GE333.0724134

Incremental encoders Stainless steel housing, hollow shaft max. ø12 mm Resolution 5...6000 pulses GE333 Features – Encoder with hollow shaft ø12 mm – Stainless steel design – Optical sensing – Resolution max. 6000 ppr – Clamping ring on housing – Temperature range -25...+100°C (5 VDC) GE333 with hollow shaft Technical data - electrical ratings Voltage supply 5 VDC ±10 % 4.75...30 VDC ≤30 mA (24 VDC) ≤60 mA (5 VDC) 5...6000 Zero pulse, width 90° Optical ≤150 kHz A 90° B, N + inverted Linedriver RS422 Push-pull short-circuit proof DIN EN 61000-6-2 DIN EN 61000-6-4 UL approval / E63076 Weight approx. E-connection Technical data - mechanical design Housing Shaft Protection DIN EN 60529 Operating speed Starting torque Rotor moment of inertia Materials Operating temperature Relative humidity Resistance ø58 mm ø12 mm hollow shaft IP 64 ≤6000 rpm ≤0.03 Nm 14.5 gcm² Housing: stainless steel 1.4305 Flange: stainless steel 1.4305 -25...+100 °C (5 VDC) -25...+85 °C (24 VDC) 95 % non-condensing DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms 500 g Cable 1 m Reverse polarity protection Yes (4.75...30 VDC) Consumption w/o load Resolution (steps/turn) Reference signal Sensing method Output frequency Output signals Output circuit Interference immunity Emitted interference Approval 1 www.baumerivo.com www.baumerivo.com 13/11/2008 Subject to modification in technic and design. Errors and omissions excepted. Stainless steel housing, hollow shaft max. ø12 mm Resolution 5...6000 pulses Incremental encoders GE333 Part number GE333. 41 See part number (pulses) E-connection 41 Cable 1 m, radial Voltage supply / signals 22 5 VDC / linedriver RS422 70 4.75...30 VDC / push-pull 72 4.75...30 VDC / linedriver RS422 (5 VDC) Hollow shaft / torque pin 0 Hollow shaft ø12 mm clamping ring on housing with pin 15 mm A Hollow shaft ø12 mm clamping ring on housing without pin Part number (pulses) 49 36 50 39 40 41 (5) (10) (25) (50) (60) (100) 57 06 09 13 14 15 (128) (200) (250) (360) (400) (500) 22 23 24 26 28 30 (1000) (1024) (1250) (1500) (2000) (2500) 31 34 35 48 (3600) (4096) (5000) (6000) Accessories Mounting accessories Z 119.023 Spring coupling for encoders with ø58 mm housing Other pulse numbers upon request. Example: ordering key 23 = 1024 pulses 2 www.baumerivo.com 13/11/2008 Subject to modification in technic and design. Errors and omissions excepted. Incremental encoders Stainless steel housing, hollow shaft max. ø12 mm Resolution 5...6000 pulses GE333 Output signals Clockwise rotating direction when looking at flange. Track A Track A Terminal assignment Core colour Assignment pink blue red black brown green Track B Track B 90° – grey – white Track B inv. UB-Sense Track N (zero pulse) Track N inv. (zero pulse inv.) Track A Track A inv. – Track B – GND-Sense white/green GND Zero pulse Zero pulse brown/green UB UB-Sense and GND-Sense are directly connected to UB resp. GND. Please use cores twisted in pairs (for example track A / track A inv.) for extension cables of more than 10 m length. Trigger level Outputs Output level High Output level Low Load High Load Low Outputs Output level High Output level Low Load High Load Low Linedriver RS422 >2.5 V (I = -20 mA)