LDA201

LDA201 Dual Optocouplers, Unidirectional Input Single-Transistor Output INTEGRATED CIRCUITS DIVISION Parameter Breakdown Voltage - BVCEO Current Transfer Ratio - CTR (Typ) Saturation Voltage - VCE(sat) Input Control Current - IF Rating 30 300 0.5 1 Units VP % V mA Description LDA201 is a dual optocoupler with unidirectional inputs and single-transistor outputs. Current transfer ratios range from 33% to 1000% with a typical value of 300%. Features Approvals • • • • • • • UL Recognized Component: File E76270 • CSA Certified Component: Certificate 1175739 • EN/IEC 60950-1 Certified Component: TUV Certificate B 13 12 82667 003 100mA Continuous Load Rating 3750Vrms Input/Output Isolation Unidirectional Input Small 8-Pin Package Flammability Rating UL 94 V-0 DIP Versions - Machine Insertable, Wave Solderable Ordering Information Applications • • • • • • Telecom Switching Tip/Ring Circuits Modem Switching (Laptop, Notebook, Pocket Size) Loop Detect Ringing Detect Current Sensing Part Number LDA201 LDA201S LDA201STR Description 8-Pin DIP (50/tube) 8-Pin Surface Mount (50/tube) 8-Pin Surface Mount (1000/Reel) Pin Configuration 1 8 2 7 3 6 4 5 A K DS-LDA201-R06 www.ixysic.com C C K A E E 1 INTEGRATED CIRCUITS DIVISION LDA201 Absolute Maximum Ratings @ 25ºC Parameter Breakdown Voltage Reverse Input Voltage Input Control Current Peak (10ms) Power Dissipation Input 1 Phototransistor 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Derate linearly 1.33mW / ºC 2 Derate linearly 2mW / ºC Ratings 30 5 100 1 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Units VP V mA A 150 150 3750 -40 to +85 -40 to +125 Typical values are characteristic of the device at +25°C, and are the result of engineering evaluations. They are provided for information purposes only, and are not part of the manufacturing testing requirements. mW mW Vrms ºC ºC Electrical Characteristics @ 25ºC Parameter Output Characteristics Phototransistor Breakdown Voltage Phototransistor Dark Current Saturation Voltage Current Transfer Ratio Output Capacitance Input Characteristics Input Control Current Input Voltage Drop Reverse Input Current Common Characteristics Capacitance, Input to Output Conditions Symbol Min Typ Max Units IC = 10A VCEO = 5V, IF = 0mA IC = 2mA, IF = 1mA IF = 1mA, VCE = 0.5V 25V, f =1MHz BVCEO ICEO VCE(sat) CTR COUT 30 33 - 85 10 0.3 300 6 500 0.5 1000 - V nA V % pF IC = 0.33mA, VCE = 0.5V IF = 5mA VR = 5V IF VF IR 0.9 - 1.2 - 1 1.4 10 mA V A - CIO - 3 - pF Switching Characteristics @ 25ºC Characteristic Turn-On Time Turn-Off Time Symbol ton toff Test Condition Typ 7 20 VCC=5V, IF=2mA, RL=1K Units s Switching Time Test Circuit VCC Pulse Width=5ms Duty Cycle=1% IF IF RL VCE VCE 90% 10% t on 2 www.ixysic.com t off R06 INTEGRATED CIRCUITS DIVISION LDA201 PERFORMANCE DATA* LED Voltage vs. Current (Linear) 30 20 10 0 1 1.2 1.3 1.4 1.5 LED Forward Voltage (V) Typical CTR vs. LED Forward Current (VCE=5V) 600 -40ºC 25ºC 55ºC 85ºC 500 400 1.0 1.6 300 200 1.1 1.2 1.3 1.4 1.5 LED Forward Voltage (V) 100 80 IF=20mA 60 IF=10mA 40 IF=5mA 20 60 0.14 0.12 0.10 2 3 4 Collector Voltage (V) 0 20 40 60 Temperature (ºC) 80 100 5 IF=20mA IF=15mA 60 IF=10mA 40 IF=5mA IF=2mA IF=1mA 0 -40 6 -20 0 20 40 60 80 Temperature (ºC) 100 120 Collector Leakage Current vs. Temperature 500 96 95 94 93 92 91 90 89 400 VCE=10V VCE=5V VCE=3V 300 200 100 88 87 -20 0 20 40 60 Temperature (ºC) 14 80 100 -40 -20 20 40 60 Temperature (ºC) 100 0 -40 -20 0 20 40 60 Temperature (ºC) 80 100 10 IF=1mA 10 8 IF=2mA 6 4 IF=5mA 2 0 100 80 Turn-Off Time vs. Load Resistance (VCC=5V) Turn-On Time vs. Load Resistance (VCC=5V) 12 Turn-On Time (Ps) 0 Turn-Off Time (ms) 0.08 -40 1 -20 80 Blocking Voltage vs. Temperature Blocking Voltage (VP) 0.16 IF=5mA IF=2mA IF=1mA 20 IF=2mA IF=1mA 0 Saturation Voltage vs. Temperature (IF=2mA, IC=1mA) 0.18 1.1 100 Leakage Current (nA) 20 30 40 50 LED Forward Current (mA) 1.2 ICE Current vs. Temperature (VCE=5V) IF=50mA 0 10 1.3 Typical