T102P3T9V3BE

C&K T Series Subminiature Toggle Switches Features/Benefits • Compact size—small footprint • Single and double pole models • PC and panel mount options available • RoHS compliant models available Typical Applications • Hand-held telecommunications • Instrumentation • Medical equipment Models Available Specifications CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or DC max. Q contact material (TX01 models): 3 AMPS @ 120 V AC or 28 V DC. All other models: 2 AMPS @ 120 V AC or 28 V DC. See page G-42 for additional ratings. ELECTRICAL LIFE: TX01 models: 60,000 make-and-break cycles at full load. All other models: 30,000 cycles. CONTACT RESISTANCE: Below 20 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to 85ºC. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). NOTE: Any models supplied with P, R, Q, B or G contact material are RoHS compliant and compatible. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Materials CASE: Glass filled nylon 6/6, flame retardant, heat stabilized or diallyl phthalate (DAP), (UL 94V-0). ACTUATOR: Brass, chrome plated. BUSHING: Brass, nickel plated. HOUSING: Stainless steel. SWITCH SUPPORT: Brass, matte-tin plated. END CONTACTS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Coin silver, silver plated. See above for additional contact materials. CENTER CONTACTS & TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page G-42 for additional contact materials. TERMINAL SEAL: Epoxy. HARDWARE: Nut & Locking Ring: Brass, nickel plated. Lockwasher: Steel, nickel plated. Additional hardware available separately, see Section O. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages G-37 thru G-42. For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods. Switch Function T101 SPDT On-None-On T102 SPDT Off-None-On T103 SPDT On-Off-On T105 SPDT Mom.-Off-Mom. T107 SPDT On-Off-Mom. T201 DPDT On-None-On T205 DPDT Mom.-Off-Mom. Actuator P3 Flatted, anti-rotation, .490" high S .370" high K Locking lever, round tip L1 .620" high M1 .220" high S1 .410" high Bushing H .220" high, threaded, flat H9 .220" high, unthreaded, flat CF Splashproof, .310" high, threaded, flat D9 .260" high, unthreaded, keyway T .310" high, threaded, flat T9 .310" high, unthreaded, flat TD .260" high, threaded, keyway TK .310" high, threaded, keyway Y .220" high, threaded, keyway Y9 .220" high, unthreaded, keyway Terminations A Right angle, PC thru-hole AV Vertical right angle, PC thru-hole C PC Thru-hole V3 Vertical mount V-bracket Z Solder lug W Wire wrap Contact Material B Gold K Gold, tin-lead P Gold, matte tin Q Silver G Gold over silver L Gold over silver, tin-lead R Gold over silver, matte-tin Seal E Epoxy G Toggle Dimensions are shown: Inch (mm) Specifications and dimensions subject to change G–37 www.ittcannon.com C&K T Series Subminiature Toggle Switches SWITCH FUNCTION SWITCH FUNCTION POS. 1 POS. 2 POS. 3 POS. 1 CONNECTED TERMINALS POS. 2 POS. 3 NO. POLES MODEL NO. C&K marking on opposite side ON ON MOM. ON OFF NONE OFF OFF OFF NONE ON ON MOM. MOM. ON C&K marking on opposite side 2-3 N/A 2-1 SCHEMATIC T101 T103 T105 SP 2-3 OPEN 2-1 SPDT T107 T102 OPEN N/A 3-1 SPST SPDT Part number shown: T101SHZQE DP T201 T205 ON MOM. NONE OFF ON MOM. 2-3,5-6 2-3,5-6 N/A OPEN 2-1,5-4 2-1,5-4 DPDT DPDT Terminal Nos. For Reference Only Part number shown: T201SHZQE MOM. = Momentary All models with all options when ordered with G, L, R or Q contact material. G Toggle Dimensions are shown: Inch (mm) Specifications and dimensions subject to change G–38 www.ittcannon.com C&K T Series Subminiature Toggle Switches ACTUATOR S .370" HIGH M1 .220" HIGH (with “T” bushing) S1 .410" HIGH (with “T” bushing) 1 2 2 Standard with Z, C or W terminations. L1 .620" HIGH P3 ANTI-ROTATION, FLATTED, .450" HIGH 1 2 Actuator shown with standard H bushing. Subtract .040 (1,02) for TD and D9 bushings, subtract .090 (2,29) for T, T9, TK, K9 & CF bushings. Actuators shown with T, T9, TK & CF bushings, add .050 (1,27) for TD and D9 bushings, add .090 (2,29) for H, H9, Y & Y9 bushings. All actuators have chrome finish (except K). 