ISO 9001: 201
2015
IXYS Integrated Circuits
Product Catalog 2018 - 2019
High Voltage, Analog & Mixed Signal ICs, Optically Isolated Devices
IXYS Integrated Circuits
IXYS Integrated Circuits, formerly a wholly owned subsidiary of IXYS Corporation, is now part of Littelfuse. IXYS Integrated Circuits designs, manufactures, and markets a wide
variety of semiconductor devices and is a major provider of optically isolated electronic components.
IXYS Integrated Circuits
IXYS Integrated Circuits’ unique mix of high voltage wafer fabrication, isolation barrier expertise, multi-chip packaging experience, and expertise in analog, mixed signal, and
power design, points the way to greater functionality in a smaller footprint at lower cost for your designs.
Products and Markets
• IGBT and MOSFET Drivers: High voltage, low-side, and optically isolated IGBT and MOSFET drivers, many of which are AEC-Q100 qualified.
• High Voltage ICs: High voltage 8-channel and 16-channel analog switches for the medical and imaging markets, high voltage LED drivers, and others.
• Solid State Relays (SSR): One of the industry’s broadest lines of optically isolated SSRs, available in a wide selection of configurations, blocking voltages, and load currents.
• Power Market: Power solid state relays; SCR-based AC power switches (zero-cross & rapid turn-on); and N-channel, depletion-mode, field effect transistors (FET).
• Lighting: High voltage LED drivers.
• High Speed Digital Optical Isolators: High speed isolators that pass DC signals, require no refresh clocking, and provide 3750Vrms of galvanic isolation.
• I2C Optically Isolated Bus Repeaters: New high speed repeaters that buffer both I2C signals, require no refresh clocking, and provide 3750Vrms of galvanic isolation.
• Portable reader devices: Drivers for ePaper readers and displays.
• RFID Devices: Read-Only and HDX devices for single transponder applications operating in the low frequency (134.2 kHz) range, and supporting ISO 11784/85 standards.
• Non-volatile Digitally Programmable Capacitors: Provide capacitive offset trimming for capacitance sensitive circuits.
• Telecommunications: a broad range of products:
LITELINK® silicon Data Access Arrangement (DAA)
Phone-line interface and monitoring devices
LCAS: Line Card Access Switch products
DC Termination devices for xDSL and ISDN applications
Cybergate™ DAA
2
IXYS Integrated Circuits − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
TABLE OF CONTENTS
HIGH VOLTAGE PRODUCTS
HIGH VOLTAGE ANALOG SWITCH ARRAYS ................................................26
HIGH VOLTAGE ISOLATED ANALOG SWITCHES ...........................................27
NUMERICAL INDEX TO ALL PRODUCT CATALOG DEVICES ...............................4
SOLID STATE RELAYS
HIGH SPEED DIGITAL OPTICAL ISOLATORS
FAULT PROTECTED RELAYS
OPTOCOUPLERS
1-FORM-A RELAYS (NORMALLY OPEN).....................................................7
1-FORM-B RELAYS (NORMALLY CLOSED) ...............................................10
MISCELLANEOUS RELAYS ......................................................................11
CURRENT LIMITING SSRS WITH VTS AND THM.......................................13
OPTICALLY ISOLATED POWER RELAYS
1-FORM-A POWER RELAYS ..................................................................15
1-FORM-B POWER RELAYS ..................................................................15
OPTICALLY ISOLATED AC POWER SWITCHES
OPTICALLY ISOLATED AC POWER SWITCHES: LOAD CURRENT ≤1A .............16
OPTICALLY ISOLATED AC POWER SWITCHES: LOAD CURRENT >1A .............17
OPTICALLY ISOLATED I2C BUS REPEATERS ..............................................30
SINGLE-CHANNEL EACH DIRECTION DIGITAL OPTICAL ISOLATOR ..................31
DUAL HIGH SPEED DIGITAL OPTICAL ISOLATOR ........................................31
SINGLE & DUAL OPTOCOUPLERS ...........................................................32
LINEAR OPTOCOUPLERS .......................................................................33
LIGHTING & DISPLAY PRODUCTS
HIGH VOLTAGE LED DRIVERS ...............................................................34
TELECOMMUNICATIONS PRODUCTS
LITELINK™ SILICON DAA PHONE LINE INTERFACE ...............................36
SINGLE-CHANNEL VOICE-BAND CODEC ..................................................37
CALL PROGRESS TONE DETECTOR.........................................................37
LINE CARD ACCESS SWITCHES (LCAS).................................................38
LCAS FOR RINGING SLIC ..................................................................39
CYBERGATE™ DATA ACCESS ARRANGEMENT (DAA) MODULES ..................39
DC TERMINATION ICS (XDSL, ISDN) ...................................................40
TELECOM MULTIFUNCTION PRODUCTS .....................................................41
LINE SENSE RELAY .............................................................................41
MULTIFUNCTION PRODUCTS: SSR/OPTOCOUPLER
GENERAL PURPOSE MULTIFUNCTION PRODUCTS .......................................18
TELECOM MULTIFUNCTION PRODUCTS .....................................................41
FIELD EFFECT TRANSISTORS
N-CHANNEL DEPLETION MODE FETS ....................................................19
IGBT & MOSFET GATE DRIVERS
LOW-SIDE GATE DRIVERS ....................................................................20
600V HIGH SIDE & LOW SIDE GATE DRIVER..........................................21
HIGH VOLTAGE HALF-BRIDGE GATE DRIVER ............................................21
1200V HIGH AND LOW SIDE GATE DRIVER ............................................22
2.5A OUTPUT OPTICALLY COUPLED GATE DRIVER ...................................23
2.5A OUTPUT HI SPEED GATE DRIVER OPTOCOUPLER .............................23
OPTICALLY ISOLATED PHOTOVOLTAIC GATE DRIVERS ..................................24
OPTICALLY ISOLATED LOAD-BIASED GATE DRIVERS ...................................25
VOLTAGE MONITORING & SENSING ICS
VOLTAGE MONITORING DEVICES.............................................................42
LOW VOLTAGE ERROR AMP WITH HIGH VOLTAGE DARLINGTON TRANSISTOR...43
OPTICALLY ISOLATED ERROR AMPLIFIERS ................................................44
RFID PRODUCTS
RFID TAGS .......................................................................................45
DIGITALLY PROGRAMMABLE CAPACITORS
NON-VOLATILE DIGITAL PROGRAMMABLE CAPACITORS ...............................46
Note: Drawings and photographs of IXYS Integrated Circuits products shown in this catalog are for illustrative purposes only
and do not necessarily portray accurate physical details, marking, or branding. They exist solely to provide additional useful information.
3
+1 978 524 6700,
+1 978 524 4700 − Customer Service
+1 978 524 6768,
+1 978 524 4900
Table of Contents
PART NUMBER INDEX
PART NUMBER INDEX
Part Number Index
CPC1001N
32
CPC1301
32
CPC1786J
15
CPC1977J
15
CPC3982
19
CYG2020
39
CPC1002N
11
CPC1302
32
CPC1788J
15
CPC1978J
15
CPC40055ST
17
CYG2100
39
CPC1004N
11
CPC1303
32
CPC1906Y
15
CPC1979J
15
CPC5001
31
CYG2110
39
CPC1006N
7
CPC1317
7
CPC1907B
15
CPC1981Y
15
CPC5002
31
CYG2111
39
CPC1008N
7
CPC1330
7
CPC1908J
15
CPC1983B
15
CPC5602
19
CYG2217
39
CPC1009N
7
CPC1333
10
CPC1909J
15
CPC1983Y
15
CPC5603
19
CYG2218
39
CPC1010N
7
CPC1335
7
CPC1916Y
15
CPC1983YE
15
CPC5620
34
CYG2320
39
CPC1014N
7
CPC1390
7
CPC1918J
15
CPC1984Y
15
CPC5621
34
FDA215
24
CPC1016N
7
CPC1393
7
CPC1926Y
15
CPC1986J
15
CPC5622
34
FDA217
24
CPC1017N
7
CPC1394
7
CPC1927J
15
CPC1988J
15
CPC5710
42
IAA110
18
CPC1018N
7
CPC1465
40
CPC1943
16
CPC1998J
17
CPC5712
42
IAB110
18
CPC1019N
7
CPC1466
40
CPC1945G
16
CPC2014N
9
CPC5750
37
IAD110
18
CPC1020N
7
CPC1510
7, 13
CPC1945Y
16
CPC2017N
9
CPC5902
30
IBB110
18
CPC1025N
7
CPC1511
7, 13
CPC1961
16
CPC2025N
9
CPC5903
30
ITC117
41
CPC1030N
7
CPC1540
7, 13
CPC1963
16
CPC2030N
9
CPC7220
26
ITC117L
41
CPC1035N
7
CPC1560
7, 13
CPC1964B
17
CPC2125N
10
CPC7232
26
ITC135
41
CPC1106N
10
CPC1563
7, 13
CPC1964BX6
17
CPC2317N
11
CPC7508
39
ITC137
41
CPC1114N
10
CPC1580
25
CPC1965G
16
CPC2330N
11
CPC7512
29
IX2113
21
CPC1117N
10
CPC1590
25
CPC1965Y
16
CPC2907B
15
CPC7514
28
IX2120
22
CPC1125N
10
CPC1593
7, 13
CPC1966Y
17
CPC3701
19
CPC7524
27
CPC1130N
10
CPC1596
25
CPC1966B
17
CPC3703
19
CPC7591
38
IX21844
21
CPC1135N
10
CPC1705Y
15
CPC1966BX8
17
CPC3708
19
CPC7592
38
IX3120
23
CPC1150N
10
CPC1706Y
15
CPC1966YX6
17
CPC3710
19
CPC7601
26
IX3180
23
CPC1215
11
CPC1708J
15
CPC1966YX8
17
CPC3714
19
CPC7691
38
IX332B
24
CPC1217
11
CPC1709J
15
CPC1967J
15
CPC3720
19
CPC7692
38
IX4340
20
CPC1218
11
CPC1718J
15
CPC1968J
15
CPC3730
19
CPC7695
38
IX4340NE
20
CPC1219
12
CPC1726Y
15
CPC1972
16
CPC3902
19
CPC7701
26
IX4423
20
7
CPC1727J
15
CPC1973Y
15
CPC3909
19
CPC9909
35
IX4424
20
CPC1230N
7
CPC1777J
15
CPC1976
17
CPC3960
19
CYG2000
39
IX4425
20
CPC1231N
10
CPC1779J
15
CPC1976YX6
17
CPC3980
19
CYG2011
39
IX4426
20
CPC1225N
4
For data sheets, go to www.ixysic.com/Products/ProdList.htm
IXYS Integrated Circuits − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
20
LBA120L
11
LCB111
10
LOC210
33
PLA134
8
XAA170
9
IX4428
20
LBA127
11
LCB120
10
LOC211
33
PLA140
8
XBB170
10
IX9907
34
LBA127L
11
LCB126
10
M-949-11
41
PLA140L
8
XCA170
8
IX9908
35
LBA710
11
LCB127
10
M-980-02
37
PLA143
8
XCB170
10
IX9915
43
LBA716
11
LCB710
10
MXHV9910
34
PLA150
8
XS170
18
IXD_602
20
LBB110
10
LCB716
10
NCD1015ZP
45
PLA160
8
IXD_604
20
LBB120
10
LCB717
10
PLA170
8
IXD_604SI
20
LBB126
10
LCC110
12
NCD2100
47
PLA171
8
IXD_604SIA
20
LBB127
10
LCC120
12
NCD2400M
46
PLA172P
8
IXD_609
20
LCA100
7
LDA100
32
OAA160
9
PLA190
8
IXD_609SI
20
LCA100L
7
LDA101
32
OMA160
8
PLA191
8
IXD_614
20
LCA110
7
LDA102
32
PAA110
9
PLA192
8
IXD_614SI
20
LCA110L
7
LDA110
32
PAA110L
9
PLA193
8
IXD_630
20
LCA120
7
LDA111
32
PAA127
9
PLA194
8
IXD_630M
20
LCA120L
7
LDA200
32
PAA132
9
PLB150
10
LAA100
9
LCA125
7
LDA201
32
PAA140
9
PLB171
10
LAA100L
9
LCA125L
7
LDA202
32
PAA140L
9
PLB190
10
LAA108
9
LCA127
8
LDA203
32
PAA150
9
PM1204
16
LAA110
9
LCA127L
8
LDA210
32
PAA190
9
PM1205
16
LAA110L
9
LCA129
8
LDA211
32
PAA191
9
PM1206
16
LAA120
9
LCA182
8
LDA212
32
PAA193
9
PS1201
16
LAA120L
9
LCA210
12
LDA213
32
PBA150
11
PS2401
16
LAA125
9
LCA210L
12
LIA120
44
PBB150
10
PS2601
16
LAA125L
9
LCA220
12
LIA130
44
PBB190
10
TS117
18
LAA127
9
LCA701
8
LIA135
44
PD1201
16
TS117L
18
LAA127L
9
LCA710
8
LIA136
44
PD2401
16
TS118
18
LAA710
9
LCA712
8
LOC110
33
PD2601
16
TS120
18
LBA110
11
LCA715
8
LOC111
33
PLA110
8
TS190
18
LBA110L
11
LCA717
8
LOC112
33
PLA110L
8
TS190L
18
LBA120
11
LCB110
10
LOC117
33
PLA132
8
XAA117
9
For data sheets, go to www.ixysic.com/Products/ProdList.htm
+1 978 524 6700,
+1 978 524 4700 − Customer Service
+1 978 524 6768,
+1 978 524 4900
Part Number Index
IX4427
5
SOLID STATE RELAYS
4-Pin SOP
Type BI
4-Pin SIP (8-Pin Body)
10
6-Pin Surface Mount
Type BI+ (BI)
Type UNI
± Load
± Load
+ Load
± Load
Do Not
Use
± Load
– Load
Control
Input
12
Solid State Relays
-I
All waveforms are into a resistive load
Type BI relays conduct load current in both directions.
