MCC94

MCC 94 MCD 94 High Voltage Thyristor Module High Voltage Thyristor/Diode Modules ITRMS = 2x 180 A ITAVM = 2x 104 A VRRM = 2000-2200 V VRSM VDSM V 2100 2300 VRRM VDRM V 2000 2200 Type TO-240 AA 2 1 3 6 7 4 5 MCC 94-20io1 B MCC 94-22io1 B MCD 94-20io1 B MCD 94-22io1 B 3 671 542 Symbol ITRMS ITAVM ITSM Test Conditions TVJ = TVJM TC = 85°C; 180° sine TVJ = 45°C; VR = 0 TVJ = TVJM VR = 0 t = 10 ms (50 Hz) t = 8.3 ms (60 Hz) t = 10 ms (50 Hz) t = 8.3 ms (60 Hz) t = 10 ms (50 Hz) t = 8.3 ms (60 Hz) t = 10 ms (50 Hz) t = 8.3 ms (60 Hz) Maximum Ratings 180 104 1700 1800 1540 1640 14450 13500 11850 11300 150 A A A A A A A2s A2s A2s A2s A/ms A/ms V/ms W W W V °C °C °C V~ V~ Nm/lb.in. Nm/lb.in. g MCC 3 1 5 42 MCD òi2dt TVJ = 45°C VR = 0 TVJ = TVJM VR = 0 Features q (di/dt)cr TVJ = TVJM repetitive, IT = 250 A f = 50 Hz, tP = 200 ms VD = 2/3 VDRM IG = 0.45 A, non repetitive, IT = ITAVM diG/dt = 0.45 A/ms TVJ = TVJM; VDR = 2/3 VDRM RGK = ¥; method 1 (linear voltage rise) TVJ = TVJM IT = ITAVM tP = 30 ms tP = 300 ms q 500 1000 10 5 0.5 10 -40 ...125 125 -40 ...125 q q q q (dv/dt)cr PGM PGAV VRGM TVJ TVJM Tstg VISOL Md Weight International standard package, JEDEC TO-240 AA Direct Copper Bonded Al2O3 -ceramic base plate Planar passivated chips Isolation voltage 3600 V~ UL registered, E 72873 Gate-cathode twin pins for version 1B Applications q q q DC motor control Softstart AC motor controller Light, heat and temperature control 50/60 Hz, RMS IISOL £ 1 mA t = 1 min t=1s 3000 3600 2.5-4.0/22-35 2.5-4.0/22-35 90 Advantages q q q Mounting torque (M5) Terminal connection torque (M5) Typical including screws q Space and weight savings Simple mounting with two screws Improved temperature and power cycling Reduced protection circuits Data according to IEC 60747 and refer to a single thyristor/diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions 839 © 2000 IXYS All rights reserved 1-2 MCC 94 MCD 94 Symbol IRRM, IDRM VT VT0 rT VGT IGT VGD IGD IL IH tgd tq QS IRM RthJC RthJK dS dA a Test Conditions TVJ = TVJM; VR = VRRM IT = 300 A; TVJ = 25°C Characteristic Values 15 1.74 0.85 3.2 1.5 1.6 100 200 0.25 10 200 150 2 typ. 185 170 45 0.22 0.11 0.42 0.21 12.7 9.6 50 mA V V mW V V mA mA V mA mA IGD, TVJ = 125°C 4: PGAV = 0.5 W 5: PGM = 5W 6: PGM = 10 W 102 103 IG 3 1 1 4 2 5 6 VG 10 1: IGT, TVJ = 125°C V 2: IGT, TVJ = 25°C 3: IGT, TVJ = -40°C For power-loss calculations only (TVJ = TVJM) VD = 6 V; VD = 6 V; TVJ TVJ TVJ TVJ = 25°C = -40°C = 25°C = -40°C TVJ = TVJM; VD = 2/3 VDRM TVJ = TVJM; VD = 2/3 VDRM TVJ = 25°C; VD = 6 V; tP = 30 ms diG/dt = 0.45 A/ms; IG = 0.45 A TVJ = 25°C; VD = 6 V; RGK = ¥ TVJ = 25°C; VD = 1/2 VDRM diG/dt = 0.45 A/ms; IG = 0.45 A TVJ = TVJM; VR = 100 V; VD = 2/3 VDRM; tP = 200 ms dv/dt = 20 V/ms; IT = 150 A; -di/dt = 10 A/ms TVJ = TVJM -di/dt = 6 A/ms; IT = 50 A per thyristor; DC current per module per thyristor; DC current per module Creeping distance on surface Creepage distance in air Maximum allowable acceleration mA ms ms 0.1 100 101 mA 104 Fig. 1 Gate trigger characteristics 1000 mC A K/W K/W K/W K/W mm mm m/s2 tgd TVJ = 25°C µs typ. 100 Limit 10 Optional accessories for module-type MCC 94 version 1 B Keyed gate/cathode twin plugs with wire length = 350 mm, gate = yellow, cathode = red Type ZY 200L (L = Left for pin pair 4/5) UL 758, style 1385, Type ZY 200R (R = right for pin pair 6/7) CSA class 5851, guide 460-1-1 1 10 mA IG 100 1000 Fig. 2 Gate trigger delay time Dimensions in mm (1 mm = 0.0394") RthJC for various conduction angles d: d DC 180° 120° 60° 30° RthJC (K/W) 0.22 0.23 0.25 0.27 0.28 RthJK for various conduction angles d: d DC 180° 120° 60° 30° RthJK (K/W) 0.42 0.43 0.45 0.47 0.48 Constants for ZthJC calculation: i 1 2 3 Rthi (K/W) 0.0066 0.0678 0.1456 ti (s) 0.0019 0.0477 0.344 Constants for ZthJK calculation: i 1 2 3 4 Rthi (K/W) 0.0066 0.0678 0.1456 0.2 ti (s) 0.0019 0.0477 0.344 1.32 © 2000 IXYS All rights reserved 2-2