GE355.A724157

Incremental encoders Stainless steel housing, shaft with clamping flange Resolution 5...6000 pulses GE355 Features – Encoder with clamping flange – Stainless steel design – Optical sensing – Resolution max. 6000 ppr – Clamping flange with shaft ø10 mm GE355 with clamping flange Technical data - electrical ratings Voltage supply 5 VDC ±10 % 4.75...30 VDC ≤30 mA (24 VDC) ≤60 mA (5 VDC) 5...6000 Zero pulse, width 90° Optical ≤150 kHz A 90° B, N + inverted Linedriver RS422 Push-pull short-circuit proof DIN EN 61000-6-2 DIN EN 61000-6-4 UL approval / E63076 Technical data - mechanical design Housing Shaft Flange Protection DIN EN 60529 Operating speed Starting torque Rotor moment of inertia Admitted shaft load Materials Operating temperature Relative humidity Resistance ø58 mm ø10 mm (clamping flange) Clamping flange IP 67 ≤10000 rpm ≤0.03 Nm IP 67 14.5 gcm² ≤20 N axial ≤40 N radial Housing: stainless steel 1.4305 Flange: stainless steel 1.4305 -25...+85 °C 95 % non-condensing Subject to modification in technic and design. Errors and omissions excepted. 30/10/2008 Reverse polarity protection Yes (4.75...30 VDC) Consumption w/o load Resolution (steps/turn) Reference signal Sensing method Output frequency Output signals Output circuit Interference immunity Emitted interference Approval DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms 500 g Cable 1 m Weight approx. E-connection 1 www.baumerivo.com www.baumerivo.com Stainless steel housing, shaft with clamping flange Resolution 5...6000 pulses Incremental encoders GE355 Part number GE355. A See part number (pulses) E-connection 31 Cable 1 m, axial 41 Cable 1 m, radial Voltage supply / signals 22 5 VDC / linedriver RS422 70 4.75...30 VDC / push-pull 72 4.75...30 VDC / linedriver RS422 (5 VDC) Flange / Shaft A Clamping flange / ø10 mm IP 67 Part number (pulses) 49 36 50 39 40 41 (5) (10) (25) (50) (60) (100) 57 06 09 13 14 15 (128) (200) (250) (360) (400) (500) 22 23 24 26 28 29 (1000) (1024) (1250) (1500) (2000) (2048) 30 31 34 35 48 (2500) (3600) (4096) (5000) (6000) Other pulse numbers upon request. Example: ordering key 23 = 1024 pulses 2 www.baumerivo.com 30/10/2008 Subject to modification in technic and design. Errors and omissions excepted. Incremental encoders Stainless steel housing, shaft with clamping flange Resolution 5...6000 pulses GE355 Output signals Clockwise rotating direction when looking at flange. Track A Track A Terminal assignment Core colour Assignment pink blue red black brown Track B Track B 90° green – grey – white Track B inv. UB-Sense Track N (zero pulse) Track N inv. (zero pulse inv.) Track A Track A inv. – Track B – GND-Sense white/green GND Zero pulse Zero pulse brown/green UB UB-Sense and GND-Sense are directly connected to UB resp. GND. Please use cores twisted in pairs (for example track A / track A inv.) for extension cables of more than 10 m length Trigger level Outputs Output level High Output level Low Load High Load Low Outputs Output level High Output level Low Load High Load Low Linedriver RS422 >2.5 V (I = -20 mA)