MX6895BE

IXYS Features • • • • • • • Full Bridge Gate Driver Internal high voltage level shift function Negative 550V Lamp Supply Voltage 3V to 12V CMOS Logic Compatible External Dead Time Control 8V to 12V Input Supply Voltage No External Bootstrap Capacitors MX6895 -550V Full Bridge Gate Driver General Description The MX6895 features our high voltage integrated circuit (HVIC) technology integrating high and low side N-channel power MOSFET drivers in a full bridge configuration. The circuit is intended as a commutator for High Intensity Discharge (HID) lamps. Applications • Commutator for High Intensity Discharge Lamps Vehicle Head Lamps Outdoor/Street Lighting Multimedia Projectors Retail Accent Lighting Warehouse Lighting Ordering Information Part No. Description MX6895BE SOIC-16 Tube MX6895BETR SOIC-16 Tape & Reel Qt y 49 2500 Functional Block Diagram and Typical Application Circuit MX6895 VDD 8 VDD GND 16 1 GND INA INB 7 6 INA INB G2 CONTROL LOGIC GATE DRIVERS G1 A1 A2 G4 14 M1 13 IGNITER M2 2 4 11 9 M3 -550VDC M4 VPP G3 VPP MX6895 Drawing No.689509 1 PRELIMINARY 10/18/07 www.claremicronix.com MX6895 Absolute Maximum Ratings (Voltages with respect to GND=0V) Parameter Power Supply Voltage Lamp Supply Voltage Input Voltage Gate Driver Output Voltage Power Dissipation Storage Temperature Operating Junction Temp Thermal Resistance (Junction to Ambient) Input Capacitance of external Power Transistors Note 1: 4 layer PCB IXYS Symbol VDD VPP VINA, VINB (VG1-VA1) (VG2-VA2) (VG3-VPP) (VG4-VPP) PTOT TSTG TJ RθJA CISS(LOAD) Min -0.3 -0.3 -0.3 Max 15 -600 VDD+0.3V 20 1 150 150 Unit V V V V W Co Co Co/W nF Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and affect its reliability. -50 42 Typical (NOTE 1) 0.4 1.5 Pin Description Pin No. Pin Name 1 G2 2 A2 3 NC 4 G4 5 NC 6 INB 7 INA 8 VDD 9 VPP 10 NC 11 G3 12 NC 13 A1 14 G1 15 NC 16 GND Description High Side Gate Driver 2 Output High Side Gate Driver 2 Floating DC Power Return No Connect Low Side Gate Driver 4 Output No Connect Control Input for High Side Driver 2 and Low Side Driver 3 Control Input for High Side Driver 1 and Low Side Driver 4 Logic Power Supply High Voltage Negative Lamp Supply No Connect Low Side Gate Driver 3 Output No Connect High Side Gate Driver 1 Floating DC Power Return High Side Gate Driver 1 Output No Connect Ground NOTE: The Exposed Thermal Pad of the device package must be connected to Ground. ESD Warning ESD (electrostatic discharge) sensitive device. Although the MX6895 features proprietary ESD protection circuitry, permanent damage may be sustained if subjected to high energy electrostatic discharges. Proper ESD precautions are recommended to avoid performance degradation or loss of functionality. MX6895 Drawing No.689509 2 PRELIMINARY 10/18/07 www.claremicronix.com MX6895 Operating Range (Voltages with respect to GND=0V) Parameter Power Supply Voltage Lamp Supply Voltage Logic Input Voltage High Logic Input Voltage Low Ambient Temperature Symbol VDD VPP VINAH, VINBH VINAL, VINBL TA Min 8 -50 2.5 0 -40 Typ 10 VDD 0 Max 12 -550 VDD 0.5 105 Unit V V V V Co IXYS DC Electrical Characteristics TA=25oC, unless otherwise specified. Parameter Power Supply Current Power Supply Current Power Supply Current High Input Current Low Input Current High Side Gate Driver Output Voltage High Side Gate Driver Output Voltage Low Side Gate Driver Output Voltage High Side Gate Driver Output Source Current Symbol IDD IPP IDD IINAH IINBH IINAL IINBL (VG1-VA1) (VG2-VA2) (VG1-VA1) (VG2-VA2) (VG3-VPP) (VG4-VPP) (IG1, IG2) Low Side Gate Driver Output Source Current (IG3, IG4) Condition VDD = 10V, VPP = -85V VINA = VDD, VINB = VDD VDD = 10V, VPP = -85V VINA = VDD , VINB = VDD VDD = 10V, VPP = -85V VINA = 