GI330.A22C313

厂商：
IVO(堡盟)
封装：
描述：
GI330.A22C313 - Incremental encoders - Baumer IVO GmbH & Co. KG

数据手册：

下载GI330.A22C313.pdf

立即购买

详情介绍
数据手册
价格&库存

GI330.A22C313 数据手册

Incremental encoders End shaft up to ø12 mm Resolution 5...6000 pulses GI330, GI332 Features – Encoder with end shaft ø12 mm – Optical sensing – Resolution max. 6000 ppr – Center mounting or by clamping ring – Cost-efficient mounting GI330 with end shaft Technical data - electrical ratings Voltage supply 5 VDC ±10 % 4.75...30 VDC ≤30 mA (24 VDC) ≤60 mA (5 VDC) 5...6000 Zero pulse, width 90° Optical ≤150 kHz A 90° B, N + inverted Linedriver RS422 Push-pull short-circuit proof DIN EN 61000-6-2 DIN EN 61000-6-4 UL approval / E63076 Weight approx. E-connection Technical data - mechanical design Housing Shaft Protection DIN EN 60529 Operating speed Starting torque Rotor moment of inertia Materials Operating temperature Relative humidity Resistance ø58 mm ø12 mm end shaft IP 54 ≤6000 rpm ≤0.03 Nm 14.5 gcm² Housing: aluminium Flange: aluminium -25...+100 °C (5 VDC) -25...+85 °C (24 VDC) 95 % non-condensing DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms 250 g Connector or cable Reverse polarity protection Yes (4.75...30 VDC) Consumption w/o load Resolution (steps/turn) Reference signal Sensing method Output frequency Output signals Output circuit Interference immunity Emitted interference Approval 1 www.baumerivo.com www.baumerivo.com 30/10/2008 Subject to modification in technic and design. Errors and omissions excepted. Incremental encoders End shaft up to ø12 mm Resolution 5...6000 pulses GI330, GI332 Part number End shaft with center mounting GI330. See part number (pulses) E-connection C3 Connector M23, 12-pin, radial 41 Cable 1 m, radial Voltage supply / signals 22 5 VDC / linedriver RS422 70 4.75...30 VDC / push-pull 72 4.75...30 VDC / linedriver RS422 (5 VDC) Hollow shaft / torque pin 0 End shaft ø12 mm center mounting with pin 15 mm 1 End shaft ø12 mm center mounting with pin 9.5 mm A End shaft ø12 mm center mounting without pin Part number (pulses) 49 36 50 39 40 41 (5) (10) (25) (50) (60) (100) 57 06 09 13 14 15 (128) (200) (250) (360) (400) (500) 22 23 24 26 28 30 (1000) (1024) (1250) (1500) (2000) (2500) 31 34 35 48 (3600) (4096) (5000) (6000) End shaft with clamping ring GI332. See part number (pulses) E-connection C3 Connector M23, 12-pin, radial 41 Cable 1 m, radial Voltage supply / signals 22 5 VDC / linedriver RS422 70 4.75...30 VDC / push-pull 72 4.75...30 VDC / linedriver RS422 (5 VDC) Hollow shaft / torque pin 0 End shaft ø12 mm clamping ring on flange with pin 15 mm 1 End shaft ø12 mm clamping ring on flange with pin 9.5 mm A End shaft ø12 mm clamping ring on flange without pin Accessories Connectors and cables (page %S) Z 141.001 Z 141.003 Z 141.005 Z 141.007 Z 119.023 Z 119.024 Z 119.041 Female connector M23, 12-pin, less cable Female connector M23, 12-pin, 2 m cable Female connector M23, 12-pin, 5 m cable Female connector M23, 12-pin, 10 m cable Spring coupling for encoders with ø58 mm housing Torque support and spring washer for encoders with 9.5 mm pin Torque support by rubber buffer element for encoders with 15 mm pin Subject to modification in technic and design. Errors and omissions excepted. 30/10/2008 Other pulse numbers upon request. Example: ordering key 23 = 1024 pulses Mounting accessories (page %S) 2 www.baumerivo.com Incremental encoders End shaft up to ø12 mm Resolution 5...6000 pulses GI330, GI332 Output signals Clockwise rotating direction when looking at flange. Track A Track A Terminal assignment Connector Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Track B Track B 90° Pin 6 Pin 7 Pin 8 Pin 9 Pin 10 Zero pulse Zero pulse 8 7 6 5 12 11 91 10 2 3 4 Core colour pink blue red black brown green – grey – white/green white brown/green Assignment Track B inv. UB-Sense Track N (zero pulse) Track N inv. (zero pulse inv.) Track A Track A inv. – Track B – GND GND-Sense UB Pin 11 Pin 12 UB-Sense and GND-Sense are directly connected to UB resp. GND. Please use cores twisted in pairs (for example track A / track A inv.) for extension cables of more than 10 m length. Trigger level Outputs Output level High Output level Low Load High Load Low Outputs Output level High Output level Low Load High Load Low Linedriver RS422 >2.5 V (I = -20 mA)

下载 PDF

GI330.A22C313

物料型号： - GI330 和 GI332，这两个型号的增量式编码器具有不同的脉冲数，例如49(5)、57(128)、22(1000)、31(3600)等。

器件简介： - GI330 和 GI332 是增量式编码器，具有光学传感技术，最大分辨率可达6000脉冲/转，支持中心安装或通过夹紧环安装。

引脚分配： - 提供了M23, 12-pin的连接器和1米长的电缆。

参数特性： - 供电电压：5VDC±10% 或 4.75...30VDC。 - 反向极性保护：是（4.75...30VDC）。 - 无负载消耗：30mA（24VDC）或 ≤60mA（5VDC）。 - 分辨率（步/转）：5...6000。 - 参考信号：零脉冲，宽度90°。 - 输出频率：≤150kHz。 - 输出信号：A相90°，B相，N相及其反相。 - 输出电路：线驱动RS422推挽短路保护。 - 抗干扰：符合DIN EN61000-6-2标准。 - 发射干扰：符合DIN EN61000-6-4标准。 - 认证：UL认证/E63076。

功能详解： - 编码器具有12mm的轴径，支持光学传感，最大分辨率6000脉冲/转，支持中心安装或通过夹紧环安装，成本效益高的安装方式。

应用信息： - 适用于需要精确位置反馈的应用，如自动化控制、机器人技术等。

封装信息： - 外壳尺寸：058mm。 - 轴：12mm轴径。 - 保护等级：DIN EN 60529 IP54。 - 操作速度：≤6000转/分钟。 - 起动扭矩：≤0.03Nm。 - 转子转动惯量：14.5 gcm²。 - 材料：外壳和法兰均为铝制。 - 操作温度：-25...+100°C（5VDC），-25...+85°C（24VDC）。 - 相对湿度：95%不凝结。 - 抗振动：10g，16-2000Hz（DIN EN60068-2-27）。 - 抗冲击：200g，6ms。 - 重量：约250g。 - 电气连接：连接器或电缆。

GI330.A22C313 价格&库存

-> 查询更多价格&库存

很抱歉，暂时无法提供与“GI330.A22C313”相匹配的价格&库存，您可以联系我们找货

免费人工找货

搜索历史

GI330.A22C313

相关技术文章