Type BI+ relays, in BI configuration, conduct load current in both directions.
4-Pin V-DIP
8-Pin DIP
Load
Current
-I
43
17
-V
+I
Load
Current
44-Pin
Pin Surface Mount
8-Pin SOP
Load
Voltage
-V
+I
42
14
+V
Load
Voltage
4-Pin DIP
– Load
Control
Input
+V
6-Pin DIP
+ Load
Polarity Dependent
Polarity Independent
41
Type BI+ (UNI)
Type UNI relays conduct load current from the positive terminal to the negative terminal only.
44
Type BI+ relays, in UNI configuration with output MOSFETs wired in parallel, enable higher load
current from positive terminal to negative terminal only.
20
4-Pin DIP (14-Pin Body)
The accompanying SSR tables reference these types (BI, BI+, & UNI) for all devices listed.
8-Pin Flatpack
21
• Replace electromechanical relays
• Replace mechanical switches
• Implement computer control
61
8-Pin Surface Mount
of electromechanical circuits
22
6-Pin Flatpack (8-Pin Body)
Features:
4-Pin SIP (8-Pin Body)
36
6
62
Packages are referenced
by number
in the accompanying
solid state relay selection tables.
• Low drive current
• High reliability
• No EMI/RFI generation
• Arc-free with no snubbing circuits
• AC or DC switching
• Current limiting devices available
• FCC compatible
• Low off-state leakage
Applications:
• Telecommunications/data communications
• Instrumentation
• Multiplexers
• Data acquisition/electronic switching
• Meters (Watt-hour, water, gas)
• Medical equipment (patient/equipment isolation)
• Security
• Aerospace
• Industrial controls
For data sheets, go to www.ixysic.com/Products/ProdList.htm
IXYS Integrated Circuits − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
• 1-FORM-A RELAYS (NORMALLY OPEN)
BI+
BI
1-Form-A Relays: Single-Pole
Relay
Type
Blocking
Voltage
Load
Current
On
Resistance
BI
(VP)
60
(mA)
CPC1006N
CPC1008N
CPC1009N
CPC1010N
CPC1014N
CPC1016N
CPC1017N
CPC1018N
CPC1019N
CPC1020N
CPC1025N
CPC1030N
CPC1035N
CPC1225N
CPC1230N
CPC1317
CPC1330
CPC1335
CPC1390
CPC1393
CPC1394
CPC1510
CPC1511
CPC1540
CPC1560
CPC1563
CPC1593
LCA100
LCA100L
LCA110
LCA110L
LCA120
LCA120L
LCA125
LCA125L
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI+
BI
BI+
BI+
BI+
BI+
BI+
BI+
BI+
BI+
BI+
BI+
BI+
BI+
100
100
250
60
100
60
60
60
30
400
350
350
400
350
70
350
350
400
600
600
250
230
350
60
600
600
350
350
350
350
250
250
300
300
150
150
170
400
100
100
600
750
1200
120
120
100
120
120
150
120
100
140
90
120
200
450
120
300
120
120
120
120
120
120
170
150
170
170
75
Switching
Speeds
ton / toff
(ms)
10 / 10
Isolation
Voltage
Off-State
Leakage
(Ω)
10
Input
Control
Current
(mA)
0.5
(Vrms)
1500
(μA)
1
8
8
11.5
2
16
16
0.8
0.6
0.25
30
30
35
30
30
16
30
35
22
50
35
15
4
25
5.6
35
35
25
25
35
35
20
20
16
20
2
2
2
2
2
1
1
2
2
2
2
2
2
2
1
2
1
2
2
2
2
2.5
2
1.1
2
2
5
5
2
2
5
5
5
5
2/1
2 / 0.5
3/3
2/1
2/1
10 / 10
3/2
3/3
3/3
2/1
2/1
2/1
2/1
2/1
2.5 / 2.5
2/1
10 / 10
1/1
5/5
5/3
2/2
4/2
2/2
0.1 / 0.4
2/2
2/2
5/5
5/5
3/3
3/3
3/3
3/3
5/5
5/5
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
3750
5000
3750
5000
5000
5000
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
1
0.02
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Package
Type
(Page 6)
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
21
42, 43
21
42, 43, 44
42, 43, 44
42, 43, 44
12, 14
36
12, 14
20, 22
12, 14
12, 14
12, 14
12, 14
12, 14
12, 14
12, 14
12, 14
12, 14
12, 14
Features and Comments
Low IF , EN 50130-4
Very low off-state ILEAK ≤ 20nA
EN 50130-4
Low IF , EN 50130-4
Low IF , EN 50130-4
Solid State Relays
Part
Number
High load current, very low on-resistance
EN/IEC 60950-1 Supplementary Insulation (0.4mm distance through insulation)
EN/IEC 60950-1 Supplementary Insulation (0.4mm distance through insulation)
EN 50130-4 (installation class 3), transient voltage suppression (TVS)
Enhanced isolation voltage
Low IF , EN 50130-4 (installation class 3), transient voltage suppression (TVS)
Enhanced isolation voltage
Enhanced isolation voltage
Enhanced isolation voltage
Current limiting with thermal management - see page 13
Current limiting with thermal management - see page 13
Current limiting with thermal management - see page 13
Current limiting with thermal management - see page 13
Current limiting with thermal management - see page 13
Current limiting, thermal management, voltage triggered shutdown - see page 13
Current limiting
Current limiting
Current limiting
Current limiting
For data sheets, go to www.ixysic.com/Products/ProdList.htm
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900
7
BI
BI+
1-Form-A Relays: Single-Pole (continued)
Solid State Relays
Part
Number
Relay
Type
Blocking
Voltage
Load
Current
On
Resistance
(Ω)
BI+
BI+
BI+
BI+
(VP)
250
250
250
350
(mA)
LCA127
LCA127L
LCA129
LCA182
200
170
170
120
10
15
20
35
LCA701
LCA710
LCA712
LCA715
LCA717
OMA160
PLA110
PLA110L
PLA132
PLA134
PLA140
PLA140L
PLA143
PLA150
PLA160
PLA170
PLA171
PLA172P
PLA190
PLA191
PLA192
PLA193
PLA194
XCA170
BI+
BI+
BI+
BI+
BI+
BI+
BI+
BI+
BI+
BI+
BI+
BI+
BI+
BI+
BI+
BI+
BI
BI
BI+
BI+
BI+
BI+
BI+
BI+
100
60
60
60
30
250
400
400
60
100
400
400
600
250
300
800
800
800
400
400
600
600
600
350
1500
1000
1000
2200
2000
50
150
150
600
350
250
200
100
250
50
100
100
100
150
250
150
100
130
100
8
0.3
0.5
0.5
0.15
0.15
100
22
25
1
3
8
13
50
7
100
50
50
50
22
8
22
50
35
50
Input
Control
Current
(mA)
5
5
2
0.25
2
10
10
5
2
10
5
5
2
5
5
5
2
5
10
5
2
2
5
5
5
5
2
5
Switching
Speeds
ton / toff
(ms)
Isolation
Voltage
Off-State
Leakage
Package
Type
(Page 6)
5/5
5/5
8/8
3/3
(Vrms)
3750
3750
3750
3750
(μA)
1
1
1
1
12, 14
12, 14
12, 14
12, 14
4/1
2.5 / 0.25
2.5 / 0.35
2.5 / 0.25
3/3
0.125 / 0.125
1 / 0.5
1 / 0.25
5/2
5/5
3/1
5/3
5/5
2.5 / 0.5
0.05 / 0.05
5/5
5/5
5/5
1 / 0.5
3/1
5/5
5/5
3/2
5/5
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
4000
3750
3750
3750
5000
5000
5000
5000
5000
5000
5000
3750
1
1
0.01
1
1
0.025
1
1
1
1
1
1
1
0.025
1
1
1
1
1
1
1
1
1
12, 14
12, 14
12, 14
12, 14
12, 14
12, 14
12, 14
12, 14
12, 14
12, 14
12, 14
12, 14
12, 14
12, 14
12, 14
12, 14
62
62
12, 14
12, 14
12, 14
12, 14
12, 14
12, 14
Features and Comments
Current limiting
Very low IF
High load current
High load current
High load current, low ILEAK
High load current
High load current
Low ILEAK , fast switching times
Current limiting
Current limiting
Enhanced isolation voltage
Low ILEAK , fast switching times
Enhanced isolation voltage, high blocking voltage (output pins 7mm separation)
-40ºC to +105ºC Operational Temperature Range
Enhanced isolation voltage
Enhanced isolation voltage
Enhanced isolation voltage, PLA192E is DIN EN 60747-5-5 Certified
Enhanced isolation voltage, PLA193E is DIN EN 60747-5-5 Certified
Enhanced isolation voltage
For data sheets, go to www.ixysic.com/Products/ProdList.htm
IXYS Integrated Circuits − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
BI
1-Form-A Relays: Dual Single-Pole
Relay
Type
Blocking
Voltage
Load
Current
CPC2014N
CPC2017N
BI
BI
(VP)
60
60
(mA)
400
120
CPC2025N
CPC2030N
LAA100
LAA100L
LAA108
LAA110
LAA110L
LAA120
LAA120L
LAA125
LAA125L
LAA127
LAA127L
LAA710
OAA160
PAA110
PAA110L
PAA127
PAA132
PAA140
PAA140L
PAA150
PAA190
PAA191
PAA193
XAA117
XAA170
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
400
350
350
350
100
350
350
250
250
350
350
250
250
60
250
400
400
280
60
400
400
250
400
400
600
60
350
120
120
120
120
300
120
120
170
150
170
150
200
170
1000
50
150
150
200
600
250
200
250
150
250
100
150
100
On
Resistance
(Ω)
2
16
30
30
25
25
8
35
35
20
25
16
18
10
10
0.5
100
22
25
10
1
8
13
7
22
8
50
16
50
Input
Control
Current
(mA)
2
1
Switching
Speeds
ton / toff
(ms)
2/1
3/3
Isolation
Voltage
Off-State
Leakage
Package
Type
(Page 6)
(Vrms)
1500
1500
(μA)
1
1
17
17
2
2
5
5
2
5
5
5
5
5
5
5
5
10
6
5
5
3
2
5
5
5
5
5
5
1
5
2/1
2/1
5/5
5/5
3/3
3/3
3/3
5/5
5/5
5/5
5/5
5/5
5/5
2.5 / 0.25
0.125 / 0.125
1 / 0.25
1 / 0.5
0.5 / 0.5
