ARINC 600 Rack and Panel Connectors
Available Rear Release/Rear Removable Front Release/Front Removable Low Insertion force contacts. Both environmental and non-environmentl versions. Polarizing post that are removable from the mating face. Field replaceble inserts. Up to 150 Size #22 contacts per connector. Crimp, coax, twinax, printed circuit and wire wrappable post style contacts. Uses standard ARINC 600, crimp, insertion/ extraction tooling.
SGA
SGA connectors utilize all the Signal cavity inserts and contacts from the ARINC 600 connector series. It was designed to be used where there are space constraints in which a standard ARINC 600 connector can not be used. ITT Cannon's SGA connector fills the need for a 150 maximum contact connector with a smaller shell design than Shell Size 2 of ARINC 600, and has more contacts available than single gang DPX with 106 Size 22 contacts.
Materials and Finishes
SGA*D Material Shell Insulator Finish Material Material Contacts Finish Termination Grommets/Seals O-Ring Material Material Aluminum alloy Clear chromate over cadmium Thermoplastic Copper alloy Gold Crimp N/A N/A SGA*E Aluminum alloy Clear chromate over cadmium Thermoplastic Copper alloy Gold Crimp Silicone-based Elastomer Silicone-based Elastomer SGA*F Aluminum alloy Clear chromate over cadmium Thermoset Copper alloy Gold P.C/Wrap Post N/A N/A Specifications QQ-A-591/A380 QQ-P-416 N/A QQ-C-533 MIL-G-45204 N/A N/A N/A
How to Order (Refer to ARINC 600 [BKA] pages 13-16 for contact information.)
SGA CONNECTOR SERIES CONNECTOR SERIES SHELL STYLE CLASS CONTACT ARRANGEMENT CONTACT TYPE (PIN OR SOCKET) CONNECTOR MOUNTING MODIFIER POLARIZING POSITION CONTACT MODIFIER 3 F 150 S 00 01 FO
SGA (Single Gang ARINC 600)
SHELL STYLE
3 - Plug (Rack Side) 4 - Receptacle (Box Side)
CLASS
C - Non-environmental with Grommet only, insulators are not potted into the connector shell. D - Non-environmental (rear relase crimp contacts). E - Environmentally sealed (rear release crimp contacts). F - Non-environmental (front release, printed circuit or wire wrap posts). R - EMI/RFI Protected & Environmentally sealed, 0-ring omitted (plug only). (Reference ITTC Phoenix)
CONTACT ARRANGEMENT
(See ARINC 600 (BKA) contact arrangements, pages 9-10)
CONTACT TYPE
P - Pin Contacts S - Socket Contacts
CONNECTOR MOUNTING MODIFIER
Mounting modifiers 00, 03, 06, 14, 15, hole location is .705 basic from connector vertical centerline. 00 - .151 Dia. Mounting holes. 03 - .156 with #4-40 Self-Locking Clinch Nuts (ESNA #22NCFMA2-40) 4 per connector. 06 - .188 Dia. For #6-32 Clinch nuts (ESNA #12NCFMA2-62) 4 per connector. 14 - .137 Dia, Countersunk 82 x .230 Dia., Engaging face of mounting flange. 15 - .137 Dia, Countersunk 82 x .230 Dia., Engaging face of mounting flange. Supplied with slant shield grounding spring.
Mounting modifiers 05, 07, 08, 09, 10, 11, 12, 13, hole location is .650 basic from connector vertical centerline. 05 - .208 Dia. for Floating Eyelet 07 - .212/.204 Slot 4 places. 08 - .120 Dia. Countersunk 82 x .230 Dia., Engaging face of mounting flange. 09 - .120 Dia. Countersunk 82 x .230 Dia., Rear face of mounting flange. 10 - .120 Dia. Countersunk 100 x .230 Dia., Engaging face of mounting flange. 11 - .120 Dia. Countersunk 100 x .230 Dia., Rear face of mounting flange. 12- .137 Dia. Countersunk 82 x .230 Dia., Engaging face of mounting flange. 13- .137 Dia. Countersunk 82 x .230 Dia., Rear face of mounting flange.
