CPC1984Y

CPC1984Y 600V, 1A, Normally Open SIP Power Relay INTEGRATED CIRCUITS DIVISION Parameter Blocking Voltage Load Current On-Resistance (max) Input / Output Isolation Rating 600 1 0.66 4000 Units VP Arms / ADC  Vrms 1ADC/1Arms Load Current 600VP Blocking Voltage 4000Vrms Input/Output Isolation Power SIP Package High Reliability Low Drive Power Requirements Arc-Free With No Snubbing Circuits No EMI/RFI Generation Flammability Rating UL 94 V-0 The combination of low on-resistance and high load current handling capability makes this relay ideal for a variety of high performance switching applications. Approvals • UL 508 Recognized Component: File E69938 Applications • • • • • • • • • • • • The CPC1984Y single-pole normally open (1-Form-A) 600V Solid State Power Relay has a 1ADC / 1Arms continuous load current rating. Patented OptoMOS® optically coupled MOSFET technology, controlled by a highly efficient infrared LED, provides the CPC1984Y with 4000Vrms of input to output isolation. Features • • • • • • • • • Description Ordering Information Industrial Controls Motor Control Robotics Medical Equipment—Patient/Equipment Isolation Instrumentation Multiplexers Data Acquisition Electronic Switching I/O Subsystems Meters (Watt-Hour, Water, Gas) IC Equipment Home Appliances Part # CPC1984Y Description 4-Pin (8-Pin Body) Power SIP Package (25 per tube) Switching Characteristics of Normally Open Devices Form-A IF 90% 10% ILOAD Pin Configuration DS-CPC1984Y-R02 ton www.ixysic.com toff 1 INTEGRATED CIRCUITS DIVISION CPC1984Y Absolute Maximum Ratings @ 25ºC Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output (60 Seconds Maximum) 3 ESD Rating, Human Body Model Operational Temperature Storage Temperature 1 2 3 Ratings 600 5 50 1 150 1600 Units VP V mA A mW mW 4000 Vrms 4 -40 to +85 -40 to +125 kV °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Typical values are characteristic of the device at +25°C, and are the result of engineering evaluations. They are provided for information purposes only, and are not part of the manufacturing testing requirements. Derate linearly 1.33mW/ºC Derate linearly 16mW/ºC UL File 69938 is rated to 2500Vrms by UL. Electrical Characteristics @ 25ºC (Unless Otherwise Noted) Parameter Output Characteristics Load Current, Continuous 1 Load Current, Peak On-Resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate 3 Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Input/Output Characteristics Capacitance, Input-to-Output Conditions Symbol Min Typ Max Units IF=5mA, Free air IF=5mA, t=10ms IF=5mA, IL=1A IF=0mA, VL=600VP IL ILPK RON ILEAK - 0.51 - 1 5 0.66 1 A AP  µA IF=0mA, V=20VDC, f=1MHz ton toff COUT - 2.26 0.35 1.18 10 2 - IL=1A IF=5mA VR=5V IF IF VF IR 0.1 0.9 - 0.47 1.36 - 5 1.5 10 mA mA V µA - 2 - pF IF=5mA, IL=1A VIO=0VDC, f=1MHz CIO Load derates linearly from 1000mA @ 25ºC to 650mA @ 85ºC (5.83mA/ºC). 2 Measurement taken within 1 second of on-time. 3 For applications requiring high temperature operation (>60ºC) a minimum LED drive current of 10mA is recommended. ms nF 1 90% IF 0 10% Switching Waveforms t on t off 90% ILOAD 0 10% Thermal Characteristics Parameter Thermal Impedance (Junction to Ambient) 2 Symbol JA Rating 62.5°C/W www.ixysic.com R02 INTEGRATED CIRCUITS DIVISION CPC1984Y PERFORMANCE DATA* Typical IF for Switch Operation (N=50, IL=1A) Typical LED Forward Voltage Drop (N=50) 20 20 Device Count (N) Device Count (N) 25 15 10 5 0 1.345 1.350 1.355 1.360 LED Forward Voltage (V) Typical On-Resistance Distribution (N=50) 5 1.365 0.46 0.48 0.50 0.52 0.54 0.56 0.58 0.60 0.62 LED Forward Current (mA) Typical Turn-On Time Distribution (N=50) 25 Typical Turn-Off Time Distribution (N=50) 35 20 15 10 5 Device Count (N) 30 20 Device Count (N) Device Count (N) 10 0 1.340 15 10 5 25 20 15 10 5 0 0 0 0.49 0.50 0.51 0.52 0.53 On-Resistance (:) 2.0 0.54 1.6 LED Current (mA) IF=50mA IF=20mA IF=10mA IF=5mA 1.7 1.5 1.4 1.3 1.2 -50 -25 0 25 50 Temperature (ºC) 75 100 2.2 2.3 2.4 2.5 2.6 Turn-On Time (ms) 2.7 0.27 2.8 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 LED Current (mA) 1.8 2.1 Typical IF for Switch Operation vs. Temperature (IL=100mA) LED Forward Voltage Drop vs. Temperature LED Forward Voltage (V) 15 -50 -25 0 25 50 Temperature (ºC) 75 100 0.30 0.33 0.36 Turn-Off Time (ms) 0.39 Typical IF for Switch Dropout vs. Temperature (IL=100mA) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 -50 -25 0 25 50 Temperature (ºC) 75 100 *The Performance data shown in the graphs above is typical of device operation. Unless otherwise noted, data is presented at 25ºC. For guaranteed parameters not indicated