PLA172P

PLA172P 800V Normally-Open Single-Pole 6-Pin OptoMOS® Relay INTEGRATED CIRCUITS DIVISION Parameter Load Voltage Load Current On-Resistance (max) Input Control Current Rating 800 100 85 50 2 Description Units VP mArms mADC  mA IXYS Integrated Circuits' PLA172P is a single-pole, normally-open (1-Form-A) Solid State Relay, rated for operation up to 105ºC, that uses optically coupled MOSFET technology to provide an enhanced input to output isolation of 5000Vrms. Features • Guaranteed Specifications at 105ºC • -40ºC to +105ºC Operational Temperature Range • 5mA Input Control Current Over Operating Temperature Range • 800VP Blocking Voltage • 6.8mm Pad-to-Pad Separation of Output Pins • 5000Vrms Input/Output Isolation • Small Surface Mount Package • Arc-Free With No Snubbing Circuits • No EMI/RFI Generation • Flammability Rating UL 94 V-0 Applications • • • • • • • • Industrial Controls Instrumentation Multiplexers Data Acquisition Electronic Switching I/O Subsystems Meters (Watt-Hour, Water, Gas) Medical Equipment—Patient/Equipment Isolation The unique device pinout provides more than 6.8mm of pad-to-pad separation between the high voltage output pins. Control of the optically coupled output is by the input infrared LED. The PLA172P is designed to replace electromechanical relays, and provides bounce-free switching in a compact, surface-mount package. Approvals • UL Approval Pending • EN/IEC 60950-1 Approval Pending Ordering Information Part # PLA172P PLA172PTR Description 6-Pin (8-Pin Body) Flatpack (50/Tube) 6-Pin (8-Pin Body) Flatpack, Tape & Reel (1000/Reel) Pin Configuration AC/DC Configuration NC + Control – Control NC 1 8 Load 2 3 5 4 Load Switching Characteristics of Normally-Open Devices Form-A IF 90% 10% ILOAD ton DS-PLA172P-R02 www.ixysic.com toff 1 INTEGRATED CIRCUITS DIVISION PLA172P Absolute Maximum Ratings (@ 25ºC Unless otherwise noted) Parameter Blocking Voltage (-40ºC to +105ºC) Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Output Power Dissipation AC Load Current 2 DC Load Current 3 Isolation Voltage, Input to Output (60 Seconds) Operational Temperature Storage Temperature 1 2 3 Ratings 800 5 50 1 150 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Units VP V mA A mW 890 667 5000 -40 to +105 -40 to +125 Typical values are characteristic of the device at the specified temperatures and are the result of engineering evaluations. They are provided for information purposes only and are not part of the manufacturing testing requirements. mW Vrms °C °C Derate linearly 1.33 mW / ºC Derate linearly 8.9 mW / ºC Derate linearly 6.67 mW / ºC Electrical Characteristics Parameter Conditions Output Characteristics @ 25°C Load Current IF=2mA AC 1 Continuous DC 2 Peak t=10ms On-Resistance 3 IF=2mA, IL= 100mA IF=2mA, IL=1mA Off-State Leakage Current VL=800VP Switching Speeds Turn-On IF=5mA, IL=100mA Turn-Off Output Capacitance IF=0mA, VL=20V, f=1MHz Output Characteristics @ 105°C On-Resistance 3 IF=5mA, IL=30mA IF=5mA, IL=1mA Off-State Leakage Current VL=800VP Switching Speeds Turn-On IF=5mA, IL=30mA Turn-Off Input Characteristics @ 25°C IL=100mA Input Control Current to Activate 4 Input Control Current to Deactivate Input Voltage Drop IF=5mA Reverse Input Current VR=5V Input Characteristics @ 105°C Input Control Current to Activate IL=30mA Common Characteristics @ 25°C Input to Output Capacitance VIO=0V, f=1MHz 1 2 3 4 2 Symbol Min Typ Max Units 37 57 - 100 85 ±350 50 85 1 mArms mADC mAP ILEAK - ton toff COUT - 1.2 0.5 10 5 5 - ILEAK - 70 110 - 110 140 5 ton toff - - 10 10 ms IF IF VF IR 0.05 0.9 - 0.35 1.2 - 2 1.5 10 mA mA V A IF - - 5 mA CIO - 1 - pF IL ILPK RON RON  µA ms pF  µA Load derates linearly from 100mA @ 25oC to 44mA @105oC (0.7mA/ºC). Load derates linearly from 85mA @ 25ºC to 38mA @ 105ºC (0.59mA/ºC). Measurement taken within 1 second of on-time. For applications requiring high temperature operation (greater than 60oC) a minimum LED drive current of 5mA is recommended. www.ixysic.com R02 INTEGRATED CIRCUITS DIVISION PLA172P PERFORMANCE DATA* 20 15 10 5 Device Count (N) 20 20 15 10 15 10 5 5 0 0 1.200 1.204 1.208 1.212 1.216 1.220 1.224 LED Forward Voltage (V) 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.55 LED Forward Current (mA) Typical On-Resistance (N=50, IF=5mA, IL=1mA) Typical Turn-On Time (N=50, IF=5mA, IL=100mA) 15 10 5 5 0 50.5 51 51.5 52 52.5 53 On-Resistance (:) 53.5 0.50 20 15 10 5 0 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 Turn-On Time (ms) Typical On-Resistance (N=50, IF=5mA, IL=100mA) 25 0.40 0.45 0.50 0.55 0.60 0.65 Turn-Off Time (ms) 0.70 Typical Blocking Voltage Distribution (N=50) 20 20 Device Count (N) Device Count (N) 54 0.25 0.30 0.35 0.40 0.45 LED Forward Current (ms) Typical Turn-Off Time (N=50, IF=5mA, IL=100mA) 25 10 0 0.20 Device Count (N) 15 Device Count (N) 20 15 10 5 0 15 10 5 0 33.0 33.5 34.0 34.5 35.0 On-Resistance (:) 6 IF=50mA IF=10mA IF=5mA IF=2mA 1.3 1.2 952 960 968 976 984 Blocking Voltage (VP) 1.1 5 4 3 2 992 Turn-Off Time vs. LED Forward Current (IL=100mA) 2.0 Turn-Off Time (ms) 7 1.5 Turn-On Time (ms) 1.6 1.4 35.5 Turn-On Time vs. LED Forward Current (IL=100mA) LED Forward Voltage Drop vs. Temperature LED Forward Voltage (V) Typical IF for Switch Dropout (N=50, IL=100mA) 25 0 Device Count (N) Typical IF for Switch Operation (N=50, IL=100mA) 30 Device Count (N) Device Count (N) 25 Typical LED Forward Voltage Drop (N=50, IF=5mA) 1.5 1.0 0.5 1 0 1.0 -50 -25 0 25 50 75 Temperature (ºC) 100 125 0.0 0 10 20 30 40 LED Forward Current (mA) 50 0 10 20 30 40 LED Forward Current (mA) 50 *Unless otherwise noted, data presented in these graphs is typical of device operation at 25ºC. For guaranteed parameters not indicated in the written specifications, please contact our application department. R02 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION PLA172P PERFORMANCE DATA* Turn-On Time vs. Temperature (IL=40mA) Deactivate 1.0 8 0.8 6 IF=5mA 4 IF=10mA 2 25 50 75 Temperature (ºC) 100 On-Resistance vs. Temperature (IF=5mA, t