MUBW25-12T7

MUBW 25-12 T7 Converter - Brake - Inverter Module (CBI2) with Trench IGBT technology Preliminary data 21 D11 D13 22 D15 D7 D1 T1 16 7 1 D12 2 D14 D16 14 T7 11 D3 T3 17 D2 T2 D5 20 T5 8 5 12 NTC 19 6 15 3 18 D4 T4 4 D6 13 T6 9 10 23 Three Phase Rectifier 24 Brake Chopper Three Phase Inverter VRRM = 1600 V VCES = 1200 V VCES = 1200 V IFAVM = 38 A IC25 = 30 A IC25 = 45 A IFSM = 300 A VCE(sat) = 1.7 V VCE(sat) = 1.7 V Application: AC motor drives with Input Rectifier Bridge D11 - D16 Conditions Maximum Ratings VRRM 1600 V IFAV IDAVM IFSM TC = 80°C; sine 180° TC = 80°C; rectangular; d = 1/3; bridge TVJ = 25°C; t = 10 ms; sine 50 Hz 25 72 300 A A A Ptot TC = 25°C 100 W Symbol Conditions VF IF = 25 A; TVJ = 25°C TVJ = 125°C 1.1 1.1 IR VR = VRRM; TVJ = 25°C TVJ = 125°C 0.4 RthJC Characteristic Values (TVJ = 25°C, unless otherwise specified) min. typ. max. (per diode) IXYS reserves the right to change limits, test conditions and dimensions. © 2006 IXYS All rights reserved 1.3 V V 0.02 mA mA • Input from single or three phase grid • Three phase synchronous or asynchronous motor • electric braking operation Features • High level of integration - only one power semiconductor module required for the whole drive • Inverter with Trench IGBTs - low saturation voltage - positive temperature coefficient - fast switching - short tail current • Epitaxial free wheeling diodes with Hiperfast and soft reverse recovery • Industry standard package with insulated copper base plate and soldering pins for PCB mounting • Temperature sense included 1.3 K/W 0619 Symbol 1-4 MUBW 25-12 T7 Output Inverter T1 - T6 Equivalent Circuits for Simulation Symbol Conditions VCES TVJ = 25°C to 150°C VGES Continuous IC25 IC80 ICM TC = 25°C TC = 80°C TC = 80°C; tp = 1 ms Ptot TC = 25°C Symbol Conditions VCE(sat) IC = 25 A; VGE = 15 V; TVJ = 25°C TVJ = 125°C VGE(th) IC = 1 mA; VGE = VCE ICES Maximum Ratings 1200 V ± 20 V 45 25 50 A A A 170 W Characteristic Values (TVJ = 25°C, unless otherwise specified) min. typ. max. VCE = VCES; VGE = 0 V; TVJ = 25°C TVJ = 125°C 5 1.7 2.0 2.15 V V 5.8 6.5 V 2.7 0.7 mA mA IGES VCE = 0 V; VGE = ± 20 V Cies VCE = 25 V; VGE = 0 V; f = 1 MHz 1.8 nF QGon VCE= 600 V; VGE = 15 V; IC = 25 A 240 nC Inductive load, TVJ = 125°C VCE = 600 V; IC = 25 A VGE = ±15 V; RG = 36 Ω 90 50 520 90 2.5 3.4 ns ns ns ns mJ mJ td(on) tr td(off) tf Eon Eoff RBSOA IC = ICM; VGE = ±15 V RG = 36 Ω; TVJ = 125°C ISC (SCSOA) VCE = 720 V; VGE = ±15 V; RG = 36 Ω; tp < 10 μs; non-repetitive; TVJ = 125°C RthJC (per IGBT) 400 nA Conditions IF25 IF80 TC = 25°C TC = 80°C Symbol Conditions VF IGBT (typ. at VGE = 15 V; TJ = 125°C) T1-T6 V0 = 0.92 V; R0 = 42.8 mΩ T7 V0 = 0.92 V; R0 = 72 mΩ Diode (typ. at