GXA1W.AB101

Absolute encoders - parallel Shaft with clamping or synchro flange Singleturn encoder, capped gray code GXA1W - parallel Features – Encoder singleturn / parallel – Optical sensing – Clamping flange or synchro flange – Encoder with capped gray code – Short-circuit proof push-pull outputs – Output release by enable signal GXA1W with clamping flange Technical data - electrical ratings Voltage supply Consumption w/o load Initializing time (typ.) Interface Steps per turn Absolute accuracy Sensing method Code Code sequence Inputs 10...30 VDC ≤60 mA (24 VDC) 20 ms after power on 12 parallel outputs 2880 ±0.05° Optical Gray excess CW/CCW coded by connection UP/DOWN ENABLE STORE Push-pull short-circuit proof DIN EN 61000-6-2 DIN EN 61000-6-4 UL approval / E63076 Reverse polarity protection Yes Technical data - mechanical design Housing Shaft Flange Protection DIN EN 60529 Operating speed Starting torque Rotor moment of inertia Admitted shaft load Materials Operating temperature Relative humidity Resistance ø58 mm ø10 mm (clamping flange) ø6 mm (synchro flange) Clamping or synchro flange IP 54 without shaft seal IP 65 with shaft seal ≤10000 rpm (mechanical) ≤6000 rpm (electric) ≤0.015 Nm IP 54 ≤0.03 Nm IP 65 14.5 gcm² ≤20 N axial ≤40 N radial Housing: aluminium Flange: aluminium -25...+85 °C -40...+85 °C (optional) 95 % non-condensing DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms 250 g Connector, 16-pin Interference immunity Emitted interference Approval Weight approx. E-connection 1 www.baumerivo.com www.baumerivo.com 29/10/2008 Subject to modification in technic and design. Errors and omissions excepted. Output circuit Absolute encoders - parallel Shaft with clamping or synchro flange Singleturn encoder, capped gray code GXA1W - parallel Part number GXA1W. 10 Code 01 2880 Gray Excess 608 02 360 Gray Excess 76 E-connection B0 M23 connector, 16-pin axial B1 M23 connector, 16-pin radial 0 A 1 B Flange / Shaft Clamping flange / ø10 mm IP 54 Clamping flange / ø10 mm IP 65 Synchro flange / ø6 mm IP 54 Synchro flange / ø6 mm IP 65 Accessories Connectors and cables (page %S) Z 131.001 Z 131.003 Z 131.005 Z 131.007 Z 119.006 Z 119.013 Z 119.015 Z 119.017 Z 119.025 Z 119.035 Mating connector M23, 16-pin, less cable Mating connector M23, 16-pin, 2 m cable Mating connector M23, 16-pin, 5 m cable Mating connector M23, 16-pin, 10 m cable Eccentric fixing, single Adaptor plate for clamping flange for modification into synchro flange Mounting adaptor for synchro flange Mounting angle for clamping flange Adaptor plate for clamping flange, mounting by eccentric fixings (order separately) Bearing flange for encoders with synchro flange Mounting accessories (page %S) 2 www.baumerivo.com 29/10/2008 Subject to modification in technic and design. Errors and omissions excepted. Absolute encoders - parallel Shaft with clamping or synchro flange Singleturn encoder, capped gray code GXA1W - parallel Terminal significance UB GND Outputs D0-D11 UP/DOWN Encoder voltage supply. Encoder ground connection relating to UB. Up to 12 parallel output signals. UP/DOWN counting direction input. This input is standard on High. UP/DOWN means ascending output data with clockwise shaft rotation when looking at flange. UP/DOWN-Low means ascending values with counterclockwise shaft rotation when looking at flange. Input for activating the output drivers that are triggered by input level Low. Upon being on High (or less potential) the output drivers switch to high-impedance (Tristate). Input for output data storage. Upon a Low input level the encoder data are stored in the intermediate memory. Upon being on High (or less potential) the current encoder position data are switched to the output drivers. This line must be applied for reliable data readout in binary code. Terminal assignment Connector Core colour Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 9 Pin 10 Pin 11 Pin 12 Pin 13 Pin 14 Pin 15 Pin 16 violet white/brown white/green white/yellow white/grey white/pink white/blue white/red white/black green/brown green/grey blue yellow brown red pink Assignment 01 Output D0 Output D1 Output D2 Output D3 Output D4 Output D5 Output D6 Output D7 Output D8 Output D9 Output D10 GND ENABLE UP/DOWN UB Output D11 Assignment 02 Output D0 Output D1 Output D2 Output D3 Output D4 Output D5 Output D6 Output D7 Output D8 Output D8 N.C. GND ENABLE UP/DOWN UB STORE ENABLE STORE 10 11 1 9 16 13 2 12 8 15 14 3 7 4 65 Trigger level Control inputs Input level High Input level Low Input resistance Parallel outputs Output level High Output level Low Load High Load Low Tristate Input circuit >0.7 UB UB -3.5 V (I = -20 mA)