T3P22MC1LY

Cannon Trident Connectors Trident High Voltage (THV) Dimensions: Standard Receptacle 28.5 22.8 1.8 SW19 34.8 28.5 22.8 Ø22.2 11.6 Ø3.5 Dimensions: Standard Plug with Endbell Ø28 19.1 SW 21 70.3 SW 22 High Voltage 4-way for Power Contacts • Standard and reversed version available. • Uses APK Power contacts, see page 61. • For sealing the receptacle use panel gasket, see page 47. Shell Size 14 14 14 14 Type Standard Plug with Endbell* Standard Receptacle* Reversed Plug with Endbell** Reversed Receptacle** Contact Layout 04-00 04-00 04-00 04-00 Part Number 192993-0702 192993-0704 192993-0706 192993-0708 Nomenclature THV6U14-0400P1L-02 THV0U14-0400S1L-02 THV6U14-0400S1L-02 THV0U14-0400P1L-02 * Parts are VDE-qualified. ** Parts are not VDE-qualified. High Voltage 4-way Jam Nut Receptacle for Power Contacts Information available upon request. O-RING CONUS RING ENDBELL SEALING SW 21 42.5min CABLE GRIP GLAND NUT SW 22 Shielded Endbell Part Number (Pack of 100) 192993-0087 Dimensions shown in mm Specifications and dimensions subject to change 58 www.ittcannon.com Cannon Trident Connectors Contacts General recommendations for the selection of Trident contacts are listed below. Platings: Tin is recommended for most applications (with 50 or fewer mating cycles). It is cost effective and matches well to most wires. Gold is preferred for special situations. Gold resists oxidation, has high surface conductivity, and has a low coefficient of friction. These features make gold the preferred plating for low level signals (a rule of thumb is