5/2
3/1
5/3
2.5 / 0.5
1 / 0.5
3/1
5/5
5/5
5/5
1500
1500
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
5000
5000
5000
3750
3750
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0.025
1
1
0.025
1
1
1
1
1
1
10
1
1
17
17
20, 21, 22
20, 21, 22
20, 21, 22
20, 21, 22
20, 21, 22
20, 21, 22
20, 21, 22
20, 21, 22
20, 21, 22
20, 21, 22
20, 21, 22
20, 22
20, 21, 22
20, 21, 22
20, 21, 22
20, 21, 22
20, 22
20, 21, 22
20, 22
20, 21, 22
20, 22
20, 22
20, 22
20, 21, 22
20, 21, 22
Features and Comments
EN 50130-4
Low IF , EN 50130-4
Current limiting
Solid State Relays
Part
Number
Current limiting
Current limiting
Current limiting
Current limiting
Very low ILEAK , fast switching times
Current limiting
Very low ILEAK , fast switching times
Current limiting
Enhanced isolation voltage
Enhanced isolation voltage
Enhanced isolation voltage
Low IF
For data sheets, go to www.ixysic.com/Products/ProdList.htm
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900
9
• 1-FORM-B RELAYS (NORMALLY CLOSED)
BI
BI+
1-Form-B Relays: Single-Pole
Solid State Relays
Part
Number
Relay
Type
Blocking
Voltage
Load
Current
On
Resistance
Switching
Speeds
ton / toff
(ms)
10 / 10
Isolation
Voltage
Off-State
Leakage
(Ω)
10
Input
Control
Current
(mA)
0.5
CPC1106N
BI
(VP)
60
(mA)
75
(Vrms)
1500
(μA)
1
CPC1114N
CPC1117N
CPC1125N
CPC1130N
CPC1135N
CPC1150N
CPC1231N
CPC1333
LCB110
LCB111
LCB120
LCB126
LCB127
LCB710
LCB716
LCB717
PLB150
PLB171
PLB190
XCB170
BI
BI
BI
BI
BI
BI
BI
BI
BI+
BI+
BI+
BI+
BI+
BI+
BI+
BI+
BI+
BI
BI+
BI+
60
60
400
350
350
350
350
350
350
350
250
250
250
60
60
30
250
800
400
350
400
150
100
120
120
120
120
130
120
120
170
170
200
1000
500
1500
250
80
130
100
2
16
35
30
35
50
30
30
35
35
20
15
10
0.6
2
0.3
7
55
25
50
2
1
2
2
2
2
2
2
5
2
5
5
5
2
2
2
5
2
2
5
2/5
10 / 10
2/2
2/2
2/2
1/2
2/2
2/3
3/3
5/5
5/5
5/5
5/5
3/3
3/3
2/5
1 / 2.5
5/5
1 / 2.5
5/5
1500
1500
1500
1500
1500
1500
1500
5000
3750
3750
3750
3750
3750
3750
3750
3750
3750
5000
5000
3750
1
1
5
5
5
5
5
1
1
1
1
1
1
1
1
1
1
1
1
1
Package
Type
(Page 6)
10
10
10
10
10
10
10
10
42, 43
12, 14
12, 14
12, 14
12, 14
12, 14
12, 14
12, 14
12, 14
12, 14
62
12, 14
12, 14
Features and Comments
Low IF , EN 50130-4
Low IF , EN 50130-4
EN/IEC 60950-1 Supplementary Insulation (0.4mm distance through insulation)
Enhanced isolation voltage
High load current
High load current
Enhanced isolation voltage, high blocking voltage (output pins 7mm separation)
Enhanced isolation voltage
1-Form-B Relays: Dual Single-Pole
Part
Number
Relay
Type
Blocking
Voltage
Load
Current
On
Resistance
CPC2125N
LBB110
LBB120
LBB126
LBB127
PBB150
PBB190
XBB170
BI
BI
BI
BI
BI
BI
BI
BI
(VP)
400
350
250
250
250
250
400
350
(mA)
100
120
170
170
200
250
130
100
(Ω)
35
35
20
15
10
7
25
50
10
BI
Input
Control
Current
(mA)
2
5
5
5
5
5
2
5
Switching
Speeds
ton / toff
(ms)
2/2
3/3
5/5
5/5
5/5
2.5 / 2.5
1 / 2.5
5/5
Isolation
Voltage
Off-State
Leakage
(Vrms)
1500
3750
3750
3750
3750
3750
5000
3750
(μA)
5
1
1
1
1
1
1
1
Package
Type
(Page 6)
Features and Comments
17
20, 21, 22
20, 22
20, 21, 22
20, 21, 22
20, 21, 22
20, 22
20, 21, 22
For data sheets, go to www.ixysic.com/Products/ProdList.htm
IXYS Integrated Circuits − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
BI
• MISCELLANEOUS RELAYS
1-Form-A & 1-Form-B Combination Relays
Relay
Type
CPC2317N
CPC2330N
LBA110
LBA110L
LBA120
LBA120L
LBA127
LBA127L
LBA710
LBA716
PBA150
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
Blocking
Voltage
Load
Current
On
Resistance
(VP)
(mA)
120
120
120
120
170
150
200
150
1000
1000
250
(Ω)
16
30
35
35
20
25
10
15
0.6
0.4
7
60
350
350
350
250
250
250
250
60
60
250
Input
Control
Current
(mA)
1
2
2
5
5
5
5
5
2
2
5
Switching
Speeds
ton / toff
(ms)
3/3
3/3
3/3
3/3
5/5
5/5
5/5
5/5
5/5
5/5
2.5 / 2.5
Isolation
Voltage
(Vrms)
1500
1500
3750
3750
3750
3750
3750
3750
3750
3750
3750
Off-State
Leakage
A/B
(μA)
1/1
1/5
1/1
1/1
1/1
1/1
1/1
1/1
1/1
1/1
1/1
Package
Type
(Page 6)
17
17
20, 21, 22
20, 21, 22
20, 21, 22
20, 22
20, 21, 22
20, 22
20, 22
20, 22
20, 22
Features and Comments
Low IF
Current limiting
Current limiting
Current limiting
High load current
High load current
UNI
1-Form-A Relays: Single-Pole, Unidirectional (DC-only)
Part
Number
Relay
Type
Blocking
Voltage
Load
Current
On
Resistance
CPC1002N
CPC1004N
UNI
UNI
(VP)
60
100
(mA)
700
300
(Ω)
0.55
4
Input
Control
Current
(mA)
2
2
Switching
Speeds
ton / toff
(ms)
5/2
3/1
Isolation
Voltage
Off-State
Leakage
(Vrms)
1500
1500
μA)
1
1
Package
Type
(Page 6)
Features and Comments
EN 50130-4
Extended operating temperature range: -40ºC to +110ºC
10
10
BI
1-Form-A Relays: Single-Pole, Voltage-Controlled
Part
Number
Relay
Type
Blocking
Voltage
Load
Current
On
Resistance
CPC1215
CPC1217
CPC1218
BI
BI
BI
(VP)
400
60
60
(mA)
500
200
600
(Ω)
6
16
1.1
Input
Control
Voltage
(V)
5 - 12
5 - 12
5 - 12
Switching
Speeds
ton / toff
(ms)
5/3
5/5
5/5
Solid State Relays
Part
Number
Isolation
Voltage
Off-State
Leakage
(Vrms)
3750
2500
2500
(μA)
1
1
1
Package
Type
(Page 6)
61
41
41
Features and Comments
Direct drop-in reed relay replacement
EN 50130-4, direct drop-in reed relay replacement
EN 50130-4, direct drop-in reed relay replacement
For data sheets, go to www.ixysic.com/Products/ProdList.htm
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900
11
BI
1-Form-B Relays: Single-Pole, Voltage-Controlled
Part
Number
CPC1219
Relay
Type
BI
Blocking
Voltage
Load
Current
On
Resistance
(VP)
(mA)
60
200
Switching
Speeds
ton / toff
(ms)
Isolation
Voltage
Off-State
Leakage
(Ω)
Input
Control
Voltage
(V)
(Vrms)
(μA)
16
5 - 12
5/5
2500
1
Package
Type
(Page 6)
Features and Comments
41
EN 50130-4, direct drop-in reed relay replacement
BI
2-Form-A Relays: Double-Pole, Single-Throw
Solid State Relays
Part
Number
Relay
Type
Blocking
Voltage
Load
Current
On
Resistance
LCA210
LCA210L
LCA220
BI
BI
BI
(VP)
350
350
250
(mA)
85
85
120
(Ω)
35
35
20
Input
Control
Current
(mA)
8
8
10
Switching
Speeds
ton / toff
(ms)
3/3
4/4
5/5
Isolation
Voltage
Off-State
Leakage
(Vrms)
3750
3750
3750
(μA)
1
1
1
Package
Type
(Page 6)
Features and Comments
20, 22
20, 22
20, 22
Current limiting
BI
1-Form-C Relays: Common Input, Single-Pole, Double-Throw
Part
Number
LCC110
LCC120
12
Relay
Type
Blocking
Voltage
Load
Current
On
Resistance
BI
BI
(VP)
350
250
(mA)
120
170
(Ω)
35
20
Input
Control
Current
(mA)
8
10
Switching
Speeds
ton / toff
(ms)
4/4
5/5
Isolation
Voltage
Off-State
Leakage
(Vrms)
3750
3750
(μA)
1
1
Package
Type
(Page 6)
Features and Comments
20, 21, 22
20, 22
For data sheets, go to www.ixysic.com/Products/ProdList.htm
IXYS Integrated Circuits − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
FAULT PROTECTED RELAYS
• CURRENT LIMITING SSRS WITH VOLTAGE TRIGGERED SHUTDOWN & THERMAL MANAGEMENT
6-Pin Surface Mount
• Active current-limiting circuitry
• Integrated thermal management (ThM)
• Voltage triggered shutdown (VTS)
Power SIP
12
CPC1510
CPC1511
CPC1540
CPC1560
CPC1563
CPC1593
Blocking
Voltage
Input Control
Current
(VP)
250
230
350
60
600
600
On-Resistance
(Maximum)
Load Current
(Maximum)
14
8-Pin DIP
20
Current Limit
(Maximum)
22
* VTS
Threshold
Switching
Speed
DC-Only
AC
DC-Only
AC
DC-Only
AC
(VTH)
(ton / toff)
(Ω)
3.75
6.75
1.4
11.75
11.75
(Ω)
15
4
25
5.6
35
35
(mA)
350
250
600
250
250
(mA)
200
450
120
300
120
120
(mAP)
920
570
1500
570
570
(mAP)
450
1400
285
900
285
285
(V)
100
100
21
(ms)
2/2
4/2
2/2
0.1 / 0.4
2/2
2/2
(mA)
2
2.5
2
1.1
2
2
36
8-Pin Surface Mount
Isolation
Voltage
Package
Type
(Vrms)
3750
3750
3750
3750
3750
3750
12, 14
36
12, 14
20, 22
12, 14
12, 14
Features & Comments
Industrial applications
Industrial applications
PSTN hook switch applications
Fast switching speeds
High blocking voltage
Power supply start-up
* Deactivates the switch when the load voltage exceeds the VTH threshold while the switch is in current limit.
