L345

MCC 60 Thyristor Module Preliminary data ITRMS = 2x 100 A = 2x 64 A ITAVM VRRM, DRM = 1600 V VRSM VDSM V 1700 VRRM VDRM V 1600 Type 3 671 542 TO-240 AA 2 1 3 6 7 4 5 MCC 60-16io1 B Symbol ITRMS, IFRMS ITAVM ITSM, IFSM Conditions TVJ = TVJM TC = 85°C; 180° sine TVJ = 45°C; VR = 0 TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine Maximum Ratings 100 64 1150 1230 1000 1070 6610 6350 5000 4810 150 A A A A A A A2 s A2 s As A2 s A/µs 2 Features q q q q q International standard package Direct copper bonded Al2O3-ceramic base plate Planar passivated chips Isolation voltage 3600 V~ Gate-cathode twin pins I2dt TVJ = 45°C VR = 0 TVJ = TVJM VR = 0 Applications q q q DC motor control Softstart AC motor controller Light, heat and temperature control (di/dt)cr TVJ = TVJM repetitive, IT = 150 A f = 50Hz, tP = 200µs VD = 2/3 VDRM IG = 0.45 A non repetitive, IT = ITAVM diG/dt = 0.45 A/µs TVJ = TVJM; VDR = 2/3 VDRM RGK = ¥; method 1 (linear voltage rise) TVJ = TVJM IT = ITAVM tP = tP = 30 µs 300 µs Advantages q q 500 1000 10 5 0.5 10 -40...+140 140 -40...+125 A/µs V/µs W W W V °C °C °C V~ V~ q (dv/dt)cr PGM PGAV VRGM TVJ TVJM Tstg VISOL Md Weight q Space and weight savings Simple mounting with two screws Improved temperature and power cycling Reduced protection circuits Dimensions in mm (1 mm = 0.0394") 50/60 Hz, RMS IISOL £ 1 mA t = 1 min t=1s 3000 3600 Mounting torque (M5) Terminal connection torque (M5) Typical including screws 2.5-4.0/22-35 Nm/lb.in. 2.5-4.0/22-35 Nm/lb.in. 90 g Data according to IEC 60747 and refer to a single thyristor/diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions © 2000 IXYS All rights reserved 1-2 928 MCC 60 Symbol IRRM, IDRM VT, VF VT0 rT VGT IGT VGD IGD IL IH tgd tq QS IRM RthJC RthCH dS dA a Conditions TVJ = TVJM; VR = VRRM; VD = VDRM IT, IF = 200 A; TVJ = 25°C TVJ = 125°C; For power-loss calculations only TVJ = TVJM VD = 6 V; VD = 6 V; TVJ = TVJM; TVJ TVJ TVJ TVJ = = = = 25°C -40°C 25°C -40°C Characteristic Values 20 1.70 0.85 4.8 1.4 1.6 100 200 0.2 10 450 200 2 150 110 12 0.5 0.25 0.1 12.7 9.6 50 mA V V mW V V mA mA V mA mA IGD, TVJ = 125°C 4: PGAV = 0.5 W 5: PGM = 5W 6: PGM = 10 W 102 103 IG 3 1 1 4 2 5 6 VG 10 1: IGT, TVJ = 125°C V 2: IGT, TVJ = 25°C 3: IGT, TVJ = -40°C VD = 2/3 VDRM TVJ = 25°C; tP = 10 µs, VD = 6 V IG = 0.45 A; diG/dt = 0.45 A/µs TVJ = 25°C; VD = 6 V; RGK = ¥ TVJ = 25°C; VD = ½ VDRM IG = 0.45 A; diG/dt = 0.45 A/µs TVJ = TVJM; IT = 120 A, tP = 200 µs; -di/dt = 10 A/µstyp. VR = 100 V; dv/dt = 20 V/µs; VD = 2/3 VDRM TVJ = TVJM; IT, IF = 50 A, -di/dt = 0.64 A/µs per thyristor/diode; DC current per module per thyristor/diode; DC current Creepage distance on surface Strike distance through air Maximum allowable acceleration mA µs µs µC A K/W K/W K/W mm mm m/s2 tgd 0.1 100 101 mA 104 Fig. 1 Gate trigger characteristics 1000 TVJ = 25°C µs typ. 100 Limit typ. 10 Optional accessories for module-type MCC 60 version 1 B Keyed gate/cathode twin plugs with wire length = 350 mm, gate = yellow, cathode = red Type ZY 200L (L = Left for pin pair 4/5) UL 758, style 1385, Type ZY 200R (R = right for pin pair 6/7) CSA class 5851, guide 460-1-1 1 10 mA IG 100 1000 Fig. 2 Gate trigger delay time © 2000 IXYS All rights reserved 2-2