BE134.023AX01

Time and hours meters electronic 2 presets, PNP, NPN or AC logic Display LCD, 6-digits, programmable BE134 Features – Hour counter with 2 presets – Display 6-digits – Totalizer for hour – Counting range 9999.99 s / 999.95.9 min / 9999.59 min / 9999.59 h – With reset – Connection: Count impulse, NPN, PNP, AC logic – Batch counter with preset BE134 with two presets Technical data - electrical ratings Voltage supply 22...50 VAC (50/60 Hz) 85...265 VAC (50/60 Hz) 12...30 VDC 5 VA, 5 W AC: 24 VDC ±20 % / 100 mA DC: 9...28 VDC / 100 mA LCD, 7-segment display, 2-lines, backlit 6-digits 8-digits - totalizer in 2 steps 7 mm (count) 4 mm (preset) Hour counter Main counter with 2 presets Adding or subtracting Batch counter: approx. 20 Hz Time meter and hour counter >10 years in EEPROM Button, electric or automatic Yes, electric (keylock) Optocoupler Normally open or closed, programmable 0.01...99.99 s RS485 Protection class II Overvoltage category II Pollution degree 2 DIN EN 61000-6-4 DIN EN 61000-6-2 Measuring units, sensor logic Control inputs UL/cUL, CE conform Technical data - mechanical design Operating temperature Storing temperature Relative humidity E-connection Core cross-section Protection DIN EN 60529 Operation / keypad Housing type Dimensions W x H x L Installation depth Mounting Cutout dimensions Materials Weight approx. 0...+50 °C -20...+70 °C 80 % non-condensing Plug-in screw terminals 1.5 mm² IP 65 face with seal Membrane with softkeys Built-in housing 48 x 48 x 100 mm 100 mm Clip frame 45 x 45 mm (+0.6) Subject to modification in technic and design. Errors and omissions excepted. 30/10/2008 Power consumption Sensor supply Display Number of digits Digit height Function Count mode Counting frequency Operating mode Data memory Reset Keylock Outputs electronic Outputs relay Output holding time Interface Standard DIN EN 61010-1 Emitted interference Interference immunity Programmable parameters Approvals Housing: Makrolon 6485 (PC) Keypad: Polyester 150 g 1 www.baumerivo.com www.baumerivo.com Time and hours meters electronic 2 presets, PNP, NPN or AC logic Display LCD, 6-digits, programmable BE134 Part number BE134. AX01 Voltage supply 1 22...50 VAC 2 85...265 VAC 3 12...30 VDC Outputs 1 Relay outputs 2 Optocoupler outputs Interface 0 Without interface 1 RS485 Accessories Adaptor plates (page %S) Z 118.033 Z 118.034 Z 118.035 Adaptor plate for screw mount, face 60 x 75 mm Adaptor plate for clip mount, face 53.2 x 53.2 mm Adaptor plate for clip mount, face 60 x 75 mm Block circuit diagram Voltage supply + A (Start) B (Stop) Control input 1 2 3 1 2 7 8 Main counter with presets 3 4 5 6 Batch counter with or without preset P2 Totalizer 12 13 Sensor supply + - Output P1 9 10 11 T,R- 14 T,R+ 15 Interface RS485 Trigger level Comparator inputs Inputs Input level Input level Low Input level High Input resistance Relay outputs Switching voltage max. Switching current max. Switching capacity max. Relay responding time 8 7 Input circuit PNP- / NPN- / AC-logic Programmable 0...2 VDC 3...40 VDC 3 kΩ Output circuit 250 VAC / 110 VDC 1A 150 VA / 30 W 5 ms Output circuit Optocoupler short-circuit proof 25 mA Subject to modification in technic and design. Errors and omissions excepted. Connection diagram Relay outputs 15 14 13 12 11 10 9 8 7 Electronic outputs 15 14 13 12 11 10 9 Electronical outputs Switching voltage max. Switching current max. +24V +24V T,R+ T,R+ T,R- T,R- 40 V 0V 0V B A B 1 RS485 Sensor- Control supply input Signal input RS485 Sensor supply Control input Signal input Supply voltage P2 P1 Outputs max. 265 V terminal - terminal/ P2 P1 Outputs max. 265 V terminal - terminal / - terminal - terminal Dimensions 60.8 48 100 10 1-6 7 44.7 48 Supply voltage 6 5 4 3 2 1 6 5 4 3 2 A 3 2 1 3 2 1 2 www.baumerivo.com 30/10/2008