TJ = 125°C) D1-D6 V0 = tbd V; R0 = tbd mΩ D7 V0 = tbd V; R0 = tbd mΩ D11-D16 V0 = tbd V; R0 = tbd mΩ Thermal Response IGBT (typ.) VCEK < VCES - LS di/dt 100 V T1-T6 Cth1 = tbd J/K; Rth1 = tbd K/W Cth2 = tbd J/K; Rth2 = tbd K/W A 0.73 K/W Output Inverter D1 - D6 Symbol Conduction T7 Cth1 = tbd J/K; Rth1 = tbd K/W Cth2 = tbd J/K; Rth2 = tbd K/W Diode (typ.) Maximum Ratings 25 17 A A Characteristic Values min. typ. max. 2.1 1.6 IRM Qrr t rr Erec IF = tbd A; diF/dt = -tbd A/μs; TVJ = 125°C VR = 600 V; VGE = 0 V tbd tbd tbd tbd RthJC (per diode) 2.6 V V Cth1 = tbd J/K; Rth1 = tbd K/W Cth2 = tbd J/K; Rth2 = tbd K/W D7 Cth1 = tbd J/K; Rth1 = tbd K/W Cth2 = tbd J/K; Rth2 = tbd K/W D11-D16 Cth1 = tbd J/K; Rth1 = tbd K/W Cth2 = tbd J/K; Rth2 = tbd K/W A μC ns mJ 2.1 K/W 0619 IF = 25 A; VGE = 0 V; TVJ = 25°C TVJ = 125°C D1-D6 © 2006 IXYS All rights reserved 2-4 MUBW 25-12 T7 Brake Chopper T7 Symbol Conditions Maximum Ratings VCES TVJ = 25°C to 150°C VGES Continuous IC25 IC80 ICM TC = 25°C TC = 80°C TC = 80°C; tp = 1 ms Ptot TC = 25°C Symbol Conditions VCE(sat) IC = 15 A; VGE = 15 V; TVJ = 25°C TVJ = 125°C VGE(th) IC = 0.5 mA; VGE = VCE ICES VCE = VCES; VGE = 0 V; TVJ = 25°C TVJ = 125°C 1200 V ± 20 V 30 15 30 A A A 120 W Characteristic Values (TVJ = 25°C, unless otherwise specified) min. typ. max. 5 1.7 2.0 2.1 V V 5.8 6.5 V 0.1 mA mA 400 nA 0.25 IGES VCE = 0 V; VGE = ± 20 V Cies VCE = 25 V; VGE = 0 V; f = 1 MH z 1.1 nF QGon VCE= 600 V; VGE = 15 V; IC = 15 A 150 nC td(on) tr td(off) tf Eoff Inductive load, TVJ = 125°C VCE = 600 V; IC = 15 A VGE = ±15 V; RG = 75 Ω 90 50 520 90 1.5 ns ns ns ns mJ RBSOA ISC (SCSOA) IC = ICM; VGE = ±15 V RG = 75 Ω; TVJ = 125°C VCE = 720 V; VGE = ±15 V; RG = 75 Ω tp < 10 μs; non-repetitive; TVJ = 125°C VCEK < VCES - LS di/dt 60 RthJC V A 1.05 K/W Brake Chopper D7 Symbol Conditions VRRM TVJ = 25°C to 150°C IF25 IF80 TC = 25°C TC = 80°C Symbol Conditions VF IF = 65 A; TVJ = 25°C TVJ = 125°C 3.0 2.6 IR VR = VRRM; TVJ = 25°C TVJ = 125°C 0.07 1200 V 16 11 A A Characteristic Values min. typ. max. 3.3 V V 0.06 mA mA 3.2 K/W 0619 RthJC Maximum Ratings © 2006 IXYS All rights reserved 3-4 MUBW 25-12 T7 Temperature Sensor NTC Symbol Conditions Characteristic Values min. typ. max. R25 B25/50 T = 25°C 4.75 5.0 3375 5.25 kΩ K Module Symbol Conditions TVJ TJM Tstg operating VISOL Maximum Ratings -40...+125 150 -40...+125 °C °C °C IISOL ≤ 1 mA; 50/60 Hz 2500 V~ Md Mounting torque (M5) 2.7 - 3.3 Nm Symbol Conditions Characteristic Values min. typ. max. Rpin-chip 5 dS dA Creepage distance on surface Strike distance in air RthCH with heatsink compound Weight 6 6 mΩ mm mm 0.02 K/W 180 g 0619 Dimensions in mm (1 mm = 0.0394") © 2006 IXYS All rights reserved 4-4