FE319.550AA9B

FE309, FE319, FE329 COUNTERS CONTROLLERS ENCODERS Electro-mechanical Preselection Counters with One Preset, Manual and Electrical Reset Order designations Standard voltages A3 A5 A8 A9 24 VDC 24 VAC 110 VAC 230 VAC Front dimensions 50 x 50 mm To be plug. in a. lined up within housing FE309.550A FE309 to be plugged in and lined up within housing B With reset button a. electr. reset, 5-digit Front dimensions 60 x 75 mm Fast. of front pl. by means of 2 screws B FE319.550A With reset button a. electr. reset, 5-digit Frontmaß 53.2 x 53.2 mm Fastening by means of clamp. spring FE329.550A B With reset button a. electr. reset, 5-digit Mechanical data Display Preset value display Digit size Reset Counting Housing material Weight Life cycle FE319 with screw fixture Output contact 5-digit, 99 999 During counting process the set preset value is changing Counting: approx. 4.5 mm high, white on black background Preset: approx. 3.5 mm high, yellow on black background Manual push button or electric 1 pulse = 1 dig. added in 2 half-steps Plastic, black front plate Approx. 230 g Counting: approx. 108 pulses Electric reset: approx. 106 pulses The integrated switch is a commercial microswitch with a one-pin changeover contact. Mechanical life cycle: approx. 1 million switch operations, electrical life cycle dependent on load. In the case of an inductive load, spark suppression should be incorporated. Pin assignment 2 5 6 21 20 22 -(+) -(+) +(-) FE329 with clamping fixture +(-) Reset 1 Voltage Voltage End contact count 1 IVO GmbH & Co. P.O. Box 3360 • D-78022 Villingen-Schwenningen Phone +49 (0)7720 942-0 • Fax +49 (0)7720 942-999 www.ivo.de • e-mail: info@ivo.de Printed in Germany 03.01 170.02.168/4 FE309, FE319, FE329 Electrical data Dimensions and cutout sizes Maximum counting speed 20 Imp./s 10 Imp./s FE309 to be plugged in and lined up within housing Cutout 50 x 50 mm 24 VDC ± 10 % 24 VAC ± 10 % 110 VAC ± 10 % 230 VAC +6/-10% Rating 4W 5 VA Min. pulse duration 25 ms 50 ms Min. pulse interval 25 ms 50 ms Load factor at 25 °C 100 % 100 % 8 50 50 Counting Voltage 18.5 24 VAC ± 10 % 110 VAC ± 10 % 230 VAC +6/-10% 22 W 25 VA Min. pulse duration 250 ms 250 ms Min. pulse interval 9 x pulse length 9 x pulse length Load factor at 25 °C 10 % max. 1 min. 10 % max. 1 min. FE319 with screw fixture Cutout 51 x 51 mm 30 E-connection Residual ripple / Frequency 50 Contact load DC: max. 30 W, 230 V, 1 A AC: max. 100 VA, 230 V, 2 A Push-in housing: Solder terminal or terminal contacts on silver-plated tab connectors 0.8 x 2.8 mm Without push-in housing: Contact pins ø 1.5 mm, solder terminal on push-on silver-plated contact lugs DC ≤ 48 % AC 50...60 Hz 8 Countersinking Bf4 DIN74 6 Rating 10 67.4 12.5 24 VDC ± 10 % 75 63 Electric reset Voltage 5 16.5 50 60 61 3 10 FE329 with clamping fixture Cutout 51 x 51 mm 1.6 8 Ambient conditions Protection Operational requirements Classification Interference immunity Emitted interference General rating Overvoltage protection 0...+45 °C -20...+70 °C Max. relative humidity 80 %, at 25 °C, non-condensing IP 41 for front side DIN 40050 To contamination degree 2 EN 61010 Category II EN 50082-2 Severity grade 2 - 3 EN 50081-1 EN 61010 II 1.6 50 53.2 max.6 16.5 61 3 10 2 Subject to modification in technic and design. Errors and omissions excepted. 50 53.2 Ambient temperature Storage temperature Relative humidity