CPC1540, CPC1563, CPC1593
OUT1
Gate Drive
Control
Thermal
Management
Voltage
Triggered
Shutdown
(VTS)
S1
OUT1
OUT2
S2
Applications:
• Telephony hook switch
• VoIP gateways
• I/O subsystems
• Electronic switching
• Medical equipment
(Patient/equipment isolation)
• Security
• Aerospace
• Industrial controls
Voltage Threshold
Voltage Threshold Shutdown Delay
VTH
Voltage Threshold Reactivation Delay
ILMT
Time
ILMT
VTH
S1
S2
Current Through Switch
OUT2
Performance into resistive load.
Line Voltage
For data sheets, go to www.ixysic.com/Products/ProdList.htm
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900
13
Fault Protected Relays
• Provide excellent power-cross immunity
• Ideal for use in electromagnetically noisy environments
• Resumes normal operation after faults are removed
Part Number
66-Pin
Pin DIP
OPTICALLY ISOLATED POWER RELAYS
Optically Isolated Power Relays
•
•
•
•
•
•
Blocking voltage up to 1000VP
On-resistance as low as 0.05 Ohms
On/off times from 1ms to 25ms
MOSFET-based AC/DC and DC-only power relays
elays
Load current up to 22.8ADC (with 5ºC/W heat sink
sink)
2500V rms to 5000Vrms isolation from input to output
and to DCB substrate
Features:
• Isolated, low thermal impedance pad for heat sink applications
• Low input control current
• Low thermal impedances, junction to case (θJCC):
0.30°C/W - ISOPLUS-264
0.35°C/W - i4-PAC
1.50°C/W - Power SIP
1.50°C/W - Power SOIC
Applications:
1-Form-A
Bidirectional
• Robotics
• Medical equipment
• Railroad/traffic controls
• Consumer appliances
• Industrial control
• Test and measurement equipment
66 - Power SOIC
14
1-Form-A
Unidirectional
1-Form-B
Unidirectional
Dual 1-Form-A
Bidirectional
Metallized, external, Direct Copper Bond (DCB) surface
for heat sink applications
36 - Power SIP
29 - i4-PAC
For data sheets, go to www.ixysic.com/Products/ProdList.htm
IXYS Integrated Circuits − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
37 - ISOPLUS-264
• 1-FORM-A POWER RELAYS: SINGLE-POLE - BIDIRECTIONAL
Relay
Type
(VP)
CPC1906Y
CPC1907B
CPC1908J
CPC1909J
CPC1916Y
CPC1918J
CPC1926Y
CPC1927J
CPC1967J
CPC1968J
CPC1973Y
CPC1977J
CPC1978J
CPC1979J
CPC1981Y
CPC1983B
CPC1983Y
CPC1983YE
CPC1984Y
CPC1986J
CPC1988J
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
BI
Load Current
(Arms)
Blocking
Voltage
60
60
60
60
100
100
250
250
400
500
400
600
800
600
1000
600
600
600
600
1000
1000
Without
Heat Sink
2
6
3.5
6.5
2.5
5.25
0.7
2.7
1.35
2
0.35
1.25
0.75
1.4
0.18
0.5
0.5
0.5
1
0.65
0.9
5ºC/W
Heat Sink
8.5
15
13
6.7
3.35
5
3.1
1.85
3.5
1.6
2.25
On
Resistance
Switching
Speeds
ton / toff
(ms)
Isolation
Voltage
Off-State
Leakage
(Vrms)
(μA)
10 / 5
5/1
20 / 5
25 / 10
5/3
25 / 10
10 / 10
25 / 10
20 / 5
20 / 5
5/3
20 / 5
20 / 5
25 / 5
10 / 5
5/2
5/2
5/2
10 / 2
20 / 5
20 / 5
2500
5000
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
5000
2500
4000
4000
2500
2500
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
36
66
29
37
36
37
36
37
29
37
36
29
29
37
36
66
36
36
36
29
37
2.5 / 0.25
4000
1
66
Input
Control
Current
(mA)
Switching
Speeds
ton / toff
(ms)
Isolation
Voltage
Off-State
Leakage
Package
Type
(Page 14)
(Vrms)
(μA)
5
10
10
10
10
10
10
10
10
10
5/2
20 / 5
20 / 5
20 / 5
5/2
20 / 5
20 / 5
20 / 5
20 / 5
20 / 5
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
1
1
1
1
1
1
1
1
1
1
36
29
37
37
36
37
29
37
29
37
2 / 12
2500
1
36
TC=25ºC
(Ω)
Input
Control
Current
(mA)
15
15
15
15
13.15
15
12.25
7.25
14.5
6.5
9.4
0.3
0.06
0.3
0.1
0.34
0.1
1.4
0.2
0.85
0.35
5
1
2.3
0.75
18
6
6
6
0.66
3
2.5
10
5
10
10
10
10
10
10
10
10
10
10
10
10
10
5
5
5
5
10
10
0.15
5
Package
Type
(Page 14)
Features & Comments
Enhanced isolation voltage
Optically Isolated Power Relays
Part Number
Enhanced isolation voltage
Enhanced isolation voltage
Enhanced isolation voltage
• DUAL 1-FORM-A POWER RELAY: BIDIRECTIONAL
CPC2907B
BI
60
2
-
-
DUAL power relay
• 1-FORM-A POWER RELAYS: SINGLE-POLE - UNIDIRECTIONAL
Part Number
Relay
Type
Blocking
Voltage
(VP)
CPC1706Y
CPC1708J
CPC1709J
CPC1718J
CPC1726Y
CPC1727J
CPC1777J
CPC1779J
CPC1786J
CPC1788J
UNI
UNI
UNI
UNI
UNI
UNI
UNI
UNI
UNI
UNI
60
60
60
100
250
250
600
600
1000
1000
Load Current
(A)
Without
Heat Sink
4
4
9
6.75
1
3.4
1.5
1.65
0.65
1
5ºC/W
Heat Sink
11.85
22.8
17.5
8.6
4.6
4.12
1.75
2.45
On
Resistance
TC=25ºC
24
32
32
20
15
15
6.9
10.3
(Ω)
0.09
0.08
0.05
0.075
0.75
0.09
0.5
0.4
2
1.25
Features & Comments
• 1-FORM-B POWER RELAY: SINGLE-POLE - UNIDIRECTIONAL
CPC1705Y
UNI
60
3.25
-
-
0.09
5
For data sheets, go to www.ixysic.com/Products/ProdList.htm
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900
Normally CLOSED power relay
15
OPTICALLY ISOLATED AC POWER SWITCHES
• OPTICALLY ISOLATED AC POWER SWITCHES: LOAD CURRENT ≤1A
Optically Isolated AC Power Switches
• Blocking voltage from 400VP to 800VP
• SCR-based AC power switches
• Maximum load current up to 1Arms
ZC
Features:
Applications:
• Load current up to 1Arms
• Blocking voltage up to 800VP
• 5mA input sensitivity
• Zero-cross turn on ≤ ½ Cycle
• Low EMI and RFI generation
• DC control, AC switching
• Optically isolated
• TTL and CMOS compatible
• High noise immunity
• Machine insertable, wave solderable
Zero-Cross Turn-On
• Programmable controls
• Process control
• Power control panels
• Remote switching
• Gas pump electronics
• Large relay control circuits
• Contactors
• Solenoids
• Motor controls
• Heater controls
4-Pin DIP (16-Pin Body)
Part Number
Blocking
Voltage
Load
Current
(VP)
(Arms)
Input
Control
Current
(mA)
Operating
Frequency
Min / Max
(Hz)
Isolation
Voltage
Package
Type
CPC1943
400
0.5
5
20 - 500
3750
15, 16
CPC1945G
CPC1945Y
CPC1961 Dual
400
400
600
1
1
0.25 1
5
5
20 - 400
20 - 400
3750
3750
2
23
12
(Vrms)
5
20 - 500
3750
20, 22
CPC1963
600
0.5
5
20 - 500
3750
15, 16
CPC1965G
600
1
5
20 - 400
3750
2
CPC1965Y
600
1
5
20 - 400
3750
23
CPC1972
800
0.25
5
20 - 500
3750
12, 14
PD1201
400
1
5
20 - 500
3750
2
PD2401
500
1
5
20 - 500
3750
2
PD2601
600
1
5
20 - 500
3750
2
PM1204
400
0.5
5
20 - 500
3750
15, 16
PM1205
500
0.5
5
20 - 500
3750
15, 16
PM1206
600
0.5
5
20 - 500
3750
15, 16
PS1201
400
1
5
20 - 500
3750
23
PS2401
500
1
5
20 - 500
3750
23
PS2601
600
1
5
20 - 500
3750
23
1
Maximum continuous load current of a single pole or the sum of the load currents with both poles operating simultaneously.
16
2
6-Pin Surface Mount
6-Pin Power DIP
6-Pin DIP
14
15
6-Pin Power DIP Surface Mount
16
8-Pin DIP
20
8-Pin Surface Mount
22
For data sheets, go to www.ixysic.com/Products/ProdList.htm
IXYS Integrated Circuits − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
4-Pin SIP (8-Pin Body)
23
• OPTICALLY ISOLATED AC POWER SWITCHES: LOAD CURRENT >1A
Metallized, external, Direct Copper Bond (DCB) surface
for heat sink applications
29 - i4-PAC
36 - Power SIP
64 - SuperSIP
66 - Power SOIC
turn-on (non-zero-cross)
* Rapid
Rapid turn-on devices turn on when the control input goes true regardless of
the load voltage phase, and turn off when the load current crosses zero.
