T205J1V3KE2

C&K T Series Subminiature Rocker Switches Features/Benefits • Compact size—small footprint • Single and double pole models • PC and panel mounting options available • RoHS compliant Typical Applications • Telecommunications • Instrumentation • Medical Equipment Models Available Specifications CONTACT RATING: Q contact material (TX01 models): 3 AMPS @ 120 V AC or 28 V DC. All other models: 2 AMPS @ 120 V AC or 28 V DC. See page H-53 for additional ratings. ELECTRICAL LIFE: TX01 models: 60,000 make-and-break cycles at full load. All other models: 30,000 cycles. CONTACT RESISTANCE: Below 20 m Ω typ. initial @ 2–4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to 85ºC. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Materials CASE: Glass filled nylon 6/6, flame retardant, heat stabilized or diallyl phthalate (DAP), (UL 94V-0). ACTUATOR: Nylon, black standard. BUSHING: Brass, nickel plated. HOUSING: Stainless steel. SWITCH SUPPORT: Brass, matte-tin plated. MOUNTING BRACKET: Stainless steel. END CONTACTS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Coin silver, silver plated. See page H-53 for additional contact materials. CENTER CONTACTS & TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page H-53 for additional contact materials. TERMINAL SEAL: Epoxy. HARDWARE: Nut, Screws & Lockwasher: Stainless steel. Standoff: Nylon standard. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages H-47 through H-52. For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods. Switch Function T101 SP On-None-On T102 SP Off-None-On T103 SP On-Off-On T105 SP Mom.-Off-Mom. T107 SP On-Off-Mom. T201 DP On-None-On T205 DP Mom.-Off-Mom. Rocker Actuator J1 Rocker, .300" wide J6 Rocker, .230" wide Terminations A Right angle, PC thru-hole AV Vertical Right angle, PC thru-hole Z Solder lug Contact Material V3 V-bracket B Gold K Gold, tin-lead P Gold, matte-tin Q Silver G Gold over silver Seal E Epoxy Actuator Color 2 Black H H–47 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ittcannon.com C&K T Series Subminiature Rocker Switches ACTUATOR COLOR SWITCH FUNCTION SWITCH FUNCTION POS. 1 POS. 2 POS. 3 CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 NO. POLES MODEL NO. C&K marking on opposite side ON ON MOM. ON OFF NONE OFF OFF OFF NONE ON ON 2-3 C&K marking on opposite side N/A SCHEMATIC T101 T103 SP 2-1 OPEN SPDT T105 T107 T102 MOM. MOM. ON OPEN N/A 3-1 SPST SPDT PANEL MOUNTING Part number shown: T101J1ZBE2 Terminal Nos. For Reference Only T201 DP ON NONE ON N/A 2-3,5-6 2-1,5-4 OPEN DPDT T205 MOM. OFF MOM. DPDT PANEL MOUNTING Part number shown: T201J1ZBE2 MOM. = Momentary All models with all options when ordered with G or Q contact material. Terminal Nos. For Reference Only Rocker Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H H–48 www.ittcannon.com C&K T Series Subminiature Rocker Switches ACTUATOR ACTUATOR J1 ROCKER, .300 WIDE OPTION CODE ACTUATOR COLOR BLACK 2 Standard with all models except T10X with A terminations. J6 Actuators available separately, see page H 51H53. Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. ROCKER, .230 WIDE Standard with T10X model with A terminations. TERMINATIONS Z SOLDER LUG SP DP SP and DP Not available with K or P contact material. A RIGHT ANGLE, PC THRU-HOLE PC MOUNTING Rocker T101J6ABE2 Horizontal Actuation SPDT Not available with T102 model. J6 actuator standard only on T10X models with A terminations. H H–49 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ittcannon.com C&K T Series Subminiature Rocker Switches TERMINATIONS A RIGHT ANGLE, PC THRU-HOLE T201J1ABE2 Horizontal Actuation DPDT AV VERTICAL RIGHT ANGLE, PC THRU-HOLE T101J1AVBE2 Vertical Actuation SPDT NOTE: Terminal bend radii and lead-in manufacturing option. AV VERTICAL RIGHT ANGLE, PC THRU-HOLE T201J1AVBE2 Vertical Actuation DPDT NOTE: Terminal bend radii and lead-in manufacturing option. V3 VERTICAL MOUNT, V-BRACKET Rocker T101J1V3BE2 SPDT Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H H–50 www.ittcannon.com C&K T Series Subminiature Rocker Switches TERMINATIONS V3 VERTICAL MOUNT, V-BRACKET T201J1V3BE2 DPDT CONTACT MATERIAL OPTION CODE RoHS RoHS COMPLIANT * COMPATIBLE * YES NO YES YES YES YES YES YES SILVER 4,5 GOLD 3 CONTACT MATERIAL TERMINAL PLATING GOLD 1 TIN-LEAD 6 MATTE-TIN 7 SILVER 5 POWER TX01 MODELS: 3 AMPS @ 120 V AC OR 28 V DC. ALL OTHER MODELS: 2 AMPS @ 120 V AC OR 28 V DC. TX01 MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR 3 AMPS @ 120 V AC OR 28 V DC. ALL OTHER MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR 2 AMPS @ 120 V AC OR 28 V DC. LOW LEVEL/ DRY CIRCUIT 0.4 VA MAX. @ 20 V AC OR DC MAX. RATINGS B K P Q G YES YES GOLD OVER SILVER 2,3 GOLD 3 LOW LEVEL/DRY CIRCUIT OR POWER * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. 2 END CONTACTS: Coin silver, with gold plate over nickel plate. 3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate over nickel plate. 4 END CONTACTS: Coin silver, silver plated. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. 6 TERMINALS: Copper alloy, with tin-lead alloy over nickel plate. 7 TERMINALS: Copper alloy, with matte-tin over nickel plate. NOTE: Any models supplied with Q, B, G & P contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. All models with all options when ordered with G, or Q contact material. B contact material standard with A, AV, V3 terminations. Q contact material standard with C & Z terminations. K & P contact materials not available with Z terminations. SEAL E EPOXY SEAL Rocker H H–51 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ittcannon.com C&K T Series Subminiature Rocker Switches AVAILABLE HARDWARE Panel mounting hardware for rocker and lever handle switches is available separately. Mounting hardware consists of two screws, two nuts, two standoffs and two lockwashers per switch, and is available for panel thicknesses of 1/16, 3/32 and 1/8 inch. See part numbers below. TYPICAL ASSEMBLY SCREW PANEL THICKNESS STAND-OFF LENGTH STAND-OFF LOCKWASHER NUT PART NO. 761101000 761102000 761103000 PANEL THK. 1/16 IN. (1,59) 3/32 IN. (2,38) 1/8 IN. (3,18) STANDOFF LENGTH .295 (7,49) .264 (6,71) .233 (5,92) NOTE: Additional nuts, screws and lockwashers available separately, see Technical Data section of this catalog. J1 Actuator J6 Actuator PART NO. PART NO. 468002263 BLACK Material: Nylon Finish: Matte 468102263 BLACK Material: Nylon Finish: Matte NOTE: Other colors, custom actuator markings and legends available, consult Customer Service Center. Rocker Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H H–52 www.ittcannon.com