MCC44

MCC44 MCD44 Thyristor Modules Thyristor/Diode Modules ITRMS = 2x80 A ITAVM = 2x51 A VRRM = 800-1800 V TO-240 AA 2 1 3 6 7 VRSM VDSM V 900 1300 1500 1700 1900 Symbol ITRMS, IFRMS ITAVM, IFAVM ITSM, IFSM VRRM VDRM V 800 1200 1400 1600 1800 Type Version MCC MCC MCC MCC MCC 44-08 44-12 44-14 44-16 44-18 1B io1 B / io1 B / io1 B / io1 B / io1 B / 8B io8 B io8 B io8 B io8 B io8 B Version MCD MCD MCD MCD MCD 44-08 44-12 44-14 44-16 44-18 1B 8B 4 5 io1 B / io8 B io1 B / io8 B io1 B / io8 B io1 B / io8 B io1 B / io8 B 3 671 542 Conditions TVJ = TVJM TC = 83°C; 180° sine TC = 85°C; 180° sine TVJ = 45°C; VR = 0; TVJ = TVJM; t = 10 ms; VR = 0; t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine Maximum Ratings 80 51 49 1150 1230 1000 1070 6600 6280 5000 4750 150 A A A A A A A A2s A2s As A2s A/µs 2 MCC Version 1 B 3 1 5 42 MCD Version 1 B I2dt TVJ = 45°C; VR = 0, TVJ = TVJM; VR = 0; 3 6 1 52 MCC Version 8 B 3 1 52 (di/dt)cr TVJ = TVJM; repetitive, IT = 150 A f = 50Hz; tP = 200µs; VD = 2/3 VDRM; IG = 0.45 A; non repetitive, IT = ITAVM diG/dt = 0.45 A/µs TVJ = TVJM; VDR = /3 VDRM RGK = ∞; method 1 (linear voltage rise) TVJ = TVJM; IT = ITAVM; tP = 30 µs tP = 300 µs 2 MCD Version 8 B Features 500 1000 10 5 0.5 10 -40...+125 125 -40...+125 A/µs V/µs W W W V °C °C °C V~ V~ • International standard package, JEDEC TO-240 AA • Direct copper bonded Al2O3-ceramic base plate • Planar passivated chips • Isolation voltage 3600 V~ • UL registered, E 72873 • Gate-cathode twin pins for version 1B Applications • DC motor control • Softstart AC motor controller • Light, heat and temperature control Advantages • Space and weight savings • Simple mounting with two screws • Improved temperature and power cycling • Reduced protection circuits 419 (dv/dt)cr PGM PGAV VRGM TVJ TVJM Tstg VISOL Md Weight 50/60 Hz, RMS; IISOL ≤ 1 mA; t = 1 min t=1s 3000 3600 Mounting torque (M5) Terminal connection torque (M5) typical including screws 2.5-4.0/22-35 Nm/lb.in. 2.5-4.0/22-35 Nm/lb.in. 90 g IXYS reserves the right to change limits, test conditions and dimensions © 2004 IXYS All rights reserved 1-4 MCC44 MCD44 Symbol IRRM, IDRM VT, VF VT0 rT VGT IGT VGD IGD IL IH tgd tq QS IRM RthJC RthJK dS dA a Conditions TVJ = TVJM; VR = VRRM; VD = VDRM IT, IF = 200 A; TVJ = 25°C For power-loss calculations only (TVJ = 125°C) VD = 6 V; VD = 6 V; TVJ = TVJM; TVJ TVJ TVJ TVJ = = = = 25°C -40°C 25°C -40°C Characteristic Values 5 1.75 0.85 5.3 1.5 1.6 100 200 0.2 10 450 200 2 typ. 150 90 11 0.53 0.265 0.73 0.365 12.7 9.6 50 mA V V mΩ V V mA mA V mA mA mA µs µs µC A K/W K/W K/W K/W mm mm m/s2 10 0.1 100 IGD, TVJ = 125°C 101 102 4: PGAV = 0.5 W 5: PGM = 5W 6: PGM = 10 W 103 IG 3 1 1 4 2 5 6 VG 10 1: IGT, TVJ = 125°C V 2: IGT, TVJ = 25°C 3: IGT, TVJ = -40°C VD = 2/3 VDRM TVJ = 25°C; tP = 10 µs, VD = 6 V IG = 0.45 A; diG/dt = 0.45 A/µs TVJ = 25°C; VD = 6 V; RGK = ∞ TVJ = 25°C; VD = 1/2 VDRM IG = 0.45 A; diG/dt = 0.45 A/µs TVJ = TVJM; IT = 120 A, tP = 200 µs; -di/dt = 10 A/µs VR = 100 V; dv/dt = 20 V/µs; VD = 2/3 VDRM TVJ = TVJM; IT /IF = 50 A, -di/dt = 0.64 A/µs per per per per thyristor/diode; DC current module thyristor/diode; DC current module mA 104 Fig. 1 Gate trigger characteristics 1000 TVJ = 25°C µs tgd typ. 100 Limit other values see Fig. 8/9 Creepage distance on surface Strike distance through air Maximum allowable acceleration Optional accessories for module-type MCC 44 version 1 B Keyed gate/cathode twin plugs with wire length = 350 mm, gate = yellow, cathode = red Type ZY 200L (L = Left for pin pair 4/5) UL 758, style 1385, Type ZY 200R (R = right for pin pair 6/7) CSA class 5851, guide 460-1-1 1 10 100 IG mA 1000 Fig. 2 Gate trigger delay time Dimensions in mm (1 mm = 0.0394") MCC/MCD Version 1 B MCC Version 8 B MCD Version 8 B IXYS reserves the right to change limits, test conditions and dimensions 2-4 © 2004 IXYS All rights reserved 333 419 MCC44 MCD44 Fig. 3 Surge overload current ITSM, IFSM: Crest value, t: duration Fig. 4 ∫i2dt versus time (1-10 ms) Fig. 4a Maximum forward current at case temperature Fig. 5 Power dissipation versus onstate current and ambient temperature (per thyristor or diode) Fig. 6 Three phase rectifier bridge: Power dissipation versus direct output current and ambient temperature IXYS reserves the right to change limits, test conditions and dimensions © 2004 IXYS All rights reserved 3-4 419 MCC44 MCD44 Fig. 7 Three phase AC-controller: Power dissipation versus RMS output current and ambient temperature Fig. 8 Transient thermal impedance junction to case (per thyristor or diode) RthJC for various conduction angles d: d DC 180° 120° 60° 30° RthJC (K/W) 0.53 0.55 0.58 0.6 0.62 Constants for ZthJC calculation: i 1 2 3 Rthi (K/W) 0.015 0.026 0.489 ti (s) 0.0035 0.02 0.195 Fig. 9 Transient thermal impedance junction to heatsink (per thyristor or diode) RthJK for various conduction angles d: d DC 180° 120° 60° 30° RthJK (K/W) 0.73 0.75 0.78 0.8 0.82 Constants for ZthJK calculation: i 1 2 3 4 IXYS reserves the right to change limits, test conditions and dimensions Rthi (K/W) 0.015 0.026 0.489 0.2 ti (s) 0.0035 0.02 0.195 0.68 419 4-4 © 2004 IXYS All rights reserved