TPA313GPLFS

TPA Series Navigation Tact Switch for SMT Features/Benefits • One touch, 5 way switching • Distinctive tactile feel for scanning • • • • • • Construction and select functions Allows panel sealing Normally open momentary contacts Subminiature overall dimensions Push down to select possible in any position Pegs for better true positioning and improved strength relief RoHS compliant and compatible Electrical MAXIMUM POWER: MAXIMUM VOLTAGE: MAXIMUM CURRENT DC: MINIMUM CURRENT DC: Typical Applications • Electronic devices requiring • • • • • • direct control on LCD display Cellular phones PDA Digital cameras GPS navigation systems Home entertainment systems Security Silver 1 VA 24 V 50 mA 1 mA Gold 0.2 VA 24 V 10 mA 1 mA C Navigation FUNCTION: Multi-directional momentary action CONTACT ARRANGEMENT: Make contact = SP, N.O. TERMINALS: Gullwing type for SMT IP50 Mechanical SHAFT DISPLACEMENT: Orthogonal 4 horizontal directions Vertical Push down TRAVEL TO MAKE: Orthogonal 0.35 mm±0.15 mm Push to select 0.25 mm±0.15 mm OPERATING FORCE: Scanning Orthogonal 1.8 N ± 0.5 N Push to select Vertical 4.0 N ± 0.8 N MAXIMUM APPLIED FORCE: Horizontal 40 N Vertical 20 N LIFE EXPECTANCY: Scanning 200,000 operations in each direction Push to select 200,000 operations DIELECTRIC STRENGTH: 250 Vrms CONTACT RESISTANCE, INITIAL: 200 mΩ INSULATION RESISTANCE (100 VDC): 100 mΩ BOUNCE TIME: < 10 ms Environmental STORAGE TEMPERATURE: Silver Gold –40˚C to +85˚C –40˚C to +85˚C OPERATING TEMPERATURE: –40˚C to +85˚C –40˚C to +85˚C Process Compatible with infrared reflow, lead free soldering and pick and place SMT machines. Note: Specifications listed above are for switches with standard options. For information concerning design integration, please contact your local ITT representative. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. SWITCH T P A 1 G Navigation Select 3 Scanning 2 directions with selection 4 Scanning 4 directions without selection 5 Scanning 4 directions with selection P Pegs Termination G Gullwing Contact Material 1 Silver 3 Gold RoHS compliant and compatible LFS Lead free silver LFG Lead free gold Actuation Force 1 1.8 N scanning, 4 N selection Dimensions are shown: mm (inch) Specifications and dimensions subject to change C–8 www.ittcannon.com TPA Series Navigation Tact Switch for SMT SERIES TPA Actuator rotation center 0,8 (.031) 0,8 (.031) SELECT ø4,0 (.157) R 0,2 (.008) ø3,4 approx. (.134) 7 LEFT 0,55±0,05 (.022±.002) F/D measurement point ( scanning ) D 5,0 (.197) Button snap in sleeve lowest position 1 D 90˚0'±2˚0' 2,7 (.106) 0,4 mini (.016) 1,1 (.043) 2,2 (.087) 0,15 (.006) 2 4 DOWN 5 SELECT 6 RIGHT 3 UP 0,05+0,05/-0,10 (.002+.002/-.004) 0,1 0,65±0,1 (x7) (.026.004) 1,0 (x7) (.039) 9,3 (.366) 5,325 (.2096) 0,1 A 8,05 (.317) UP 2,725 (.1073) R 0,17±0,05 (.007±.002) 70˚0'±5˚0' ø6,0 (.024) 1,7 4,3 (.170) (.067) 2.6 0,5 (.102) (.020) ø1,95±0,03 (.077±.001) 3,1 (.122) 4,3 (.169) SCHEMATIC 1 (.393) LEFT - 7 2,7 (.106) 1,7 (.067) SELECT - 5 RIGHT - 6 COMMON - 2 ø2,0 (.079) UP - 3 4,3 (.169) 5,25 (.207) 2,7 (.106) 2,65 1 (.104) (.393) ø0,9 (.035) 1.4 (.055) RIGHT 3,5 (.138) 2,6 (.102) 5,3 (.209) 2,7 (.106) LEFT RIGHT 1,14±0,02 (.045±.001) C Navigation 5 8±0,0 R 0,1 02) ±.0 (.007 0,52±0,02 (.020±.001) 8 (.315) 0,3 (.017) 1.5 (.059) COMMON - 1 DOWN ø3,2 pick & place area (.126) 0,2 3,5 (.138) DOWN - 4 PCB LAYOUT TPA 511GP WITH PEGS R 0,2 (.008) ø4,0 (.157) ø3,4 approx. (.134) Actuator rotation center 0,55±0,05 (.022.002) 70˚0'±5˚0' 0,8 0,8 (.031) (.031) F/D measurement point ( scanning ) D Button snap in sleeve lowest position 4,3 (.169) 5,0 (.197) 3,1 (.122) ø1,950,03 (.077.001) D R 0,17±0,05 (.007±.002) 90˚0'±2˚0' 2,7 (.106) 2,2 (.087) 0,15 (.006) 0,4 mini 0,5 1,1 (.020) (.043) 0,05+0,05/-0,10 (.002+.002/-.004) 0,1 2,7 (.106) 9,3 (.366) 8,05 (.317) UP 1,5 (.059) 0,650,1 (x7) (.026.004) 1,0 (x7) (.039) ø6,0 ø9,0 (.024) (.035) 0,5 (.020) 2,7 (.106) 1 (.393) ø6,0 (.024) 5,25 (.207) 2,7 (.106) 2,65 1 (.104) (.393) ø0,9 (.035) 1.4 (.055) 1,14±0,02 (.045±.001) 0,52±0,02 (.020±.001) COUPE D-D ECHELLE 20 0,1 A A 2,725 (.1073) 5,325 (.2096) LEFT - 7 7 LEFT 1 4 DOWN 5 SELECT 6 RIGHT 2 2,7 (.106) RIGHT RIGHT - 6 COMMON - 2 ø2,0 (.079) UP - 3 8 (.315) LEFT 3,5 (.138) 2,6 (.102) 4,3 5,3 (.170) (.209) 2,7 (.106) SELECT - 5 1,7 4,3 (.170) (.067) 2.6 0,5 (.102) (.020) 1,7 (.067) 0,3 (.017) 1.5 (.059) 0.2 (.008) 3 UP NOTA : 1 Maximum rotational play of the actuator ±3? 2 Measurement conditions to be defined 3 Shaft diameter at the top : 1,93±0,02 PCB LAYOUT COMMON - 1 ø3,2 pick & place area (.126) 0,2 3,5 (.138) DOWN DOWN - 4 Dimensions are shown: mm (inch) Specifications and dimensions subject to change C–9 www.ittcannon.com www.ittcannon.com 0.2 (.008) 5 8±0,0 R 0,1 02) ±.0 (.007 TPA Series Navigation Tact Switch for SMT NAVIGATION SELECT OPTION CODE ARRANGEMENT Scanning 2 directions with selection Scanning 4 directions without selection Scanning 4 directions with selection 3 4 5 ACTUATION FORCE 1 1.8 N SCANNING, 4 N SELECTION CONTACT MATERIAL C Navigation OPTION CODE MATERIAL SILVER GOLD 1 3 * Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications. TERMINATION G GULLWING 0,15 (.006) 0,650,1 (x7) (.026.004) 9,3 (.366) 2,6 (.102) 1,7 (.067) 4,3 (.169) 2,7 (.106) Dimensions are shown: mm (inch) Specifications and dimensions subject to change C–10 www.ittcannon.com TPA Series Navigation Tact Switch for SMT TAPE & REEL 2±0,05 (.079±.002) 4,0 (.157) 2±0,05 (.079±.002) 12,0 (.472) ø1,5+0,1/-0,0 (.059+.004/-.000) 2 faces 8˚ max. 1,55+0,10/-0,05 (.061+.004/-.002) 0,343±0,05 (.014±.002) 2,5+0,15/-0,10 (.098+.006/-.004) 0,1 B 2,25 (.089) ø1,5+0,25/-0,0 (.059+.010/-.000) 1,75 (.069) 7,5 (.295) 4˚0' max. 10,0 (.394) 8,2 (.323) B 5,3 (.209) 6 faces at 15˚ max 1,2 (.047) 0,1 A 8,4 (.331) A 16±0,3 (.63±0.012) C Navigation Dimensions are shown: mm (inch) Specifications and dimensions subject to change C–11 www.ittcannon.com