TA201.003AXA1

Tachometer electronic Rotation speed ratio display Large 14 mm display LED, 6-digits, programmable TA201 Features – Tachometer for two rotation speeds and velocity – Display 6-digits – Connection: Two one-channel digital sensors or potential-free contacts – Ratio display – Impulse evaluation programmable – Input F1 with phase evaluation – Period duration measurement TA201 - LED-Tachometer Technical data - electrical ratings Voltage supply 115/230 VAC ±10 % (50/60 Hz) 24/48 VAC ±10 % (50/60 Hz) 24 VDC ±10 % 7 VA, 5 W 12...26 VDC / max. 100 mA LED, 7-segment display 6-digits 14 mm 1/s, 1/min, 1/h programmable Tachometer for 2 measured values and calculator function Period duration measurement Difference F1-F2 Ratio F1:F2 Stretch-/shrinking (F2-F1):F1 Flow Pulse rate measurement Comparator inputs NPN / PNP 2 Inputs Start, Stop F1: 10 kHz / F2: 25 Hz, 40 kHz 0.0001...9999.99 >10 years in EEPROM Protection class II Overvoltage category II Pollution degree 2 DIN EN 61000-6-3 DIN EN 61000-6-2 Assignment F1, F2 or F3 Calculating functions Count frequency UL/cUL, CE conform Description Two tachos to capture and display for example rotation speed and velocity by “F1” and “F2” as well as an operatorprogrammed calculating function that can be selected and displayed by “F3”. The calculating function may be used for example to evaluate ratio, difference, stretching/shrinking, flow, time elapsed with start and stop signal, impulse rate measurement, period or impulse duraction. Technical data - mechanical design Operating temperature Storing temperature Relative humidity E-connection Core cross-section Protection DIN EN 60529 Operation / keypad Housing type Dimensions W x H x L Cutout dimensions Installation depth Mounting Weight approx. Material 0...+50 °C -20...+70 °C 80 % non-condensing Plug-in screw terminals 1.5 mm² IP 65 face with seal Membrane with softkeys Housing for control panel installation 96 x 48 x 124 mm 93 x 45 mm (+0.6) 123.75 mm Front panel installation by clip frame 350 g (AC), 250 g (DC) Housing: Makrolon 6485 (PC) Subject to modification in technic and design. Errors and omissions excepted. 30/10/2008 Power consumption Sensor supply Display Number of digits Digit height Unit displayed Function Measuring principle Calculating functions Signal inputs Input logic Control inputs Control functions Counting frequency Scaling factor Data memory Standard DIN EN 61010-1 Emitted interference Interference immunity Programmable parameters Approvals 1 www.baumerivo.com www.baumerivo.com Rotation speed ratio display Large 14 mm display LED, 6-digits, programmable Tachometer electronic TA201 Part number TA201.00 AXA1 Voltage supply 1 24 / 48 VAC 2 115 / 230 VAC 3 24 VDC Connection diagram 9 8 7 6 5 4 3 2 1 Supply voltage Block circuit diagram Voltage supply + Signal F1 A F1 B F2 Start 6 7 8 A 90° B Measuring value F1 2 3 4 5 Sensor supply + Measuring value F2 Measuring value F3 Ratio F1 : F2 Difference F1 – F2 Stretching Shrinking Run time (measuring value 1 not active) Time (measuring value 2 not active) F2 Start F1 B F1 A +24V Stop 0V Stop 9 Signal Sensor supply max. 250 V terminal - terminal / - terminal Trigger level Comparator input Inputs Input level Input level Low Input level High Input resistance Input circuit PNP- / NPN-logic Programmable 0...2 VDC 3...40 VDC 3 kΩ Dimensions 96 123.75 7 109 19.75 1-10 2 www.baumerivo.com 30/10/2008 Subject to modification in technic and design. Errors and omissions excepted. 48