2.5V, VINB = 2.5V VINAH = 10V VINBH = 10V VINAL = 0V VINBL = 0V VDD = 8V, VPP = -85V VA1, VA2 = 0V VDD = 10V, VPP = -85V VA1, VA2 = 0V VDD = 8V to 10V VPP = -85V VDD = 10V, VPP = -85V VA1, VA2 = 0V VG1 - VA1 = 0V VG2 - VA2 = 0V VDD = 8V to 10V VPP = -85V VG3-VPP = 0V VG4-VPP = 0V Min Typ 1 0.8 1.5 Max 2 2 4 10 10 Unit mA mA mA µA µA V V V 7.0 9.0 7.0 15.0 8.0 10.0 18.0 4.5 mA 15.0 mA MX6895 Drawing No.689509 3 PRELIMINARY 10/18/07 www.claremicronix.com MX6895 AC Electrical Characteristics VDD = 10V, VPP = -85V, VA1 = VA2 = 0V, TA=25oC, unless otherwise specified. Parameter Symbol Condition Min Operating Frequency fOP High Side ON Time @ VOUT=5V tONH CLOAD = 1.0nF High Side OFF Time @ VOUT=2V tOFFH CLOAD = 1.0nF Low Side ON Time @ VOUT=5V tONL CLOAD = 1.0nF Low Side OFF Time @ VOUT=2V tOFFL CLOAD = 1.0nF Notes: 1. VOUT is the voltage on CLOAD at the defined time. 2. VOUT = VG1-VA1, or VOUT = VG2-VA2, or VOUT = VG3-VPP, or VOUT = VG4-VPP IXYS Typ 0.5 2.7 0.4 1.0 0.3 Max Unit KHz µS µS µS µS AC Test Circuit VDD 8 VDD GND 16 1 14 13 2 4 11 9 CLOAD CLOAD VG3VPP VG4VPP VPP CLOAD CLOAD VA2 VG1-VA1 VG2-VA2 GND MX6895 INA INB 7 6 INA INB G2 G1 A1 A2 G4 G3 VPP AC Switching Waveforms MX6895 Drawing No.689509 4 PRELIMINARY 10/18/07 www.claremicronix.com MX6895 Function Block Diagram IXYS MX6895 VDD G1 A1 INA CONTROL LOGIC INB G3 G2 A2 G4 VPP GND Function Table INA LOW HIGH LOW HIGH INB LOW LOW HIGH HIGH G1 - A1 LOW HIGH LOW LOW G2- A2 LOW LOW HIGH LOW G3 - VP LOW LOW HIGH LOW G4 - VPP LOW HIGH LOW LOW MX6895 Drawing No.689509 5 PRELIMINARY 10/18/07 www.claremicronix.com MX6895 Input / Output Switching Waveforms VINA High IXYS Low VINB High t Low tDEAD V G1 - A 1 VG4-VPP t tON V G2 - A 2 VG3-VPP t tOFF t MX6895 Drawing No.689509 6 PRELIMINARY 10/18/07 www.claremicronix.com MX6895 SOIC-16 IXYS L2 LAYOUT NOTES: 1. ON THE PCB L2 MUST BE ≥ 0.043 INCHES IXYS Corporation makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS’ Standard Terms and Conditions of Sale, IXYS Corporation assumes no liability whatsoever, and disclaims any expressed or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. MX6895 Drawing No.689509 7 10/18/07 www.claremicronix.com PRELIMINARY IX Y S IXYS Corporation 3540 Bassett Street Santa Clara, CA 925054 Tel: 1-408-982-0700 Fax: 1-408-496-0670 e-mail:sales@ixys.net Micronix An IXYS Company 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 World Wide Sales Offices United Kingdom IXYS Semiconductor Limited Langley Park Way Langley Park Chippenham Wiltshire SN 15 1GE - England Tel: 44-1249-444524 Fax: 44-1249-659448 sales@ixys.co.uk Sales Offices ASIA / PACIFIC Asian Headquarters IXYS Room 1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6368 bradley.green@ixys.co.uk Jhong@clare.com SALES OFFICES AMERICAS Eastern Region [Eastern North America, Mexico, South America] IXYS Corporation Beverly, MA Tel: 508-528-6883 Fax: 508-528-4562 wgh@ixys.net Central Region [Central North America] IXYS Corporation Greensburg, PA Tel: 724-836-8530 Fax: 724-836-8540 neil.lejeune@westcode.com Western Region [Western North America] IXYS Corporation Solana Beach, CA Tel: 858-792-1101 slodor@ix.netcom.com SALES OFFICES EUROPE European Headquarters IXYS Semiconductor GMBH Edisonstrasse 15 D- 68623 Lampertheim Germany Tel : 49-6206-503203 Fax: 49-6206-503286 marcom@ixys.de http://www.claremicronix.com IXYS cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this IXYS product. No circuit patent licenses nor indemnity are expressed or implied. IXYS reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person. Specification: MX6895 ©Copyright 2007, IXYS Corporation All rights reserved. Printed in USA. MX6895 Drawing No.689509 8 PRELIMINARY 10/18/07 www.claremicronix.com