MR241.04

Accessories & Service Measuring wheels Description When selecting a measuring wheel the kind of material to be measured has to be taken into consideration prior to any decision on wheel surface respectively cover lining. The wheel circumference depends on the space available as well as on the size of counter or encoder. The smaller the measuring wheel, the more force required at the wheel circumference and consequently the higher the risk of slippage and incorrect measuring results. Also the width of the measuring wheel has an impact on the result. Technical data - Small measuring wheels MR211 Circumference Outer diameter Surface profile Surface material Wheel material Surface hardness, approx. Operating temperature Starting torque/pin 20 cm 63.66 mm cross knurl Aluminium Aluminium -30...+180 °C 1.5 Nm MR241 20 cm 63.66 mm smooth Hytrel TPE-E Plastic 90° Shore A -10...+70 °C 1.5 Nm MR261 20 cm 63.66 mm knopped rubber NBR Nitril Aluminium 55° ±5° Shore A -10...+50 °C 1.5 Nm MR291 20 cm 63.66 mm knurled Hytrel TPE-E Plastic 90° Shore A -10...+70 °C 1.5 Nm MR752 30.48 cm 97.02 mm smooth Vulkollan PUR Aluminium 65° Shore A -30...+80 °C 1.5 Nm Technical data - Large measuring wheels MR512 Circumference Outer diameter Surface profile Surface material Wheel material Surface hardness, approx. Operating temperature Starting torque/pin 50 cm 159.15 mm cross knurl Aluminium Aluminium -30...+180 °C 3 Nm MR542 50 cm 159.15 mm smooth Hytrel TPE-E Plastic 90° Shore A -10...+70 °C 3 Nm MR552 50 cm 159.15 mm smooth Vulkollan PUR Aluminium 94° Shore A -30...+80 °C 3 Nm MR562 50 cm 159.15 mm knopped rubber NBR Nitril Aluminium 55° ±5° Shore A -10...+50 °C 3 Nm MR592 50 cm 159.15 mm knurled Hytrel TPE-E Plastic 90° Shore A -10...+70 °C 3 Nm Subject to modification in technic and design. Errors and omissions excepted. 30/10/2008 Appropriate material to be measured Recommendend Surface Hytrel grooved Hytrel smooth Knurled Knopped rubber Vulkollan smooth Suitable material Plastic, painted material, paper, Cardboard, wood, metal, textiles Plastic, painted material, paper, Cardboard, wood, metal, textiles Cardboard, wood, (textiles) Textiles, cloth Plastic, painted material, paper, Cardboard, wood, metal, wire Measuring accuracy Precise measuring results of a meter counter with measuring wheel depend on: – Kind of measured material – Contact angle – Torque of counter or encoder – Feeding speed – Strain of measured material – Surface roughness – Contact pressure of material against measuring wheel – Elastictiy of measured material – Diametrical tolerance of the measuring wheel 1 www.baumerivo.com www.baumerivo.com Accessories & Service Measuring wheels Part number - 20 cm circumference MR211. A Bore 04 ø4 mm 07 ø7 mm MR241. D Bore ø4 mm ø5 mm ø6 mm ø7 mm ø10 mm D Bore ø4 mm ø5 mm ø6 mm ø7 mm ø10 mm Part number - 50 cm circumference MR512. A Bore 07 ø7 mm 10 ø10 mm MR542. D Bore ø6 mm ø7 mm ø10 mm ø12 mm 04 05 06 07 10 MR291. 06 07 10 12 MR261. A Bore ø4 mm ø6 mm ø7 mm ø10 mm MR552. A Bore 07 ø7 mm 10 ø10 mm MR562. A Bore 07 ø7 mm 10 ø10 mm 04 06 07 10 04 05 06 07 10 MR592. D Bore ø6 mm ø7 mm ø10 mm ø12 mm Part number - 1 foot circumference MR752. A Bore 04 ø4 mm 07 ø7 mm 10 ø10 mm Dimensions MR241, MR291 MR542, MR592 06 07 10 12 33 159.15 ±0.2 24.8 ±0.3 17.5 63.66 ± 0.1 12 8 M4 x 6 DIN916 M5 x 8 DIN914 2 www.baumerivo.com 30/10/2008 Subject to modification in technic and design. Errors and omissions excepted. ø4H 8 ø7H8 ø18 100 x 18 ø20