in the written specifications, please contact our application department. R02 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION CPC1984Y PERFORMANCE DATA* 1.0 Typical Load Current vs. Load Voltage (IF=5mA) Typical Turn-On Time vs. LED Forward Current (IL=1A) 7 Typical Turn-Off Time vs. LED Forward Current (IL=1A) 2.0 0.5 0.0 -0.5 Turn-Off Time (ms) Turn-On Time (ms) Load Current (mA) 6 5 4 3 2 1.5 1.0 0.5 1 0.6 0 -25 0 25 50 Temperature (ºC) 75 100 0 25 50 Temperature (ºC) 75 25 Typical Turn-Off Time vs. Temperature (IF=5mA, IL=1A) 0.40 0.30 0.25 0.20 0.15 0.10 0.05 0.00 -25 0 25 50 Temperature (ºC) 75 100 -50 Typical Blocking Voltage vs. Temperature -25 0 25 50 Temperature (ºC) 75 100 Typical Leakage Current vs. Temperature 10PA 800 Blocking Voltage (VP) -25 5 10 15 20 LED Forward Current (mA) 0.35 750 700 650 600 1PA 100nA 10nA 550 500 -50 0 25 Typical Turn-On Time vs. Temperature (IF=5mA, IL=1A) -50 Maximum Load Current vs. Temperature (IF=10mA) 1200 1100 1000 900 800 700 600 500 400 300 200 100 0 10 9 8 7 6 5 4 3 2 1 0 5 10 15 20 LED Forward Current (mA) Turn-Off Time (ms) 0.4 Leakage Current -50 Load Current (mA) -0.2 0.0 0.2 Load Voltage (V) Typical On-Resistance vs. Temperature (IF=10mA, IL=1A) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0.0 0 -0.4 Turn-On Time (ms) On-Resistance (:) -1.0 -0.6 100 -50 -25 0 25 50 Temperature (ºC) 75 100 1nA -50 -25 0 25 50 Temperature (ºC) 75 100 Typical Output Capacitance vs. Load Voltage Output Capacitance (nF) 5 4 3 2 1 0 0 5 10 15 Load Voltage (VDC) 20 25 *The Performance data shown in the graphs above is typical of device operation. Unless otherwise noted, data is presented at 25ºC. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R02 INTEGRATED CIRCUITS DIVISION CPC1984Y Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits classifies its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) classification as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Classification CPC1984Y MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Soldering Profile Provided in the table below is the Classification Temperature (TC) of this product and the maximum dwell time the body temperature of this device may be (TC - 5)ºC or greater. The classification temperature sets the Maximum Body Temperature allowed for this device during lead-free reflow processes. For through-hole devices, and any other processes, the guidelines of J-STD-020 must be observed. Device Classification Temperature (Tc) Dwell Time (tp) Maximum Cycles CPC1984Y 245ºC 30 seconds 1 Board Wash IXYS Integrated Circuits recommends the use of no-clean flux formulations. Board washing to reduce or remove flux residue following the solder reflow process is acceptable provided proper precautions are taken to prevent damage to the device. These precautions include, but are not limited to: using a low pressure wash and providing a follow up bake cycle sufficient to remove any moisture trapped within the device due to the washing process. Due to the variability of the wash parameters used to clean the board, determination of the bake temperature and duration necessary to remove the moisture trapped within the package is the responsibility of the user (assembler). Cleaning or drying methods that employ ultrasonic energy may damage the device and should not be used. Additionally, the device must not be exposed to flux or solvents that are Chlorine- or Fluorine-based. R02 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION CPC1984Y MECHANICAL DIMENSIONS CPC1984Y Power SIP Package 21.082±0.381 (0.830±0.015) PCB Hole Pattern 3.302±0.051 (0.130±0.002) 10.160±0.127 (0.400±0.005) 1.75 (0.069) 7º TYP 4 Places Pin 1 1.778 (0.070) 0.762±0.076 (0.030±0.003) 2.540±0.127 (0.100±0.005) 4.572±0.127 (0.180±0.005) 10.160±0.127 (0.400±0.005) 5.080±0.127 (0.200±0.005) 1.651±0.102 (0.065±0.004) 5.080 (0.200) 10.160 (0.400) 1.016±0.127 (0.040±0.005) Pin 1 1.150 DIA. x4 (0.045 DIA. x4) 2.540 (0.100) 0.381±0.013 (0.015±0.0005) 1.778 (0.070) 7º TYP 4 Places Note: Pin-to-pin tolerances are non-cumulative. Dimensions mm (inches) For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits' Standard Terms and Conditions of Sale, IXYS Integrated Circuits assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits' product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits reserves the right to discontinue or make changes to its products at any time without notice. 6 Specification: DS-CPC1984Y-R02 ©Copyright 2018, IXYS Integrated Circuits OptoMOS® is a registered trademark of IXYS Integrated Circuits All rights reserved. Printed in USA. 8/17/2018