S202C21SS02DQE

C&K S Series Slide Switches Features/Benefits • 6 to 15 AMPS • Enclosed housing • PC and Snap-in panel mounting • Reversing option • RoHS compliant Typical Applications • Portable tools • Small appliances • Floor care products Models Available Specifications CONTACT RATING: Q contact material (S1XX, S2XX Models): 6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC (UL/CSA). (S5XX, S6XX Models): 12 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC (UL/CSA). (S7XX, S8XX Models): 15 AMPS @ 125 V AC; 6AMPS @ 250 V AC (UL/CSA). See page J-31 for additional ratings. ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. OPERATING TEMPERATURE: -30ºC to +65ºC STORAGE TEMPERATURE: -30ºC to +85ºC Materials HOUSING: 6/6 nylon (UL94V-2), black. TOP PLATE: 6/6 nylon (UL94V-2), black. ACTUATOR: 6/6 nylon (UL94V-2), black (standard). CONTACTS: Q contact material: Copper, silver plated. See page J-31 for additional contact materials. TERMINALS: Q contact material: Copper, silver plated. See page J-31 for additional contact materials. CONTACT SPRING: Music wire or stainless steel. TERMINAL SEAL: Epoxy. NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. J Slide Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J–28 through J–31. For additional options not shown in catalog, consult Customer Service Center. Switch Function S101 SPST, 6 AMPS S202 (DPDT, 6 AMPS S802 DPDT, 15 AMPS S102 SPDT, 6AMPS S112 SPDT, mom., 6 AMPS S201 DPST, 6 AMPS S602 DPDT, 12 AMPS S701 SPST, 15 AMPS S702 SPDT, 15 AMPS Actuator 03 .335" high 04 .500" high 09 .250" high 12 Screwdriver slot (with marking) 13 Screwdriver slot (without marking) C2 Black cap C3 Red cap C5 Yellow cap Detent 1 With detent 2 Without detent Mounting Style SS Panel with mounting ears MS PC thru-hole S2 Snap-in panel with blacktop plate TS Panel with mounting ears Terminations 03 Solder lug with hole 02 PC Thru-hole 04 PC Thru-hole 07 Quick connect 08 PC Thru-hole WC Wire lead Housing Markings NONE No markings D ON-OFF L ON M ON-OFF N Red rectangle on one end Contact Material Q Silver B Gold G Gold over silver Seal NONE No seal E Epoxy seal Dimensions are shown: Inch (mm) Specifications and dimensions subject to change J–27 www.ittcannon.com C&K S Series Slide Switches SWITCH FUNCTION NO. POLES MODEL NO. AMP RATING SWITCH FUNCTION AVAILABLE MOUNTING STYLES NO. POLES MODEL NO. AMP RATING 6 SWITCH FUNCTION DPST AVAILABLE MOUNTING STYLES MS,SS,TS SCHEMATIC SCHEMATIC S101 S102 SP 6 SPST MM S201 ,SS 6 SPDT MS,SS S202 S112 S701 6 SPDT-MOM. MS,SS DP 6 DPDT MS,SS, TS 15 SPST S1,S2,S3,ST S602 12 DPDT MS,SS, TS J Slide S702 15 SPDT S1,S2,S3,ST S802 15 DPDT S1,S2,S3,ST SPST DPDT Part number shown: S101031SS03Q Part number shown: S202031SS03Q NOTE: and MOM. in table indicates momentary action. All models with all options when ordered with ‘G’ or ‘Q’ contact material. Contacts make on side actuator thrown. ACTUATOR 03 .335" HIGH 04 .500" HIGH 09 .250" HIGH 12 SCREWDRIVER SLOT (WITH MARKING) 13 SCREWDRIVER SLOT (WITHOUT MARKING) NOTE: Standard actuator color is black, other colors available, consult Customer Service Center. Alternate heights are available with ‘03, 04 and 09’ actuators, consult Customer Service Center. Models with S2 mounting style, subtract .090 (2, 29). Actuators ‘12’ and ‘13’ are available with DPST and DPDT models only. White 115-230 markings (std.). Without markings. C2; C3; C5 SNAP-ON CAP OPTION CODE2 C1-CT CAP COLOR BLACK RED YELLOW NOTE: Actuator finish: matte. If no color is specified, black will be supplied. Colored actuator caps may also be ordered separately and user installed, see page J-31. C2 C3 C5 Available with S2 mounting style only. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change J–28 www.ittcannon.com C&K S Series Slide Switches DETENT 1 2 WITH DETENT Standard with all maintained models: S101, S102, S201, S202, S602, S701, S702, and S802. WITHOUT DETENT Standard with all momentary models: S112. MOUNTING STYLE SS PANEL WITH MOUNTING EARS PANEL MOUNTING AVAILABLE WITH: Models: S101, S102, S112, S201, S202 and S602 Terminations: All except 08 Actuators: 03, 04, 09, 12* and 13*. *12 and 13 actuators not available with S1XX models. J Slide S202031SS03Q DPDT MS PC THRU-HOLE AVAILABLE WITH: Models: S101, S102, S112, S201, S202 Terminations: 02, 04 and 08 Actuators: 03, 04, 09, 12* and 13* *12 and 13 actuators available with S201, S202 and S602 models only. PC MOUNTING S202031MS02Q For mounting information, see TERMINATIONS section, page J-30. DPDT S2 SNAP-IN PANEL PANEL MOUNTING S802C21S207Q DPDT PANEL THICKNESS: .020(0,57)–.200(5,08) AVAILABLE WITH: Models: S701, S702, and S802 Terminations: 04, 07, 57 and WC Actuators: C2, C3, C5 and 03 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change J–29 www.ittcannon.com C&K S Series Slide Switches MOUNTING STYLE TS PANEL WITH MOUNTING EARS PANEL MOUNTING S202031TS03Q DPDT J Slide AVAILABLE WITH: Models: S201, S202, and S602 Terminations: All Actuators: 03, 04 and 12. TERMINATIONS 03 SOLDER LUG WITH HOLE 02 PC THRU-HOLE 04 PC THRU-HOLE PC MOUNTING 02 & 04 terminations Recommended with ‘MS’ mounting style only. Recommended with double pole models only. 07 QUICK CONNECT 08 PC THRU-HOLE .113 ± .015 (2,87 ± 0,38) .118 ± .015 (3,00 ± 0,38) WC WIRE LEAD 08 terminations with MS mounting style. .503 ± .015 (12,78 ± 0,38) MS mounting style only. NOTE: All terminals on S1XX, S2XX and S6XX models are .020 (0,51) thick; all terminals on S7XX and S8XX models are .031 (0,79) thick. .140 (3,56) .368 ± .015 (9,35 ± 0,38) 18 AWG wire for S1XX and S2XX models. 16 AWG wire for all other models. Black wire standard, other colors and lengths available, consult Customer Service Center. UL style 1015. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change J–30 www.ittcannon.com C&K S Series Slide Switches TOP PLATE MARKINGS NONE NO MARKINGS D ON-OFF L ON M ON-OFF N RED RECTANGLE ON ONE END NOTE: Top plate markings are available with ‘S2’ mounting style only. The marking color on all top plates with marking options ‘D, L and M’ is white, standard. (except white top plates: marking color is black, standard). The marking color on all top plates with ‘N’ marking option is red, standard. Other marking colors are available, consult Customer Service Center. Note: Orientation of actuator markings and terminals. J Slide CONTACT MATERIAL OPTION CODE RoHS COMPLIANT RoHS COMPLIANT CONTACT MATERIAL RATINGS S1XX, S2XX MODELS: 6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC (UL/CSA). S6XX MODELS: 12 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC (UL/CSA). S7XX, S8XX MODELS: 15 AMPS @ 125 V AC; 6 AMPS @ 250 V AC (UL/CSA). 0.4 VA MAX. @20 V AC OR DC max. S1XX, S2XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC (UL/CSA). S6XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 12 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC (UL/CSA). S7XX, S8XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 15 AMPS @ 125 V AC; 6 AMPS @ 250 V AC (UL/CSA). Q YES YES SILVER 2 POWER B YES YES GOLD 1 LOW LEVEL/DRY CIRCUIT G YES YES GOLD OVER SILVER 3 LOW LEVEL/DRY CIRCUIT OR POWER * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 2 3 CONTACTS & TERMINALS: Copper, with gold plate over nickel plate. CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options). CONTACTS & TERMINALS: Copper, with gold plate over nickel plate over silver plate. NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. All models with all options when ordered with ‘G’ or ‘Q’ contact material. NOTE: ‘G’ contact material is equivalent to both ‘B’ and ‘Q’ contact materials. SEAL NONE NO SEAL E EPOXY SEAL EPOXY .075 MAX. (1,91) AVAILABLE HARDWARE Cap, C2; C3 actuators Cap, 03 actuator PART NO. PART NO. 121160100 WHITE 121160200 BLACK 121160300 RED Material: 6/6 Nylon Finish: Matte 121000101 WHITE 121000102 BLACK 121000103 RED Material: 6/6 Nylon Finish: Gloss NOTE: Other cap colors available, consult Customer Service Center. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change J–31 www.ittcannon.com