Part
Number
Blocking
Voltage
(VP)
CPC1964B
800
CPC1964BX6
600
CPC1966Y
600
CPC1966B
800
CPC1966BX8
800
CPC1966YX6
600
CPC1966YX8
800
CPC1976
600
CPC1976YX6
600
CPC1998J
800
CPC40055ST
800
** Typical turn-on values.
Load Current
No
Heat Sink
(Arms)
1.5
1.5
3
3
3
3
3
2
2
5
5
5ºC/W
Heat Sink
(Arms)
20
20
TC=25ºC
(Arms)
50
40
Input
Control
Current
Input
Control
Voltage
Operating
Frequency
Min / Max
(mA)
5
5
5
5
5
5
5
5
5
5
5
(V)
-
(Hz)
20 - 500
20 - 500
20 - 500
20 - 500
20 - 500
20 - 500
20 - 500
20 - 500
20 - 500
20 - 500
20 - 500
Turn-On:
Zero-Cross
or
Rapid
Zero-cross
Rapid
Zero-cross
Zero-cross
Rapid
Rapid
Rapid
Zero-cross
Rapid
Zero-cross
Zero-cross
*
*
*
*
*
Switching
Speed
ton / toff
Isolation
Voltage
Package
Type
(max)
½ Cycle
500μs / ½ Cycle
½ Cycle
½ Cycle
**45μs / ½ Cycle
500μs / ½ Cycle
**45μs / ½ Cycle
½ Cycle
500μs / ½ Cycle
½ Cycle
½ Cycle
(Vrms)
5000
5000
3750
5000
3750
3750
3750
3750
3750
2500
2500
66
66
36
66
66
36
36
36
36
29
64
For data sheets, go to www.ixysic.com/Products/ProdList.htm
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900
Features
Enhanced isolation voltage, 12.5mm creepage
Rapid turn-on, enhanced isolation voltage
Enhanced isolation voltage, 12.5mm creepage
Rapid turn-on, 5.7mm creepage
Rapid turn-on
Rapid turn-on
Rapid turn-on
High load current
High load current, 9.5mm creepage
17
Optically Isolated AC Power Switches
• Blocking voltages of 600VP and 800V P
• SCR-based AC power switches
• Zero-cross and Rapid turn-on (non-zero-cross) versions
MULTIFUNCTION PRODUCTS: SSR/OPTOCOUPLERS
• GENERAL PURPOSE MULTIFUNCTION PRODUCTS (TELECOM MULTIFUNCTION PRODUCTS - PAGE 41)
Multifunction Products: SSR/Optocouplers
The OptoMOS line of Multifunction Products combines a number of discrete, optically isolated functions into a single package. These products mix and match solid state
relays, optocouplers, and Darlington transistors to create highly functional circuits in a single, small package. Multifunction devices allow designers to consolidate circuit
functions into a single device, thus freeing up valuable board space and reducing component count.
Features:
• 3750Vrms input-to-output isolation
• Multiple functionality in a single package
• Current limiting (part numbers with “L” suffix)
• Machine insertable, wave solderable
• TTL and CMOS compatible
Applications:
• Telecommunication/datacommunication
• Instrumentation
• I/O subsystems/electronic switching
• Medical equipment (patient/equipment isolation)
• Security
• Aerospace
• Industrial controls
4
20
21
22
16-Pin Low-Profile SOIC
8-Pin DIP
8-Pin Flatpack
8-Pin Surface Mount
A
B
E
Part
Number
IAA110
IAB110
IAD110
IBB110
TS117
TS117L
TS118
TS120
TS190
TS190L
XS170
18
Style
B
C
A
D
E
E
F
G
E
E
E
SSR Characteristics
Blocking
Voltage
Load
Current
On
Resistance
(VP)
350
350
350
350
350
350
350
350
400
400
350
(mA)
100
100
100
100
120
120
120
120
150
150
100
(Ω)
35
35
35
35
35
35
35
35
22
25
50
Optocoupler Characteristics
Input
Control
Current
(mA)
5
5
5
5
2
2
5
5
5
5
2
Breakdown
Voltage
(V)
20
20
20
20
20
20
20
20
20
20
20
Current
Transfer
Ratio
(%)
33
33
33
33
33
33
33
300
33
33
33
Saturation
Voltage
(V)
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.8
0.5
0.5
0.5
Input
Control
Current
(mA)
6
6
6
6
6
6
6
2
6
6
6
Isolation
Voltage
C
F
D
G
Package
Type
Features and Comments
4
4
4
4
20, 21, 22
20, 21, 22
20, 21, 22
20, 21, 22
20, 21, 22
21
20, 22
Two 1-Form-A relays, one optocoupler
One 1-Form-A relay, one 1-Form-B relay, one optocoupler
One 1-Form-A relay, two optocouplers
Two 1-Form-B relays, one optocoupler
One 1-Form-A relay, one optocoupler
One current-limiting 1-Form-A relay, one optocoupler
One 1-Form-B relay, one optocoupler
One 1-Form-A relay, one Darlington optocoupler
One 1-Form-A relay, one optocoupler
One current-limiting 1-Form-A relay, one optocoupler
One 1-Form-A relay, one optocoupler
(Vrms)
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
3750
For data sheets, go to www.ixysic.com/Products/ProdList.htm
IXYS Integrated Circuits − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
FIELD EFFECT TRANSISTORS
SOT-223
• N-CHANNEL DEPLETION MODE FETS
SOT-89
Normally closed MOSFETs present low resistance with no power applied
Ideal for security applications
IGBT speed enhancement
LED drivers
SOT-23
V(BR)DSX
ID
RDS(on)
VGS(off)
VGS(off)
(V)
Min (mA)
Max (Ω)
Min (V)
Max (V)
CPC3701
60
600
1
-1.4
-3.1
SOT-89
CPC3703
250
360
4
-1.6
-3.9
SOT-89
CPC3708
350
130
14
-2
-3.6
SOT-89, SOT-223
CPC3710
250
220
10
-1.6
-3.9
SOT-89
CPC3714
350
240
14
-1.6
-3.9
SOT-89
CPC3720
350
130
22
-1.6
-3.9
SOT-89
CPC3730
350
140
35
-1.6
-3.9
SOT-89
CPC3902
250
400
2.5
-1.4
-3.1
SOT-223
CPC3909
400
300
6
-1.4
-3.1
SOT-89, SOT-223
CPC3960
600
100
44
-1.4
-3.1
SOT-223
CPC3980
800
100
45
-1.4
-3.1
SOT-223
CPC3982
800
20
380
-1.4
-3.1
SOT-23
Very small package
CPC5602
350
130
14
-2
-3.6
SOT-223
Designed for use with LITELINK designs
CPC5603
415
130
14
-2
-3.6
SOT-223
Designed for use with LITELINK designs
Part Number
Package Type
Features:
• Normally closed depletion mode devices offer low RDS(on) at cold temperatures
• Low on-resistance
• High input impedance
• Low VGS(off) voltage
Applications:
• Power fail switches
• Discrete normally closed relays
• Constant current, high brightness LED drivers
• High voltage pre-regulators
• Power inverters
• Power supplies
Features & Comments
Field Effect Transistors
•
•
•
•
N-Channel Depletion Mode MOSFET
as Pre-Regulator
Voltage
Regulator
VAC
VDC
See Application Note AN-500
“Depletion-Mode Power MOSFETs and Applications”
For data sheets, go to www.ixysic.com/Products/ProdList.htm
+1 978 524 6700,
+1 978 524 4700 − Customer Service
+1 978 524 6768,
+1 978 524 4900
19
IGBT & MOSFET GATE DRIVERS
• LOW-SIDE GATE DRIVERS
IGBT & MOSFET Gate Drivers
Part
Number
Output
Type
IX4426
IX4427
IX4428
IXD_602
IX4423
IX4424
IX4425
IXD_604
IX4340
IXD_609
IXD_614
IXD_630
IXD_630M
DUAL
DUAL
DUAL
DUAL
DUAL
DUAL
DUAL
DUAL
DUAL
SINGLE
SINGLE
SINGLE
SINGLE
IPEAK
TC=25ºC
(AP)
1.5
1.5
1.5
2
3
3
3
4
5
9
14
30
30
Output
Resistance
(Ω)
8
8
8
4
4
4
4
2.5
1.5
1
0.8
0.4
0.4
Available
Logic
Configurations
I
N
F
F, I, N
I
N
F
F, I, N, D
D
I, N, D
I, N, D
I, N, D
I, N, D
Enable
Function
•
•
•
•
•
•
Under-voltage
Lockout
(V)
VCC < 3.8
VCC < 12.5
VCC < 9
Available
Logic
Configurations
Enable
Function
Package
Type
Package Type
IXD_604SI & SIA
IXD_609SI
IXD_614SI
IX4340NE
are AEC-Q100 qualified!
Features:
54, 56
54, 56
54, 56
20, 53, 54, 56
54
54
54
20, 53, 54, 56
53, 54, 92
20, 53, 54, 56, 57, 58
20, 53, 57, 58
57, 58
57, 58
• 1.5A to 30A peak source/sink drive current
• Wide operating voltage range
• -40°C to +125°C extended operating temperature range
• Logic input withstands negative swing of up to -5V
• Matched rise and fall times
• Low propagation delay time
• Low output impedance
Applications:
• Efficient power MOSFET and IGBT switching
• Switch mode power supplies
• Motor controls
• DC to DC converters
• Class-D switching amplifiers
• Pulse transformer driver
AEC-Q100 Qualified Low-Side Gate Drivers
Part
Number
Output
Type
IPEAK
TC=25ºC
(AP)
Output
Resistance
(Ω)
IXD_604SI
DUAL
4
2.5
F, I, N, D
•
53
IXD_604SIA
DUAL
4
2.5
F, I, N, D
•
54
IX4340NE
DUAL
5
1.5
D
•
53
IXD_609SI
SINGLE
9
1
I, N, D
•
53
IXD_614SI
SINGLE
14
0.8
I, N, D
•
53
8-Pin DIP
5-Pin TO-220
20
57
8-Pin Power SOIC
53
8-Pin SOIC
ENA
INA
A
OUTA
INA
A
OUTA
INA
A
OUTA
INA
54
A
OUTA
B
OUTB
ENB
8-Pin DFN
INB
B
OUTB
INB
F
OUTB
INB
I
IN
20
B
B
OUTB
N
OUT
IN
INB
EN
OUT
IN
56
D
5-Pin TO-263
58
8-Pin MSOP
92
OUT
For data sheets, go to www.ixysic.com/Products/ProdList.htm
IXYS Integrated Circuits − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
• IX2113: 600V HIGH-SIDE & LOW-SIDE GATE DRIVER
• High-side channel can drive an N-channel power MOSFET or IGBT 600V from the common reference
• Configured with independent high-side and low-side referenced output channels
IX2113
VDD
SD
Input Control Logic
&
Cycle-by-Cycle
Edge-Triggered
Shutdown
Pulse
Generator
High
Voltage
Level
Shift
LIN
VSS
UVLO
R
S
R
Q
Buffer
HO
VS
VCC
UVLO
Level
Shift
VDD / VCC
VSS / COM
Features:
VB
LS Delay
Control
Buffer
• Floating channel for bootstrap operation up to 600V with an
absolute maximum rating of 700V
• Outputs capable of sourcing and sinking 2A
• Gate drive supply range from 10V to 20V
• Tolerant to negative voltage transients: dV/dt immune
• 3.3V logic compatible
• Under-voltage lockout for both high-side and low-side outputs
• Matched propagation delays
IGBT & MOSFET Gate Drivers
HIN
Level
Shift
VDD / VCC
VSS / COM
LO
COM
• IX21844: HIGH VOLTAGE HALF-BRIDGE GATE DRIVER
• Programmable dead-time can be set between 400ns and 5μs
• Floating high-side channel can drive an N-channel power MOSFET or IGBT 600V from the common reference
Features:
• Floating channel for bootstrap operation to 600V with
an absolute maximum rating of 700V
• Outputs can source 1.4A and sink 1.8A
• Gate drive supply range from 10V to 20V
• Tolerant to negative voltage transients: dV/dt immune
• 3.3V and 5V logic compatible
• Under-voltage lockout for both high-side and low-side outputs
• Matched propagation delays
IX21844 Typical Application
VCC
HO
IN
IN
VS
SD
SD
VCC
up to 600V
VB
LOAD
DT
Applications:
• Switch mode power supplies
• Motor driver inverters
• DC/DC converters
• Uninterruptable power supplies (UPS)
RDT
VSS
COM
VSS
LO
For data sheets, go to www.ixysic.com/Products/ProdList.htm
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900
21
• IX2120: 1200V HIGH AND LOW SIDE GATE DRIVER
• Floating channel for bootstrap operation to +1200V
• Outputs capable of sourcing and sinking 2A
IX2120 Functional Block Diagram
VB
Features:
• Gate drive supply range from 15V to 20V
• Enhanced robustness due to SOI process
• Tolerant to negative voltage transients: dV/dt immune
• 3.3V logic compatible
• Undervoltage lockout for both high-side and low-side outputs
VDD
HIN
IGBT & MOSFET Gate Drivers
SD
LIN
Input Control
Logic
&
Cycle-by-Cycle
Edge-Triggered
Shutdown
Level
Shift
VDD / VCC
VSS / COM
VSS
Pulse
Generator
Mid
Voltage
Level
Shift
High
Voltage
Level
Shift
UVLO
R
S
C
Q
Buffer
HO
VS
VBM
VSM
UVLO
Level
Shift
VDD / VCC
VSS / COM
LS Delay
Control
VCC
Buffer
LO
COM
22
For data sheets, go to www.ixysic.com/Products/ProdList.htm
IXYS Integrated Circuits − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
• IX3120: 2.5A OUTPUT OPTICALLY COUPLED GATE DRIVER
IX3120
• 2.5A maximum peak output current
• Wide operating voltage range: 15V to 30V
Features:
• 25kV/µs minimum common-mode rejection (CMR) at 1500VCM
• Under-voltage lockout with hysteresis
• 3750Vrms input-to-output isolation
• Wide temperature range: -40°C to +100°C
N/C
1
8
VCC
ANODE
2
7
VO
CATHODE
3
6
VO
N/C
4
5
VEE
• Isolated IGBT/MOSFET gate drive
• Switch mode power supplies
• Industrial inverters
• Motor drivers
Ideally suited for use in motor control and inverter applications due to its low input
LED current, high output peak current, and high noise immunity (25kV/μs).
