X700.1119A5

厂商：
IVO(堡盟)
封装：
描述：
X700.1119A5 - Absolute encoders - bus interfaces - Baumer IVO GmbH & Co. KG

数据手册：

下载X700.1119A5.pdf

立即购买

详情介绍
数据手册
价格&库存

X700.1119A5 数据手册

Absolute encoders - bus interfaces EX approval ATEX EEx d IIC T6 Multiturn encoder 13 bit ST / 16 bit MT X 700 - CANopen Features – Encoder multiturn / CANopen / ATEX – Optical sensing – Resolution: singleturn 13 bit, multiturn 16 bit – Clamping flange / shaft ø10 mm – Explosion protection per EEx d IIC T6 – Area of application: EX I/II 2 GD / ATEX 133213X – Device class 2 / zone 1 (gas), zone 21 (dust) – Galvanic isolation X 700 with CANopen Technical data - electrical ratings Voltage supply Consumption w/o load Initializing time (typ.) Interface Transmission rate Operating mode 10...30 VDC ≤50 mA (24 VDC) 250 ms after power on CANopen 10...1000 kBaud Event-triggered / Time-triggered Remotely-requested Sync (cyclic) / Sync (acyclic) 11 bit 8192 / 13 bit 65536 / 16 bit ±0.025° Optical Binary CW/CCW programmable CAN bus standard ISO / DIS 11898 DIN EN 61000-6-2 DIN EN 61000-6-4 Operating modes Total resolution Scaling Rotation speed monitoring Position or parameter error Multiturn sensing UL approval / E301461 Weight approx. E-connection Reverse polarity protection Yes Technical data - mechanical design Housing Shaft Flange Protection DIN EN 60529 Operating speed Starting torque Admitted shaft load Materials Operating temperature Relative humidity Resistance ø70 mm ø10 mm (clamping flange) Clamping flange IP 67 ≤6000 rpm (mechanical) ≤6000 rpm (electric) ≤0.4 Nm ≤60 N axial ≤50 N radial Housing: stainless steel Flange: stainless steel -25...+60 °C 95 % non-condensing Subject to modification in technic and design. Errors and omissions excepted. 11/11/2008 Identifier Steps per turn Number of turns Absolute accuracy Sensing method Code Code sequence Output circuit Interference immunity Emitted interference Programmable parameters DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms 1300 g Cable 2 m (other length upon request) Diagnostic functions Approval 1 www.baumerivo.com www.baumerivo.com Absolute encoders - bus interfaces EX approval ATEX EEx d IIC T6 Multiturn encoder 13 bit ST / 16 bit MT X 700 - CANopen Part number X 700.P 1 1 Interface 05 CANopen DSP 406 / 10-core cable 15 CANopen DSP 417 / 10-core cable A5 CANopen DSP 406 / 5-core cable B5 CANopen DSP 417 / 5-core cable E-connection 12 Cable 2 m, axial 19 Cable 20 m, axial Voltage supply / signals 1 10...30 VDC / 13 + 16 bit Flange / Shaft 1 Clamping flange / ø10 mm IP 67 CD with file descriptions is not included in the delivery. You may order them on CD as accessory free-of-charge under part number Z 150.022. Matching bus covers are listed in the chapter “Accessories”. Accessories Programming accessories Z 150.022 CD with describing files & manuals CANopen features Bus protocol Device proﬁle CANopen CANopen - CiA DSP 406, CANopen - CiA DSP 417 (Device Class 2, CAN 2.0B) Operating modes Event-triggered / Time-triggered Remotely-requested Sync (cyclic) / Sync (acyclic) Preset Parameter for setting the encoder to a requested position value assigned to a deﬁned shaft position of the system. The offset of encoder zero point and mechanical zero point is stored in the encoder. Rotating direction Parameter for deﬁning the rotating direction in which there have to be ascending or descending position values. Scaling Diagnosis Parameter deﬁning the steps per turn as well as the total resolution. The encoder supports the following error warnings: - Position and parameter error - Lithium battery voltage control (Multiturn) Heartbeat or Nodeguarding DSP 406 50 kbit/s, Node ID 1 DSP 417 250 kbit/s, Node ID 4 Node Monitoring Default 2 www.baumerivo.com 11/11/2008 Subject to modification in technic and design. Errors and omissions excepted. Absolute encoders - bus interfaces EX approval ATEX EEx d IIC T6 Multiturn encoder 13 bit ST / 16 bit MT X 700 - CANopen Terminal significance UB GND B CAN_L CAN_H CAN_GND Encoder voltage supply Encoder ground connection relating to UB CAN bus signal (dominant Low) CAN bus signal (dominant High) GND relating to CAN interface. Separated from GND B either by galvanic isolation. Terminal assignment Core colour Assignment 05/15 brown white green yellow black red bleu grey pink violet UB (IN) GNDB (IN) CAN_H (IN) CAN_L (IN) CAN_GND (IN) UB (OUT) GNDB (OUT) CAN_H (OUT) CAN_L (OUT) CAN_GND (OUT) Assignment A5/B5 UB GND CAN_H CAN_L – – – CAN GND – – Dimensions ~40 ø50 M5x10 (6x60°) 68 10 (21.5) 20 15 3 3 www.baumerivo.com www.baumerivo.com 3 11/11/2008 Subject to modification in technic and design. Errors and omissions excepted. ø10 g6 ø40 g6 ø30 ø64 ø70 9.5 Absolute encoders - bus interfaces EX approval ATEX EEx d IIC T6 Multiturn encoder 13 bit ST / 16 bit MT X 700 - CANopen 4 www.baumerivo.com 11/11/2008 Subject to modification in technic and design. Errors and omissions excepted.

