MCC95-08IO1B

MCC 95 MCD 95 Thyristor Modules Thyristor/Diode Modules ITRMS = 2x 180 A ITAVM = 2x 116 A VRRM = 800-1800 V TO-240 AA 2 VRSM VRRM VDSM VDRM V 900 1300 1500 1700 1900 Type Version 1 MCC MCC MCC MCC MCC 95-08io1 95-12io1 95-14io1 95-16io1 95-18io1 B -B MCD 95-12io1 B B -B MCD 95-16io1 B B -- 3 6 7 4 V 800 1200 1400 1600 1800 Version 8 MCC MCC MCC MCC MCC 95-08io8 95-12io8 95-14io8 95-16io8 95-18io8 B B B B B MCD MCD MCD MCD MCD 95-08io8 95-12io8 95-14io8 95-16io8 95-18io8 B B B B B 1 5 1500 1400 1700 1600 MCC 95-16io1 MCC 95-18io1 3 671 542 Symbol ITRMS, IFRMS ITAVM, IFAVM ITSM, IFSM Test Conditions TVJ = TVJM TC = 85°C; 180° sine TVJ = 45°C; VR = 0 TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine Maximum Ratings 180 116 2250 2400 2000 2150 25 300 23 900 20 000 19 100 150 A A A A A A A2s A2s A2s A2s A/ms A/ms V/ms W W W V °C °C °C V~ V~ MCC Version 1 3 1 5 42 MCD Version 1 3 6 1 52 òi2dt TVJ = 45°C VR = 0 TVJ = TVJM VR = 0 MCC Version 8 3 1 52 (di/dt)cr TVJ = TVJM repetitive, IT = 250 A f =50 Hz, tP =200 ms VD = 2/3 VDRM IG = 0.45 A non repetitive, IT = ITAVM diG/dt = 0.45 A/ms TVJ = TVJM; VDR = 2/3 VDRM RGK = ¥; method 1 (linear voltage rise) TVJ = TVJM IT = ITAVM tP = 30 ms tP = 300 ms MCD Version 8 Features q 500 1000 10 5 0.5 10 -40...+125 125 -40...+125 (dv/dt)cr PGM PGAV VRGM TVJ TVJM Tstg VISOL Md Weight q q q q q International standard package, JEDEC TO-240 AA Direct copper bonded Al2O3 -ceramic base plate Planar passivated chips Isolation voltage 3600 V~ UL registered, E 72873 Gate-cathode twin pins for version 1 Applications q q q 50/60 Hz, RMS IISOL £ 1 mA t = 1 min t=1s 3000 3600 DC motor control Softstart AC motor controller Light, heat and temperature control Mounting torque (M5) Terminal connection torque (M5) Typical including screws 2.5-4.0/22-35 Nm/lb.in. 2.5-4.0/22-35 Nm/lb.in. 90 g Advantages q q q Data according to IEC 60747 and refer to a single thyristor/diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions q Space and weight savings Simple mounting with two screws Improved temperature and power cycling Reduced protection circuits 032 © 2000 IXYS All rights reserved 1-4 MCC 95 MCD 95 Symbol IRRM, IDRM VT, VF VT0 rT VGT IGT VGD IGD IL IH tgd tq QS IRM RthJC RthJK dS dA a Test Conditions TVJ = TVJM; VR = VRRM; VD = VDRM IT, IF = 300 A; TVJ = 25°C For power-loss calculations only (TVJ = 125°C) VD = 6 V; VD = 6 V; TVJ = TVJM; TVJ = 25°C TVJ = -40°C TVJ = 25°C TVJ = -40°C VD = 2/3 VDRM Characteristic Values 5 1.5 0.8 2.4 2.5 2.6 150 200 0.2 10 450 200 2 185 170 45 0.22 0.11 0.42 0.21 12.7 9.6 50 mA V V mW V V mA mA V mA mA mA ms ms mC A K/W K/W K/W K/W mm mm m/s2 Fig. 1 Gate trigger characteristics TVJ = 25°C; tP = 10 ms; VD = 6 V IG = 0.45 A; diG/dt = 0.45 A/ms TVJ = 25°C; VD = 6 V; RGK = ¥ TVJ = 25°C; VD = 1/2 VDRM IG = 0.45 A; diG/dt = 0.45 A/ms TVJ = TVJM; IT = 150 A, tP = 200 ms; -di/dt = 10 A/ms typ. VR = 100 V; dv/dt = 20 V/ms; VD = 2/3 VDRM TVJ = TVJM; IT, IF = 50 A, -di/dt = 6 A/ms per per per per thyristor/diode; DC current module thyristor/diode; DC current module other values see Fig. 8/9 Creepage distance on surface Strike distance through air Maximum allowable acceleration Optional accessories for module-type MCC 95 version 1 B Keyed gate/cathode twin plugs with wire length = 350 mm, gate = yellow, cathode = red Type ZY 200L (L = Left for pin pair 4/5) UL 758, style 1385, Type ZY 200R (R = right for pin pair 6/7) CSA class 5851, guide 460-1-1 Fig. 2 Gate trigger delay time Dimensions in mm (1 mm = 0.0394") MCC / MCD Version 1 B MCC Version 8 B MCD Version 8 B Version 1 or 8 without B in typ designation = without insert in mountig holes © 2000 IXYS All rights reserved 2-4 MCC 95 MCD 95 Fig. 3 Surge overload current ITSM, IFSM: Crest value, t: duration Fig. 4 òi2dt versus time (1-10 ms) Fig. 4a Maximum forward current at case temperature Fig. 5 Power dissipation versus onstate current and ambient temperature (per thyristor or diode) Fig. 6 Three phase rectifier bridge: Power dissipation versus direct output current and ambient temperature © 2000 IXYS All rights reserved 3-4 MCC 95 MCD 95 Fig. 7 Three phase AC-controller: Power dissipation versus RMS output current and ambient temperature Fig. 8 Transient thermal impedance junction to case (per thyristor or diode) RthJC for various conduction angles d: d DC 180° 120° 60° 30° RthJC (K/W) 0.22 0.23 0.25 0.27 0.28 Constants for ZthJC calculation: i 1 2 3 Rthi (K/W) 0.0066 0.0678 0.1456 ti (s) 0.0019 0.0477 0.344 Fig. 9 Transient thermal impedance junction to heatsink (per thyristor or diode) RthJK for various conduction angles d: d DC 180° 120° 60° 30° RthJK (K/W) 0.42 0.43 0.45 0.47 0.48 Constants for ZthJK calculation: i 1 2 3 4 Rthi (K/W) 0.0066 0.0678 0.1456 0.2 ti (s) 0.0019 0.0477 0.344 1.32 © 2000 IXYS All rights reserved 4-4