GI338.1604140

Incremental encoders Mini series, with hollow shaft Resolution 5...2048 pulses GI338 Features – Mini encoder with end or hollow shaft – Resolution max. 2048 ppr – Housing ø40 mm – High rotation speed max. 12000 rpm – Operating temperature range -20...+85°C – End shaft up to ø12 mm, hollow shaft up to ø6 mm – Cost-efficient mounting GI338 with hollow shaft Technical data - electrical ratings Voltage supply 5 VDC ±10 % 10...30 VDC ≤60 mA 5...2048 Zero pulse, width 90° Optical ≤100 kHz A 90° B, N + inverted Linedriver RS422 Push-pull short-circuit proof DIN EN 61000-6-2 DIN EN 61000-6-4 Technical data - mechanical design Housing Shaft ø40 mm ø6 mm hollow shaft ø8 mm end shaft ø12 mm end shaft IP 42 IP 65 ≤6000 rpm IP 65 ≤12000 rpm IP 42 Housing: polyamide black Flange: aluminium Shaft: stainless -20...+85 °C 95 % non-condensing DIN EN 60068-2-6 Vibration 10 g, 16-200 Hz DIN EN 60068-2-27 Shock 50 g, 11 ms 85 g Cable 1 m Reverse polarity protection Yes (10...30 VDC) Consumption w/o load Resolution (steps/turn) Reference signal Sensing method Output frequency Output signals Output circuit Interference immunity Emitted interference Protection DIN EN 60529 Operating speed Materials Operating temperature Relative humidity Resistance Output signals Clockwise rotating direction when looking at flange. Output signals 5 VDC, linedriver Track A Track A Weight approx. E-connection Clockwise rotating direction when looking at flange. Output signals 10...30 VDC, push-pull Track B Track B 90° Track A Zero pulse Zero pulse Track B 90° Zero pulse 1 www.baumerivo.com www.baumerivo.com 30/10/2008 Subject to modification in technic and design. Errors and omissions excepted. Incremental encoders Mini series, with hollow shaft Resolution 5...2048 pulses GI338 Part number GI338. 41 See part number (pulses) E-connection 41 Cable 1 m, radial Voltage supply / signals 22 5 VDC / linedriver RS422 60 10…30 VDC / push-pull 0 1 3 4 7 Hollow shaft Hollow shaft ø6 mm torque support / IP 65 Hollow shaft ø6 mm spring washer / IP 65 End shaft ø8 mm spring coupling / IP 65 Hollow shaft ø6 mm torque support / IP 42 End shaft ø12 mm spring coupling / IP 65 Terminal assignment Linedriver Core colour Assignment brown green red yellow blue pink grey white Push-pull Core colour Assignment brown green yellow Part number (pulses) 49 39 40 41 (5) (50) (60) (100) 06 09 13 14 (200) (250) (360) (400) 15 22 23 28 (500) (1000) (1024) (2000) 29 (2048) pink white UB Track A Track B Track N (zero pulse) GND UB Track A Track A inv. Track B Track B inv. Track N (zero pulse) Track N inv. (zero pulse inv.) GND Please use cores twisted in pairs (for example track A / track A inv.) for extension cables of more than 10 m length. Other pulse numbers upon request. Example: ordering key 23 = 1024 pulses Dimensions Subject to modification in technic and design. Errors and omissions excepted. 30/10/2008 GI338 hollow shaft ø6 mm / torque support ø3 x 16 R15 ±3 12 33.5 9 ±1 6.5 ø6H7 ø16 GI338 hollow shaft ø6 mm / spring washer 33.5 ø45 2.4 6 8.5 1 5.5 27 0.5 40 6.5 5.5 27 GI338 end shaft ø8 mm 7 39.5 1.5 ø40 53 ø8H7 x 20 GI338 end shaft ø12 mm 39.5 7 1.5 ø40 ø12 H7 x 20 8.5 ø3.5 6.5 ø3.5 8.4 6.5 8.4 ø45 6.5 R=17.5±0.5 2.4 2 www.baumerivo.com