下载 PDF

X700.1119A5

1. 物料型号： - 型号为X 700.P 1，支持CANopen接口。

2. 器件简介： - 该器件是一个具有CANopen接口的绝对编码器，支持ATEX认证，适用于易燃易爆环境。它具备光学传感技术，分辨率为单圈13位和多圈16位。

3. 引脚分配： - UB：编码器电源。 - GND B：编码器地线，与UB相对应。 - CAN_L：CAN总线信号（主导低）。 - CAN H：CAN总线信号（主导高）。 - CAN GND：CAN接口地线，与GND B通过电气隔离。

4. 参数特性： - 供电电压：10...30 VDC。 - 反向极性保护：有。 - 无负载消耗：50 mA（24 VDC）。 - 初始化时间：上电后250毫秒。 - 接口类型：CANopen。 - 传输速率：10...1000 kBaud。 - 工作模式：事件触发/时间触发。 - 每圈步数：8192/13位。 - 圈数：65536/16位。 - 绝对精度：±0.025°。 - 传感方法：光学。 - 编码：二进制。 - 输出电路：符合CAN总线标准ISO/DIS 11898。

5. 功能详解： - 支持远程请求同步（循环/非循环）。 - 可编程参数包括操作模式、总分辨率、缩放和转速监控。 - 诊断功能包括位置或参数错误、多圈传感。 - 认证：UL认证/E301461。

6. 应用信息： - 应用领域：EX I/II 2 GD / ATEX 133213X。 - 设备类别2/区域1（气体），区域21（粉尘）。

7. 封装信息： - 外壳尺寸：070 mm。 - 轴径：10 mm（夹紧法兰）。 - 法兰类型：夹紧法兰。 - 保护等级：DIN EN 60529 IP 67。 - 启动扭矩：≤0.4 Nm。 - 轴向和径向负载：≤60 N轴向，≤50 N径向。 - 材料：外壳和法兰均为不锈钢。 - 工作温度：-25...+60°C。 - 相对湿度：95%不凝结。 - 抗振动：DIN EN 60068-2-6 10g, 16-2000 Hz。 - 抗冲击：DIN EN 60068-2-27 200 g, 6 ms。 - 重量：约1300g。 - E-连接：电缆2米（其他长度可定制）。

X700.1119A5 价格&库存

-> 查询更多价格&库存

很抱歉，暂时无法提供与“X700.1119A5”相匹配的价格&库存，您可以联系我们找货

免费人工找货

搜索历史

X700.1119A5

相关技术文章