POLARIZING POSITION
CONTACT MODIFIER
01 - 36 Positions. (See Chart page 24) When the last two digits are omitted, the polarizing posts will not be assembled and position number is not stamped on the connector. This allows the user to position the post and stamp the appropriate number on the shell. If the last two digits are "00", polarizing posts are not supplied with the connector.
Refer to page 13 for replacement contact part numbers and required termination tooling information. (Blank) - With standard Crimp type Rear release contacts. F0 - Contacts are not supplied with connector (FO not stamped on connector.) SA - Front release .025 Dia. x .150 Solder Post Size 22 Sockets SB - Front release .025 Dia. x .250 Solder Post Size 22 Sockets SC - Front release .025 Dia. x .375 Solder Post Size 22 Sockets SD - Front release .025 Dia. x .500 Solder Post Size 22 Sockets WA - Front release .025 Sq. x .250 (1 Wrap) WB - Front release .025 Sq. x .375 (2 Wrap) WC - Front release .025 Sq. x .500 (3 Wrap) WD - Front release .025 Sq. x .641 (3 Wrap)
Dimensions are shown in inches (millimeters). Dimensions subject to change.
www.ittcannon.com
21
ARINC 600 Rack and Panel Connectors
Plug Shell Dimensions
.205 (5.21) .190 (4.83) RAD. 4 Places
SGA
.070 (1.78) .050 (1.27)
1.696 (43.08) 1.676 (42.58)
+ +
+ +
A1 POSITION DESIGNATOR
.470 (11.94) .460 (11.68) 2.335 (59.31) 2.325 (59.06) 2.860 (72.64) 2.840 (72.14) 1.781 (45.24) 1.777 (45.14) .065 (1.65) .062 (1.57) DIA 1.291 (32.79) 1.287 (32.69) .120 (3.05) .098 (2.49) 1.01 (25.65) .99 (25.15) .265 (6.73) .255 (6.48)
.655 (16.64) .620 (15.75) 1.60 (40.64) MAX.
.185 (4.70) .145 (3.68)
.850 (21.59) .830 (21.08)
.26 (6.60) .24 (6.10)
SCREW, .112-40UNC - 2A, 4 PLACES
.130 (3.30) .120 (3.05) FLANGE
+
+
.705* (17.91)
.705* (17.91)
+
.760* (19.30) .760* (19.30)
+
*APPLIES TO INSERT RETAINING SCREW LOCATION
Recommended Panel Cutout
.06 (1.52) RAD. 4 PLACES .10 (2.54) X .10 (2.54) 4 PLACES .156 (3.96( _ .001 (0.03) DIA. 4 HOLES + FOR PRESSED NO. 4 CAPTIVE NUT OR .140 O (3.56) DIA. FOR LOOSE HARWARE /
.06 (1.52) RAD. 4 PLACES
.705 (17.91)* 1.050 (26.67) 1.030 (33.02) .705 (17.91)* 1.760 (44.70) 1.740 (44.20)
1.910 (48.51) 1.890 (48.01) 1.165 (29.59) 3.010 (2.990) 1.165 (29.59)
*.705 APPLIES FOR 00, 03, 06, 14, 15 MOUNTING MODIFICATIONS *.650 APPLIES FOR 05, 07, 08, 09, 10, 11, 12, & 13 MOUNTING MODIFICATIONS
Dimensions are shown in inches (millimeters). Dimensions subject to change.