Collector Current vs. Collector Voltage 100 0 1.4 1.0 -40 1.6 IF=50mA IF=20mA IF=10mA 1.5 ICE Current (mA) 1.1 Collector Current (mA) 700 Current Transfer Ratio (%) 10 0.1 1.0 Saturation Voltage (V) 1.6 LED Forward Voltage (V) LED Forward Current (mA) LED Forward Current (mA) 40 0.20 LED Forward Voltage vs. Temperature LED Voltage vs. Current (Log) 100 50 IF=2mA IF=5mA IF=1mA 8 6 4 2 0 1k 10k 100k Load Resistance (:) 1M 0 100 200 300 400 Load Resistance (k:) 500 600 *Unless otherwise noted, data presented in these graphs is typical of device operation at 25ºC. For guaranteed parameters not indicated in the written specifications, please contact our application department. R06 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION LDA201 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classifies its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) classification as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Classification LDA201 / LDA201S MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Soldering Profile Provided in the table below is the Classification Temperature (TC) of this product and the maximum dwell time the body temperature of this device may be (TC - 5)ºC or greater. The classification temperature sets the Maximum Body Temperature allowed for this device during lead-free reflow processes. For through-hole devices, and any other processes, the guidelines of J-STD-020 must be observed. Device Classification Temperature (Tc) Dwell Time (tp) Max Reflow Cycles LDA201 / LDA201S 250ºC 30 seconds 3 Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. Board washing to reduce or remove flux residue following the solder reflow process is acceptable provided proper precautions are taken to prevent damage to the device. These precautions include, but are not limited to: using a low pressure wash and providing a follow up bake cycle sufficient to remove any moisture trapped within the device due to the washing process. Due to the variability of the wash parameters used to clean the board, determination of the bake temperature and duration necessary to remove the moisture trapped within the package is the responsibility of the user (assembler). Cleaning or drying methods that employ ultrasonic energy may damage the device and should not be used. Additionally, the device must not be exposed to flux or solvents that are Chlorine- or Fluorine-based. 4 www.ixysic.com R06 INTEGRATED CIRCUITS DIVISION LDA201 Mechanical Dimensions LDA201 2.540 ± 0.127 (0.100 ± 0.005) 9.652 ± 0.381 (0.380 ± 0.015) 8-0.800 DIA. (8-0.031 DIA.) 2.540 ± 0.127 (0.100 ± 0.005) 9.144 ± 0.508 (0.360 ± 0.020) 6.350 ± 0.127 (0.250 ± 0.005) Pin 1 PCB Hole Pattern 7.620 ± 0.254 (0.300 ± 0.010) 0.457 ± 0.076 (0.018 ± 0.003) 3.302 ± 0.051 (0.130 ± 0.002) 7.620 ± 0.127 (0.300 ± 0.005) 7.239 TYP. (0.285) 4.064 TYP (0.160) 0.254 ± 0.0127 (0.010 ± 0.0005) 7.620 ± 0.127 (0.300 ± 0.005) Dimensions mm (inches) 0.813 ± 0.102 (0.032 ± 0.004) LDA201S 9.652 ± 0.381 (0.380 ± 0.015) 2.540 ± 0.127 (0.100 ± 0.005) 6.350 ± 0.127 (0.250 ± 0.005) Pin 1 0.635 ± 0.127 (0.025 ± 0.005) 3.302 ± 0.051 (0.130 ± 0.002) 9.525 ± 0.254 (0.375 ± 0.010) 0.457 ± 0.076 (0.018 ± 0.003) PCB Land Pattern 2.54 (0.10) 8.90 (0.3503) 1.65 (0.0649) 7.620 ± 0.254 (0.300 ± 0.010) 0.254 ± 0.0127 (0.010 ± 0.0005) 0.65 (0.0255) 4.445 ± 0.127 (0.175 ± 0.005) Dimensions mm (inches) 0.813 ± 0.102 (0.032 ± 0.004) R06 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION LDA201 LDA201STR Tape & Reel 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) K0 =4.90 (0.193) K1 =4.20 (0.165) Embossed Carrier Embossment W=16.00 (0.63) Bo=10.30 (0.406) Ao=10.30 (0.406) P=12.00 (0.472) User Direction of Feed Dimensions mm (inches) NOTES: 1. Dimensions carry tolerances of EIA Standard 481-2 2. Tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 6 Specification: DS-LDA201-R06 ©Copyright 2017, IXYS Integrated Circuits Division All rights reserved. Printed in USA. 2/10/2017