V70112S208QE

C&K V Series Power & Line Voltage Select Slide Switches Features/Benefits • Ratings up to 10 AMPS • Snap-in panel and PC mounting • Actuators with screwdriver slot • Quick connect terminals available • RoHS compliant Typical Applications • Appliances Models Available Specifications Materials HOUSING: 6/6 nylon (UL94V-2), black. TOP PLATE: 6/6 nylon (UL94V-2), black. ACTUATOR: Glass filled polyester (UL94V-0), ‘01 and 02’ styles, black (standard); ‘12, 13 and 14’ styles, red (standard). CONTACTS: Copper, silver plated. TERMINALS: Copper, silver plated. CONTACT SPRING: Music wire or stainless steel. TERMINAL SEAL: Epoxy. J Slide CONTACT RATING: 10.1 AMPS @ 125 V AC; 4 AMPS @ 28 V DC; 5 AMPS @ 250 V AC (UL/CSA). 2.0 (0.5) AMPS @ 250 V AC, T85 (VDE). ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, 100 mA. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to +85ºC. NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J–33 through J–35. For additional options not shown in catalog, consult Customer Service Center. Switch Function V802 DPDT V701 SPST V702 SPDT V801 DPST Actuator 12 Screwdriver slot 01 .290" high 02 .290" high with markings 13 Screwdriver slot 14 Screwdriver slot with markings Mounting Style SS Panel with mounting ears MA Right angle, PC thru-hole MS PC Thru-hole S2 Snap-in panel SL Right angle, panel with mounting ears Terminations 05 Quick connect 02 PC thru-hole 08 Right angle PC thru-hole Contact Material Q Silver Seal NONE No seal E Epoxy seal Dimensions are shown: Inch (mm) Specifications and dimensions subject to change J–32 www.ittcannon.com C&K V Series Power & Line Voltage Select Slide Switches SWITCH FUNCTION NO. POLES MODEL NO. SWITCH FUNCTION SPST AVAILABLE MOUNTING STYLES ALL NO. POLES MODEL NO. SWITCH FUNCTION AVAILABLE MOUNTING STYLES SCHEMATIC SCHEMATIC V701 SP V801 DP DPST ALL V702 SPDT ALL V802 All models with all options. Contacts make on side actuator thrown. DPDT ALL ACTUATOR 12 SCREWDRIVER SLOT WITH MARKING J 13 SCREWDRIVER SLOT NO MARKING 01 .290" HIGH 02 .290" HIGH WITH MARKINGS 14 SCREWDRIVER SLOT WITH MARKINGS Slide Actuator color is red with white 115V-230V markings (std.). Actuator color is black. markings are reversed on V702 and V802 models. Actuator color is black with white markings (std.). Actuator color is red. Markings are reversed on V702 and V802 models. Note: Orientation of Actuator color is red with actuator markings and terminals. white markings (std.). MOUNTING STYLE SS PANEL WITH MOUNTING EARS PANEL MOUNTING V80212SS05Q DPDT AVAILABLE WITH: Models: All. Terminations: 02 and 05 MA RIGHT ANGLE, PC THRU-HOLE AVAILABLE WITH: Models: All Terminations: 08 PC MOUNTING PC mount, side actuated. For mounting information, see TERMINATIONS section, page J-35. V80212MA08Q Horizontal Actuation DPDT Dimensions are shown: Inch (mm) Specifications and dimensions subject to change J–33 www.ittcannon.com C&K V Series Power & Line Voltage Select Slide Switches MOUNTING STYLE MS PC THRU-HOLE AVAILABLE WITH: All models with 02 terminations PC MOUNTING PC mount, top actuated. For mounting information, see TERMINATIONS section, page J-35. V80212MS02Q DPDT J Slide SL RIGHT ANGLE PANEL WITH MOUNTING EARS PANEL MOUNTING AVAILABLE WITH: All models with 08 terminations V80213SL08Q Horizontal Actuation DPDT S2 SNAP-IN PANEL MOUNT PANEL MOUNTING .315 (8,00) .050 DIA. TYP. (1,30 ) .346 TYP. (8,80) 1.300 (33,02) ? ? .750 (19,05) .540 (13,72) .650 (16,50) .200 TYP. (5,08) .045 x .045 DEEP (1,14) x (1,14) ACTUATOR TOP FLUSH .110 x .032 TYP. (2,79) x (0,80) .315 (8,00) V80212S205Q Panel thickness: DPDT .245 (6,22) .080 (2,03) AVAILABLE WITH: All models with 02 & 05 terminations Dimensions are shown: Inch (mm) Specifications and dimensions subject to change J–34 www.ittcannon.com C&K V Series Power & Line Voltage Select Slide Switches TERMINATIONS 05 QUICK CONNECT 02 PC THRU-HOLE 08 PC THRU-HOLE Fits .110 in. quick connector. Not available with ‘MS, SS or S2’ mounting styles. J PC MOUNTING PC MOUNTING Slide MS, SS Mounting Styles. MA, SL Mounting Styles. CONTACT MATERIAL OPTION CODE RoHS COMPLIANT RoHS COMPLIANT CONTACT MATERIAL RATINGS Q YES YES SILVER 1 POWER 10.1 AMPS @ 125 V AC; 4 AMPS @ 28 V DC; 5 AMPS @ 250 V AC (UL/CSA); 2.0 (0.5) AMPS @ 250 V AC, T85 (VDE). * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options). All models with all options. V70X and V80X models . NOTE: Any models supplied with Q contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. SEAL NONE NO SEAL E EPOXY SEAL EPOXY .075 MAX. (1,91) Dimensions are shown: Inch (mm) Specifications and dimensions subject to change J–35 www.ittcannon.com