GP10W1102215

Incremental encoders Shaft with clamping or synchro flange, PTB approved Resolution 50 or 500 pulses GPI0W Features – Encoder with shaft ø10 mm or ø6 mm – PTB approved – Clamping flange or synchro flange – High rotation speed max.10000 rpm – Compact design – High resistance to shock and vibrations GPI0W with clamping flange Technical data - electrical ratings Voltage supply Consumption w/o load Resolution (steps/turn) Reference signal Sensing method Output frequency Output signals Output circuit Interference immunity Emitted interference Approval 10...30 VDC ≤30 mA (24 VDC) 50...500 Zero pulse, width 90° Optical ≤150 kHz A 90° B + N Push-pull short-circuit proof DIN EN 61000-6-2 DIN EN 61000-6-4 UL approval / E63076 Reverse polarity protection Yes Technical data - mechanical design Housing Shaft Flange Protection DIN EN 60529 Operating speed Starting torque Rotor moment of inertia Admitted shaft load Materials Operating temperature Relative humidity Resistance ø58 mm ø6 mm (synchro flange) ø10 mm (clamping flange) Clamping or synchro flange IP 54 ≤10000 rpm ≤0.015 Nm IP 54 14.5 gcm² ≤20 N axial ≤40 N radial Housing: aluminium Flange: aluminium -25...+85 °C 95 % non-condensing Subject to modification in technic and design. Errors and omissions excepted. 30/10/2008 DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms 250 g Cable Weight approx. E-connection Output signals Clockwise rotating direction when looking at flange. Track A Track B 90° Zero pulse 1 www.baumerivo.com www.baumerivo.com Shaft with clamping or synchro flange, PTB approved Resolution 50 or 500 pulses Incremental encoders GPI0W Part number GPI0W. 10 See part number (pulses) 12 14 16 22 24 26 E-connection Cable 2 m, axial Cable 5 m, axial Cable 10 m, axial Cable 2 m, radial Cable 5 m radial Cable 10 m, radial Accessories Mounting accessories (page %S) Z 119.006 Z 119.013 Z 119.015 Z 119.017 Z 119.025 Z 119.035 Eccentric fixing, single Adaptor plate for clamping flange for modification into synchro flange Mounting adaptor for synchro flange Mounting angle for clamping flange Adaptor plate for clamping flange, mounting by eccentric fixings (order separately) Bearing flange for encoders with synchro flange Voltage supply / signals 10 10...30 VDC / push-pull Flange / Shaft 0 Clamping flange, mounting M3 / ø10 mm 1 Clamping flange, mounting M4 / ø10 mm 5 Synchro flange, mounting M4 / ø6 mm Part number (pulses) 39 (50) 15 (500) Terminal assignment Core colour Assignment green blue beige black brown Trigger level Outputs Output level High Output level Low Load High Load Low Push-pull circuit-proof >UB -3 V (I = -20 mA)