TA200.003AXA1

Tachometer electronic Rotation speed and velocity display Large 14 mm display LED, 6-digits, programmable TA200 Features – Tachometer for rotation speed and velocity – Display 6-digits – Connection: One-channel digital sensor or potentialfree contact – Impulse evaluation, sensor logic programmable – Frequencies up to 40 kHz – Period duration measurement TA200 - LED-Tachometer Technical data - electrical ratings Voltage supply 115/230 VAC ±10 % (50/60 Hz) 24/48 VAC ±10 % (50/60 Hz) 24 VDC ±10 % 7 VA, 5 W 12...26 VDC / max. 100 mA LED, 7-segment display 6-digits 14 mm 1/s, 1/min, 1/h programmable Tachometer Period duration measurement Comparator inputs NPN / PNP 25 Hz, 40 kHz programmable 0.0001...9999.99 >10 years in EEPROM Protection class II Overvoltage category II Pollution degree 2 DIN EN 61000-6-3 DIN EN 61000-6-2 Measuring units 1/h, 1/min, 1/s Scaling factor Sensor logic Pulse frequency UL/cUL, CE conform Technical data - mechanical design Operating temperature Storing temperature Relative humidity E-connection Core cross-section Protection DIN EN 60529 Operation / keypad Housing type Dimensions W x H x L Cutout dimensions Installation depth Mounting Weight approx. Material 0...+50 °C -20...+70 °C 80 % non-condensing Plug-in screw terminals 1.5 mm² IP 65 face with seal Membrane with softkeys Housing for control panel installation 96 x 48 x 124 mm 92 x 45 mm (+0.6) 123.75 mm Front panel installation by clip frame 350 g (AC), 250 g (DC) Housing: Makrolon 6485 (PC) Power consumption Sensor supply Display Number of digits Digit height Unit displayed Function Measuring principle Signal inputs Input logic Counting frequency Scaling factor Data memory Standard DIN EN 61010-1 Emitted interference Interference immunity Programmable parameters Approvals 1 www.baumerivo.com www.baumerivo.com 30/10/2008 Subject to modification in technic and design. Errors and omissions excepted. Rotation speed and velocity display Large 14 mm display LED, 6-digits, programmable Tachometer electronic TA200 Part number TA200.00 AXA1 Voltage supply 1 24 / 48 VAC 2 115 / 230 VAC 3 24 VDC Connection diagram 9 8 7 6 5 4 3 2 1 Supply voltage Block circuit diagram Voltage supply + Signal F1 2 3 8 Measuring value F1 4 5 Sensor supply + Trigger level Comparator input Inputs Input level Input level Low Input level High Input resistance Input circuit PNP- / NPN-logic Programmable 0...2 VDC 3...40 VDC 3 kΩ Signal F1 Sensor supply max. 250 V terminal - terminal / +24V 0V - terminal Dimensions 96 123.75 7 48 109 19.75 1-10 2 www.baumerivo.com 30/10/2008 Subject to modification in technic and design. Errors and omissions excepted.