• IX3180: 2.5A OUTPUT HI SPEED GATE DRIVER OPTOCOUPLER
• 2.5A maximum peak output current
• Wide operating voltage range: 10V to 20V
IGBT & MOSFET Gate Drivers
Applications:
IX3180
N/C
1
8
VCC
ANODE
2
7
VO
CATHODE
3
6
VO
N/C
4
5
VEE
Features:
• 200ns maximum propagation delay over temperature range
• 20ns typical pulse width distortion
• 10kV/µs minimum common-mode rejection (CMR) at 1500VCM
• Wide operating voltage range: 10V to 20V
• Under-voltage lockout with hysteresis
• 3750Vrms input-to-output isolation
• Wide temperature range: -40°C to +100°C
Applications:
• High performance DC/DC converters
• High performance switching power supplies
• Motor control inverter applications
• Motor drivers
For data sheets, go to www.ixysic.com/Products/ProdList.htm
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900
23
• IX332B: 2.5 AMP OUTPUT CURRENT IGBT GATE DRIVER OPTOCOUPLER
The IX332B is an advanced 2.5A output current, optically isolated, IGBT gate driver that integrates VCEdesaturation detection, UVLO fault status feedback, and active
Miller clamping.
The IX332B is constructed as a power optocoupler with 4250Vrms isolation between the control input and power output stages. In addition, an optically isolated, opencollector feedback circuit relays FAULT status to the controller. Both optical isolation circuits employ highly efficient infrared LEDs.
Featuring soft IGBT turn-off, isolated fault feedback, under voltage lock-out with hysteresis, active Miller clamping, and VCE desaturation detection, the IX332B offers
engineers design flexibility and maximum circuit protection.
Features:
IGBT & MOSFET Gate Drivers
• Under Voltage Lock-Out Protection (UVLO) with Hysteresis
• Floating outputs for parallel or series configuration
• Desaturation Detection
• “Soft” IGBT Turn-off
• Miller Clamping
• Open Collector Isolated fault feedback
VCC2
11
14
VOUT
UVLO
ANODE
6,7
DRIVER
NEW
Applications:
13
!
CATHODE
5,8
DESAT
DESAT
9,12 V
EE
VCLAMP
• Isolated IGBT/Power MOSFET gate driver
VCLAMP
VE
3
FAULT
VS
10
16
2
VCC1
1,4
15
VLED
• OPTICALLY ISOLATED PHOTOVOLTAIC GATE DRIVERS
• Dual optically isolated photovoltaic devices
• Well suited for use in discrete solid state relay designs
8-Pin DIP
Features:
Input
PV
Output
Input
PV
Output
8-Pin Surface Mount
• Isolated 5.5V to 12V photovoltaic output
• Floating outputs for parallel or series configuration
Applications:
Part Number
FDA215
FDA217
24
Input Control Current
(mA)
5
5
• MOSFET driver
• Isolated floating power source
Nominal Open-Circuit
Voltage VOC (V)
5.5
11.75
Nominal Short-Circuit
Current ISC (μA)
2.5
4.5
Switching Speeds
ton / toff (ms)
5/5
2 / 0.5
Isolation Voltage
(Vrms)
3750
3750
For data sheets, go to www.ixysic.com/Products/ProdList.htm
IXYS Integrated Circuits − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
Package Type
8-pin DIP, 8-pin surface mount
8-pin DIP, 8-pin surface mount
• OPTICALLY ISOLATED LOAD-BIASED GATE DRIVERS
• High speed, optically isolated gate driver ICs
• Output driver powered from load voltage; no external power supply required
• On-chip circuitry charges an external capacitor whose charge enables fast turn-on
Features:
CPC1590 Application Diagram
1
4
7 A
NC
• No external IC power supply
• Low drive power requirements (TTL/CMOS compatible)
• Load voltages up to 200V
• Fast switching times - 40μsec on, 400μsec off
CAP
LOAD
NC
+VLOAD
8-Pin Flatpack
CST
RLED
Applications:
• Instrumentation
• Multiplexers
• I/O subsystems
• Meters (Watt-Hour, water, gas)
• Medical equipment (patient/equipment isolation)
• Security
• Aerospace
• Industrial controls
5 G
2
3
Part Number
CPC1580
CPC1590
6 B
Input Control Current
(mA)
2.5
2.5
-VLOAD
Gate Voltage @ IF=5mA
(VG)
7.5 - 12
7.5 - 12
IGBT & MOSFET Gate Drivers
8
VIN
Blocking Voltage
(VP)
65
200
Regulated Capacitor Voltage
(VCAP-MAX)
VDS - 0.2V
16
Switching Speeds
ton / toff (μs)
40 / 400
40 / 400
Isolation Voltage
(Vrms)
3750
3750
• CPC1596: 570V OPTICALLY ISOLATED LOAD-BIASED GATE DRIVER
Features:
• Requires No Load-side Power Supply
• Drives External Power MOSFET
• Only 2.5mA Input LED Current to Drive External MOSFET
• 3750Vrms Input-to-Output Isolation
Applications:
Optically Isolated AC or DC Relays for:
• Industrial Controls
• Instrumentation
• Medical Equipment Isolation
• Electronic Switching
• I/O Subsystems
• Appliances
CPC1596
1
4
C 7
NC
A 8
NC
NEW
CST
!
G 5
Q1
LOAD
+ VLOAD
2 LED+
3
Q2
B 6
LED-
+ VLOAD
CPC1596 AC Application Circuit
For data sheets, go to www.ixysic.com/Products/ProdList.htm
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900
25
HIGH VOLTAGE PRODUCTS
• HIGH VOLTAGE ANALOG SWITCH ARRAYS
Features:
Applications:
• Flexible high voltage supplies up to VPP - VNN=200V
• Output switch on-resistance typically 20Ω
• Low charge injection, low capacitance analog switches
High Voltage Products
Part
Number
Number of
Channels
Channel
On-Resistance
(Ω)
Bleed
Resistors
(kΩ)
Clock
Frequency
(MHz)
Turn-On
Time
(μs)
Turn-Off
Time
(μs)
Package
Type
CPC7220
8
20
-
5
5
5
50
CPC7232
CPC7601
CPC7701
8
16
16
21
25
25
20 - 50
20 - 50
5
8
8
5
5
5
5
5
5
50
50
50
CPC7220
8-BIT
SHIFT
REGISTER
DIN
DOUT
LATCHES
LEVEL
SHIFTERS
LATCHES
LEVEL
SHIFTERS
VPP
SW0
DOUT
DIN
DOUT
D
LE
CL
SW0
D
LE
CL
SW2
L4
D
LE
CL
CLK
D
LE
CL
SW3
D
LE
CL
SW4
SW6
L7
D
LE
CL
D
LE
CL
SW7
VNN
LEVEL
SHIFTERS
CPC7701
16-BIT
SHIFT
REGISTER
SWITCHES
L0
D
LE
CL
LEVEL
SHIFTERS
VPP
OUTPUT
SWITCHES
DIN
SW0
DOUT
D
LE
CL
SW0
D
LE
CL
SW1
D
LE
CL
SW2
D
LE
CL
SW3
D
LE
CL
SW4
D
LE
CL
SW5
D
LE
CL
SW6
D
LE
CL
SW15
SW1
L2
D
LE
CL
SW2
CLK
SW3
SW4
L5
D
LE
CL
SW5
L6
D
LE
CL
SW6
L15
D
LE
CL
SW6
LATCHES
VPP
SW5
D
LE
CL
LE
LATCHES
L4
D
LE
CL
SW5
L6
D
LE
CL
50
L3
D
LE
CL
SW2
D
LE
CL
SW4
L5
D
LE
CL
SW1
CLK
SW3
48-Pin LQFP
L1
D
LE
CL
SW1
L2
D
LE
CL
• Piezoelectric transducer drivers
• Ultrasound imaging
• Printers
• Industrial controls and measurement
CPC7601
16-BIT
SHIFT
REGISTER
OUTPUT
SWITCHES
DIN
L0
D
LE
CL
L3
D
LE
CL
CL
CPC7232
8-BIT
SHIFT
REGISTER
SWITCHES
VPP
L1
D
LE
CL
CLK
• Very low quiescent current: 30nA typical
• -58dB off-isolation at 5MHz
• Internal bleed resistors: CPC7232 & CPC7701
SW15
VNN
CL
LE
D
LE
CL
8 Switches
SW7
CL
LE
VNN
RGND
16 Switches
CL
LE
VNN
26
For data sheets, go to www.ixysic.com/Products/ProdList.htm
IXYS Integrated Circuits − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
RGND
• HIGH VOLTAGE ISOLATED ANALOG SWITCHES
CPC7524: 600V Quad High Voltage Isolated Analog Switch Array
• Provides flexible single-ended or differential access to high voltage networks
• Configured as two sets of matched, paired switches for improved differential performance
Applications:
• Switch voltage up to 600V
• 110dB switch-to-switch isolation at 5kHz
• Flexible switch configurations
• Smart logic for power-up/hot-plug state control
• 3.3V operation with very low power consumption
• Switch current limiting and thermal shutdown
protect against fault conditions
• TTL logic-level inputs
• Input latch
• Matched RON
• Clean, bounce-free switching
• Monolithic IC reliability
• 28-pin SOIC package
• Instrumentation
• Industrial controls and monitoring
• Automatic test equipment (ATE)
• Battery monitoring and charging circuits
• Worldwide AC mains monitor
High Voltage Products
28-Pin SOIC
Features:
CPC7524
VDD = 3.3V
S1*
S1A
S2*
CHANNEL 1-2
S2A
IN1
IN2
LATCH1-2
S1B
S2B
L
A
T
C
H
1-2
Channel 1-2
S1
Switch
Control
Logic
S2
TSD1-2
* ±600V
S3*
S3A
CHANNEL 3-4
S4*
S4A
IN3
IN4
LATCH3-4
S3B
S4B
L
A
T
C
H
3-4
Channel 3-4
S3
Switch
Control
Logic
S4
TSD3-4
DGND
GND2
For data sheets, go to www.ixysic.com/Products/ProdList.htm
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900
27
CPC7514: 320V Quad High Voltage Isolated Analog Switch Array
• Provides single-ended or differential access to high voltage networks
• Self-biasing - no external high-voltage supplies required
High Voltage Products
Features:
Applications:
• Low, matched RON
• Switch voltage up to ±320V
• 320V logic-input-to-switch-output isolation
• 110dB switch-to-switch isolation at 5kHz
• Flexible switch configurations
• Smart logic for power-up/hot-plug state control
• 3.3V operation with very low power consumption
• Switch current limiting protects against fault conditions
• Thermal shutdown protects against fault conditions
• Latched TTL logic level inputs
• Clean, bounce-free switching
• Monolithic IC reliability
• Instrumentation
• Industrial controls and monitoring
• Automatic test equipment (ATE)
• Battery charging circuits
• Telephony