www.ittcannon.com
22
ARINC 600 Rack and Panel Connectors
Receptacle Shell Dimensions
SCREW, FLH, #4-4OUNC-2A 4 PLACES .650 _ .010 + (16.51 _ 0.25) +
SGA
.130 (3.30) .120 (3.05)
+
+
.705* (17.91) 1.01 (25.65) .99 (25.15) 1.657 _ .010 + (42.09 _ 0.25) +
.705* (17.91)
+
.760* (19.30) .760* (19.30)
+
*APPLIES TO INSERT RETAINING SCREW LOCATION .125 (3.18) MAX POLARIZATION KEY EXTENSION .26 (6.60) 24 (6.10)
1.784 _ .010 + (45.31 _ 0.25) + 1.972 _ .010 + (50.09 _ 0.25) +
.088 (2.24) .068 (1.73) 1.531 (38.89) MAX. .692 (17.58) .668 (16.97)
.390 (9.91) .360 (9.14)
.061 (1.55) .059 (1.50) 1.791 (45.49) 1.787 (45.39) 1.98 (50.29) 1.96 (49.78)
.065 (16.51) .055 (13.97) .089 (2.26) X 45 .067 (1.79) ALL AROUND
.040 (1.02) - .065 (1.68) X 45 , ALL AROUND
1.301 (33.05) 1.297 (32.94) 1.49 (37.85) 1.47 (37.34)
.070 (1.78) .050 (1.27) RAD. 4 PLACES
+
1.696 (43.08) 1.676 (42.57)
+
SCREW, FLH, #4-4OUNC-2A 4 PLACES
+
.470 (11.94) .460 (11.68) 2.335 (59.31) 2.325 (59.06) 2.860 (72.64) 2.840 (72.14)
+
A1 POSITION DESIGNATOR .08 (2.03) X 45 _ 2 + 2 PLACES
.270 (6.86) .250 (6.35)
Recommended Panel Cutout
.310 (7.87) RAD. MAX. 2 PLACES .050 (1.27) RAD. MAX. 4 PLACES .205 (5.21) RAD. MAX 4 PLACES .156 _ .005 + (3.96) _ 0.13) + DIA. 4 PLACES
.705* (17.91) .950 (24.13) .920 (23.37) .705* (17.91) 1.560 (39.62) 1.540 (39.12)
2.050 (52.07) 2.030 (51.56) .106 (2.69) X 45 _ 2 + 2 PLACES 1.165 (29.59) 2.740 (69.60) 2.720 (69.09) 1.165 (29.59)
*.705 APPLIES FOR 00, 03, 06, 14, 15 MOUNTING MODIFICATIONS *.650 APPLIES FOR 05, 07, 08, 09, 11, 12, & 13 MOUNTING MODIFICATIONS
Dimensions are shown in inches (millimeters). Dimensions subject to change.
www.ittcannon.com
23
ARINC 600 Rack and Panel Connectors
Polarization
TOP FEMALE POLARIZATION KEY TOP FEMALE POLARIZATION POST
SGA
+
+
+
+
CONTACT CAVITY A1
A1
A1
CONTACT CAVITY A1
+
+
RECEPTACLE (BOX SIDE)
+
+
BOTTOM FEMALE POLARIZATION KEY
BOTTOM MALE POLARIZATION POST Plug (Rack Side)
Polarizing Positions
1 2 3 4 5 6
KEY
POST
Key Connector Receptacle Position 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 Top Key 1 3 2 1 6 5 4 3 2 1 6 5 4 3 2 1 6 5 4 3 2 4 6 5 4 3 2 1 6 5 4 3 2 1 6 5 Bottom Key 1 4 4 4 4 4 5 5 5 5 5 5 6 6 6 6 6 6 1 1 1 4 1 1 2 2 2 2 2 2 3 3 3 3 3 3
Post Connector Plug Top Post 4 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 1 5 6 1 2 3 4 5 6 1 2 3 4 5 6 Bottom Post 4 1 1 1 1 1 6 6 6 6 6 6 5 5 5 5 5 5 4 4 4 1 4 4 3 3 3 3 3 3 2 2 2 2 2 2
Dimensions are shown in inches (millimeters). Dimensions subject to change.
www.ittcannon.com
24
