.
Commodities in this catalogue may be controlled for export by the
International Traffic in Arms Regulations (ITAR) and Export
Administration Regulations (EAR) when specifically designed,
modified, or configured for articles controlled by the United States
Government.
Notes
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
50
ittcannon.com
Amazing things
happen when great
things connect
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ittcannon.com
51
Connect with your ITT Cannon representative today
or visit us at ittcannon.com
Connect with the experts
ITT Cannon is a world leader in the design and manufacture of highly
engineered connector solutions for multiple end markets.
Why ITT
ITT is a focused multi-industrial company that designs and manufactures highly engineered critical components and customized technology
solutions. ITT’s Cannon brand is a leading global manufacturer of connector products serving international customers in aerospace, defense, medical,
industrial and transportation end markets. ITT’s Connector business, which also includes the Veam and BIW Connector Systems brand, manufactures
and supplies a variety of connectors and interconnects that make it possible to transfer data, signal and power in an increasingly connected world.
Follow us
Connect with your ITT Cannon representative today or visit us at ittcannon.com
CHINA - Shenzhen City
+86.755.2726.7888
GERMANY - Weinstadt
+49.7151.699.0
ITALY - Lainate
+39.02938721
KOREA
+82.2.702.7111
SHANGHAI
+ 86.21.2231.2222
UK - Basingstoke
+44.1256.347400
FRANCE
+33.1.60.04.93.93
HONG KONG
+852.2732.2720
JAPAN - Kanagawa
+81.462.57.2010
MEXICO - Nogales
+52.631.311.0050
SINGAPORE
+65 66974205
USA - Irvine, CA
+1.800.854.3028
The “ITT Engineered Blocks“ symbol, “ITT”, “Cannon” and “Veam“are registered trademarks of ITT Inc.
Specification and other data are based on information available at the time of printing, and are subject to change without notice.
© 2024 ITT Inc.
ITT Cannon CA TH CAT 05/2024