2 Available with T & T9 bushings only. Dress nut part number 709901201 supplied standard with threaded bushing. K LOCKING LEVER Locking Positions –01 & –02 Models 2 Position lock –03 & –11 Models 3 Position lock –08 Models 1 Position lock K actuators have natural aluminum finish. Keyway on right side. To prevent accidental actuation, toggles must be lifted before being actuated. When released, toggles again lock in place. Overtightening mounting nut may cause actuator to bind. Not available with CF bushing option. Bushing option code not required. Not available with TX05 & TX07 models. BUSHING H H9 .220" HIGH THREADED, FLAT .220" HIGH UNTHREADED, FLAT Y Y9 .220" HIGH THREADED, KEYWAY .220" HIGH UNTHREADED, KEYWAY T T9 .310" HIGH THREADED, FLAT .310" HIGH UNTHREADED, FLAT G Toggle H standard with C, W & Z terminations. H9 standard with A, AV & V3 terminations. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change G–39 www.ittcannon.com C&K T Series Subminiature Toggle Switches BUSHING TK .310" HIGH THREADED, KEYWAY TD D9 .260" HIGH THREADED, KEYWAY .260" HIGH UNTHREADED, KEYWAY CF SPLASHPROOF, .310" HIGH THREADED, FLAT IP67 Degree of protection. Internal o-ring actuator seal and external bushing seal washer standard. Not available with K locking lever option. 10-48 BUSHING PANEL MOUNTING 1/4 IN. BUSHING With Standard Locking Ring Without Locking Ring Without Locking Ring Without Locking Ring Without Locking Ring With Small Locking Ring With Standard Locking Ring TERMINATIONS Z SOLDER LUG C SP DP PC THRU-HOLE SP DP PC MOUNTING Not available with K, P, L or R contact materials. T102 – omit center hole. W WIRE WRAP SP DP G Toggle Dimensions are shown: Inch (mm) Specifications and dimensions subject to change G–40 www.ittcannon.com C&K T Series Subminiature Toggle Switches TERMINATIONS A RIGHT ANGLE, PC THRU-HOLE PC MOUNTING Actuator Shown In Pos. 1 Not available with T102 model. T101MH9ABE Horizontal Actuation SPDT PC MOUNTING A RIGHT ANGLE, PC THRU-HOLE T201MH9ABE Horizontal Actuation Actuator Shown In Pos. 1 DPDT AV VERTICAL RIGHT ANGLE, PC THRU-HOLE PC MOUNTING Actuator Shown In Pos. 1 T102 Models: Omit terminal 2 NOTE: Terminal bend radii and lead-in manufacturing option. T101MH9AVBE Vertical Actuation SPDT AV VERTICAL RIGHT ANGLE, PC THRU-HOLE PC MOUNTING Actuator Shown In Pos. 1 T201MH9AVBE Vertical Actuation NOTE: Terminal bend radii and lead-in manufacturing option. DPDT V3 VERTICAL MOUNT, V-BRACKET PC MOUNTING G Toggle Actuator Shown In Pos. 1 T101MH9V3BE T102 Models: Omit center hole. T102 Models: Omit terminal 2 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change SPDT G–41 www.ittcannon.com C&K T Series Subminiature Toggle Switches TERMINATIONS V3 VERTICAL MOUNT, V-BRACKET PC MOUNTING T201MH9V3BE DPDT Actuator Shown In Pos. 1 CONTACT MATERIAL OPTION CODE RoHS RoHS COMPLIANT COMPATIBLE YES NO YES YES YES YES CONTACT MATERIAL TERMINAL PLATING GOLD 1 GOLD 1 TIN-LEAD 6 MATTE-TIN 7 RATINGS LOW LEVEL/ DRY CIRCUIT B K P Q G L R 0.4 VA MAX. @ 20 V AC OR DC MAX. YES YES SILVER 4,5 SILVER 5 POWER TX01 MODELS: 3 AMPS @ 120 V AC OR 28 V DC. ALL OTHER MODELS: 2 AMPS @ 120 V AC OR 28 V DC. YES NO YES YES YES YES GOLD OVER SILVER 2,3 GOLD 3 TIN-LEAD 6 MATTE-TIN 7 LOW LEVEL/DRY CIRCUIT OR POWER TX01 MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR 3 AMPS @ 120 V AC OR 28 V DC. ALL OTHER MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR 2 AMPS @ 120 V AC OR 28 V DC. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 2 3 4 5 6 7 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. END CONTACTS: Coin silver, with gold plate over nickel plate. CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate over nickel plate. END CONTACTS: Coin silver, silver plated. CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. TERMINALS: Copper alloy, with tin-lead alloy over nickel plate. TERMINALS: Copper alloy, with matte-tin over nickel plate. NOTE: Any models supplied with P, R, Q, B or G contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. All models with all options when ordered with R, G, L or Q contact material. B contact material standard with A, AV, V3 & W terminations. Q contact material standard with C & Z terminations. SEAL E EPOXY SEAL G Toggle Dimensions are shown: Inch (mm) Specifications and dimensions subject to change G–42 www.ittcannon.com