VoIP gateways
Central office (CO) and remote terminal (RT)
Concentrators
PBX systems
Optical network terminals (ONT)
Optical network units (ONU)
Hybrid fiber coax (HFC)
20-Pin SOIC
CPC7514
VDD = 3.3V
S 1*
S1A
S2A
IN1
IN2
LATCH1
TSD1
S2 *
Channel 1-2
S1B
S2B
L
A
T
C
H
1
Channel 1-2
Switch
Control
Logic
S1
S2
* ±320V
S 3*
S3A
Channel 3-4
S4A
IN3
IN4
LATCH2
TSD2
28
S4 *
S3B
S4B
L
A
T
C
H
2
Channel 3-4
Switch
Control
Logic
S3
S4
For data sheets, go to www.ixysic.com/Products/ProdList.htm
IXYS Integrated Circuits − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
CPC7512: 320V Dual Shunt-Isolated High Voltage High Frequency Analog Switch
• Provides single-ended or differential access to high voltage networks
• Self-biasing: no external high-voltage supplies required
CPC7512
SW1A
S1A
Features:
Applications:
• Low, matched RON
• Guaranteed break-before-make (BBM)
• Switch voltage up to ±320V
• 60dB off-isolation at 1MHz
• Smart logic for power-up/hot-plug state control
• 5V operation with very low power consumption
• Thermal shutdown protects against fault conditions
• Latched TTL logic level inputs
• Instrumentation
• Industrial controls and monitoring
• Multiplexed ultrasonic transducer switching
• Automatic test equipment (ATE)
• Battery monitoring and charging
SW1B
S1B
SW1C
S1COM
L
A
T
C
H
S1Sel0
S1Sel1
S1C
Switch 1
Control
Logic
LATCH1
TSD
SW2A
SW2B
S2A
S2B
S2COM
20-Pin SOIC
S2C
L
A
T
C
H
S2Sel0
S2Sel1
Switch 2
Control
Logic
LATCH2
Open
A
VS
Insertion Loss =
V
+20 log S
VM
A
VS
B
50Ω
C
+
VM
Open Circuit =
V
+20 log M
VS
A
VS
B
C
50Ω
B
C
Crosstalk =
VM
+
VM
+20 log
VS
Open
A
B
C
Insertion Loss Into 50Ω
Open Circuit Transfer Gain into 50Ω
Transfer Gain (dB)
Loss (dB)
2
4
6
8
-20
-20
-60
-80
-100
-120
10
1kHz
0
-40
100kHz
1MHz
10MHz
Frequency
100MHz
1GHz
1.0E+03
-40
-60
-80
-100
-120
-140
10kHz
+
VM
Crosstalk into 50Ω
0
Transfer Gain (dB)
0
50Ω
-140
1.0E+04
1.0E+05
1.0E+06
1.0E+07
1.0E+08
1kHz
10kHz
Frequency (Hz)
For data sheets, go to www.ixysic.com/Products/ProdList.htm
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900
100kHz
1MHz
10MHz
100MHz
Frequency
29
High Voltage Products
SW2C
HIGH SPEED DIGITAL OPTICAL ISOLATORS
• OPTICALLY ISOLATED I²C BUS REPEATERS: CPC5902 & CPC5903
High Speed Digital Optical Isolators
•
•
•
•
CPC5902 bidirectionally buffers clock and data signals
CPC5903 bidirectionally buffers data signal, unidirectionally buffers clock signal
Logic level translation for levels as low as 2.7V or as high as 5.5V
Passes DC signals - no refresh clock needed - no clock noise generated
CPC5902 Features:
CPC5903 Features:
• Bidirectionally buffers both I2C signals
• Extends and isolates I2C interfaces
• Supports standard and fast mode I2C (400kbps)
• Side B fast-mode compliant: VDDB > 4.5V
• Supports I2C clock stretching
• No internal clock - low EM & RF generation
• Operates on 2.7V to 5.5V
• Supports DC logic level buffering without refresh
• Glitch-free operation
• Power down to Hi-Z does not load I2C bus
• Slew-limited drivers reduce EMI
• Immune to external EMI & RF emissions
• High voltage isolation
• Bidirectionally buffers SDA I2C signal
• Side A extends and isolates I2C interfaces
• Standard-mode and fast-mode I2C
• Side B fast-mode compliant: VDDB > 4.5V
• Operates on 2.7V to 5.5V
• No internal clock - low EM & RF generation
• Voltage level translation
• Slew-limited drivers reduce EMI
• Power down to Hi-Z does not load I2C bus
• 3750Vrms galvanic isolation
• Immune to external EMI & RF emissions
• High voltage isolation
CPC5902
VDDA
I2C
Master
30
I2C
Slave
CPC5902
GNDA
VDDB VDDB
Optical
Isolation
Barrier
VDDA VDDA
VDDB
SCL_A
SDA_A
• Power-over-Ethernet (POE)
• I2C bus length extender
• Isolated control and signal monitoring
• Power supply high-side interface
• I2C logic level translation
CPC5903
Optical
al
Isolation
Barrier
VDDA VDDA
S
“Op ee Appl
tical
i
ly Is cation N
olati
ng a ote TB-1
n I 2C
01
Inter
face
Applications:
”
GNDB
VDDA
SCL_B
SCL_A
SDA_B
SDA_A
I2C
Master
I2C
Slave
I2C
Master
I2C
Slave
VDDB VDDB
VDDB
SCL_B
CPC5903
GNDA
For data sheets, go to www.ixysic.com/Products/ProdList.htm
IXYS Integrated Circuits − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
GNDB
SDA_B
I2C
Slave
I2C
Slave
• SINGLE-CHANNEL EACH DIRECTION DIGITAL OPTICAL ISOLATOR: CPC5001
CPC5001
VDDB
1
INA1
8
VDDA
VDDB
LED
VDDB
2
GNDA
B
A
VDDA
B
7
OUTB1
6
GNDB
5
INB2
CHANNEL1
Features:
Applications:
• Isolates one signal in each direction
• Operates from 2.7V to 5.5V
• Buffered inputs - no external LED drive required
• Hysteresis at inputs for noise rejection
• Slew-limited drivers reduce EMI
• 3750Vrms galvanic isolation from input to output
• Power down to Hi-Z does not load outputs
• 5 Mbaud data rate
• Isolated signal monitoring and control
• Power-over-Ethernet, POE
• Power supply high-side interface
• Logic level translation
• Microprocessor system interface
• Inter integrated circuit (I2C) interface
• Serial peripheral interface
• Full duplex communication
• Isolated line receiver
• Isolated data acquisition systems
CHANNEL2
3
OUTA2
A
VDDB
B
VDDA
4
VDDA
LED
A
• DUAL HIGH SPEED DIGITAL OPTICAL ISOLATOR: CPC5002
CPC5002
• 3750Vrms galvanic isolation from input to output
• Passes DC signals - no refresh clock needed
Features:
Applications:
• Dual optics isolate two signals
• 10 Mbaud data rate
• Operates over 2.7V < VDD < 5.5V
• Power down to Hi-Z does not load outputs
• Low-power CMOS reduces supply current
• LED drive current only 1.5mA
• High speed: 10Mbaud typical
• Isolated line receiver
• Ground loop elimination
• ADC/DAC digital noise isolation
• 4-wire I2C bus isolation
ANO1
1
8
VDD
LED
2
7
3
6
CAT1
CAT2
OUT1
OUT2
LED
4
ANO2
For data sheets, go to www.ixysic.com/Products/ProdList.htm
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900
5
GND
31
High Speed Digital Optical Isolators
• Logic level translation for levels as low as 2.7V or as high as 5.5V
• Passes DC signals - no refresh clock needed
OPTOCOUPLERS
• SINGLE & DUAL OPTOCOUPLERS
• Single-transistor output or Darlington transistor output for higher current gain
• Single-LED for unidirectional input signal or dual-LED input for bidirectional input signal
• Input-to-output isolation: 1500Vrms, 3750Vrms, or 5000Vrms
Features:
• AC and DC compatible inputs
• Machine insertable, wave solderable
10
4-Pin SOP
12
6-Pin Surface Mount
6-Pin DIP
14
4
88-Pin
Pin DIP
20
Applications:
Part
Number
22
8-Pin Surface Mount
42
Minimum
Breakdown
Voltage
(BVCEO)
30
350
350
30
30
30
30
30
30
Typical
Current Transfer
Ratio
(%)
330
5500
5500
1000
300
300
350
8500
8500
Maximum
Saturation
Voltage
(V)
0.3
1.2
1.2
0.5
0.5
0.5
0.5
1
1
Input
Control
Current
(mA)
0.2
1
1
0.2
1
1
1
1
1
Minimum
Isolation
Voltage
(Vrms)
1500
5000
3750
5000
3750
3750
3750
3750
3750
Package
Type
Configuration
10
42, 43
20, 22
42, 43
12, 14
12, 14
12, 14
12, 14
12, 14
A
B
I
A
E
C
C
F
D
LDA200
30
300
0.5
1
3750
20, 22
L
LDA201
LDA202
LDA203
LDA210
LDA211
LDA212
LDA213
30
30
30
30
30
30
30
300
300
300
8500
8500
8500
8500
0.5
0.5
0.5
1
1
1
1
1
1
1
1
1
1
1
3750
3750
3750
3750
3750
3750
3750
20, 22
20, 22
20, 22
20, 22
20, 22
20, 22
20, 22
K
H
G
N
M
J
I
CPC1001N
CPC1301
CPC1302
CPC1303
LDA100
LDA101
LDA102
LDA110
LDA111
32
4-Pin DIP
43
3
4-Pin Surface Mount
A
B
4-Pin Package
Configurations
Optocouplers
• Modem switching (laptops, notebooks, PDAs)
• Voltage detection
• TIP/RING circuits
• Ringing detection
• Loop detection
• Current sensing
• Telecom switching
C
D
E
F
6-Pin Package
G
H
I
J
K
L
M
N
For data sheets, go to www.ixysic.com/Products/ProdList.htm
IXYS Integrated Circuits − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
8-Pin Package
• LINEAR OPTOCOUPLERS
• Input LED drives two photodiodes: (1) isolated output (2) feedback to correct for the input LED’s non-linearity
Features:
Applications:
• Couples analog & digital signals
• 3750Vrms input-to-output isolation
• Bandwidth >200kHz in photoconductive mode
• Bandwidth 40kHz in photovoltaic mode
• High gain stability
• Low input-to-output capacitance
• Low power consumption
• 0.01% servo linearity
• THD 87dB typical
• Power supply feedback voltage/current
• Medical sensor interfacing
• Isolation of process control transducers
• Isolated 4-20mA converters
• Telephony isolation
16-Pin SOIC
4
8-Pin DIP
Servo Gain
K1=I1/IF
(Min - Max)
Forward Gain
K2=I2/IF
(Min - Max)
Transfer Gain
K3=K2/K1
(Min - Max)
Input Control
Current
(mA)
Isolation
Voltage
(Vrms)
Package
Type
LOC110
0.004 - 0.03
0.004 - 0.03
0.668 - 1.179
2 - 10
3750
20, 21, 22
LOC111
LOC112
LOC117
LOC210
LOC211
0.008 - 0.03
0.004 - 0.03
0.008 - 0.03
0.004 - 0.03
0.008 - 0.03
0.006 - 0.03
0.004 - 0.03
0.006 - 0.03
0.004 - 0.03
0.006 - 0.03
0.733 - 1.072
0.733 - 1.072
0.887 - 1.072
0.773 - 1.072
0.773 - 1.072
2 - 10
2 - 10
2 - 10
2 - 10
2 - 10
3750
3750
3750
3750
3750
20, 21, 22
20, 21, 22
20, 21, 22
4
4
Photovoltaic Mode:
• 14-bit linearity
• 40kHz bandwidth
20
LOC21x
– LED
– LED
+ LED
+ LED
C1
C2
C1
A1
A2
A1
8-Pin Flatpack
C2
A2
21
– LED
+ LED
C2
C1
A2
A1
8-Pin Surface Mount
22
Isolation Amplifier (Photovoltaic Mode)
Two fundamental
operating configurations:
Photoconductive Mode:
• Wide bandwidth (>200kHz)
• 8-bit linearity
LOC11x
Optocouplers
Part
Number
VCC
VIN
LOC110, LOC111
LOC112, or LOC117
IF
–
+
I1
1
8
2
7
3
6
–
5
+
I2 = K3I1
VOUT
4
For data sheets, go to www.ixysic.com/Products/ProdList.htm
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900
33
LIGHTING & DISPLAY PRODUCTS
• HIGH VOLTAGE LED DRIVERS
IX9907
Block Diagram
IX9907: High Voltage, Dimmable LED Driver with PFC Control
• Optimized for phase-cut dimmable, off-line LED applications
• Multiple safety features ensure full system protection
VCC
ZCV
Ringing
Suppress
Blanking
Lighting & Display Products
Reference Voltage
Generator
Features:
• Internal 650V, 2Ω power MOSFET
• Single stage, primary control with PFC and dimming features
• >90% efficiency
• >98% power factor
• Wide operating voltage range
• Digital soft start
• Foldback correction and cycle-by-cycle peak current control
• Output over-current and over-voltage protection
• Over-temperature protection
• Under-voltage lockout
DRAIN
Over-Voltage Protection
Leading
Edge
Blanking
Foldback
Sense Amp
SOURCE
Over-Temp
Sensor
Soft-Start
Control
VR
Shorted Winding Detection
LPF
Leading
Edge
Blanking
Leading
Edge
Blanking
PFC
• Signage, decorative LED lighting
• Flat-panel display RGB backlighting
• DC & AC/DC LED driver applications
GND
Features:
• 8V to 450V input voltage range
• >90% efficiency
• Drives multiple LEDs in series/parallel combinations
• Regulated LED drive current
• Linear or PWM brightness control inputs
• Resistor-programmable oscillator frequency
34
Gate
Control
Control
Logic
Foldback
Correction
CS
MXHV9910: High Voltage, Off-Line LED Driver
VCC Monitor
Over - Under
Voltage Lockout
IX9907, MXHV9910
For data sheets, go to www.ixysic.com/Products/ProdList.htm
IXYS Integrated Circuits − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
Analog
Mux
CPC9909: High Efficiency, High Brightness Off-Line LED Driver
• 8V to 550V input voltage range
• Linear or PWM brightness control inputs
• Drives multiple LEDs in series/parallel
8-Pin SOIC
Features:
• >90% efficiency
• Stable operation at >50% duty cycle
• Regulated LED current
• Resistor-programmable minimum off-time
• Drives external power MOSFET, enabling high LED output current applications
• Buck or boost configuration
IX9908
IX9908: High Voltage, Dimmable LED Driver with PFC Control
• Ideal for quasi-resonant flyback LED bulb designs
• Supports phase-cut dimming and power factor correction
• Multiple safety features ensure full system protection
Features:
T1
DVCC
DOUT
SNUBBER
RZCV1
AC
-
+
COUT
CZCV
CVCC
Aux
CIN
• Single stage, primary control with PFC and dimming features
• >90% efficiency
• >98% power factor
• Wide operating voltage range: up to 600V
• Digital soft start
• Cycle-by-cycle peak current control
Lighting & Display Products
IX9908, CPC9909
RZCV2
VCC
Q1
ZCV HV GD
LEDs
IX9908
RIN1
RIN2
VR
GND CS
CC
RCS
DVR
CVR
For data sheets, go to www.ixysic.com/Products/ProdList.htm
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900
35
TELECOMMUNICATIONS PRODUCTS
• LITELINK™ SILICON DAA PHONE LINE INTERFACE
Telecommunications Products
•
•
•
•
•
Industry’s only single-package silicon Data Access Arrangement (DAA)
Ideal for both voice and data (V.22bis to V.90/V.92) applications in particularly dense circuit environments
Internal optical isolation barrier eliminates high-cost transformer or capacitive isolation circuits
Saves cost through reduced passive component count and smaller printed circuit board space
Available in a thin 32-pin SOIC surface mount package
32-Pin SOIC
Part
Number
Isolation
Voltage
(Vrms)
Power
Supply
(V)
Caller ID
Ringing Detect
CPC5622
3000
CPC5621
CPC5620
3000
3000
3.3 - 5
Continuous
Half-wave & full-wave
3.3 - 5
3.3 - 5
Selectable (CID=0)
Selectable (CID=0)
Full-wave (CID=1)
Half-wave (CID=1)
The 3kVrms internal isolation barrier exceeds all worldwide regulatory requirements. The LITELINK application circuit is capable of surviving 6kV (10μsec x 700μsec)
lightning surge waveforms making it the most robust silicon DAA on the market.
LITELINK offers the lowest operational phone line quiescent current. The device easily interfaces to commonly available standard single-ended or differential voice and
modem codecs on the market. Contact IXYS Integrated Circuits for information on codec reference designs that offer programmable AC termination impedance for global
applications. LITELINK complies with international PSTN agency requirements.
CPC5622
Features:
Applications:
• Voice and data applications
• Modem DAA for speeds up to V.92
• Half-wave or full-wave ringing detection
• Worldwide telephone network compatibility
• Caller-ID reception
• Line side powered from telephone line
• 3.3V to 5V power supply
• Easy interface with modem ICs and
voice codecs
• High power transmit option for
voice applications (>3dBm)
• Small 32-pin SOIC package
• Computer telephony
• VoIP gateways
• PBXs
• Satellite set-top box
• V.92 modems
• Fax machines
• Voice mail systems
• Embedded modems
• Vending machines
• Automated banking
• Remote metering
• Surveillance
• Security systems
Isolation Barrier
Tx+
Tx-
Transmit
Diff.
Amplifier
TIP
Transmit
Isolation
Amplifier
MODE
OH
RX
Gain
Trim
Rx-
Receive
Diff.
Amplifier
RING
Half Wave
Rx+
RING2
Transconductance
Stage
2-4 Wire Hybrid
AC/DC Termination
Hook Switch
Receive
Isolation
Amplifier
RING
RX MUX
&
Ringing Det.
Full Wave
CSNOOP RSNOOP
Snoop
Amplifier
Ringing Detect Outputs
36
TX
Gain
Trim
For data sheets, go to www.ixysic.com/Products/ProdList.htm
IXYS Integrated Circuits − 78 Cherry Hill Drive − Beverly, MA USA 01915 − www.ixysic.com
CSNOOP RSNOOP
• SINGLE-CHANNEL VOICE-BAND CODEC: CPC5750
• μ-law and A-law ITU G.711 companding codec
• Operates on +3.3V power
• Differential analog signal paths
• Programmable transmit and receive gain, +/-12dB in 0.1dB increments
• Transmit path 60Hz rejection filter
• Differential amplifier drives +3.2dBm into 600Ω
• Stable gain over temperature
• PCM and IOM-2 GCI telecommunication interfaces
• Short and long frame syncs supported
• Independent transmit and receive programmable time slots
• Accepts PCLK from 512kHz to 8.192MHz
• SPI serial interface for control in PCM mode
• Programmable power down-mode, IDD = 20μA
• Analog and digital loopback modes for testing
VDD
D3
D2
Features:
D1
D0
CPC5750 Block Diagram
Control
Register
RST
SPI
Interface
SCLK
SDI
SDO
CS
POR
DLB
+
-
AIN-
ADC
FIR
Filter
P-law/A-law
Encoder
VREF
BAND GAP
BUF
PCM/IOM-2
Interface
Logic
0.22PF
VDD
VEE
Telecommunications Products
AIN+
FS
DTX
DRX
PCLK
SFSEL
BUF
MUTE
AOUT+
AOUT-
+
-
Noise
Shaper
DAC
FIR
Filter
m-law/A-law
Decoder
ALB
• CALL PROGRESS TONE DETECTOR: M-980-02
• Detects common call progress tones including busy tone, dial tone, call waiting tones, and others
• Operates on a 2.8V to 5.5V supply
Features:
Applications:
• Receive common call progress tones
• The M-980-02 operates with a single 2.8-5.5 volt supply
• Linear input (detector)
• Inexpensive band detector with wide dynamic range (>38dB)
• Low power consumption
• PBX circuits
• Billing systems
• Test equipment
• Point-of-sale terminals
M-980-02: Call Progress Tone Detector
V
SS
V
REF
VDD
Ref
Gen
Bandpass
Filter
SIGIN
Level
Sense
Digital
Control
Detect
16-Pin SOIC
Part
Number
M-980-02
Function
(315 - 640Hz)
Tone detector
Osc
Package Types
XIN
16-pin SOIC, 8-pin DIP
Clock Gen
XOUT
Enable
8-Pin DIP
For data sheets, go to www.ixysic.com/Products/ProdList.htm
+1 978 524 6700, ¬ +1 978 524 4700 − Customer Service +1 978 524 6768, ¬ +1 978 524 4900
37
• LINE CARD ACCESS SWITCHES (LCAS)
Features:
8
• Monolithic IC reliability
• Impulse noise reduction
• Low, matched on-resistance
• Built-in zero-cross ringing switching
• Small surface mount SOIC packages
• Ultra-low power consumption of
工商网监
湘ICP备2023018690号
